YTK-BPW24Wrist Blood Pressure

Wireless Wrist Blood Pressure Monitor BPW2.4 Boston Life Labs LLC. User Manual for PBW2.4 Wireless Wrist Blood Pressure Monitor II Instructions to User Dear Users, Thank you for purchasing our product. Please read the manual carefully before using this device. Failure to follow these instructions may cause measuring abnormality or equipment damage. The Manual is published in English and Boston Life Labs LLC. has the ultimate right to explain the Manual. No part of this manual may be photocopied, reproduced or translated into another language without the prior written consent. Boston Life Labs LLC. reserves the right to improve and amend it at any time without prior notice. Version of this manual: Ver 1.0 All rights reserved. User Manual for PBW2.4 Wireless Wrist Blood Pressure Monitor III Notes:
The contents contained in this manual are subject to change without notice.
Information furnished by our company is believed to be accurate and reliable. However, no responsibility is assumed by us for its use, or any infringements of patents or other rights of third parties that may result from its use. Instructions for Safe Operations  Read all information in the instruction manual and any other literature included in the box before using the unit.  Contact your physician for specific information about your blood pressure. Follow the instructions of your healthcare provider.  Operate the unit only as intended. Don’t use for any other purpose.  The unit is indented to use in measuring the blood pressure and pulse rate for adult only, not recommended for neonatal baby.  Do not use a cellular near the unit. It may result in operational failure.  Please avoid using in high radiant area in order to make your measurement data correctly. User Manual for PBW2.4 Wireless Wrist Blood Pressure Monitor IV  Necessary maintenance must be performed only by qualified service technicians. Users are not permitted to maintain it by themselves. Cautions  Explosive hazard—DO NOT use the equipment in environment with inflammable gas such as some ignitable anesthetic agents. Warnings  The local law must be followed when disposing of the device. Attentions ֠ Keep the device away from dust, vibration, corrosive substances, explosive materials, high temperature and moisture. ֠ The device should be kept out of the reach of children. ֠ If the equipment gets wet, please stop using it and do not resume operation until it is dry. When it is carried from a cold environment to a warm and humid environment, please do not use it immediately. ֠ DO NOT operate the button on the front panel with sharp materials. User Manual for PBW2.4 Wireless Wrist Blood Pressure Monitor V Table of Contents 1 OVERVIEW ......................................................... 1 1.1 APPEARANCE ................................................... 1 1.2 FEATURES ........................................................ 2 1.3 NAME AND MODEL .......................................... 2 1.4 APPLICATIONS AND SCOPE .............................. 2 2 BATTERY INSTALLATION .............................. 3 3 WIRELESS FUNCTION ..................................... 4 3.1 ENABLE/DISABLE BLUETOOTH ....................... 4 3.2 DATA MANAGEMENT ....................................... 5 4 OPERATION ....................................................... 6 5 MAKE A MEASUREMENT ............................... 8 6 EXCEPTIONAL SITUATIONS ........................ 10 7 TECHNICAL SPECIFICATIONS.................... 12 8 REPAIR AND MAINTENANCE ...................... 13 8.1 MAINTENANCE .............................................. 13 8.2 CLEANING AND DISINFECTING INSTRUCTION14 9 COMMON KNOWLEDGE .............................. 15 User Manual for PBW2.4 Wireless Wrist Blood Pressure Monitor VI 9.1 BLOOD CIRCULATION .................................... 15 9.2 CLASSIFICATION OF BLOOD PRESSURE ......... 15 User Manual for PBW2.4 Wireless Wrist Blood Pressure Monitor -1- 1 Overview 1.1 Appearance Body & Cuff Display Start/Stop Button Wrist Cuff Display Systolic Blood Pressure Diastolic Blood Pressure Unit Indication Pulse Display Low Battery Symbol Inflation/Deflation Symbol or WHO Indication Heartbeat Symbol Wireless Symbol Power 2 AAA Alkaline Batteries User Manual for PBW2.4 Wireless Wrist Blood Pressure Monitor -2- 1.2 Features The Wireless Wrist Blood Pressure Monitor can be used to measure blood pressure Systolic, Diastolic and pulse rate value. The unit uses the oscillometric method of blood pressure measurement. It means the unit detects the movement of your blood through your brachial artery, and converts your blood pressure into a digital reading. The unit is simple to use because a stethoscope is not needed while using an oscillometric monitor.  With MWI (measurement while inflating) technology;  Automatically inflate and deflate;  Automatic send measurement result wirelessly; 1.3 Name and Model Name: Wireless Wrist Blood Pressure Monitor Model: BPW2.4 1.4 Applications and Scope BPW2.4 Wireless Wrist Blood Pressure Monitor is intended to be used by adults at home or medical center to measure Blood Pressure Systolic, Diastolic and pulse rate. User Manual for PBW2.4 Wireless Wrist Blood Pressure Monitor -3- 2 Battery Installation Figure 3 Battery Installation 1. Refer to Figure 3, insert two AAA size batteries into the battery compartment properly in the right direction. 2. Replace the cover. Please take care when you insert the batteries, or the improper insertion may make the device not work. User two identical 1.5V alkaline batteries type AAA LR03. Replace all of the batteries if the symbol of low battery appears on the display. User Manual for PBW2.4 Wireless Wrist Blood Pressure Monitor -4- Never leave any low battery in the battery compartment since they may leak and cause damage to the unit. 3 Wireless Function 3.1 Enable/Disable Bluetooth The state of the Bluetooth will appear after longtime pressing the Start/Stop button. Then press the Start/Stop bu…

Text truncated - open the document above for the full version.

Jan.5, 2011 Federal Communication Commission Authorization and Evaluation Division FCC ID: YTK-BPW24 Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Operational Description 4: Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Boston Life Labs LLC. Contact person: Olivier de La Bastide Title: CTO Tel: +1617440427

PHOTOGRAPHS OF THE EUT TOP VIEW OF SAMPLE BOTTOM VIEW OF SAMPLE LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE FRONT VIEW OF SAMPLE BACK VIEW OF SAMPLE

FCC ID Label Location

INTERNAL PHOTO OF SAMPLE – 1 INTERNAL PHOTO OF SAMPLE – 2 INTERNAL VIEW OF EUT-3 INTERNAL VIEW OF EUT-3

FCC Test Report Report No.: AGC10091012SZ08F1 TEST NAME : FCC Part 15 FCC ID : YTK-BPW24 PRODUCT DESIGNATION : Wrist Blood Pressure BRAND NAME : Boston Life Labs TEST MODEL : BPW 2.4 CLIENT : Boston Life Labs LLC. DATE OF ISSUE : Dec.29, 2010 STANDARD(S) : FCC Part 15 Rules Attestation of Global Compliance Co., Ltd. CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC10091012SZ08F1 Page 1 of 87 VERIFICATION OF COMPLIANCE Applicant: Boston Life Labs LLC. Address Cambridge Innovation Center, One Broadway 14 th , Cambridge, MA 02142, USA Manufacturer Name: Boston Life Labs LLC.(Shenzhen) Address: 2107S, Building C, Tiley Plaza(II), Nanshan Central District, Shenzhen, 518067,China Product Description: Wrist Blood Pressure Brand Name: Boston Life Labs Model Name: BPW 2.4 Model Difference N/A FCC ID YTK-BPW24 Report Number: AGC10091012SZ08F1 Date of Test: Dec. 24, 2010 to Dec.30, 2010 WE HEREBY CERTIFY THAT: The above equipment was tested by Shenzhen Attestation of Global Compliance Science & Technology Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2003) and the energy emitted by the sample EUT tested as described in this report is in compliance with radiated emission limits of FCC Rules Part 15.247. Checked By: Jekey Zhang Dec.30, 2010 Authorized By King Zhang Dec.30, 2010 Report No.: AGC10091012SZ08F1 Page 2 of 87 TABLE OF CONTENTS 1. GENERAL INFORMATION............................................................................................................ 4 1.1 PRODUCT DESCRIPTION........................................................................................................................ 4 1.2 TABLE OF CARRIER FREQUENCYS..................................................................................................... 4 1.3 RECEIVER INPUT BANDWIDTH AND BEHAVIOUR FOR REPEATED SINGLE OR MULTIPLE PACKETS............................................................................................................................................................. 4 1.4 EXAMPLE OF A HOPPING SEQUENCY IN DATA MODE................................................................... 5 1.5 EQUALLY AVERAGE USE OF FREQUENCIES AND BEHAVIOUR................................................... 5 1.6 RELATED SUBMITTAL(S) / GRANT (S)................................................................................................... 6 1.7 TEST METHODOLOGY...............................................................................................................................6 1.8 TEST FACILITY............................................................................................................................................. 6 1.9 SPECIAL ACCESSORIES........................................................................................................................... 6 2. SYSTEM TEST CONFIGURATION............................................................................................... 7 2.1 CONFIGURATION OF TESTED SYSTEM ......................................................................................7 2.2 EQUIPMENT USED IN TESTED SYSTEM .....................................................................................7 3. SUMMARY OF TEST RESULTS................................................................................................... 8 4. DESCRIPTION OF TEST MODES................................................................................................ 8 5. CONDUCTION EMISSIONS(N/A)................................................................................................. 9 5.1 MEASUREMENT PROCEDURE: ....................................................................................................9 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ...........................................................9 5.3 MEASUREMENT EQUIPMENT USED: ..........................................................................................9 5.4 LIMITS AND MEASUREMENT RESULT: .....................................................................................10 6. MAXIMUM OUTPUT POWER...................................................................................................... 11 6.1 MEASUREMENT PROCEDURE: ..................................................................................................11 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .........................................................11 6.3 MEASUREMENT EQUIPMENT USED: ........................................................................................14 6.4 LIMITS AND MEASUREMENT RESULT: .....................................................................................15 7. 20 DB BANDWIDTH...................................................................................................................... 24 7.1 MEASUREMENT PROCEDURE ...................................................................................................24 7.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .........................................................24 7.3 MEASUREMENT EQUIPMENT USED: ........................................................................................24 7.4 LIMITS AND MEASUREMENT RESULTS: ...................................................................................24 8. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY (N/A)........................ 34 8.1 MEASUREMENT PROCEDURE: ..................................................................................................34 8.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .........................................................34 Report No.: AGC10091012SZ08F1 Page 3 of 87 8.3 MEASUREMENT EQUIPMENT USED: ...........................................................…

Text truncated - open the document above for the full version.

PHOTOGRAPHS OF THE TEST SETUP RADIATED EMISSION TEST SETUP