YZZGWN770216-Port Unmanaged Gigabit Switch

Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215. USA Tel : +1 (617) 566 - 9300 www.grandstream.com For Certification, Warranty and RMA information, please visit: www.grandstream.com GWN7702(P) & GWN7703 16&24-Port Unmanaged Gigabit Switch AP Internet 路由器 Router Routeur Маршрутизатор / Bộ định tuyến Δρομολογητής IP Phone Access Point PC Quick Installation Guide Operating Temperature: 0 to 40 °C (32 to 104 °F) Storage Temperature: -40 to 70 °C (-40 to 158 °F) Operating Humidity: 10% to 90% Non- condensing Storage Humidity: 5% to 90% Non- condensing Ethernet Port: 10/100/1000 Mbps RJ-45 port 操作温度: 0至40°C(32至104°F) 存储温度: -40至70°C(-40至158°F) 工作湿度: 10% ~ 90%不凝结 存储湿度: 5% ~ 90%不凝结 以太网端口:10/100/1000 Mbps RJ-45 Temperatura (funcionamiento): 0 a 40 °C (32 a 104 °F) Temperatura (almacenamiento): -40 a 70 °C (-40 a 158 °F) Humedad de funcionamiento: 10% a 90% sin condensación Humedad de almacenamiento: 5% a 90 % sin condensación Puerto Ethernet: puerto RJ-45 de 10/100/1000Mbps Température (Fonctionnement): 0 à 40 °C (32 à 104 °F). Température (Stockage): -40 à 70 °C (-40 à 158 °F). Humidité (Fonctionnement): 10 % à 90 % sans condensation. Humidité (Stockage): 5 % à 90 % sans condensation. Port Ethernet: port RJ45 10/100/1000 Mbps. Рабочая температура: от 0 до 40 °C (от 32 до 104 °F) Температура хранения: от -40 до 70 °C (от -40 до 158 °F) Рабочая влажность: от 10% до 90% без конденсации Влажность хранения: от 5% до 90% без конденсации Порт Ethernet: RJ-45 10/100/1000Мбит/с Temperatura di esercizio: da 0 a 40 °C (da 32 a 104 °F) Temperatura di stoccaggio: da -40 a 70 °C (da -40 a 158 °F) Umidità di esercizio: da 10% a 90% senza condensa Umidità di stoccaggio: da 5% a 90% senza condensa Porta Ethernet: RJ-45 10/100/1000Mbps EN Nhiệt độ hoạt động: 0 đến 40 °C (32 đến 104 °F) Nhiệt độ bảo quản: -40 đến 70 °C (-40 đến 158 °F) Độ ẩm hoạt động: 10% đến 90% Không ngưng tụ Độ ẩm bảo quản: 5% đến 90% Không ngưng tụ Cổng mạng RJ-45: 10/100/1000Mbps. Επίπεδα θερμοκρασίας κατά τη λειτουργία: 0 έως 40 °C (32 έως 104 °F) Επίπεδα θερμοκρασίας κατά τη αποθήκευση: -40 έως 70 °C (-40 έως 158 °F) Επίπεδα υγρασίας κατα τη λειτουργία: 10% έως 90% Μη συμπυκνωμένη Επίπεδα υγρασίας κατα τη αποθήκευση: 5% έως 90% Μη συμπυκνωμένη Θύρα Ethernet: Θύρα RJ-45 10/100/1000Mbps Betriebstemperatur: 0°C bis 40°C Lagertemperatur: -40°C bis 70°C Luftfeuchte Betrieb: 10% bis 90% nicht- kondensierend Luftfeuchte Lagerung: 5% bis 90% nicht- kondensierend Ethernet-Port: 10/100/1000 Mbps RJ-45 port Temperatura (operação): 0 a 40 °C (32 a 104 °F) Temperatura (armazenamento): -40 a 70 °C (-40 a 158 °F) Umidade operacional: 10% a 90% Sem condensação Umidade de armazenamento: 5% a 90% sem condensação Porta Ethernet: porta RJ-45 de 10/100/1000Mbps ZH ES FR DE IT PT RU VI EL INSTALLATION Install on the Desktop Circular groove Rubber footpads 1. Place the bottom of switch on a sufficiently large and stable table. 2. Peel off the rubber protective paper of the four footpads one by one, and stick them in the corresponding circular grooves at the four corners of the bottom of the case. 3. Flip the switch over and place it smoothly on the table. Install on a 19” Standard Rack 1. Check the grounding and stability of the rack. 2. Install the two L-shaped rack-mounting in the accessories on both sides of switch, and fix them with the screws provided (KM 3*6). 3. Place the switch in a proper position in the rack and support it by the bracket. 4. Fix the L-shaped rack-mounting to the guide grooves at both ends of the rack with screws (prepared by yourself) to ensure that the switch is stable and horizontally installed on the rack. EN GWN7702(P)/GWN7703 Switch 交换机 / Commutateur Коммутатор 1x 1.2m (10A) AC Cable / 电源线 Cable de tierra AC Câble / AC Kabel Cavo CA / Cabo AC кабель переменного тока καλώδιο ρέυματος AC dây nguồn 1x Quick Installation Guide 快速安装手册 Guía de instalación Rápida Guide d’installation rapide Kurzinstallationsanleitung Guida installazione rapida Guia de Instalação Rápida Руководство по быстрой установке / Οδηγός γρήγορης εγκατάστασης hướng dẫn nhanh 2x Extended Rack Mounting Kits 加长版挂耳支架 Kits de montagem em rack estendidos Kits de montage en rack étendus Erweiterter Einbausatz zur Rack- Montage Kit di montaggio a rack estesi Kits de montagem em rack estendidos Комплекты для монтажа в стойку Βάσεις συσκευής μεγαλύτερου μεγέθους / tai gắn tủ rack 8x Screws (KM 3*6) 橡胶脚垫 / Tornillos Vis / Schrauben / Viti Parafuso / Винта Βίδες / vít 4x Rubber Footpads 橡胶脚垫 / almohadillas de goma / repose-pieds en caoutchouc Gummiunterlagen pedane in gomma almofadas de borracha резиновые подножки Στηρίγματα από καουτσούκ chân cao su 圆形凹槽 脚垫 ZH 设备安装 安装到桌面 1. 将交换机底部朝上放置于足够大且稳定的桌面上。 2. 逐个揭去4个脚垫的胶面保护纸，分别黏贴在机壳 底部四角对应的圆形凹槽中。 3. 将交换机翻转过来，平稳地放在桌面上。 安装到19英寸标准机架上 1. 检查机架的接地与稳定性。 2. 将配件中的两个L型挂耳支架分别安 装在交换机面板的两侧，并用配 件 中提供的螺丝(KM 3*6)固定。 3. 将交换机安放在机架内适当位置， 由托架支撑。 4. 用螺钉(请自备)将L型挂耳支架固定 在机架两端的导槽上，确保交换机 稳定、水平地安装在机架上。 INSTALACIÓN Instalación en Escritorio Ranura circular Almohadillas de Goma 1. Coloque la parte inferior del Switch sobre una mesa lo suficientemente grande y estable. 2. Despegue el papel protector de goma de las cuatro almohadillas, una por una, y péguelas en las ranuras circulares correspondientes en las cuatro esquinas de la parte inferior de la caja. 3. Voltee el Switch y colóquelo suavemente sobre la mesathe table Instalación en un rack estándar de 19” 1. Compruebe la puesta a tierra y la estabilidad del bastidor. 2. Instale los dos montajes en rack en forma de L incluidos a ambos lados del Switch y fíjelos con los tornillos proporcionados (KM 3*6). 3. Coloque el Switch en la posición adecuada en el bastidor y apóyelo en el soporte. 4. Fije el montaje en rack en forma de L a las ranuras de guía en ambos extremos del rack con tornillos (preparados por usted mismo) para asegurarse de que el Switch esté instalado de manera estable y horizontal en el rack ES INSTALLATION Installer sur le bureau Rainure circulaire Repose-pieds en caoutchouc …

Text truncated - open the document above for the full version.

Grandstream Networks, Inc. 2023-06-20 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: YZZGWN7702 [Grandstream Networks, Inc.] (“th e applicant ”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, ______________ Ning Wei Grandstream Networks, Inc. 2023-06-20 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: YZZGWN7702 [Grandstream Networks, Inc.] (“th e applicant ”) certifies that, as of the dat e of th e filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, ______________ Ning Wei

Attestation Statements 2023-06-20 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for FCC ID： YZZGWN7702 Grandstream Networks, Inc. , the undersigned, hereby authorize Grandstream Networks, Inc. to act as our designated U.S. agent for service of process, Grandstream Networks, Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. Grandstream Networks, Inc. accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information： Company name: Grandstream Networks, Inc. Contact Name: Ning Wei Address: 126 Brookline Ave., 3rd Floor Boston, MA 02215, USA Telephone No: +1 617-566-9300 Email: [email protected] U.S. Agent Information: Company Name: Grandstream Networks, Inc. Address: 126 Brookline Ave., 3rd Floor Boston, MA 02215, USA Contact Name: Ning Wei Telephone No: +1 617-566-9300 Email: [email protected] Applicant Signature: Applicant printed name: Ning Wei Agent Signature: (if the agent is different from the applicant) Agent printed name:

DECLARATION OF IDENTITY Hereby we: Grandstream Networks, Inc. 126 Brookline Ave., 3rd Floor Boston, MA 02215, USA Brand Name: GRANDSTREAM Name of Product: 16-Port Unmanaged Gigabit Switch Declares that: Model: GWN7702 has been configured with three types of power modules(1: GQ18-120150-OP, 2: R0099, 3: B18P1200150A);beside power module, it is identical in circuitry design, PCB layout, electrical components used and functions. No. Power module Manufacturer Input Output(V) Output(I) 1 GQ18-120150- OP DONGGUAN CITY GANG QI ELECTRONIC CO.,LTD 100-240Vac,50/60Hz +12V 1.5A 2 R0099 RISUNIC Technology (ShenZhen) Co., Ltd. 100-240Vac,50/60Hz +12V 1.5A 3 B18P1200150A Sunlight Electronic GROUP CO..LTD 100-240Vac,50/60Hz +12V 1.5A Thank you very much. Sincerely yours, 2023/06/27 Name: Ning Wei Date (yyyy/mm/dd) Title: Manager Grandstream Networks, Inc.

Grandstream Networks, Inc. (2023-06-20) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen UnionTrust Quality and Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, _______________ Signature: Name: Ning Wei Title: Manager

Grandstream Networks, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023- 06-20 Subject; Request for Confidentiality FCC ID: YZZGWN7702 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Ning Wei Title: Manager

Page 1 of 4 FCC ID: YZZGWN7702 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 4 FCC ID: YZZGWN7702 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 4 FCC ID: YZZGWN7702 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 4 of 4 FCC ID: YZZGWN7702 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo

Label Label location

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Grandstream Networks, lnc. 126 Brookline Avenue, 3rd Floor Boston, MA 02215, USA CAN ICES-003(A) / NMB-003(A) FCC ID: YZZGWN7702 Made in China Model: GWN7702 Input: 100-240V~ 50/60Hz 1.5A (XX) P/N XXX-XXXXX-XXXXXX S/N XXXXXXXXXXXXXXXX 褚 滔 周鹏云 宋娟娟 GWN7702FCC贴纸 设计人 制图人 审核人 比例 型号类型 料号 V2.0 1：1 版本 20230413 日期 1/1 页数 / 版本号变更记录日期 V1.0原始版本20230315 V2.0 ①电源输入中的频率50和60中间的横杠更新为斜杠； ② CAN ICES-003(B) / NMB-003(B) 更新为：CAN ICES-003(A) / NMB-003(A) 20230413 技术要求： 1. 尺寸：50*60mm，四周倒角R=1mm，C=5mm，厚度0.1±0.05mm； 2. 公差：±0.2mm； 3. 材质：消银龙背压花胶，表面过哑胶。粘贴在喷油铁壳上必须在高温70°C，高湿90%， 低温-25°C，时间各8小时环境下不脱落不翘起不起泡； 4. 颜色： C85 M30 Y85 K20，其他字体及LOGO全部印刷 Pantone Black 7C 5. 量产前需样品承认，所有材料需符合环保规定。 按照生产数据打印 （XX)打印W/US，没有则不大

Page 1 of 6 FCC ID: YZZGWN7702 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo _ Configuring the Build-in Power 1 EUT Photo _ Configuring the Build-in Power 2 Page 2 of 6 FCC ID: YZZGWN7702 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo _ Configuring the Build-in Power 3 EUT Photo _ Build-in Power 1 Page 3 of 6 FCC ID: YZZGWN7702 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo _ Build-in Power 1 EUT Photo _ Build-in Power 2 Page 4 of 6 FCC ID: YZZGWN7702 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo _ Build-in Power 2 EUT Photo _ Build-in Power 3 Page 5 of 6 FCC ID: YZZGWN7702 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo _ Configuring the Build-in Power 3 EUT Photo Page 6 of 6 FCC ID: YZZGWN7702 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo END

Page 1 of 33 Report No.: 2305045028EMC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-EMC-ICES003-V1.2 FCC & ISED TEST REPORT Product Name: 16-Port Unmanaged Gigabit Switch Trade Mark: GRANDSTREAM Model No. / HVIN: GWN7702 Add. Model No. / HVIN: N/A Report Number: 2305045028EMC-1 Test Standards: FCC 47 CFR Part 15 Subpart B ICES-003 Issue 7 FCC ID: YZZGWN7702 Test Result: PASS Date of Issue: June 26, 2023 Prepared for: Grandstream Networks, Inc. 126 Brookline Ave., 3rd Floor Boston, MA 02215, USA Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: Reviewed by: Dylan Zhang Henry Lu Senior Project Engineer Team Leader Approved by: Date: June 26, 2023 Kevin Liang Assistant Manager Page 2 of 33 Report No.: 2305045028EMC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-EMC-ICES003-V1.2 Version Version No. Date Description V1.0 June 26, 2023 Original Page 3 of 33 Report No.: 2305045028EMC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-EMC-ICES003-V1.2 CONTENTS 1. GENERAL INFORMATION ................................................................................................................................. 4 1.1 CLIENT INFORMATION .................................................................................................................................. 4 1.2 EUT INFORMATION ...................................................................................................................................... 4 1.2.1 GENERAL DESCRIPTION OF EUT ....................................................................................................... 4 1.2.2 DESCRIPTION OF ACCESSORIES ........................................................................................................ 4 1.3 DESCRIPTION OF SUPPORT UNITS ................................................................................................................. 4 1.4 TEST LOCATION .......................................................................................................................................... 5 1.5 TEST FACILITY ............................................................................................................................................ 5 1.6 DEVIATION FROM STANDARDS ...................................................................................................................... 5 1.7 ABNORMALITIES FROM STANDARD CONDITIONS ............................................................................................. 5 1.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER .................................................................................... 5 1.9 MEASUREMENT UNCERTAINTY ...................................................................................................................... 6 2. TEST SUMMARY ............................................................................................................................................... 7 3. EQUIPMENT LIST .............................................................................................................................................. 8 4. TEST CONFIGURATION .................................................................................................................................... 9 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ................................................................................................... 9 4.1.1 NORMAL OR EXTREME TEST CONDITIONS ........................................................................................... 9 4.1.2 RECORD OF NORMAL ENVIRONMENT AND TEST SAMPLE ....................................................................... 9 4.2 TEST MODES .............................................................................................................................................. 9 4.3 TEST SETUP ............................................................................................................................................. 10 4.3.1 FOR RADIATED EMISSIONS TEST SETUP ............................................................................................ 10 4.3.2 FOR CONDUCTED EMISSIONS TEST SETUP ......................................................................................... 11 4.4 SYSTEM TEST CONFIGURATION ...................................................................................................................11 5. REFERENCE DOCUMENTS FOR TESTING .....................................................................................................11 6. EMC REQUIREMENTS SPECIFICATION ......................................................................................................... 12 6.1 RADIATED EMISSION.................................................................................................................................. 12 6.2 CONDUCTED EMISSION .............................................................................................................................. 26 APPENDIX 1 PHOTOS OF TEST SETUP ............................................................................................................... 33 APPE…

Text truncated - open the document above for the full version.

Page 1 of 3 FCC ID: YZZGWN7702 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 1 PHOTOS OF TEST SETUP Radiated Emission Test Setup-1 (30 MHz~1 GHz) Page 2 of 3 FCC ID: YZZGWN7702 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com Radiated Emission Test Setup-2 (Above 1 GHz) Page 3 of 3 FCC ID: YZZGWN7702 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com Conducted Emission Test Setup-3