YZM-HW0302WAIWI joystick 2nd generation

Page 1 CONSTRUCTION PHOTOS OF EUT

Label Location FCC ID:YZM-HW0302W

Page 2 Page 3 Page 4

FCC ID: YZM-HW0302W Report No.: RF991116C19 Operational Description This device is a 2.4GHz wireless joystick. The transmitter of the EUT is powered by 3Vdc from re-chargeable battery. The antenna is PCB antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: RF991116C19 1 Report Format Version 3.0.1 FCC TEST REPORT REPORT NO. :RF991116C19 MODEL NO. :HW0302W FCC ID:YZM-HW0302W RECEIVED :Nov. 16, 2010 TESTED :Nov. 18 ~ Nov. 19, 2010 ISSUED :Nov. 23, 2010 APPLICANT : Aibelive Co., Ltd ADDRESS : 3F., No. 71, Jhou-zih St., Neu-hu District, Taipei City 114, Taiwan ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION : No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 23 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Report No.: RF991116C19 2 Report Format Version 3.0.1 Table of Contents 1. CERTIFICATION ...........................................................................................................3 2. SUMMARY OF TEST RESULTS ...................................................................................4 2.1 MEASUREMENT UNCERTAINTY ................................................................................4 3. GENERAL INFORMATION............................................................................................5 3.1 GENERAL DESCRIPTION OF EUT..............................................................................5 3.2 DESCRIPTION OF TEST MODES................................................................................6 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ...........................................................6 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ...............................................8 3.4 DESCRIPTION OF SUPPORT UNITS ..........................................................................8 4. TEST TYPES AND RESULTS .......................................................................................9 4.1 RADIATED EMISSION MEASUREMENT .....................................................................9 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT...................................................9 4.1.2 TEST INSTRUMENTS ................................................................................................10 4.1.3 TEST PROCEDURES ................................................................................................. 11 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................... 11 4.1.5 TEST SETUP ..............................................................................................................12 4.1.6 EUT OPERATING CONDITIONS ................................................................................12 4.1.7 TEST RESULTS ..........................................................................................................13 4.2 BAND EDGES MEASUREMENT ................................................................................18 4.2.1 LIMITS OF BAND EDGES MEASUREMENT .............................................................18 4.2.2 TEST INSTRUMENTS ................................................................................................18 4.2.3 TEST PROCEDURE ...................................................................................................18 4.2.4 DEVIATION FROM TEST STANDARD .......................................................................18 4.2.5 EUT OPERATING CONDITION ..................................................................................18 4.2.6 TEST RESULTS ..........................................................................................................19 5. PHOTOGRAPHS OF THE TEST CONFIGURATION..................................................21 6. INFORMATION ON THE TESTING LABORATORIES ................................................22 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB.........................................................................................23 Report No.: RF991116C19 3 Report Format Version 3.0.1 1. CERTIFICATION PRODUCT: AIWI joystick 2nd generation MODEL NO.: HW0302W BRAND: AIWI APPLICANT: Aibelive Co., Ltd TESTED: Nov. 18 ~ Nov. 19, 2010 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.4-2003 The above equipment (model: HW0302W) have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Nov. 23, 2010 Andrea Hsia / Specialist TECHNICAL ACCEPTANCE : , DATE :Nov. 23, 2010 Responsible for RF Long Chen / Senior Engineer APPROVED BY : , DATE :Nov. 23, 2010 Gary Chang / Assistant Manager Report No.: RF991116C19 4 Report Format Version 3.0.1 2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249) STANDARD PARAGRAPH TEST TYPE RESULTREMARK 15.207 Conducted Emission Test NA Power supply is 3Vdc from batteries. 15.209 15.249 15.249 (d) Radiated Emission Test Band Edge Measurement Limit: 50dB less than the peak value of fundamental frequency or meet radiated emission limit in section 15.209 PASS Meet the requirement of limit. Minimum passing margin is -2.2dB at 2398.00MHz. 2…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST