Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Planmeca Oy Address Asentajankatu 6, 00880 Helsinki, Finland Grantee Code YII FCC ID -XFIRC2024 Authorized Contact Name Harri Karppi Contact Email [email protected] Contact Phone +358407149338 I , the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in ac cordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made i n t his application, the Applicant is responsible for: (1)labeling the equipment with the exact FCC ID as specified in this application, (2)compliance statement labeling pursuant to the applicable rules, (3)compliance of the equipment with the applicable technical rules, c )if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensur e t hat production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsibl e par ty and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements . (1 )the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2)the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3)the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS , FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. S ee 47C FR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions . Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Planmeca Oy certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Planmeca Oy certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 3.7.2024 Print Name: Harri Karppi Title: Program Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database
UNITED STATES DESIGNATED AGENT LETTER Date: 3.7.2024 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Company Name: FRN: Planmeca Oy 0026226316 Company does not have FRN number because company does not have any other business with FCC other than acting as a designated agent. Grantee Code: YII Contact Name: Harri Karppi Contact Name: Address: Asentajankatu 6 Address: City/Province/Zi p: Helsinki 00880 City/Province/Zip: Telephone: +358407149338 Telephone: Fax: Fax: Email: [email protected] m Email: Planmeca USA Inc. Glen Kendrick 11727 Fruehauf Dr Charlotte, North Carolina 28273 +312-668-7869 Glen.kendrick@pla nmecausa.com Applicable Equipment: FCC ID: YII-XFIRC2024 ATTN: Director of Certification: We, Planmeca Oy and Planmeca USA Inc. understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Planmeca Oy, and Planmeca Inc. acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Harri Karppi Glen Kendrich Program Manager, X-ray division President, Planmeca Inc. Signature: Signature:
Planmeca Oy To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Planmeca Oy Asentajankatu 6 00880, Helsinki, Finland Regarding: Confidentiality Request regarding application for FCC ID YII-XFIRC2024 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Parts List / BOM The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Harri Karppi Program Manager Planmeca Oy
4. Docking station bottom, with LABEL location
Reference number: HELEM2304000153-4 v1.1 Page 1 of 10 These test results are valid for the tested unit only. This report shall not be reproduced, except in full, without a written permission of SGS Fimko. Test Report HELEM2304000153-4 RF exposure evaluation Equipment Under Test: Docking Station with wireless charging Model: Docking Station Customer / Manufacturer: Planmeca Oy Asentajankatu 6 FI-00880 Helsinki Finland FCC Rule Part: 47 CFR PART 1, Subpart I, Section 1.1310 47 CFR PART 1, Subpart I, Section 2.1091 KDB 680106 D01 Wireless Power Transfer v04 Date: 12 September 2024 Date: 12 September 2024 Issued by: Checked by: Juha Sundholm Rauno Repo Project Manager Senior EMC Specialist Reference number: HELEM2304000153-4 v1.1 Page 2 of 10 TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS ....................................................................................................................................... 2 GENERAL REMARKS .......................................................................................................................................... 3 Disclaimer ........................................................................................................................................................ 3 RELEASE HISTORY ............................................................................................................................................ 4 PRODUCT DESCRIPTION .................................................................................................................................. 5 Equipment Under Test .................................................................................................................................... 5 General Description ......................................................................................................................................... 5 Ratings and declarations ................................................................................................................................. 5 Power Supply .................................................................................................................................................. 5 Cables ............................................................................................................................................................. 5 Peripherals ...................................................................................................................................................... 5 SUMMARY OF TESTING ..................................................................................................................................... 6 EUT Test Conditions during Testing ............................................................................................................... 6 Test Facility ..................................................................................................................................................... 7 LIMITS .................................................................................................................................................................. 8 TEST RESULTS ................................................................................................................................................... 9 Maximum Permissible Exposure ..................................................................................................................... 9 TEST EQUIPMENT .............................................................................................................................................. 10 Reference number: HELEM2304000153-4 v1.1 Page 3 of 10 Disclaimer GENERAL REMARKS Disclaimer This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Reference number: HELEM2304000153-4 v1.1 Page 4 of 10 Release History RELEASE HISTORY Version Changes Issued 1.0 Initial release 5 August 2024 1.1 Charge load information added to page 6. 12 September 2024 Reference number: HELEM2304000153-4 v1.1 Page 5 of 10 PRODUCT DESCRIPTION PRODUCT DESCRIPTION Equipment Under Test Equipment Under Test: Docking Station Model: Docking Station Type: - Trademark: Planmed XFI Serial no: - FCC ID: - IC: - Radio module or chip: Renesas P9241-G General Description The EUT is a charging station for a remote controller. Classification Fixed device Mobile Device (Human body distance > 20cm) Portable Device (Human body distance < 20cm) Modifications Incorporated in the EUT No modifications. Ratings and declarations Operating Frequency Range (OFR): 120 - 148 kHz Antenna: Integral Power Supply Operating voltage: 24 VDC Maximum Current: 200 mA Cables Cable: Length: Type: Power Supply Cable 1 m LN Peripherals Peripheral Description / Use Remote Con…
Text truncated - open the document above for the full version.
Reference number: HELEM2304000153-3 v1.1 Page 1 of 15 These test results are valid for the tested unit only. This report shall not be reproduced, except in full, without a written permission of SGS Fimko. Test Report HELEM2304000153-3 v1.1 INTENTIONAL RADIATOR TESTS ACCORDING TO FCC PART 15 C Equipment Under Test: Docking Station with wireless charging Model: Docking Station Customer / Manufacturer: Planmeca Oy Asentajankatu 6 FI-00880 Helsinki Finland FCC Rule Part: 15.207, 15.209, 15.215 Date: 13 September 2024 Date: 13 September 2024 Issued by: Checked by: Rauno Repo Henri Mäki Senior EMC Specialist Testing Engineer Reference number: HELEM2304000153-3 v1.1 Page 2 of 15 TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS ....................................................................................................................................... 2 GENERAL REMARKS .......................................................................................................................................... 3 Disclaimer ........................................................................................................................................................ 3 RELEASE HISTORY ............................................................................................................................................ 4 PRODUCT DESCRIPTION .................................................................................................................................. 5 Equipment Under Test .................................................................................................................................... 5 General Description ......................................................................................................................................... 5 Ratings and declarations ................................................................................................................................. 5 Power Supply .................................................................................................................................................. 5 Cables ............................................................................................................................................................. 5 Peripherals ...................................................................................................................................................... 5 SUMMARY OF TESTING ..................................................................................................................................... 6 EUT Test Conditions during Testing ............................................................................................................... 6 Test Facility ..................................................................................................................................................... 7 TEST RESULTS ................................................................................................................................................... 8 Antenna Requirement ..................................................................................................................................... 8 AC Power-Line Conducted Emissions ............................................................................................................ 9 Radiated Emissions 9 kHz to 1 GHz ............................................................................................................... 11 20 dB Emission Bandwidth .............................................................................................................................. 14 TEST EQUIPMENT .............................................................................................................................................. 15 AC Power-Line Conducted Emissions ............................................................................................................ 15 Radiated tests.................................................................................................................................................. 15 Reference number: HELEM2304000153-3 v1.1 Page 3 of 15 Disclaimer GENERAL REMARKS Disclaimer This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Reference number: HELEM2304000153-3 v1.1 Page 4 of 15 Release History RELEASE HISTORY Version Changes Issued 1.0 Initial release 29 May 2023 1.1 Information regarding EUT load level during testing added to section “EUT Test Conditions during Testing”. AC Power-Line Conducted Emissions test results and equipment added. Measurement loop antenna orientation corrected in Radiated Emissions test results. 13 September 2024 Reference number: HELEM2304000153-3 v1…
Text truncated - open the document above for the full version.
Reference number: HELEM2304000153-4 v1.1 Page 1 of 10 These test results are valid for the tested unit only. This report shall not be reproduced, except in full, without a written permission of SGS Fimko. Test Report HELEM2304000153-4 RF exposure evaluation Equipment Under Test: Docking Station with wireless charging Model: Docking Station Customer / Manufacturer: Planmeca Oy Asentajankatu 6 FI-00880 Helsinki Finland FCC Rule Part: 47 CFR PART 1, Subpart I, Section 1.1310 47 CFR PART 1, Subpart I, Section 2.1091 KDB 680106 D01 Wireless Power Transfer v04 Date: 12 September 2024 Date: 12 September 2024 Issued by: Checked by: Juha Sundholm Rauno Repo Project Manager Senior EMC Specialist Reference number: HELEM2304000153-4 v1.1 Page 2 of 10 TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS ....................................................................................................................................... 2 GENERAL REMARKS .......................................................................................................................................... 3 Disclaimer ........................................................................................................................................................ 3 RELEASE HISTORY ............................................................................................................................................ 4 PRODUCT DESCRIPTION .................................................................................................................................. 5 Equipment Under Test .................................................................................................................................... 5 General Description ......................................................................................................................................... 5 Ratings and declarations ................................................................................................................................. 5 Power Supply .................................................................................................................................................. 5 Cables ............................................................................................................................................................. 5 Peripherals ...................................................................................................................................................... 5 SUMMARY OF TESTING ..................................................................................................................................... 6 EUT Test Conditions during Testing ............................................................................................................... 6 Test Facility ..................................................................................................................................................... 7 LIMITS .................................................................................................................................................................. 8 TEST RESULTS ................................................................................................................................................... 9 Maximum Permissible Exposure ..................................................................................................................... 9 TEST EQUIPMENT .............................................................................................................................................. 10 Reference number: HELEM2304000153-4 v1.1 Page 3 of 10 Disclaimer GENERAL REMARKS Disclaimer This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Reference number: HELEM2304000153-4 v1.1 Page 4 of 10 Release History RELEASE HISTORY Version Changes Issued 1.0 Initial release 5 August 2024 1.1 Charge load information added to page 6. 12 September 2024 Reference number: HELEM2304000153-4 v1.1 Page 5 of 10 PRODUCT DESCRIPTION PRODUCT DESCRIPTION Equipment Under Test Equipment Under Test: Docking Station Model: Docking Station Type: - Trademark: Planmed XFI Serial no: - FCC ID: - IC: - Radio module or chip: Renesas P9241-G General Description The EUT is a charging station for a remote controller. Classification Fixed device Mobile Device (Human body distance > 20cm) Portable Device (Human body distance < 20cm) Modifications Incorporated in the EUT No modifications. Ratings and declarations Operating Frequency Range (OFR): 120 - 148 kHz Antenna: Integral Power Supply Operating voltage: 24 VDC Maximum Current: 200 mA Cables Cable: Length: Type: Power Supply Cable 1 m LN Peripherals Peripheral Description / Use Remote Con…
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 0.118 MHz - 0.148 MHz | - |