YVZ-EAP850A2.4GHz WIRELESS SPEAKER USB Transmitter

DOCKING DIGITAL MUSIC SYSTEM WITH WIRELESS SPEAKERS FOR iPod AND iPhone USER’S MANUAL EAP-850 (iPod/iPhone Not Included) DEAR JENSEN® CUSTOMER PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. 1 IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Read these instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Keep these instructions – The safety and operating instructions should be kept for future reference. 3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions – All operation and use instructions should be followed. 5. Do not use this apparatus near water – The appliance should not be used near water; for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 6. Clean only with dry cloth – The appliance should be cleaned only as recommended by the manufacturer. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. The system has as AC plug and will only fit into matching AC outlets. This is a safety feature to reduce the possibility of electric shock. If the plug will not fit in your AC outlets, you should have the outlet changed by qualified licensed electrician. Do not use an adaptor to make the plug fit into your outlet. This defeats the safety feature and could expose you to electric shock. 11. Only use attachments / accessories specified by the manufacturer. 12. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. 15. Power Sources – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Do not overload wall outlet. 16. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 17. There is a high energy rechargeable battery inside the speaker box, do not throw it into fire to avoid danger of explosion. 18. Do not charge the internal rechargeable battery longer than specified to prevent danger of fire. Overcharging rechargeable batteries may shorten their 2 life span. 19. Do not attempt to dismantle, open or repair this product yourself. If a fault occurs, seek advice from your local qualified service technician or contact the distributor via the telephone number at the back of this instruction manual. 20. Caution marking and nameplate are located on bottom of product. IMPORTANT NOTES Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. • Places subject to constant vibration. Dusty, humid or moist places. PRODUCT FEATURES This iPod/iPhone Docking Music System with incorporates the following features: z Play and Charge your iPod nano, iPod touch, iPod classic, iPod video and iPhone. z 2.4GHz Wireless speakers z Up to 30 meters operating range z Play music from your computer z Wireless charging for the speakers built-in batteries z Auxiliary input jack z Digital volume control z Remote Control 3 LOCATION OF CONTROLS DOCKING BASE & SPEAKERS 1. Left Satellite Speaker 2. Right Satellite Speaker 3. Speaker Status Indicator 4. Docking Base 5. Remote Infrared Sensor 6. Volume Down (-) Button 7. iPod/iPhone Docking Connector 8. Volume Up (+) Button 9. Speaker Volume Up (+) Button 10. Speaker Volume Down (-) Button 11. Battery Charging Indicator for Left Speaker 12. Battery Charging Indicator for Right Speaker 13. Docking Base Power Indicator 4 14. Docking Base Power On/Standby Button 15. Speaker Power Switch 16. Speaker Link Button 17. Speaker Channel Selector 18. USB Transmitter Port 19. AUX IN Jack 20. DC IN Jack REMOTE CONTROL 1. Infrared Transmitter 2. Power ON/Standby Button; iPod/iPhone Menu Enter Button 3. iPod/iPhone Menu Scroll Up  Button 4. iPod/iPhone Skip Backward button 5. iPod /iPhone Menu Scroll Down  button 6. Volume+ Button 7. Volume- Button 8. iPod/iPhone Skip Forward button 9. iPod/iPhone Play/Pause Button; Menu Button 10. Battery Compartment 5 USB TRANSMITTER 1. USB connector 2. Indicator of transmitter 3. Transmitter Link button LED INDICATIONS LED Position Discription LED Status No Power LED Off Power on Solid Blue Power Indicator (Docking Base) Standby Solid Red N…

Text truncated - open the document above for the full version.

E-CORE AUDIO LIMITED Date: 2010-10-18 Subject: Authorization for adding family models To whom it may concern, Statement Product is: 2.4GHZ WIRLESS SPEAKER FCC ID: YVZ-EAP850A Basic model is: EAP-850 Additional models are: SR-15i, ID4120 We hereby confirm that these models are identical in construct, layout, and schematics. The difference only exist in the models names for the marketing requirement. Yours sincerely, Signature: Company Name: E-CORE AUDIO LIMITED

DATE : Oct, 18, 2010 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:_YVZ-EAP850A___________ Product Name:__ 2.4GHZ WIRLESS SPEAKER _________ Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operational Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. By: Zhang Baker Signature Printed Title: Sales On behalf of : E-CORE AUDIO LIMITED

FCC ID Label Location

E-CORE AUDIO LIMITED FCC ID：YVZ—EAP850A Model No: EAP-850 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions(1) This device may not cause harmful interference,and(2)this device must accept any interference received, Including interference that may cause undesired operation

ISO/IEC17025Accredited Lab. Report No: FCC 1009298 File reference No: 2010-10-18 Applicant: E-CORE AUDIO LIMITED Product: 2.4GHZ WIRLESS SPEAKER Model No: EAP-850 Trademark: N/A Test Standards: FCC Part 15 Subpart C, Paragraph 15.247 Test result: It is herewith confirmed and found to comply with the requirements set up by ANSI C63.4&FCC Part 15 Subpart C, Paragraph 15.247 regulations for the evaluation of electromagnetic compatibility Approved By Jack Chung Manager Dated: October 16, 2010 Results appearing herein relate only to the sample tested The technical reports is issued errors and omissions exempt and is subject to withdrawal at SHENZHEN TIMEWAY TECHNOLOGY CONSULTING CO LTD 5/F,Block 4, Anhua Industrial Zone.,No.8 TaiRan Rd.CheGongMiao,FuTian District, Shenzhen,CHINA. Tel (755) 83448688 Fax (755) 83442996 Report No: 1009298 Page 2 of 38 Date: 2010-10-18 TEST REPORT The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the Shenzhen Timeway Technology Consulting Co .,Ltd. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the Shenzhen Timeway Technology Consulting co .,Ltd to his customer. Supplier or others persons directly concerned. Shenzhen Timeway Technology Consulting co .,Ltd will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The Shenzhen Timeway Technology Consulting co .,Ltd reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Special Statement˖ The testing quality ability of our laboratory meet with "Quality Law of People's Republic of China" Clause 19. The testing quality system of our laboratory meets with ISO/IEC-17025 requirements, which is approved by CNAL. This approval result is accepted by MRA of APLAC. Our test facility is recognized, certified, or accredited by the following organizations: CNAL-LAB Code: L2292 The EMC Laboratory has been assessed and in compliance with CNAL/AC01:2002 accreditation criteria for testing Laboratories (identical to ISO/IEC 17025:1999 General Requirements) for the Competence of testing Laboratories. FCC-Registration No.: 899988 The EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications commission. The acceptance letter from the FCC is maintained in our files. Registration No.: 899988. IC-Registration No.: IC5205A-01 The EMC Laboratory has been registered and fully described in a report filed with the (IC) Industry Canada. The acceptance letter from the IC is maintained in our files. Registration IC No.: 5205A-01. Report No: 1009298 Page 3 of 38 Date: 2010-10-18 TEST REPORT The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the Shenzhen Timeway Technology Consulting Co .,Ltd. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the Shenzhen Timeway Technology Consulting co .,Ltd to his customer. Supplier or others persons directly concerned. Shenzhen Timeway Technology Consulting co .,Ltd will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The Shenzhen Timeway Technology Consulting co .,Ltd reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Test Report Conclusion Content 1.0 General Details ................................................................................................ 3 1.1 Test Lab Details................................................................................................ 3 1.2 Applicant Details.............................................................................................. 3 1.3 Description of EUT .......................................................................................... 3 1.4 Submitted Sample............................................................................................. 3 1.5 Test Duration.................................................................................................... 4 1.6 Test Uncertainty.................................................................................................4 1.7 Test By.......................................................................................................... 4 2.0 List of Measurement Equipment......................................................................... 4 3.0 Technical Details............................................................................................. 7 3.1 Summary of Test Results..................................................................................... 7 3.2 Test Standards.................................................................................................. 8 4.0 EUT Modification............................................................................................. 8 5.0 Power Line Conducted Emission Test...................................................................... 8 5.1 Schematics of the Test........................................................................................ 8 5.2 Test Method and Test Procedure............................................................................ 8 5.3 Configuration of the EUT.................................................................................... 8 5.4 EUT Operating Condition.........................................…

Text truncated - open the document above for the full version.

Radiated Emissions Tests Conducted Emissions Test