YZZGRP2614V2IP Phone

In all EU member states, operation of 5150 - 5350 MHz is restricted to indoor use only. Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215 USA Voice: (617) 566-9300 Fax: (617) 249-1987 www.grandstream.com For Warranty and RMA information, please visit www.grandstream.com GRP2614 Quick Installation Guide Carrier-Grade HD IP Phone ~1~ ~2~ The GRP2614 is not pre-configured to support or carry emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is Your responsibility to pur- chase SIP-compliant Internet telephone service, prop- erly configure the GRP2614 to use that service, and periodically test your configuration to confirm that it works as You expect. If You do not do so, it is Your re- sponsibility to purchase traditional wireless or landline telephone services to access Emergency Services. GRANDSTREAM DOES NOT PROVIDE CON- NECTIONS TO EMERGENCY SERVICES VIA THE GRP2614. NEITHER GRANDSTREAM NOR ITS OFFICERS, EMPLOYEES OR AFFILIATES MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS, AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELATING TO YOUR INABILITY TO USE THE GRP2614 TO CONTACT EMERGENCY SER- VICES, AND YOUR FAILURE TO MAKE ADDITION- AL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN ACCORDANCE WITH THE IMMEDI- ATELY PRECEDING PARAGRAPH. EN GRP2614 is a next generation enterprise IP Phone featuring 4 dual-color line keys (can be digitally programmed as up to 16 pro- visionable BLF/fast-dial keys), 2.8” (320x240) TFT color LCD, 4 programmable context-sensitive soft keys, 2.4” (320x240) addi- tional screen dedicated to up to 24 multi-purpose keys, 1000M network ports, integrated PoE, Wi-Fi and Bluetooth support, 3-way conference and Electronic Hook Switch (EHS). The GRP2614 de- livers superior HD audio quality, rich and leading-edge telephony features, protection for privacy, and broad interoperability with most 3 rd party SIP devices and leading SIP/NGN/IMS platforms. GRP2614 is the perfect choice for enterprise users looking for a high quality, feature rich multi-line executive IP phone with ad- vanced functionalities and performance. PACKAGE CONTENTS: OVERVIEW: WARNING: Please DO NOT power cycle the GRP2614 during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction. 1x Phone Main Case 1x Handset 1x Phone Cord 1x Ethernet Cable 1x Phone Stand 1x 12V Power adapter 1x Quick Installation Guide 1x GPL license PRECAUTIONS: WARNING: Use only the power adapter included in the GRP2614 pack- age. Using an alternative non-qualified power adapter may possibly damage the unit. 12V ~3~ ~4~ PHONE SETUP: Installing the phone (Wall Mount *sold separately): 1. Attach the wall mount spacers to the slot for wall mount spacers on the back of the phone. 2. Attach the phone to the wall via the wall mount hole. 3. Pull out the tab from the handset cradle (See figure below). 4. Rotate the tab and plug it back into the slot with the extension up to hold the handset while the phone is mounted on the wall (See figure below). Tab with exten- sion up Handset Rest Tab with exten- sion down Slot for the wall mount spacers and phone stand To setup the GRP2614, follow the steps below: 1. Connect the handset and main phone case with the phone cord. 2. Connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an electrical outlet. If PoE switch is used in step 3, this step could be skipped. 3. Network connection is possible via two methods which are described below: • Using Ethernet: Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the router) using the Ethernet cable. • Using WiFi: - On LCD menu, navigate to “System→Network→WiFi settings” and enable WiFi. - Select “Scan” and GRP2614 will automatically start scanning within the range. - A list of WiFi networks will be displayed. Select the desired network, and if required, enter the correct password to connect. 4. The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for the date/time display to show up. 5. Using the phone embedded web server or keypad configuration menu, you can further configure the phone using either a static IP or DHCP. For installing the phone on the table with the phone stand, attach the phone stand to the bottom of the phone where there is a slot for the phone stand. (Upper half, bottom part). Installing the phone (Phone Stand): PC Port Power Headset Port Handset Port CONNECTING THE PHONE: Wall mount Wall mount Phone Stand PHONE DESCRIPTION: Send Volume Speaker Line keys Soft keys Standard keypad Menu/OK key Navigation keys Message Waiting Indicator Message Transfer Hold Headset Mute Kensington Lock LAN Port Conference Phonebook Multi-Purpose keys Right Key Left Key ~5~ 1. Ensure your phone is powered up and connected to the Internet. 2. Press and hold the “UP” button for 3 seconds to see the IP address. 3. Type the phone’s IP address in your PC browser. 4. Enter admin’s username and password to access the configuration menu. (The factory default username is “admin” while the default random password can be found on the sticker at the back of the unit). 1. Make sure the phone is idle. 2. Press the MENU key to access the keypad MENU to configure the phone. 3. Select MENU → Phone → SIP → Account to configure settings for SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID and SIP Password. 4. Follow MENU options to configure the basic features of the phone. For ex- ample: the IP address if using a static IP. For details, please check GRP2614 User Manual. 5. Please contact your ITSP for additional settings that may be necessary to configure the phone. Configure the GRP2614 using the Keypad: PHONE CONFIGURATION: Configure the GRP2614 using a Web Browser: Refer t…

Text truncated - open the document above for the full version.

Authority to Act as Agent Date: July 09, 2020 Federal Communications Commission 445 12th Street SW Washington, DC 20554 Subject: Limited Agency Agreement (Grandstream Networks, Inc.) To Whom It May Concern: Shenzhen UnionTrust Quality and Technology Co., Ltd. is authorized to act on our behalf, until otherwise notified, for applications to Intertek Testing Services. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 12 months By: __________________________ (Signature Ning Wei 1 ) (Print name) Title: Manager On behalf of: Grandstream Networks, Inc. Telephone: 1-617-5669300

1(1) [Grandstream Networks, Inc.] [October 28,2020] Attention: Application Examiner RE: Request for Confidentiality Applicant: [Grandstream Networks, Inc.] FCC ID: [YZZGRP2614V2] To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request is hereby submitted by [Grandstream Networks, Inc.] to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Detailed Block Diagrams • Detailed Operational/Functional Description Rationale for request for confidentiality: [Grandstream Networks, Inc.] has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] If you have questions or need further information, please contact the undersigned. Sincerely, [Signature] [Ning Wei] [Manager] [Grandstream Networks, Inc.]

Page 1 of 9 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 9 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 9 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 4 of 9 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 5 of 9 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 6 of 9 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 7 of 9 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 8 of 9 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 9 of 9 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

版本号变更记录日期 V1.0原始版本20200831 技术要求： 1. 尺寸：53*28mm，四周倒角R=1mm，C=5mm，厚度0.1±0.05mm； 2. 公差：±0.3mm； 3. 材质：80G铜版纸，印刷后过雾膜，背面带胶。要求高温70°C，高湿90%， 低温-25°C，时间各8小时环境下不脱落不翘起不起泡；； 4. 颜色： Pantone Black C White 5. 量产前需样品承认。 R=1 5mm 53mm 28mm 5mm This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 产品名称版本号 V1.0 页数 1/1 比例 1:1 产品料号 设计 制图 审核 日期 日期 日期 图形识别符号20201015 20201015 20201015 宋娟娟 褚滔 林慧娟 GRP2614V2_FCC 282-00745-00A-02 GRP2614 12V 1A US: GNIIPNANGRP261X62 CAN ICES-3(B)/NMB-3(B) IC:11964A-GRP2614V2 FCC ID: YZZGRP2614V2 Made in China 211-200923 R DE200034211 V2.0 添加日规认证和HVIN:GRP2614V2 5GHz band(W52, W53): Indoor use only in Japan 20201015 HVIN:GRP2614V2

Page 1 of 6 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo BT/WIFI Antenna Page 2 of 6 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 6 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 4 of 6 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 5 of 6 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 6 of 6 FCC ID: YZZGRP2614V2 IC: 11964A-GRP2614V2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-2823088 6 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

Page 2 of 15 Report No.: 200829007RFC-5 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.0 Version Version No. Date Description V1.0 November 7, 2020 Original Page 3 of 15 Report No.: 200829007RFC-5 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.0 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 4 1.4 OTHER INFORMATION ......................................................................................................................................... 6 1.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................................................... 8 1.6 DEVIATION FROM STANDARDS ............................................................................................................................ 8 1.7 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 8 1.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 8 2. EQUIPMENT LIST .................................................................................................................................................... 8 3. MPE EVALUATION ................................................................................................................................................... 9 3.1 REFERENCE DOCUMENTS FOR EVAL U AT I O N ........................................................................................................ 9 3.2 MPE COMPLIANCE REQUIREMENT ..................................................................................................................... 9 3.2.1 LIMITS ................................................................................................................................................... 9 3.2.2 TEST PROCEDURE ............................................................................................................................... 10 3.3 MPE CALCULATION METHOD ........................................................................................................................... 10 3.4 MPE CALCULATION RESULTS .......................................................................................................................... 10 3.4.1 FOR WLAN ......................................................................................................................................... 10 3.4.2 FOR BT ............................................................................................................................................... 14 3.4.3 SIMULTANEOUS MULTI-BAND TRANSMISSION MPE ANALYSIS .................................................................. 15 APPENDIX 1 PHOTOS OF TEST SETUP ..................................................................................................................... 15 APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS ................................................................................. 15 Page 4 of 15 Report No.: 200829007RFC-5 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.0 1. GENERAL INFORMATION 1.1 CLIENT INFORMATION Applicant: Grandstream Networks,Inc. Address of Applicant: 126 Brookline Ave., 3rd Floor Boston, MA 02215, USA Manufacturer: Grandstream Networks,Inc. Address of Manufacturer: 126 Brookline Ave., 3rd Floor Boston, MA 02215, USA 1.2 EUT INFORMATION Product Name: IP Phone Model No: GRP2614 HVIN: GRP2614V2 Trade Mark: GRANDSTREAM DUT Stage: Production Unit EUT Supports Function: 2.4 GHz ISM Band: IEEE 802.11b/g/n Bluetooth V4.2 5 GHz U-NII Bands: 5 150 MHz to 5 250 MHz IEEE 802.11a/n/ac 5 250 MHz to 5 350 MHz IEEE 802.11a/n/ac 5 470 MHz to 5 725 MHz IEEE 802.11a/n/ac 5 725 MHz to 5 850 MHz IEEE 802.11a/n/ac Sample Received Date: September 8, 2020 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD For BT_LE Frequency Band: 2400 MHz to 2483.5 MHz Frequency Range: 2402 MHz to 2480 MHz Bluetooth Version: Bluetooth LE Type of Modulation: GFSK Number of Channels: 40 Channel Separation: 2 MHz Antenna Type: Dipole Antenna Antenna Gain: 3.5 dBi Maximum Peak Power: 3.12 dBm For BT_EDR Frequency Band: 2400 MHz to 2483.5 MHz Frequency Range: 2402 MHz to 2480 MHz Bluetooth Version: Bluetooth BR + EDR Modulation Technique: Frequency Hopping Spread Spectrum(FHSS) Type of Modulation: GFSK, π/4DQPSK, 8DPSK Number of Channels: 79 Channel Separation: 1 MHz Antenna Type: Dipole Antenna Antenna Gain: 3.5 dBi Maximum Peak Power: 8.469 dBm Page 5 of 15 Report No.: 200829007RFC-5 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang…

Text truncated - open the document above for the full version.

Page 2 of 35 Report No.:200829007RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.0 Version Version No. Date Description V1.0 November 7, 2020 Original Page 3 of 35 Report No.:200829007RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.0 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES .............................................................................................................. 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 5 1.4 OTHER INFORMATION ......................................................................................................................................... 5 1.5 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 5 1.6 TEST LOCATION ................................................................................................................................................. 6 1.7 TEST FACILITY ................................................................................................................................................... 6 1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 6 1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 6 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 6 1.11 MEASUREMENT UNCERTAINTY ........................................................................................................................... 7 2. TEST SUMMARY ...................................................................................................................................................... 8 3. EQUIPMENT LIST .................................................................................................................................................... 9 4. TEST CONFIGURATION ........................................................................................................................................ 10 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ...................................................................................................... 10 4.1.1 NORMAL OR EXTREME TEST CONDITIONS ............................................................................................. 10 4.1.2 RECORD OF NORMAL ENVIRONMENT..................................................................................................... 10 4.2 TEST CHANNELS ............................................................................................................................................. 10 4.3 EUT TEST STAT U S .......................................................................................................................................... 10 4.4 TEST SETUP .................................................................................................................................................... 11 4.4.1 FOR RADIATED EMISSIONS TEST SETUP ................................................................................................ 11 4.4.2 FOR CONDUCTED EMISSIONS TEST SETUP ............................................................................................ 12 4.4.3 FOR CONDUCTED RF TEST SETUP ........................................................................................................ 13 4.5 SYSTEM TEST CONFIGURATION ........................................................................................................................ 13 4.6 DUTY CYCLE ................................................................................................................................................... 14 5. RADIO TECHNICAL REQUIREMENTS SPECIFICATION .................................................................................... 15 5.1 REFERENCE DOCUMENTS FOR TESTING ............................................................................................................ 15 5.2 ANTENNA REQUIREMENT ................................................................................................................................. 15 5.3 CONDUCTED PEAK OUTPUT POWER ................................................................................................................. 16 5.4 6 DB BANDWIDTH & OCCUPIED BANDWIDTH ..................................................................................................... 17 5.5 POWER SPECTRAL DENSITY ............................................................................................................................ 19 5.6 CONDUCTED OUT OF BAND EMISSION .................…

Text truncated - open the document above for the full version.

Page 2 of 50 Report No.: 200829007RFC-3 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.0 Version Version No. Date Description V1.0 November 7, 2020 Original Page 3 of 50 Report No.: 200829007RFC-3 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.0 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES .............................................................................................................. 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 5 1.4 OTHER INFORMATION ......................................................................................................................................... 5 1.5 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 6 1.6 TEST LOCATION ................................................................................................................................................. 6 1.7 TEST FACILITY ................................................................................................................................................... 6 1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 7 1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 7 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 7 1.11 MEASUREMENT UNCERTAINTY ........................................................................................................................... 7 2. TEST SUMMARY ...................................................................................................................................................... 8 3. EQUIPMENT LIST ............................................…

Text truncated - open the document above for the full version.