Z24-ATLGSM TRACKER

GSM/GPRS/GPS Tracker Prime At Lite User Manual Revision: 1.03 Document Title Prime At Lite User manual Version 1.03 Finale Date 2011-09-14 Status Released Document Control ID TRACKER Prime At Lite 1 Contents 1 Introduction....................................................................................................................................3 2 Product Overview..........................................................................................................................3 2.1 Appearance..........................................................................................................................3 2.2 Buttons/Mini USB Interface Description............................................................................3 2.3 LED Description.................................................................................................................4 2.4 External Power Interface.....................................................................................................5 2.4.1 External DC Charger Interface.................................................................................5 2.4.2 External Battery Interface........................................................................................6 3 Getting Started...............................................................................................................................7 3.1 Parts List.............................................................................................................................7 3.2 Battery Charging.................................................................................................................7 3.3 Prime At Lite Data Cable....................................................................................................8 3.4 How to insert SIM Card......................................................................................................8 3.5 Power on/Power off.............................................................................................................9 4 Trouble shooting and Safety info.................................................................................................10 4.1 Trouble shooting...............................................................................................................10 4.2 Safety info.........................................................................................................................10 2 1 Introduction Prime At Lite is a powerful GPS locator which is designed for vehicle, pets and assets tracking. With superior receiving sensitivity, fast TTFF and GSM frequencies 850/900/1800/1900. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, Prime At Lite can communicate with the backend server through GPRS/GSM network, and transfer reports of emergency, Geo-fencing, device status and scheduled GPS position etc... Service provider is easy to setup their tracking platform based on the functional wireless tracking protocol. 2 Product Overview 2.1 Appearance Figure 1-1 2.2 Buttons/Mini USB Interface Description Button /Mini USB Interface Description KEY/interface Description Power Key Power on Prime At Lite Power off Prime At Lite (If power key is enabled) 3 Function Key Geo-Fence mode Long press the key to enable/disable Geo-Fence ID0 Geo-Fence in current position mode Long press the key to enable/disable Geo-Fence ID0. If enable Geo-Fence ID0, using the current position as the centre of Geo-Fence 0. SOS mode (default) Long press the key to active SOS alarm Mini USB interface Connect a 5V DC adapter can power on Prime At Lite and charge the internal battery Connect a 3.7V Li-ion or Li-Polymer battery can power on Prime At Lite Backend server developer or administrator can use the Data_Cable_M to configure Prime At Lite Reset Key Click the key will turn off internal VBAT when OS is abnormal, and then press Power Key to restart Prime At Lite. Note: Reset key is invalid when external battery is used. 2.3 LED Description Figure 1-2 There are three LED lights in Prime At Lite device, the description as following. Light Event State GPS fixed failed Slow flash (blue) GPS LED GPS has been turned off Dark Network has been registered Slow flash (green) GSM LED Power off Dark Power on and normal Dark Fully charged Slow flash (green) Power LED In charging Slow flash (red) 4 Power key was pressed and prepare to power off Fast flash (red) Power key was pressed and prepare to power on Fast flash (green) 2.4 External Power Interface 2.4.1 External DC Charger Interface The Pin2 on Mini-USB connector is used for charging and named as VCHG pin, which can be connected to 5V DC power source to power on Prime At Lite device and charge the current battery. Figure 1-3 PIN NO. NET NAME FUNCTION PIN1 NC Not used PIN2 +5V VCHG +5V input PIN3 NC Not used PIN4 NC Not used PIN5 NC Not used PIN6 NC Not used PIN7 GND Ground PIN8 NC Not used PIN9 NC Not used PIN10 GND Ground 5 2.4.2 External Battery Interface The Pin 8 and Pin9 on Mini-USB connector are used for external battery and named as EXTBAT pin, which can be connected to 3.7V Li-ion or Li-Polymer battery to power on Prime At Lite device. The Pin6 on Mini-USB connector is used for external battery interrupt detection and named as EXT_VBAT INT, which must be connected to GND for EXT_VBAT detection. Figure 1-4 PIN NO. NET NAME FUNCTION PIN1 NC Not used PIN2 NC Not used PIN3 NC Not used PIN4 NC Not used PIN5 NC Not used PIN6 INT3_EXT_VBAT external battery interrupt detection PIN7 GND Ground PIN8 EXT_VBAT for external battery PIN9 EXT_VBAT for external battery PIN10 GND Ground 6 3 Getting Started 3.1 Parts List Name Picture Remark Prime At Lite Locater The GSM/GPRS/GPS locator. AC-DC Power Adapter It is used to charge the internal battery of Prime At Lite. Prime At Lite Data and charger Cable It the USB data cable which can be used for …

Text truncated - open the document above for the full version.

Shanghai Ulead Technology LTD. Model: AT Lite REPORT NO.: STR11098136I FCC PART 22H/24E EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 Shanghai Ulead Technology LTD. Model: AT Lite REPORT NO.: STR11098136I FCC PART 22H/24E EUT View 3

Shanghai Ulead Technology LTD. Model: AT Lite REPORT NO.: STR11098136I FCC PART 22H/24E EXHIBIT 1- PRODUCT LABELING Proposed FCC ID Label Format FCC ID: Z24-ATL Specifications : Text is Black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT FCC ID Label Location

Shanghai Ulead Technology LTD. Model: AT Lite REPORT NO.: STR11098136I FCC PART 22H/24E EXHIBIT 1- PRODUCT LABELING Proposed FCC ID Label Format FCC ID: Z24-ATL Specifications : Text is Black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT FCC ID Label Location

Shanghai Ulead Technology LTD. Model: AT Lite REPORT NO.: STR11098136I FCC PART 22H/24E EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 Solder Board-Component View 1 Shanghai Ulead Technology LTD. Model: AT Lite REPORT NO.: STR11098136I FCC PART 22H/24E Solder Board-Component View 2 Solder Board-Component View 3

Page 1 of 2 No. Prior MPN Description Packet Qty. Location 1 A AD6548BCPZ RF Tranceiver 5.0x5.0x1.0mm LFCSP-32 1 U101 2 A RPF88163B TX Module 6*7*1mm 6.0*7.0*1.0mm 1 U102 A MM8430-2600BB ECT818000001C C90-101-0004A SAWEN881MCY0F00R14B SFRM81DY102A SAWEN1G84CW0F00R14B SFRG42MY002A SAFEA1G57KE0F00B B39162B9444M410C EFCH1575TDB1A SAFEB1G57FM0F00B B39162B9417K610C EFCH1575TDA1A E3SB26.0000FBES11M 26MHZ,11.5pf,10ppm/10ppm,C0=3pf B 7M26000018 26MHZ,11pf,10ppm/10ppm,C0=5pf C XTL571100-M118-041 26MHZ,10.9pf,10ppm/10ppm,C0=1.9pf D TZ1387AA 26MHZ,11.2pf,10ppm/10ppm,C0=5pF 9 A 1XTW26000CCA 26MHZ TCXO,3.0V,+/-0.05ppm 3.2*2.5 1 U503 10 A MT6223D BB processor TFBGA 9*9 1 U200 11 A EN71PL032A0A-70CWP MCP 2 in 1(32+16),2.8V,56 ball BGA 7*9*1.2 1 U401 12 A LIS33DETR ST 3-axis ±2g/±8g LGA16 3*3*1mm 1 U403 13 A UBX-G6010-ST U-Blox GPS Chip MLF56 8*8mm 1 U501 14 A μPC8236T6N-E2 GPS LNA,NF=0.8dB,Gp=19.5dB T6N 1.5*1.5*0.4 1 U508 A X'TAL-MS3V-T1R-32.768kHz--12.5pF-30ppm 32.768kHz;+/-30ppm;12.5pF;Crystal 7215 D MS5V-T1R 32.768KHZ 12.5PF20PPM 32.768kHz;+/-20ppm;12.5pF;Crystal 4.7*1.15*1.15 A NTLJF3117PT1G WDFN6 B FDFMA2P853 MicroFET2X2 C RCRH003FB DFN2X2 D MC3117 DFN2X2 E WPM2006-6/TR DFN2X2 A FDMA1023PZ P-MOSFET,Idmax=3.7A MicroFET2x2x0.8mm B FDMA6023PZT P-MOSFET,Idmax=3.6A MicroFET2x2x0.55mm A PAS414HR-VG1B XH414H-IV01EC SCSM3R3703T01 BOM PCB Version ： V2.0 3 RF test socket 3*3*1.75 1 SA100 45 Diplexer SAW for 850&900Diplexer SAW for 1800&1900 16191718 MOSFET(Combo Diode) U105U106 8 11 11 1.8*1.35*0.5mm1.8*1.35*0.5mm U507 Backup Battery 3.3V 2 X201,X501U104U506 3.2*2.5 1 U505U201 2 U301,U302 6 SAW for GPS 1.4*1.1*0.6mm 1 7 SAW for GPS 1.4*1.1*0.5mm 1 Page 2 of 2 No. Prior MPN Description Packet Qty. Location D ML414RM-F9JE Backup Battery 3.0V 20 A 2SK3019TL Mosfet EMT3 1 Q302 A LTST-C193KRKT-5A RED LED, 630nm typ. B BL-HUB36G-AV-TRB RED LED, 627~637nm C AOT-0603RE31A-N0-N-3-M RED LED, 620~630nm A LTST-C193SBKT-5A Blue LED,465~475nM,10mA B LTST-C193TBKT-5A C BL-HB336G-TRB D AOT-0603BL31A-N0-N-3-M E WE-SP194DNB74-5A-M A LTST-C193KGKT-5A B BL-HGE36G-AV-TRB A GRM21BR60J226M 22uF,+-20%,0805,X5R,1.40mm 6.3V B C2012X5R0J226M 22uF,+-20%,0805,X5R,1.45mm 6.3V C C0805B226M007T 22uF,+-20%,0805,X5R,1.45mm 6.3V A F930J107MBAB TPSB107M006R0250C 593D107X06R3B2TD T520B107M006ATE040 100uF，ESR=40mΩ@100KHz，3.5x2.8x2.0mm，Volt Rating=6.3V，Tol=+/-20% A RL0805FR-7W0R39LB MCR10_EZH_J_LR39A VN16-080J-471B B72500T0060M060C SFI0603ML180C-LFD VRS0603MR090351N 0603 MLV, Vdc=9V,0.1J350pF@1KHz,220pF@1MHz E HL0603ML180C-LF MLV 0603 0.1J,Vbr=18V,Vdc=14V 78 A PA1575MK4G-366-21M GPS Patch Antenna 15*15*4mm 1 ANT501 79 A 5791003-991R Battery Connector 1 XJ401 A LS10N2-TB IT-1100AANP 81 A CAF98-06206-SA00-B SIM Socket, Push Push 1 XJ303 82 A KIU81010S1R 10 pin I/O port 1 XJ301 83 A Air2011-GPS-Shielding Air2011 GPS Shielded 1 H1 84 A Air2011-BB-Shielding Air2011 BB Shielded 1 H2 85 A Air2011-RF-Shielding Air2011 RF Shielded 1 H3 86 A Air2011 v2.0 Mainboard 1 2 SW301,SW303 Side Key 80 LED306 06030603 1 LED307,LED308 2 0805 60 Resistance 0.39R (1% 0805 1/4W) 572776 MLV 0603 0.1J 0603 11 RV311C162,C305 2 2558 100uF Capacitance 0805 Blue LED,465~475nMGreen LED 26 R206 3528 1 C192 0603 1 LED309

Tune up procedure Tune up procedure shall be over the power range or at specific operating power levels. 1. It must provide an operational voltage (3.4 ~ 4.2V DC) to turn on the device and on one certain channel in service mode by means of company proprietary software. 2. Base station simulator (Agilent 8960) measures the GSM device specific RF characteristics. 3. The maximum gains of each individual device are adjusted until the target value met. z For GSM 850 band： PCL = 5, PWR = 30 ‐ 33 dBm z For PCS 1900 band： PCL = 5, PWR = 27 ‐30 dBm Then these appropriate gain settings are stored in each device individually. The user has no possibility to change these settings later on, and during manufacturing each device will be individual calibrated. The measurement is done in fully calibrated setup, which is based on a Agilent 8960 base station simulator. Furthermore, the highest power level is verified afterwards in a call measurement on three channels (low, middle and high).

Report No.: 119S053R-HP-US-P03V01 Page: 1 of 86 SAR Test Report Product Name : GSM Tracker Model No. : AT Lite FCC ID : Z24-ATL Applicant : Shanghai Ulead Technology LTD. Address : Room 622, Floor 1, Merchant Market Building, No.2001 North Yanggao Road, Waigaoqiao Free Trade Zone, Shanghai, China. Date of Receipt : 27/09/2011 Date of Test : 12/10/2011 Issued Date : 13/10/2011 Report No. : 119S053R-HP-US-P03V01 Report Version : V1.1 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No.: 119S053R-HP-US-P03V01 Page: 2 of 86 Test Report Certification Issued Date: 13/10/2011 Report No.: 119S053R-HP-US-P03V01 Product Name : GSM Tracker Applicant : Shanghai Ulead Technology LTD. Address : Room 622, Floor 1, Merchant Market Building, No.2001 North Yanggao Road, Waigaoqiao Free Trade Zone, Shanghai, China. Manufacturer : Shanghai Ulead Technology LTD. Address : Room 622, Floor 1, Merchant Market Building, No.2001 North Yanggao Road, Waigaoqiao Free Trade Zone, Shanghai, China. Model No. : AT Lite FCC ID : Z24-ATL Brand Name : Prime EUT Voltage : DC 3.7V Applicable Standard : FCC Oet65 Supplement C June 2001 IEEE Std. 1528-2003,47CFR § 2.1093 Test Result : Max. SAR Measurement (1g) Body: 0.770 W/kg Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Robin Wu) Approved By : (Engineering Supervisor: Marlin Chen) Report No.: 119S053R-HP-US-P03V01 Page: 3 of 86 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No.: 119S053R-HP-US-P03V01 Page: 4 of 86 TABLE OF CONTENTS Description Page 1. General Information .................................................................................................6 1.1. EUT Description ..................................................................................................6 1.2. Test Environment.................................................................................................7 2. SAR Measurement System ......................................................................................8 2.1. DASY5 System Description.................................................................................8 2.1.1. Applications .....................................................................................................9 2.1.2. Area Scans ......................................................................................................9 2.1.3. Zoom Scan (Cube Scan Averaging) ................................................................9 2.1.4. Uncertainty of Inter-/Extrapolation and Averaging ...........................................9 2.2. DASY5 E-Field Probe........................................................................................10 2.2.1. Isotropic E-Field Probe Specification .............................................................10 2.3. Boundary Detection Unit and Probe Mounting Device...................................... 11 2.4. DATA Acquisition Electronics (DAE) and Measurement Server ........................ 11 2.5. Robot.................................................................................................................12 2.6. Light Beam Unit .................................................................................................12 2.7. Device Holder ....................................................................................................13 2.8. SAM Twin Phantom...........................................................................................13 3. Tissue Simulating Liquid .......................................................................................14 3.1. The composition of the tissue simulating liquid .................................................14 3.2. Tissue Calibration Result...................................................................................15 3.3. Tissue Dielectric Parameters for Head and Body Phantoms .............................16 4. SAR Measurement Procedure ...............................................................................17 4.1. SAR System Validation......................................................................................17 4.1.1. Validation Dipoles ..........................................................................................17 4.1.2. Validation Result ......................…

Text truncated - open the document above for the full version.

Report No.: 119S053R-HP-US-P03V01 Page: 57 of 86 Appendix D. Probe Calibration Data Report No.: 119S053R-HP-US-P03V01 Page: 58 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 59 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 60 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 61 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 62 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 63 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 64 of 86 Appendix E. Dipole Calibration Data Report No.: 119S053R-HP-US-P03V01 Page: 65 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 66 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 67 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 68 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 69 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 70 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 71 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 72 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 73 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 74 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 75 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 76 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 77 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 78 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 79 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 80 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 81 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 82 of 86 Appendix F. DAE Calibration Data Report No.: 119S053R-HP-US-P03V01 Page: 83 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 84 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 85 of 86 Report No.: 119S053R-HP-US-P03V01 Page: 86 of 86

Shanghai Ulead Technology LTD. Model: AT Lite REPORT NO.: STR11098136I-1 PAGE 1 OF 51 FCC PART 22H&24E FCC PART 22H&24E Measurement and Test Report For Shanghai Ulead Technology LTD. Room 622, Floor 1, Merchant Market Building, No.2001 North Yanggao Road, Waigaoqiao FCC ID: Z24-ATL Report Concerns: Original Report Equipment Type: GSM Tracker Model: AT Lite Report No.: STR11098136I Test Date: 2011-09-17 to 2011-10-17 Issue Date: 2011-10-20 Tested By: Silin Chen / Engineer Reviewed By: Lahm Peng / EMC Manager Approved & Authorized By: Jandy so / PSQ Manager Prepared By: SEM.Test Compliance Service Co., Ltd 3/F, Jinbao Commerce Building, Xin'an Fanshen Road, Bao'an District, Shenzhen, P.R.C.（518101） Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by SEM.Test Compliance Service Co., Ltd . Shanghai Ulead Technology LTD. Model: AT Lite REPORT NO.: STR11098136I-1 PAGE 2 OF 51 FCC PART 22H&24E TABLE OF CONTENTS 1. GENERAL INFORMATION ...................................................................................................................................3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)...............................................................................3 1.2 TEST STANDARDS...................................................................................................................................................4 1.3 TEST METHODOLOGY.............................................................................................................................................4 1.4 TEST FACILITY.......................................................................................................................................................4 1.5 EUT EXERCISE SOFTWARE....................................................................................................................................4 1.6 ACCESSORIES EQUIPMENT LIST AND DETAILS.......................................................................................................5 1.7 EUT CABLE LIST AND DETAILS.............................................................................................................................5 2. SUMMARY OF TEST RESULTS ...........................................................................................................................6 3. RF EXPOSURE .........................................................................................................................................................7 3.1 STANDARD APPLICABLE.........................................................................................................................................7 3.2 TEST RESULT..........................................................................................................................................................7 4. RF OUTPUT POWER ..............................................................................................................................................8 4.1 STANDARD APPLICABLE.........................................................................................................................................8 4.2 TEST EQUIPMENT LIST AND DETAILS.....................................................................................................................8 4.3 TEST PROCEDURE...................................................................................................................................................8 4.4 ENVIRONMENTAL CONDITIONS..............................................................................................................................9 4.5 SUMMARY OF TEST RESULTS/PLOTS......................................................................................................................9 5. EMISSION BANDWIDTH .....................................................................................................................................12 5.1 STANDARD APPLICABLE.......................................................................................................................................12 5.2 TEST EQUIPMENT LIST AND DETAILS...................................................................................................................12 5.3 TEST PROCEDURE.................................................................................................................................................12 5.4 ENVIRONMENTAL CONDITIONS............................................................................................................................12 5.5 SUMMARY OF TEST RESULTS/PLOTS....................................................................................................................13 6. OUT OF BAND EMISSION AT ANTENNA TERMINAL .................................................................................20 6.1 STANDARD APPLICABLE.......................................................................................................................................20 6.2 TEST EQUIPMENT LIST AND DETAILS...................................................................................................................20 6.3 TEST PROCEDURE.................................................................................................................................................20 6.4 ENVIRONMENTAL CONDITIONS............................................................................................................................20 6.5 SUMMARY OF TEST RESULTS/PLOTS....................................................................................................................20 7. SPURIOUS RADIATION EMISSIONS................................................................................................................37 7.1 MEASUREMENT UNCERTAINTY.....................…

Text truncated - open the document above for the full version.

Shanghai Ulead Technology LTD. Model: AT Lite REPORT NO.: STR11098136I FCC PART 22H/24E EXHIBIT 4 - TEST SETUP PHOTOGRAPHS Radio Test Suite 1 Radio Test Suite 2 Shanghai Ulead Technology LTD. Model: AT Lite REPORT NO.: STR11098136I FCC PART 22H/24E Radio Test Suite 3