YZG-DDAHRIn-dash Multimedia

FCC statement This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment ,This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

I2C RESET SPI UART1 DVD Decode IC Working frequency:135M 16MFLAS H 64MSDRA M SD CARD MCU STM8S207 Working frequency :24M TFT Driver IC TW8832 POWER/MUTE/RESET/CLK GPIO INTERFACE 6.2 TFT Hastar 6.2 USB BLOCK DIAGRAM Crystal(27mHz) Antenna Antenna 2402MHz-2480MHz Crystal(27mHz) DRIVECD 5888 DISC DETECT ASP/DSPTDA7419 TUNER IC TEF6621 KB BOARD LCD FUNTION KEY (TOUCH KEY) Crystal (4mHz) Crystal(8mHz) bluetooth module 2.4G with 16M CtlC rys t a l

Shenzhen Autone-Tronic Technology Co.,Ltd. ADD: Fl4, Building 21, Changxing Technology Park, Shayi Village, Shajin Town, Baoan District, Shenzhen, China Tel: 0755-29545778 Fax: 0755-29545578 FCC Authorization Date: 2013-3-27 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Shenzhen Autone-Tronic Technology Co.,Ltd., the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Jin Ge General Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT – All View EUT – Top View EUT – Bottom View EUT – Left Side View EUT – Right Side View EUT – Front View

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT – Uncover View EUT – Front Board Top View EUT – Front Board Bottom View EUT – RF Module and Antenna View EUT – Top Cover Off View EUT –Station Board with MF Board View EUT – MF Board off View EUT –Station Board Top View EUT –Station Board Bottom View EUT – MF Board Top with Shielding View EUT – MF Board Top without Shielding View EUT – MF Board Bottom View EUT – Screen Cover off View EUT – Screen Top View EUT –Screen Bottom View EUT –Screen Board Top View EUT –Screen Board Bottom View EUT – DVD Top View EUT – DVD Bottom View EUT – DVD Uncover View EUT – DVD Driver Board Top View EUT – DVD Driver Board Bottom View

POWER FOR SYSTEM The Power circuits is consists of two major sections for system , DC-DC section and LDO section. 1)DC-DC section The section is made up of - MP4462 The MP4462 is a high frequency step-down switching regulator with an integrated internal high-side high voltage power MOSFET. It provides 3.5A output with current mode control for fast loop response and easy compensation by switching at 4MHz. It provides the main circuits of system whit a strong power. And it can be turn on/off by MCU . 2)LDO section The section is made up of - LM2954 The UTC LM2954 is a monolithic voltage regulator with low dropout voltage, and low quiescent current. It will work for MCU power and can’t turn off. MCU Circuits The section is made up of -STM8S207 The STM8S207 automotive 8-bit microcontrollers covered 128Kbytes of non volatile memory and integrated true data EEPROM. It can control DVD IC , TFT driver IC, ASP, BT model Tuner IC ,TOUCH Screen and so on by software. DVD Circuits The section is made up of - DVD decode IC - Flash - SDRAM 1) DVD decode IC Vaddis 966-H is Zoran’s ninth-generation of IC product for consumer DVD players, This device includes high level of integration to enable cost efficient solution for Car DVD . It work to decoding DVD,CD,SD card and USB for this system. And provides a video output to TFT driver ic. 2) FLASH Hynix NAND HY57V641620HG have 64Mx16 bit with spare 4Mx8 bit capacity. It work to store the software code of DVD decode IC. 3) SDRAM The SST39VF640X devices are 4X16 respectively, CMOS Multi-Purpose Flsh P;US MANUFACTURED with SST’S prorrietary, high performance CMOS SuperFlash technology. It worked for DVD decode IC to store the data. TFT DRIVER The T107B is a highly integrated All in one Visual Processor that provides major cost saving solution for the portable applications. it can manage to digit video signal from analog video, and driver the TFT. BT Module Board The BT Module Board is consists of two major sections, Digital section and Analog/RF Section 1) Digital Section The section is made up of: - BC352 - Flash Memory BC352 The BC352 integrated the Baseband/Radio and processor into a single chip it includes a 2.4Ghz BT radio, Baseband circuits and DSP Processor. Flash Memory The Flash stores the OS of the device and application code as well as the power-on configuration for the processor, the wireless radio。 2) 16 MHz Crystal The 16 MHz crystal provide the core clock for the BC352. This crystal is connected to the BC352, which then form an oscillator internally. 3) Analog/RF Section The RF Front End Section is consists of: - DBF81F106 - 2.4GHz Band Pass Filter (BPF) - Antenna -2.4G BT Antenna. DBF81F106 - 2.4GHz Band Pass Filter (BPF) The input and output of the 2.4GHz balun is directed to a band pas filter between the BC352 and the 2.4G BT Antenna. This filter is included to reduce spurious emissions from the BC352 or wireless interference. - Antenna -2.4G BT Antenna. Antenna transform the signal on the transmission transform into the electromagnetic waves in unbounded medium (usually free),and the opposite transformation.

1 E D C B A G F 09 2008-6-3 2009-01-04 NO USED REFER ZORAN DEMO SCH ADD D10-D11 R39/R42 CHANGE TO 6.8R BC15 0.1UF/0603 2 1 3 Q3 3906(SOT-23) TC19 47UF/6.3V/ R39 6R8(1%)/0603 R40 220R(1%)/0603 2 1 3 Q1 3906(SOT-23) TC20 47UF/6.3V/ R42 6R8(1%)/0603 R43 220R(1%)/0603 DISC_SW LD2 LDIODE LD1 LDIODE R34 22R/0603 R52 1K/0603 1 2 J4 SLED/LOAD C4 1UF/0603 R15 4.7K/0603 R13 91R/0603 R12 91R/0603 BC4 22PF/0603 BC7 22PF/0603 BC8 22PF/0603 BC9 22PF/0603 BC57 22PF/0603 BC58 22PF/0603 BC3 NC BC59 NC BC53 1nF/0603 BC61 1nF/0603 BC16 10NF/0603 TC21 100UF/6.3V BC17 0.1UF/0603 BC60 10NF/0603 TC22 100UF/6.3V FB13 0R 1 F- 2 F+ 3 T+ 4 T- 5 C 6 D 7 CD/DVD_SW 8 RF 9 A 10 B 11 F 12 GND-PD 13 VREF 14 VCC 15 E 16 N.C. 17 VR-CD 18 VR-DVD 19 CD-LD 20 MD 21 HFM 22 N.C. 23 DVD-LD 24 GND-LD 25 SHELL 26 SHELL J1 CON-24PIN 3 2 1 CON2 R19 nc R50 nc 21 D5 0R D7 0R D8 NC D9 NC 1 B 3 C 2 E Q2 R10 4.7K/0603 3 1 2 Q5 2N3904(SOT-23) TEST B A [4] 12CMDISC_DET [4] 8CMDISC_DET DGND DSPVCC33 DGND [2] DVDLD [4] DVD_LD [4] CD_LD [2] CDLD DGND [4] LDIODE_SW DSPVCC33 [4] IN_SW DGND [3] LOAD- [3] LOAD+ [2] CDVR [2] CD/DVD_SW [4] DVD_MD [4] CD_MD RF5V [2] DVDVR [4] CD/DVD_C [2,4] RFA [2,4] RFB [2,4] RFC [2,4] RFD [2,4] RFE [2,4] RFF DGND DGND [2] CD/DVD_SW [2,4] RFF [2,4] RFD [3] TACT+ [3] FACT- [3] FACT+ [3] TACT- DGND [4] VC [2,4] RFC [2] DVDLD MD [2] CDLD [2] CDVR DGND RF5V DGND DGND [4] RF [2,4] RFA [2,4] RFB DGND [2,4] RFE [2] DVDVR DGND [3] 8CMDISC_DET_TO_MCU [3] 12CMDISC_DET_TO_MCU DGND UnRegistered 1 E D C B A G F 09 Current Type(Default) BEMF GND 2011-11-3 2011-12-19 2011-12-19 TC12 47UF/10V/B BC18 0.1UF/0603 JUMP J9 R110 4.7K/0603 R111 4.7K/0603 R112 4.7K/0603 R113 4.7K/0603 R114 4.7K/0603 R115 4.7K/0603 1 VINFC 2 CFCERR1_TRB_1_ 3 CFCERR2_REGO2_ 4 VINSL+ 5 VINSL-_REGO1_ 6 VOSL_FWD_ 7 VNFFC_REV_ 8 VCC 9 PVCC1_LOAD-_ 10 PGND_LOAD+_ 11 VOSL-_VOSL+_ 12 VOSL+_VOSL-_ 13 VOFC- 14 VOFC+ 28 STBY 27 BIAS 26 VINTK 25 CTKERR1_TRB_2_ 24 CTKERR2_NC_ 23 VINLD 22 PREGND 21 PVCC2 20VNFTK_NC_ 19 PGND_VCC2_ 18 VOLD- 17 VOLD+ 16 VOTK- 15 VOTK+ 29 GND 30 GND1 U1 CD5888CB R23 27K BC10 1nF BC11 27nF R25 18K R120 11K BC12 27nF R121 27K BC62 1nF R122 1K 1% BC63 0.1uF R124 1K 1% R125 33K 12 R298 R 2K 12 R245 R 2K C206 0.1uF FB17 600 IND-SMT-0805 FB20 600 IND-SMT-0805 FB23 600 IND-SMT-0805 C330 1UF C0603 C10 4.7UF C0805 C334 100NF C0603 + EC14 47UF 16V ?? C12 1UF C0603 C26 4.7UF C0805 C27 100NF C0603 + EC15 47UF 16V ?? 3 IN 2 OUT 1 VSS IC1 LD1117-3V3 3 IN 2 OUT 1 VSS IC3 LD1117-1V8 C28 10UF C0805 C29 10UF C0805 FB26 600 IND-SMT-0805 + EC1 220UF 6.3V ?? 2 1 D1 DIODE 2 1 D4 DIODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 3435 SHELL 36 SHELL J3 CON-SMT-34PIN 1 2 3 4 5 6 CON3 CON-6PIN 1 DAT3 2 CMD 3 VSS1 4 VDD 5 CLK 6 VSS2 7 DAT0 8 DAT1 9 DAT2 10 DET 11 WP 12 COM_GND 13 14 COM1 SD-CARD R45 33R/0603 R62 33R/0603 R66 33R/0603 R67 33R/0603 R71 33R/0603 R72 33R/0603 BC67 1UF R74 10K/0603 BC68 100PF R75 4.7K/0603 R4 100R R7 4.7K R11 4.7K/0603 1 2 R17 R 2.2R 1 2 R20 R 2.2R 2 3 1 D204 BAT54C FB1 100R/500M R162 1K R164 1K B C E Q31 3904 R159 10K R160 10K B C E Q32 3904 R161 10K R163 10K R30 1K R31 1K B C E Q4 3904 R32 10K R33 10K B C E Q6 3904 R35 10K R51 10K 21 FB28 0R R53 0R R54 0R R63 0R R64 0R CN2 MGND VGND AGNDDGND DSPVCC33 DGND [4] FOCUS_PWM DGND [4] SLED_PWM [4] OPEN [4] CLOSE M5V [2] LOAD- [2] LOAD+ [3] SLED- [3] SLED+ [2] FACT- [2] FACT+ MGND [2] TACT- [2] TACT+ [3] SP_M- [3] SP_MOT+ M5V MGND DGND [4] SPDL_PWM DGND [4] TRACK_PWM MGND MGND DSPVCC33 [4] DRIVE_MUTE [3] SP_M- [3] SP_MOT- [4] SPDL_SENS- [4] SPDL_SENS+ DSPVCC33 AGND [5] DVD_R [5] DVD_L VGND 5V MGND DGND M5V RF5V D5V DGND DGND DGNDDGND D3V3 DGND DGNDDGND DSPVCC18 DGND DGND DGND DSPVCC33 DGND D5V [4] U/B/C_OUT [4] V/R/Y_OUT [4] G-Y_OUT [4] CVBS_OUT [4] VS [4] HS [3] TX_MCU [3] TX_DVD [4,5] RESET [4] UART0_TX [4] UART0_RX [4] USBDN [4] USBDP A5V DGND [2] 8CMDISC_DET_TO_MCU [2] 12CMDISC_DET_TO_MCU [3] SLED+ [3] SLED- [3] SP_MOT+ [3] SP_MOT- [4] HOMESW DGND DGND [4] SD-DATA2 [4] SD-DATA3 [4] SD-CMD/MS-BS [4] SD-CLK/MS-CLK [4] SD-DATA0/MS-DIO [4] SD-DATA1 DSPVCC33 DGND DGND [4] SD_DET DGND [4] IPOD_DET SD_WP DSPVCC33 DSPVCC33 [4] MCU_TX_DVD [3] TX_DVD DGNDDGND DGND DGND 5V 5V [3] TX_MCU [4] TX-DVD DGNDDGND DGND DGND [3] USBDN2 [3] USBDP2 [3] USBDP2 [3] USBDN2 DGND DGND 1 E D C B A G F 09 RESET Close to Vaddis! 22UF/1210 TC17 47UF/6.3V/ BC36 10NF/0603 BC35 10NF/0603 BC43 10NF/0603 BC42 10NF/0603 BC44 10NF/0603 BC34 10NF/0603 BC41 10NF/0603 BC40 10NF/0603 BC39 10NF/0603 BC33 10NF/0603 BC38 10NF/0603 BC37 10NF/0603 TC16 47UF/6.3V/ BC32 10NF/0603 BC31 10NF/0603 BC30 10NF/0603 BC29 10NF/0603 BC28 10NF/0603 FB11 0805/0.5A FB12 0805/0.5A BC14 10NF/0603 C3 1UF/0603 R41 10K/0603 R57 100R/0603 R27 4.7K/0603 R18 4.7K/0603 R44 4.7K/0603 C18 11PF/0603 C9 150PF/0603 R49 75R/1%/0603 R48 75R/1%/0603 R47 75R/1%/0603 R46 75R/1%/0603 C13 150PF/0603 C14 150PF/0603 C11 150PF/0603 L4 1.1UH/0805 L3 1.1UH/0805 L2 1.1UH/0805 L1 1.1UH/0805 C15 11PF/0603 C17 11PF/0603 C16 11PF/0603 C19 160pF/0603 C20 160pF/0603 C21 160pF/0603 C22 160pF/0603 TC14 22UF/16V BC27 1NF/0603 TC13 47UF/6.3V/ BC26 10NF/0603 R38 392R/1%/0603 R55 33R/0603 R2 75R/0603/1% R28 4.7K/0603 FB29 600R/0603 FB32 600R/0603 FB3 600R/0603 FB4 2K7 FB9 600R/0603 R58 100R/0603 C8 33PF/0603 C71NF/0603 C6 1NF/0603 BC23 0.1UF/0603 R37 15K4 (1%)/0603 FB16 0805/0.5A TC10 47UF/6.3V/ BC22 10NF/0603 FB15 39UH/0805 BC24 10NF/0603 FB14 39UH/0805 BC25 10NF/0603 TC3 22UF/16V/ TC15 47UF/6.3V/ BC6 10NF/0603 FB19 1.8K/0603 R135 6.19K 1% R130 82K Y101 12MHz R202 R 1K R131 30K R133 15K R59 56R/0603 C25 5pF(NC)/0603 BC20 22PF/0603 BC21 22PF/0603 208 VDDP 207 GPIO[9]/MEMDAT[9] 206 MEMDAT[1] 205 GPIO[8]/MEMDAT[8] 204 MEMDAT[0] 203 MEMRD# 202 MEMCS0# 201 MEMADD[0] 200 MEMADD[20]/GPIO[63]/MEMCS2# 199 GPIO[62]/FCU_IORD# 198 GPIO[61]/FCU_IOWR# 197 GPIO[60]/FCU_SCLK 196 GPIO[59]/FCU_CS2# 195 GPIO[58]/FCU_CS3# 194 GPIO[57]/FCU_WAIT# 193 GPIO[56]/FCU_RST 192 IGPIO[55]/FCU_IRQ 191 GNDC 190 VDDC 189 IGPIO[54]/PWMCO[5] 188 MEMCS1#/GPIO[53]/PWMCO[4] 187 …

Text truncated - open the document above for the full version.

R2DG130319001-00A Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, or any agency of the Federal Government. * This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “” (Rev.2)★ This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.247 TEST REPORT For Shenzhen Autone-Tronic Technology Co.,Ltd. Fl4, Building 21, Changxing Technology Park, Shayi Village, Shajin Town, Baoan District, Shenzhen, Guangdong, Ch ina Report Type: Original Report Product Type: In-dash multimedia Test Engineer: Leon Ch en Report Number: R2DG1 30325007-00 Report Date: 2013 -04-17 Reviewed By: Ivan Ca o RF Leader Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industrial Zone, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn FCC ID: YZG-DDAHR Model: LA-7000 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R2DG130325007-00 FCC Part 15.247 Page 2 of 62 TABLE OF CONTENTS GENERAL INFORMATION ...................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................ 4 TEST METHODOLOGY .................................................................................................................................................. 4 TEST FACILITY ............................................................................................................................................................ 5 SYSTEM TEST CONFIGURATION ......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 6 SUMMARY OF TEST RESULTS ............................................................................................................................... 7 FCC §15.247 (i) & §1.1307 (b) (2) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ............................. 8 APPLICABLE STANDARD .............................................................................................................................................. 8 FCC §15.203 - ANTENNA REQUIREMENT ............................................................................................................ 9 APPLICABLE STANDARD .............................................................................................................................................. 9 ANTENNA CONNECTOR CONSTRUCTION ...................................................................................................................... 9 FCC §15.209, §15.205 & §15.247(d) - SPURIOUS EMISSIONS ............................................................................ 10 APPLICABLE STANDARD ............................................................................................................................................ 10 MEASUREMENT UNCERTAINTY ................................................................................................................................. 10 EUT SETUP................................................................................................................................................................ 10 EMI TEST RECEIVER & SPECTRUM ANALYZER SETUP .............................................................................................. 11 TEST PROCEDURE ...................................................................................................................................................... 11 TEST EQUIPMENT LIST AND DETAILS ........................................................................................................................ 12 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 12 TEST RESULTS SUMMARY ......................................................................................................................................... 12 TEST DATA ................................................................................................................................................................ 12 FCC §15.247(a) (1) - CHANNEL SEPARATION TEST ......................................................................................... 21 APPLICABLE STANDARD ...............................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emission - Front View (Below 1 GHz) Radiated Emission - Rear View (Below 1 GHz) Radiated Emissions - Front View (Above 1 GHz) Radiated Emissions - Rear View (Above 1 GHz)