YUZ-510-2016-0001MicroConsole

PRODUCT INFORMATION GUIDE for the MicroConsole™ TV Adapter and Wireless Gamepad Controller Read all safety information in this guide before using the MicroConsole TV Adapter and Controller. Failure to read, understand and follow all safety information can result in death, serious injury or damage to the product. ol_PIG_101022_01.indd 110/22/10 5:41 PM ol_PIG_101022_01.indd 210/22/10 5:41 PM Safety Information 5 Choking Hazard 5 Proper Placement of the MicroConsole 5 Avoid Moisture Contact 6 Handling the MicroConsole and Controller 6 Repetitive Motion and Musculoskeletal Disorders 6 Photosensitive Seizures, Eyestrain and Blackouts 7 Power Adapter Use 7 Battery Use and Disposal 8 Modification or Repair 9 FCC Compliance Statement 9 Limited Hardware Warranties 10 One-Year Limited Warranty 10 90-Day Limited Warranty 11 Exclusions from Limited Warranties 12 Service and Support 13 License 14 Governing Law and Jurisdiction 14 3 ol_PIG_101022_01.indd 310/22/10 5:41 PM Product Information Guide This Product Information Guide (the “Guide”) is published by OnLive, Inc. (“OnLive” or “ONLIVE”). This Guide contains safety, handling, regulatory and warranty information as applicable, for the MicroConsole™ TV Adapter (“MicroConsole”) and wireless Gamepad Controller (“Controller”), and other items supplied by OnLive (which may include one or more of the Power Adapter, HDMI cable, USB cable and Ethernet cable, which will be referred to collectively for purposes of this Guide as “Cables”) and alkaline batteries (two AA batteries) (“Batteries”) or items that are shipped separately (which may include a Rechargeable Battery, or a Component Video Adapter and RCA Audio Cable, (the “Component Cables”). For purposes of this Guide, the term Batteries includes the Rechargeable Battery as well as the alkaline batteries except where these items are referred to separately in the Guide. The MicroConsole is for use only with the OnLive Game Service (http://www.onlive.com) (“the OnLive Game Service”). You must expressly agree to OnLive’s Terms of Service (http://www.onlive. com/legal/termsofservice) in order to use the MicroConsole and Controller in conjunction with the OnLive Game Service. Such Terms of Service will be presented to you when you create your Account for the OnLive Game Service. Resources Find comprehensive support information including FAQs at http://onlive.com/microconsole. Available 24/7, this online resource contains advice on setup, use and troubleshooting for common issues. 4 ol_PIG_101022_01.indd 410/22/10 5:41 PM 5 SAFETY INFORMATION Read all safety information in this Guide before using the MicroConsole or the Controller. Failure to read, understand and follow all safety information can result in death, serious injury or damage to the product. CHOKING HAZARD Keep the MicroConsole, Controller, Cables, Component Cables, and Batteries away from small children, as they contain small parts that can present a choking hazard. Failure to do so may result in death or serious injury. PROPER PLACEMENT OF THE MICROCONSOLE Surface of the MicroConsole may become hot. Avoid skin contact to prevent burns. The MicroConsole should be operated in an area where the temperature is below 40°C (104°F). Operation above this temperature range may shorten the life of the MicroConsole. Violating the following requirements may make the MicroConsole hot to touch, causing risk of minor or moderate injury. Do not touch, and do not permit children to touch the MicroConsole while in operation or while the MicroConsole remains hot after operation. • Place your MicroConsole in an area that has good ventilation so that heat can be dissipated. • Do not place your MicroConsole in a closed cabinet. • Do not place your Micro Console on top of heat sources (for example, stereo equipment). • Do not place your MicroConsole adjacent to, under or on top of flammable material. ol_PIG_101022_01.indd 510/22/10 5:41 PM AVOID MOISTURE CONTACT Do not use or place the MicroConsole, Controller, Cables, Component Cables, or Batteries where it will come in contact with moisture. Failure to do so may result in death or serious injury. Moisture can short the internal electronics and permanently damage the MicroConsole, Controller, Cables, Component Cables, and Batteries, and result in serious injury or death from shock or fire. If such an accident does occur, turn off the device(s), unplug all Cables and Component Cables, as applicable, immediately before cleaning. Permit the item(s) to dry thoroughly prior to turning on any item again or plugging it in. Do not use an external heat source such as a microwave oven or dryer to attempt to dry the item. Note that damage due to contact with moisture is not covered under the Limited Warranties. HANDLING THE MICROCONSOLE AND CONTROLLER Not for use by children age 12 and under. Do not drop, throw, disassemble, crush, bend, puncture, microwave, incinerate or paint the MicroConsole, Controller, Cables, Component Cables, Batteries or Rechargeable Battery. REPETITIVE MOTION AND MUSCULOSKELETAL DISORDERS Excessive repetitive use of game controllers, mice, keyboards or other input devices have been reported to be associated with serious chronic injuries. When you perform repetitive activities like game playing you may occasionally experience stiffness or minor pain in your arms, hands, neck, shoulders or other parts of your body. If you experience such symptoms you should: • Take frequent breaks. • Position yourself comfortably and not in awkward, tense postures. • Keep your hands, fingers and other body parts relaxed. 6 SAFETY INFORMATION ol_PIG_101022_01.indd 610/22/10 5:41 PM 7 If pain, discomfort, numbness, tingling or burning persist or reoccur, DO NOT IGNORE THESE SYMPTOMS. Promptly discontinue use of the Controller and consult a physician. PHOTOSENSITIVE SEIZURES, EYESTRAIN AND BLACKOUTS A small percentage of people may be susceptible to seizures or blackouts when exposed to flashing lights or other repetitive …

Text truncated - open the document above for the full version.

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: 14 October 2010 Subject: Request for Confidentiality FCC ID: YUZ-510-2016-0001 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 2010/12/30. External Photos Internal Photos User Manual Test set up photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

D E S I G N E D I N A M E R I C A . M A D E I N C H I N A . PAT E N T S , PAT E N T S P E N D I N G . FCC ID: YUZ-510-2016-0001 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. C N 1 2 1 0 1 5 0 0 0 0 0 1 0 0 2 2 0 A F 0 0 6 C B 5 1 0 - 2 0 1 6 - 0 0 0 1 5 1 0 - 2 0 1 6 - 0 0 0 1 SURFACE MAY BE HOT. AVOID SKIN CONTACT TO PREVENT BURNS. CAUTION OCTOBER 19 2010 attorney client privileged/attorney work product.

Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10

Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch 香港商立 香港商立德國際商品試驗有限公司 桃園分公司 No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan 台北縣林口鄉嘉寶村14鄰47號 http://www.adt.com.tw/ E-mail: [email protected] TEL: 886-2-26052180 FAX: 886-2-26051924 服務項目 EMC/ SAFETY/ RADIO CERTIFICATION、ID/ MECH. DESIGN、GRAPHICS/TECH. WRITING SERVICES 您產品開發的最佳伙伴 YOUR BEST PARTNER IN PRODUCT DEVELOPMENT 誠信確實‧專業第一‧顧客至上 INTEGRITY‧PROFESSIONALISM‧CUSTOMER SATISFACTION No simultaneous SAR justification Since both radio output power and less than 60/f(GHz), so per KDB 447498 3(b) simultaneous SAR is not required because SAR to peak location separation ratio is < 0.3. Ken Liu Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

Report No: SA991013D01 1 Report Format Version 3.0.1 RF EXPOSURE REPORT (For BLUETOOTH) REPORT NO.: SA991013D01 MODEL NO.: 510-2016-0001 FCC ID: YUZ-510-2016-0001 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT : OnLive, Inc. ADDRESS : 181 Lytton Avenue Palo Alto, CA 94030 ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan Report No: SA991013D01 2 Report Format Version 3.0.1 Conclusion No Evaluation Required if power is below this threshold: F(GHz) mW Low 2.402 High 2.480 24.58 Maximum measured transmitter power: Pout (dBm) Pout (mW) Conducted Power 1.9 1.5 EIRP Power 3.6 2.3 *Note: The antenna is IFA antenna with 1.72dBi gain Threshold for no SAR evaluation is 24.58mW Transmitter power is 2.3mW Conclusion: No SAR evaluation required since Transmitter Pout is below FCC threshold ---END---

Report No: SA991013D01-1 1 Report Format Version 3.0.1 RF EXPOSURE REPORT (For ZIGBEE) REPORT NO.: SA991013D01-1 MODEL NO.: 510-2016-0001 FCC ID: YUZ-510-2016-0001 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT : OnLive, Inc. ADDRESS : 181 Lytton Avenue Palo Alto, CA 94030 ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan Report No: SA991013D01-1 2 Report Format Version 3.0.1 Conclusion No Evaluation Required if power is below this threshold: F(GHz) mW Low 2.405 High 2.480 24.59 Maximum measured transmitter power: Pout (dBm) Pout (mW) Conducted Power 0.3 1.1 EIRP Power 2.6 1.8 *Note: The antenna is IFA antenna with 2.31dBi gain Threshold for no SAR evaluation is 24.59mW Transmitter power is 1.8mW Conclusion: No SAR evaluation required since Transmitter Pout is below FCC threshold ---END---

Report No.: RF991013D01 1 Report Format Version 3.0.1 FCC TEST REPORT (For BLUETOOTH) REPORT NO.: RF991013D01 MODEL NO.: 510-2016-0001 FCC ID: YUZ-510-2016-0001 RECEIVED: Oct.13, 2010 TESTED: Oct. 14 ~ 19, 2010 ISSUED: Oct. 22, 2010 APPLICANT: OnLive, Inc. ADDRESS: 181 Lytton Avenue Palo Alto, CA 94030 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan This test report consists of 50 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF991013D01 2 Report Format Version 3.0.1 TABLE OF CONTENTS 1. CERTIFICATION.............................................................................................4 2. SUMMARY OF TEST RESULTS.....................................................................5 2.1 MEASUREMENT UNCERTAINTY..................................................................6 3. GENERAL INFORMATION.............................................................................7 3.1 GENERAL DESCRIPTION OF EUT................................................................7 3.2 DESCRIPTION OF TEST MODES..................................................................8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST.............................................8 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL..................9 3.2.3 GENERAL DESCRIPTION OF APPLIED STANDARDS...............................11 3.2.4 DESCRIPTION OF SUPPORT UNITS..........................................................11 4. TEST TYPES AND RESULTS.......................................................................12 4.1 CONDUCTED EMISSION MEASUREMENT................................................12 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT..............................12 4.1.2 TEST INSTRUMENTS..................................................................................13 4.1.3 TEST PROCEDURES...................................................................................14 4.1.4 DEVIATION FROM TEST STANDARD.........................................................14 4.1.5 TEST SETUP................................................................................................14 4.1.6 EUT OPERATING CONDITIONS..................................................................15 4.1.7 TEST RESULTS............................................................................................16 4.2 RADIATED EMISSION MEASUREMENT.....................................................18 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...................................18 4.2.2 TEST INSTRUMENTS..................................................................................19 4.2.3 TEST PROCEDURES...................................................................................20 4.2.4 DEVIATION FROM TEST STANDARD.........................................................20 4.2.5 TEST SETUP................................................................................................21 4.2.6 EUT OPERATING CONDITIONS..................................................................21 4.2.7 TEST RESULTS............................................................................................22 4.3 NUMBER OF HOPPING FREQUENCY USED.............................................27 4.3.1 LIMIT OF HOPPING FREQUENCY USED...................................................27 4.3.2 TEST INSTRUMENTS....................................................................................27 4.3.3 TEST PROCEDURES...................................................................................27 4.3.4 DEVIATION FROM TEST STANDARD.........................................................28 4.3.5 TEST SETUP................................................................................................28 4.3.6 TEST RESULTS............................................................................................28 4.4 DWELL TIME ON EACH CHANNEL.............................................................30 4.4.1 LIMIT OF DWELL TIME USED......................................................................30 4.4.2 TEST INSTRUMENTS..................................................................................30 4.4.3 TEST PROCEDURES...................................................................................30 4.4.4 DEVIATION FROM TEST STANDARD.........................................................30 4.4.5 TEST SETUP................................................................................................31 4.4.6 TEST RESULTS............................................................................................31 4.5 CHANNEL BANDWIDTH...............................................................................35 4.5.1 LIMITS OF CHANNEL BANDWIDTH............................................................35 4.5.2 TEST INSTRUMENTS..................................................................................35 4.5.3 TEST PROCEDURE.....................................................................................35 Report No.: RF991013D01 3 Report Format Version 3.0.1 4.5.4 DEVIATION FROM TEST STANDARD.........................................................36 4.5.5 TEST SETUP................................................................................................36 4.5.6 EUT OPERATING CONDITION....................................................................36 4.5.7 TEST RESULTS............................................................................................37 4.6 HOPPING CHANNEL SEPARATION............................................................38 4.6.1 …

Text truncated - open the document above for the full version.

Report No.: RF991013D01-1 1 Report Format Version 3.0.1 FCC TEST REPORT (For ZIGBEE) REPORT NO.: RF991013D01-1 MODEL NO.: 510-2016-0001 FCC ID: YUZ-510-2016-0001 RECEIVED: Oct. 13, 2010 TESTED: Oct. 14 ~ 22, 2010 ISSUED: Oct. 22, 2010 APPLICANT: OnLive, Inc. ADDRESS: 181 Lytton Avenue Palo Alto, CA 94030 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan This test report consists of 47 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF991013D01-1 2 Report Format Version 3.0.1 TABLE OF CONTENTS 1. CERTIFICATION..........................................................................................4 2. SUMMARY OF TEST RESULTS.................................................................5 2.1 MEASUREMENT UNCERTAINTY...............................................................5 3. GENERAL INFORMATION..........................................................................6 3.1 GENERAL DESCRIPTION OF EUT............................................................6 3.2 DESCRIPTION OF TEST MODES..............................................................7 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST..........................................7 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL...............8 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS............................10 3.4 DESCRIPTION OF SUPPORT UNITS.......................................................10 4. TEST TYPES AND RESULTS....................................................................11 4.1 CONDUCTED EMISSION MEASUREMENT.............................................11 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT..........................11 4.1.2 TEST INSTRUMENTS...............................................................................12 4.1.3 TEST PROCEDURES...............................................................................13 4.1.4 DEVIATION FROM TEST STANDARD......................................................13 4.1.5 TEST SETUP.............................................................................................13 4.1.6 EUT OPERATING CONDITIONS...............................................................14 4.1.7 TEST RESULTS........................................................................................15 4.2 RADIATED EMISSION MEASUREMENT..................................................17 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...............................17 4.2.2 TEST INSTRUMENTS...............................................................................18 4.2.3 TEST PROCEDURES...............................................................................19 4.2.4 DEVIATION FROM TEST STANDARD......................................................19 4.2.5 TEST SETUP.............................................................................................20 4.2.6 EUT OPERATING CONDITIONS...............................................................20 4.2.7 TEST RESULTS........................................................................................21 4.3 6dB BANDWIDTH MEASUREMENT.........................................................29 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT.......................................29 4.3.2 TEST INSTRUMENTS...............................................................................29 4.3.3 TEST PROCEDURE..................................................................................29 4.3.4 DEVIATION FROM TEST STANDARD......................................................29 4.3.5 TEST SETUP.............................................................................................30 4.3.6 EUT OPERATING CONDITIONS...............................................................30 4.3.7 TEST RESULTS........................................................................................31 4.4 MAXIMUM OUTPUT POWER...................................................................32 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT....................32 4.4.2 INSTRUMENTS.........................................................................................32 4.4.3 TEST PROCEDURES...............................................................................32 4.4.4 DEVIATION FROM TEST STANDARD......................................................32 4.4.5 TEST SETUP.............................................................................................33 4.4.6 EUT OPERATING CONDITIONS...............................................................33 4.4.7 TEST RESULTS........................................................................................34 4.5 POWER SPECTRAL DENSITY MEASUREMENT....................................35 Report No.: RF991013D01-1 3 Report Format Version 3.0.1 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT..................35 4.5.2 TEST INSTRUMENTS...............................................................................35 4.5.3 TEST PROCEDURE..................................................................................35 4.5.4 DEVIATION FROM TEST STANDARD......................................................36 4.5.5 TEST SETUP.............................................................................................36 4.5.6 EUT OPERATING CONDITION.................................................................36 4.5.7 TEST RESULTS........................................................................................37 4.6 BAND EDGES MEASUREMENT...............................................................38 4.6.1 LIMITS OF BAND EDGES MEASUREMEN…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST