YZZGRP2612PV2IP Phone

In all EU member states, operation of 5150 - 5350 MHz is restricted to indoor use only. Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215 USA Voice: (617) 566-9300 Fax: (617) 249-1987 www.grandstream.com For Warranty and RMA information, please visit www.grandstream.com GRP2612 GRP2612P GRP2612W Quick Installation Guide Carrier-Grade HD IP Phones GRP2612W_UM_V0 1 Content English...............................................................................1 简体中文..........................................................................6 Español............................................................................11 Français...........................................................................16 Deutsch............................................................................21 Italiano.............................................................................26 Русскй.............................................................................31 Português....................................................................... 36 Polski............................................................................. 41 ~1~ ~2~ The GRP2612/GRP2612P/GRP2612W is not pre- configured to support or carry emergency calls to any type of hospital, law enforcement agency, medi- cal care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make addi- tional arrangements to access Emergency Services. It is Your responsibility to purchase SIP-compliant Internet telephone service, properly configure the GRP2612/GRP2612P/GRP2612W to use that ser- vice, and periodically test your configuration to con- firm that it works as You expect. If You do not do so, it is Your responsibility to purchase traditional wire- less or landline telephone services to access Emer- gency Services. GRANDSTREAM DOES NOT PROVIDE CON- NECTIONS TO EMERGENCY SERVICES VIA THE GRP2612/GRP2612P/GRP2612W. NEITHER GRANDSTREAM NOR ITS OFFICERS, EMPLOY- EES OR AFFILIATES MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS, AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELAT- ING TO YOUR INABILITY TO USE THE GRP2612/ GRP2612P/GRP2612W TO CONTACT EMERGEN- CY SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN ACCORDANCE WITH THE IMMEDIATELY PRECEDING PARAGRAPH. EN GRP2612/GRP2612P/GRP2612W is a next generation enter- prise IP Phone featuring 4 dual-color line keys (can be digitally programmed as up to 16 provisionable BLF/fast-dial keys), 2.4” (320x240) TFT color LCD, 4 programmable context-sensitive soft keys, 100M network ports, integrated PoE (GRP2612P & GRP2612W only), integrated dual-band WiFi (GRP2612W only), 3-way conference, and Electronic Hook Switch (EHS). The GRP2612/GRP2612P/GRP2612W delivers superior HD audio quality, rich and leading-edge telephony features, protection for privacy, and broad interoperability with most 3 rd party SIP devic- es and leading SIP/NGN/IMS platforms. GRP2612/GRP2612P/ GRP2612W is the perfect choice for enterprise users looking for a high quality, feature rich multi-line executive IP phone with ad- vanced functionalities and performance. PACKAGE CONTENTS: OVERVIEW: WARNING: Please DO NOT power cycle the GRP2612/GRP2612P/ GRP2612W during system boot up or firmware upgrade. You may cor- rupt firmware images and cause the unit to malfunction. 1x Phone Main Case 1x Handset 1x Phone Cord 1x Ethernet Cable 1x Phone Stand 1x 5V Power adapter (with GRP2612/GRP2612W only) 1x Quick Installation Guide 1x GPL license PRECAUTIONS: WARNING: Use only the power adapter included in the GRP2612/ GRP2612W package. Using an alternative non-qualified power adapter may possibly damage the unit. 5V ~3~ ~4~ PHONE SETUP: Installing the phone (Wall Mount *sold separately): 1. Attach the wall mount spacers to the slot for wall mount spacers on the back of the phone. 2. Attach the phone to the wall via the wall mount hole. 3. Pull out the tab from the handset cradle (See figure below). 4. Rotate the tab and plug it back into the slot with the extension up to hold the handset while the phone is mounted on the wall (See figure below). Tab with exten- sion up Handset Rest Tab with exten- sion down Slots for the wall mount spacers and phone stand To setup the GRP2612/GRP2612P/GRP2612W, follow the steps below: 1.Connect the handset and main phone case with the phone cord. 2.Connect the 5V DC output plug to the power jack on the phone; plug the pow- er adapter into an electrical outlet. If PoE switch is used in step 3 (GRP2612P/ GRP2612W only), this step could be skipped. 3.Network connection is possible via two methods which are described below. •Using Ethernet: - Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the router) using the Ethernet cable. •Using WiFi (GRP2612W only): - On LCD menu, navigate to “System→Network→WiFi settings” and enable WiFi. - Select “Scan” and GRP2612W will automatically start scanning within the range. - A list of WiFi networks will be displayed. Select the desired network, and if required, enter the correct password to connect. 4. The LCD will display provisioning or firmware upgrade information. Before con- tinuing, please wait for the date/time display to show up. 5. Using the phone embedded web server or keypad configuration menu, you can further configure the phone using either a static IP or DHCP. For installing the phone on the table with the phone stand, attach the phone stand to the bottom of the phone where there is a slot for the phone stand. (Upper half, bottom part). Installing the phone (Phone Stand) : CONNECTING THE PHONE: Wall mount Wall mount Phone Stand PHONE DESCRIPTION: Send Volume Speaker Line keys Soft keys Standard keypad Menu/OK key Navigation keys Message Waiting Indicator Message Transfer Hold Headset Mute PC Port Kensington Lock LAN Port Power Headset Port Handset Port ~5~ ~6~ 1. Ensure your phone is powe…

Text truncated - open the document above for the full version.

~17~ ~18~ Le GRP2612/GRP2612P/GRP2612W est un téléphone IP d’entreprise de nouvelle génération doté de 4 touches de ligne bicolores (pouvant être programmées numériquement comme 16 touches BLF / compostion rapide de numéros pouvant être fournies), d’un écran couleur LCD TFT de 2,4 pouces (320x240), ports réseau 100M, PoE intégré (GRP2612P/GRP2612W seule- ment), WiFi intégré (GRP2612W uniquement), conférence à 3 participants et commutateur à crochet électronique (EHS). Le GRP2612/GRP2612P/GRP2612W offre une haute qualité audio HD, des fonctions de téléphonie riches et avancées, une protec- tion de la confidentialité et une interopérabilité étendue avec la plupart des périphériques SIP tiers et des plates-formes SIP/ NGN/IMS. GRP2612/GRP2612P/GRP2612W est le choix idéal pour les utilisateurs en entreprise à la recherche d’un téléphone IP exécutif multiligne d’une haute qualité, riche en fonctionnalités, doté de fonctionnalités et de performances avancées. CONTENU DU PACK: PRESENTATION: ALERTE: Veuillez ne pas redémarrer le GRP2612/GRP2612P/GRP2612W lors du démarrage du système ou la mise à jour du firmware. Ceci peut cor- rompre l’image du firmware et causer un dysfonctionnement de l’unité. 1x Base Principale 1x Combiné 1x Câble téléphonique 1x Câble Ethernet 1x Support du téléphone 1x Adaptateur d’alimentation 5V (Avec GRP2612/ GRP2612W uniquement) 1x Guide d’installation rapide 1x Licence GPL PRECAUTIONS: ALERTE: N’utilisez que l’adaptateur d’alimentation fourni dans le pack GRP2612/GRP2612W. L’utilisation d’un autre adaptateur d’alimentation non qualifié peut endommager l’unité. 5V INSTALLATION DU TÉLÉPHONE: Installation du téléphone (Fixation murale *vendue séparé- ment): 1. Attachez le support de fixation murale à la fente située à l’arrière du téléphone. 2. Attachez le téléphone au mur via la fente de fixation murale. 3. Tirez la languette du support du combiné (Voir figure ci-dessous). 4. Pivotez la languette et rebranchez-la dans la fente en gardant son appui vers le haut pour tenir le combiné lorsque le téléphone est fixé au mur (Voir figure ci-dessous). Languette avec appui vers le haut Appui du Combiné Languette avec ap- pui vers le bas Fentes pour la fixation murale et support du téléphone Pour installer le téléphone sur la table avec le support du téléphone, attachez ce dernier à la fente placée à la base du téléphone (partie Supérieure, partie Inférieure). Installation du téléphone (Support du téléphone): Fixation Murale Fixation Murale Support du téléphone Port PC Verrou Kensington Port LAN Alimentation Port Casque Port Combiné ~19~ ~20~ Pour installer le GRP2612/GRP2612P/GRP2612W, suivez les instructions ci- dessous: 1. Connectez le combiné et le boîtier du téléphone principal avec le câble télé- phonique. 2. Connectez la fiche de sortie 5V DC à la prise d’alimentation sur le téléphone; branchez l’adaptateur dans une prise électrique. Si le commutateur PoE est utilisé dans l’étape 3, vous pouvez ignorer cette étape. 3. La connexion réseau est possible via deux méthodes: • Connexion via Ethernet: - Connectez le port LAN de votre téléphone au port RJ-45 d’un concentrateur/ commutateur ou un routeur (côté LAN du routeur) à l’aide du câble Ethernet. • Connexion via WiFi (GRP2612W uniquement): - A partir du menu LCD, accédez à “Système→Réseau→Configuration WiFi” et activez le WiFi. - Sélectionnez “Rechercher” et le GRP2612W démarrera automatiquement la recherche des réseaux WiFi disponibles. - Une liste des réseaux WiFi sera affichée. Sélectionnez le réseau souhaité et, si nécessaire, entrez le mot de passe correct pour vous connecter. 4. Le LCD va afficher les informations d’approvisionnement ou de mise à jour du firmware. Avant de continuer, veuillez patienter jusqu’à que la date/heure s’affiche. 5. En utilisant le serveur web intégré du téléphone ou le menu de la configuration du téléphone, vous pouvez le configurer en utilisant soit IP statique ou DHCP. CONNECTER LE TÉLÉPHONE: DESCRIPTION DU TÉLÉPHONE: Envoyer Volume Haut-parleur Touches Lignes Touches contextuels Clavier standard Touche Menu/OK Touches de naviguation Indicateur de mes- sage en attente Messsage Transfert Mise en attente Casque Muet 1. Vérifiez que votre téléphone est sous tension et connecté à Internet. 2. Appuyez sur la touche “Flèche Haut” et maintenez la pendant 3 secondes pour afficher l’adresse IP. 3. Saisissez l’adresse IP du téléphone dans votre navigateur PC . 4. Entrez le nom d’utilisateur et le mot de passe de l’administrateur pour accéder au menu de configuration. (Le nom d’utilisateur par défaut est «admin», tandis que le mot de passe aléatoire par défaut se trouve sur l’autocollant situé à l’arrière de l’appareil). 1. Assurez-vous que le téléphone est en mode veille. 2. Appuyez sur le bouton “MENU” pour accéder au MENU pour configurer le téléphone. 3. Sélectionnez MENU → Phone → SIP → Account, pour configurer les paramètresdu Proxy SIP, Proxy Sortant, Nom d’utilisateur SIP, Nom d’authentification SIP, mot de passe SIP. 4. Suivez les options du MENU pour configurer les fonctionnalités de base du téléphone. Par exemple: l’adresse IP si vous utilisez une adresse IP statique. Pour plus de détails, veuillez vérifier le manuel d’utilisation du GRP2612/ GRP2612P/GRP2612W. 5. Veuillez contacter votre Fournisseur d’accès Internet pour les paramètres supplémentaires qui peuvent être nécessaires pour configurer le téléphone. Configurer le GRP2612/GRP2612P/GRP2612W en utilisant le Clavier: CONFIGURATION DU TÉLÉPHONE: Configurer le GRP2612/GRP2612P/GRP2612W via le Naviga- teur Web: Veuillez télécharger le manuel d’utilisation et la FAQ pour plus de détails sur les instructions de configuration: http://www.grandstream.com/our-products ~21~ ~22~ Im GRP2612/GRP2612P/GRP2612W sind keine Notfallrufnummern voreingestellt oder vorkonfigu- riert. Das GRP2612/GRP2612P/GRP2612W tätigt keine automatischen Anrufe zu medizinischen, so- zialen oder juristischen Hilfs- oder Serviceorganisa- tionen. Die Anbindung an derarti…

Text truncated - open the document above for the full version.

~33~ ~34~ УСТАНОВКА ТЕЛЕФОНА: Установка телефона (Крепление на стену *продается отдельно): 1. Прикрепите прокладки стенного крепления к слотам стенного крепления на задней части телефона. 2. Прикрепите телефон к стене посредством отверстия стенного крепления. 3. Вытащите контакт из гнезда трубки (См. рисунок ниже). 4. Поверните контакт и вставьте его обратно в гнездо расширением вверх, когда телефон прикреплен к стене (См. рисунок ниже). Контакт с расширением вверх Трубка положена Контакт с расширением вниз Слоты для крепления на стену и подставка Для установки телефона на стол на подставке, присоедините подставку к днищу телефона в гнездо для подставки. (Верхняя половина, нижняя часть). Установка телефона (Подставка) : Крепление на стену Крепление на стену Подставка под телефон Для установки GRP2612/GRP2612P/GRP2612W, следуйте инструкциям: 1. Соедините трубку с телефоном с помощью телефонного шнура. 2. Подсоедините штекер блока питания 5В DC к гнезду телефона; подключите блок питания к сети, Если на шаге 3 (только для GRP2612P/ GRP2612W) используется PoE коммутатор, то этот шаг можно пропустить. 3. Подключение к сети возможно двумя способами описанными ниже. • C исспользованием Ethernet : - Подключите LAN-порт телефона к гнезду RJ-45 хаба/коммутатора или маршрутизатора (сторона LAN роутера) с помощью кабеля Ethernet. • C исспользованием WiFi (только для GRP2612W) : - В экранном меню, перейдите в “Система →Сеть →Настройки →WiFi” и активируйте WiFi. - Выберите “Сканировать” и GRP2612W начнет автоматическое сканирование в пределах диапазона. - Список WiFi сетей будет показан. Выберите необходимую сеть и, если необходимо, введите пароль для подключения. 4. На LCD будет выводиться информация об инициализации или обновлении встроенной программы. Перед продолжением, пожалуйста, дождитесь отображения экрана дата/время. 5. Используя встроенный веб-сервер или меню конфигурации клавиатуры, вы можете произвести дальнейшую конфигурацию телефона с помощью статического IP или DHCP. ПОДКЛЮЧЕНИЕ ТЕЛЕФОНА: ОПИСАНИЕ ТЕЛЕФОНА: Отправить Громкость Динамик Линейные клавиши Программируемые клавиши Стандартная клавиатура Клавиша Menu/ OK Навигационные клавиши Индикатор ожидания сообщения Сообщение Удержание Трубка Выключить звук Передать Порт ПК Кенсингтонский замо ́ к Порт LAN Сеть Порт гарнитуры Порт трубки ~35~ ~36~ 1. Убедитесь, что Ваш телефон включен и подключен к Интернет. 2. Для отображения IP-адреса нажмите и удерживайте кнопку “ВВЕРХ” в течение 3 секунд. 3. Введите IP-адрес Вашего телефона в браузере на Вашем ПК. 4. Введите имя пользователя и пароль администратора для входа в меню конфигурации. (Имя пользователя по умолчанию - “admin”, случайный пароль по умолчанию Вы можете найти на наклейке на задней стороне устройства.). 1. Убедитесь, что телефон не занят. 2. Нажмите кнопку MENU для доступа к МЕНЮ клавиатуры для конфигурации телефона. 3. Выберите MENU→Phone→SIP→Account для настройки параметров SIP-прокси, Исходящего прокси, Идентификатора пользователя SIP, Идентификатора авторизации SIP, и пароля SIP. 4. Воспользуйтесь опциями МЕНЮ для конфигурации основных функций телефона. Например, IP address, если Вы используете статический IP. За подробностями обращайтесь к Пользовательской Инструкции GRP2612/ GRP2612P/GRP2612W. 5. Пожалуйста, обратитесь к Вашему провайдеру Интернет-телефонии за дополнительными настройками, которые могут потребоваться для конфигурации телефона. Сконфигурируйте GRP2612/GRP2612P/GRP2612W с помощью клавиатуры: КОНФИГУРАЦИЯ ТЕЛЕФОНА: Сконфигурируйте GRP2612/GRP2612P/GRP2612W с помощью веб-браузера: Для получения более детальной информации по настройке, загрузите Руководство Пользователя и просмотрите часто задаваемые вопросы по ссылке: http://www.grandstream.com/our-products O GRP2612/GRP2612P/GRP2612W não é pré- configurado para suportar ou realizar chamadas de emergência a qualquer tipo de hospital, agência poli- cial, unidade de atendimento médico (“Serviço (s) de emergência”), ou qualquer outro tipo de serviço de emergência. Você deverá tomar providências adicio- nais para acessar serviços de emergência. É da sua responsabilidade adquirir serviço de telefonia via Inter- net compatível com o protocolo SIP, configurar correta- mente o GRP2612/GRP2612P/GRP2612W para usar esse serviço e periodicamente testar a configuração para confirmar que ele funciona como você espera. Se você não fizer isso, é da sua responsabilidade adquirir os serviços tradicionais de telefones celulares ou fixos para acessar serviços de emergência. GRANDSTREAM NÃO FORNECE CONEXÕES A SER- VIÇOS DE EMERGÊNCIA ATRAVÉS DO GRP2612/ GRP2612P/GRP2612W. NEM GRANDSTREAM, NEM OS SEUS DIRIGENTES, EMPREGADOS OU AFILI- ADOS PODEM SER RESPONSÁVEIS POR QUAL- QUER RECLAMAÇÃO, DANO OU PERDA, E VOCÊ, NESTE ATO, RENUNCIA QUAISQUER E TODAS REI- VINDICAÇÕES OU MOTIVOS DE ACÇÃO RESUL- TANTES DA OU RELATIVA À SUA INCAPACIDADE DE USAR O GRP2612/GRP2612P/GRP2612W PARA CONTATAR SERVIÇOS DE EMERGÊNCIA E POR NÃO FAZER ARRANJOS ADICIONAIS PARA ACED- ER AOS SERVIÇOS DE EMERGÊNCIA, SEGUNDO O PARÁGRAFO IMEDIATAMENTE ANTERIOR. PT ~37~ ~38~ O GRP2612/GRP2612P/GRP2612W é um telefone IP de nova ge- ração que inclui 4 teclas de linha com duas cores (que pode ser programado digitalmente para ter até 16 teclas de discagem rápi- do/BLFs), tela LCD colorida TFT de 2.4” (320x240), 4 teclas pro- gramáveis sensíveis ao contexto, portas de rede gigabit, PoE inte- grado (unicamente o GRP2612P/GRP2612W), Wi-Fi (unicamente o GRP2612W), conferência de 3 participantes e EHS. O GRP2612/ GRP2612P/GRP2612W entrega qualidade de áudio superior em HD, avançados recursos de telefonia, proteção para privacidade e uma completa interoperabilidade com os dispositivos SIP e as plata- formas SIP/NGN/IMS mais reconhecidos do mercado. O GRP2612/ GRP2612P/GRP2612W é a escolha perfeita para usuários corpora- tivos que buscam uma telefone IP executivo de alta qualidade, com avançados recursos, funcionalidades e desempenho. CONTEÚDO DA EMBALAGEM: RESUMO: ATENÇÃO: Por favor …

Text truncated - open the document above for the full version.

Authority to Act as Agent Date: June 14, 2019 Federal Communications Commission 445 12th Street SW Washington, DC 20554 Subject: Limited Agency Agreement (Grandstream Networks, Inc.) To Whom It May Concern: Shenzhen UnionTrust Quality and Technology Co., Ltd. is authorized to act on our behalf, until otherwise notified, for applications to Intertek Testing Services. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 12 months By: __________________________ Ning Wei (Signature 1 ) (Print name) Title: Manager On behalf of: Grandstream Networks, Inc. Telephone: 1-617-5669300

1(1) [Grandstream Networks, Inc.] [April 22, 2020] Attention: Application Examiner RE: Request for Confidentiality Applicant: [Grandstream Networks, Inc.] FCC ID: [YZZGRP2612PV2] To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request is hereby submitted by [Grandstream Networks, Inc.] to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Detailed Block Diagrams • Detailed Operational/Functional Description Rationale for request for confidentiality: [Grandstream Networks, Inc.] has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] If you have questions or need further information, please contact the undersigned. Sincerely, [Signature] [Ning Wei] [Manager] [Grandstream Networks, Inc.]

Declaration of difference To Whom It May Concern: We [Grandstream Networks, Inc.] Declared that the model GRP2612 is identical with the test model GRP2612P except the POE power supply function and model name. The model GRP2612 is without POE power supply function and no POE circuit components on the main board. The others circuit and the electronic construction do not change, declared by the manufacturer. Sincerely, [Signature ] Grandstream Networks, Inc.

Page 1 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT EXTERNAL PHOTOS EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612P) Page 2 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612P) Page 3 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612P) Page 4 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612P) Page 5 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612P) Page 6 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612P) Page 7 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612P) Page 8 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612P) Page 9 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612) Page 10 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612) EUT Photo (Model No.:GRP2612) Page 11 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612) EUT Photo (Model No.:GRP2612) Page 12 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612) EUT Photo (Model No.:GRP2612) Page 13 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612) EUT Photo (Model No.:GRP2612) Page 14 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612) EUT Photo (Model No.:GRP2612) Page 15 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612) EUT Photo (Model No.:GRP2612) Page 16 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612) EUT Photo (Model No.:GRP2612) Page 17 of 17FCC ID: YZZGRP2612PV2 Shenzhen UnionTru…

Text truncated - open the document above for the full version.

本变更记录日期 V1.1原始设计20200213 产品名本 V1.1 页 1/1 例 1:1 产品料 设计 制图 审 日期 日期 日期 图形识别符20200213 娟娟 褚 林娟 FCC贴纸 282-00751-00A-01 技术要求： 1. 尺寸：53*28mm，周R=1mm，C=5mm，厚0.1±0.05mm； 2. ：±0.3mm； 3. 材质：AW3209 80G铜纸，刷后过雾膜，背面带胶。要求温70°C，湿90%， 温-25°C，时间各8小时环不脱落不翘起不起； 4. 颜色：黑白； 5. 量产前需样品承认。 R1 53.00 mm 28.00 mm 5 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3(B) IC: 11964A-GRP2612P Complies with part 68.FCC Rules US: GNIIPNANGRP2612P FCC ID: YZZGRP2612PV2 Made in China Model: GRP2612P Input: 5V 0.6A 20200213 20200213

Page 1 of 9FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT INTERNAL PHOTOS EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612P) Page 2 of 9FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612P) Page 3 of 9FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612P) Page 4 of 9FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612P) Page 5 of 9FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo (Model No.:GRP2612P) EUT Photo (Model No.:GRP2612) Page 6 of 9FCC ID: YZZGRP2612PV2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.utt…

Text truncated - open the document above for the full version.