YLNY5010-AFleet Management System

Rev. 3 YouniVu User Manual ___________________________________________________________________________ ___________________________________________________________________ CS-FM-001 Page 1 of 28 Customer Services © Younivate 2010. All rights reserved. YouniVu™ USER MANUAL Younivate 165 King Abdullah II St. Amman – Jordan Tel. +962 6 533-4680 Fax. +962 6 533-3507 Rev. 3 www.younivate.com Rev. 3 YouniVu User Manual ___________________________________________________________________________ ___________________________________________________________________ CS-FM-001 Page 2 of 28 Customer Services © Younivate 2010. All rights reserved. TABLE OF CONTENTS 1 INTRODUCTION ............................................................................ 5 1.1 Overview of GPS ............................................................................... 5 1.2 YouniVu™ Functionality Overview ..................................................... 5 2 YouniVu™ SOLUTION COMPONENTS ............................................. 6 3 YouniVu™ SOLUTION FEATURES ................................................... 7 4 SAFETY ......................................................................................... 8 5 HARDWARE INSTALLATION .......................................................... 9 5.1 DLD Installation Verification ............................................................. 9 5.2 DRS Installation Verification ............................................................. 9 6 VEHICLE MONITOR SOFTWARE ................................................... 10 6.1 VehicleMonitor Server ..................................................................... 10 6.1.1 System Requirements .............................................................................. 10 6.1.2 Installation ............................................................................................. 10 6.1.3 Getting Around the Server Application ........................................................ 11 6.1.4 Server Page ........................................................................................... 12 6.1.5 Server Configuration Settings ................................................................... 13 6.1.6 Vehicles Page ......................................................................................... 14 6.1.7 Groups Page ........................................................................................... 15 6.1.8 Coordinators Page ................................................................................... 16 6.1.9 Network-Related Configuration Parameters ................................................. 18 6.1.10 Server-Related Configuration Parameters ................................................ 21 6.1.11 Monitoring Connected Coordinators ......................................................... 22 6.2 VehicleMonitor Viewer .................................................................... 23 6.2.1 System Requirements .............................................................................. 23 6.2.2 Installation ............................................................................................. 23 6.2.3 Getting Around the Viewer Application ........................................................ 24 6.2.4 Reports Page .......................................................................................... 26 7 TECHNICAL SUPPORT ................................................................. 28 Rev. 3 YouniVu User Manual ___________________________________________________________________________ ___________________________________________________________________ CS-FM-001 Page 3 of 28 Customer Services © Younivate 2010. All rights reserved. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The DLD device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Warning: The Device has both GPS and Zigbee Antennas build in internally. Thus, the installation of the device shall have a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Rev. 3 YouniVu User Manual ___________________________________________________________________________ ___________________________________________________________________ CS-FM-001 Page 4 of 28 Customer Services © Younivate 2010. All rights reserved. Rev. 3 YouniVu User Manual ___________________________________________________________________________ ___________________________________________________________________ CS-FM-001 Page 5 of 28 Customer Services © Younivate 2010. All right…

Text truncated - open the document above for the full version.

Rev. 0 Setup and Test Plan for CE & FCC Testing & Verification ___________________________________________________________________________ Setup and Test Plan for CE & FCC Testing & Verification ALBAHITH Technologies (Younivate) 165 King Abdullah II St. Amman – Jordan Tel. +962 6 533-4680 Fax. +962 6 533-3507 Revision: Rev. 0 www.younivate.com TP-001/2010 Page 1 of 15 Design and Development © Younivate, 2010. All rights reserved. Rev. 0 Setup and Test Plan for CE & FCC Testing & Verification ___________________________________________________________________________ TP-001/2010 Page 2 of 15 Design and Development © Younivate, 2010. All rights reserved. TABLE OF CONTENTS 1 System Hardware Components..................................................... 3 1.1 DLD Model No. (Y5010-A) ............................................................... 3 1.1.1 Device Wiring and Operating Modes ................................................. 3 1.1.2 DLD Block Diagram ........................................................................ 3 1.1.3 Specifications................................................................................ 4 1.2 DRS Model No. (Y5030-C) ............................................................... 5 1.2.1 Device Wiring and Operating Modes ................................................. 5 1.2.2 Block diagram ............................................................................... 5 1.2.3 Specifications................................................................................ 6 1.3 CED Model No. (Y5031-C) ............................................................... 6 1.3.1 Device Wiring and Operating Modes ................................................. 6 1.3.2 Block Diagram............................................................................... 7 1.3.3 Specifications................................................................................ 7 2 Testing Tools and Operation......................................................... 8 2.1 Tools List ........................................................................................ 8 2.2 Function Testing ............................................................................. 8 2.2.1 ZigBee Function Mode Testing ......................................................... 8 2.2.2 GPS Function Mode Testing (DLD Only)............................................12 2.2.3 Ethernet Function .........................................................................13 2.2.4 Overall System Operation ..............................................................13 3 SAMPLE DETAILS........................................................................ 14 3.1 DLD (Y5010-A) ............................................................................. 14 3.2 DRS (Y5030-C) ............................................................................. 15 3.3 CED (Y5031-C).............................................................................. 15 Rev. 0 Setup and Test Plan for CE & FCC Testing & Verification ___________________________________________________________________________ 1 System Hardware Components The over all system consists of two basic devices Data Logging Device (DLD) and Data Routing System (DRS), and one supporting device called Coverage Extending Device (CED). 1.1 DLD Model No. (Y5010-A) 1.1.1 Device Wiring and Operating Modes The DLD is installed inside the vehicle and needs a three-wire connection (Power or PRW, Ground or GND, and Ignition or IGN) with two operational modes depending on the ignition status: 1- GPS data logging mode which operates only when the vehicle ignition is ON (high) 2- ZigBee function mode which operates only when the ignition is OFF (low) When the car ignition is ON, the DLD is in the GPS data logging mode collecting data and storing them in the built-in SD memory. When the car ignition is OFF, the DLD switches to the ZigBee function mode listening to the DRS messages; if a DRS is detected, the DLD will start transmitting the new GPS logs to the DRS. 1.1.2 DLD Block Diagram Power Supply SOC ZigBee CC2430 SD Memory GPS Module PA/LNA μcontroller RF External Memory IGN PW R GND GPS Internal Antenna ZigBee Internal Antenna Figure 1: DLD Block Diagram 1.1.2.1 Power Supply The power supply block consists of three functions inside: • DC-DC converter - input voltage of 8-32 Volts and output of 3.3 Volts. TP-001/2010 Page 3 of 15 Design and Development © Younivate, 2010. All rights reserved. Rev. 0 Setup and Test Plan for CE & FCC Testing & Verification ___________________________________________________________________________ TP-001/2010 Page 4 of 15 Design and Development © Younivate, 2010. All rights reserved. • Supervisory circuit to give an input voltage window from 8-32 Volts for protecting the device from voltage faults. In case of a fault occurrence, this will instruct the microcontroller to hold till the fault disappears. • Ignition indicator connected to the microcontroller via an optocoupler for controlling the DLD mode of operation: “high” for GPS mode and “low” for ZigBee mode. 1.1.2.2 SOC ZigBee It is System-on-Chip IC with the following built-in functions: • Microcontroller with flash running the ZigBee protocol and the Device Application that controls the device state machine. • RF Transceiver with transmitter output power controlled from -25 dBm to 0 dBm, the device operates on time duplex mode. 1.1.2.3 RF PA/LNA Front End RF IC which contains fixed amplification PA of 20 dB gain with LNA and RF switches for duplexing function. 1.1.2.4 SD Memory Removable 2G microSD memory for storing the GPS Data. 1.1.2.5 External Memory Used during over-the-air firmware upgrade. 1.1.2.6 GPS Module High sensitivity GPS Receiver that decodes the GPS signal and sends it to the microSD memory serially through the microcontroller. 1.1.3 Specifications 1.1.3.1 Modulation The device uses FHSS over 15 frequency channels with 5 MHz spacing and a dwell time of…

Text truncated - open the document above for the full version.

ALB A 165 Kin P.O. BOX 5 SP006 Att. 1 AHITH TEC ng abdullah II St Attentio n Subject: Dear Sir: SGS-CS T behalf, un (ATCB). We certif y Section 53 CFR 1.20 Thank yo u Agency A By: (Signatur e Title: On behal f (Company Telephon e America n 6731 Wh Suite C1 McLean, 5094, Amman 1B Rev. 1 15 Au CHNOLOG treet, Amman, J n: To Whom Authority t o TC Standards ntil otherwise y that we are 301 of the A 02 (b), to th e u, Agreement Ex e1) Sour c f of: ALBA y Name) e: +962 n Telecomm hittier Aven 10 VA 22101 n, 11953, Jord ug 2010 GIES Co Jordan Tel: +96 It May Conc o Act as Ag s Technical S e notified, for e not subject nti-Drug Ab u e application xpiration Dat cing and Proc AHITH TECH 6 533-4680 munication ue an 62 6 533-4680 F cern ent Services Co. applications to denial of f use Act of 19 is subject to te: 12 m curement Dir HNOLOGIES Certificatio Fax: +962 6 533 ., Ltd. (SGS) s to American federal bene 988, 21 U.S.C o denial of fe months N (P rector Known as “ Y on Body, In 3-3507 Shenzhen B n Telecommu fits, that incl C. 862. Furth deral benefit Nidal Sowan Print name) Younivate” c. Branch is aut unication Ce udes FCC be her, no party ts, that includ Date: 15-08 thorized to a ertification Bo enefits, purs y, as defined des FCC ben 8-2010 ct on our ody, Inc. uant to in 47 nefits.

P.O. BOX 5094, Amman, 11953, Jordan SP006 Att. 1B Rev. 1 15 Aug 2010 ALBAHITH TECHNOLOGIES Co 165 King abdullah II Street, Amman, Jordan Tel: +962 6 533-4680 Fax: +962 6 533-3507 Attention: To Whom It May Concern Subject: Request for Confidentiality Subject: Confidentiality Request for FCC ID: YLNY5010-A Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent * User’s Manual *Note: ______(Insert Explanation as Necessary)______ ALBAHITH TECHNOLOGIES Co. known as "Younivate" has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. 1 ‐ The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit‐But‐Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non‐removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 1 ‐ Please refer to http://atcb.com/publicdocs/Memo‐Short‐Term‐Vs‐Standard‐Confidentiality.pdf for complete details. 3 ‐ Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. Date: 15-08-2010 American Telecommunication Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 Reference:PD001002 ALB A 165 Kin P.O. BOX 5 SP006 Att. 1 AHITH TEC ng abdullah II St Perman The appl perman e proprieta Short-T The appl from pu b Authoriza informat aware t h product o documen Sincerel y By: S 5094, Amman 1B Rev. 1 15 Au HNOLOG treet, Amman, J nent Confid icant reque ently withhe ary informa erm Confi icant requ e blic view fo ation and p ion prior to hat they are or the prod nts listed ab y, ourcing an n, 11953, Jord ug 2010 GIES Co Jordan Tel: +96 dentiality: ests the ex eld from pu ation not cu dentiality ests the ex r a period o prior to mar o marketing e responsib duct is mad bove for pu d Procurem (Signa an 62 6 533-4680 F : hibits liste d ublic review ustomarily r : hibits sele c of 180 days rketing. Th g or release ble to notify e available ublic disclos ment Directo ture/Title 2 ) Fax: +962 6 533 d above as w due to ma released to cted above s from the his is to avo e of the pro y ATCB in th e to the pub sure pursua or _ ) 3-3507 permanent aterials tha the public as short t e date of the oid prematu oduct to the he event in blic. ATCB ant to FCC ___Nidal So tly confiden t contain tr . erm confide e Grant of E ure release e public. A nformation will then r e Public Notic owan______ (Print na ntial be rade secret ential be wit Equipment e of sensitiv pplicant is regarding t elease the ce DA 04-1 ______ ame) ts and thheld ve also the 1705.

1 Photographs - EUT Constructional Details

Drawn by: AMRO Al-assi Reviewed by: Approved by: Note : Title : DLD CE & FCC Label Date : 2/8/2010 Drawing No PD-Y5010-A-07-0-95 Rev No Y5010-A-LBL-0-10 Younivate * 1 COLOR , 1.5cmX3.2cm , Label Sticker 1.5cm 3.2cm 1.3cm 2.6cm Model: Y5010-A ID:001005DD 001005DD Model: Y5010-A ID:001005DD 001005DD Part # FCC ID: YLNY5010-A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Input: 8-32VDC350mA FCC ID: YLNY5010-A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Input: 8-32VDC350mA FCC ID: YLNY5010-A

[ SGS-CSTC Standards Technical Services Co., Ltd . No. 1 Workshop, M-10, Middle section,Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax:+86 (0) 755 2671 0594 Email:[email protected] Report No.: SZEMO10070422703 Page: 1 of 3 Authorized Signature: Jack Zhang Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connectionwith, distribution or use of the product describedin this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject toits General Conditions of Service printedoverleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 RF Exposure Evaluation declaration Application No.:SZEMO100704227RF Applicant:ALBAHITH TECHNOLOGIES (Known as Younivate) Address of Applicant:165, King Abdullah Second Street Amman, 11953 Jordan Manufacturer:ALBAHITH TECHNOLOGIES (Known as Younivate) ALBAHITH is the ODM/OEM Address of Manufacturer:165, King Abdullah Second Street Amman, 11953 Jordan Factory:We normally subcontract with EMSs. Currently we use the following EMS:(we may use some other EMS in diffcountry) Address of Factory:1-4 Floor, B Building, Shan Li Lang Village Ind, Buji Town Shenzhen 518112, People’s Republic of China. FCC ID:YLNY5010-A Fundamental Carrier Frequency: 2405MHz~2475MHz Equipment Under Test (EUT): Name:Fleet Management System Model No.:Y5010-A Trade Mark:Younivate Date of Receipt:2010-07-07 Date of Test:2010-07-13 to 2010-08-18 Date of Issue:2010-09-15 Test Result : PASS* *In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEMO10070422703 Page: 2 of 3 “This document is issued by the Company subject toits General Conditions of Service printedoverleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration,forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 RF Exposure Evaluation 2.1 Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500----F/3006 1500-100,000----56 300-1500----F/15006 1500-100,000----1300 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEMO10070422703 Page: 3 of 3 “This document is issued by the Company subject toits General Conditions of Service printedoverleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to …

Text truncated - open the document above for the full version.

Authorized Signature: Jack Zhang Laboratory Manager This report refers to the General Conditions for Inspection and Testing Services, printed overleaf This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the SGS PRODUCT CERTIFICATION MARK.. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” SGS-CSTC Standards Technical Services Ltd No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEMO10070422701 Page : 1 of 34 1 Cover Page FCC REPORT Application No: SZEMO100704227RF Applicant: ALBAHITH TECHNOLOGIES (Known as Younivate) Product Name: Fleet Management System Operation Frequency: 2405MHz to 2475MHz FCC ID: YLNY5010-A Standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247: 2008 Date of Receipt: 2010-07-07 Date of Test: 2010-07-13 to 2010-08-18 Date of Issue: 2010-09-15 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” Report No.: SZEMO10070422701 Page : 2 of 34 SGS-CSTC Standards Technical Services Ltd. 2 Contents Page 1 COVER PAGE...................................................................................................................................................... 1 2 CONTENTS.......................................................................................................................................................... 2 3 TEST SUMMARY................................................................................................................................................ 3 4 GENERAL INFORMATION................................................................................................................................ 4 4.1 CLIENT INFORMATION................................................................................................................................... 4 4.2 GENERAL DESCRIPTION OF E.U.T............................................................................................................... 4 4.3 TEST ENVIRONMENT AND MODE................................................................................................................... 5 4.4 TEST FACILITY............................................................................................................................................... 6 4.5 TEST LOCATION............................................................................................................................................ 6 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER.............................................................................. 6 4.7 TEST INSTRUMENTS LIST.........................................................................…

Text truncated - open the document above for the full version.

1 Photo…

Text truncated - open the document above for the full version.