Z32DMP560Digital Media Player

Please read the following in detail before using this equipment. Chapters such as “Safety Instructions” and “Important Notes” will provide important information on how to properly operate this equipment. To ensure that the user will have good operation and controlling capability of all the performances given by DMP560, the User’s Manual shall be thoroughly read and readily kept in accessible places. Safety Instructions Instructions to avoid fire, electric shock and bodily injury WARNING Remind users that the possibility of sever bodily injury can be caused by improper use of the product. CAUTION Remind users that improper use of the machine can result in possible injury or damage. Machine damage refers to the family, furniture, damage caused by pets, or influence. Please follow the instructions below at all times. WA R N I N G ●Please read the following instructions and the User’s Manual first before using this product. ●Please do not dismantle the machine or transformer. Do not make any changes to the inner structure. ●Please avoid damages to the power wires. Do not excessively bend, stamp on or put heavy weight on the power wires. Damaged power wire can result in electric shocks or sparking. Do not use damaged power wires. ●Please do not let any objects (such as combustibles, coins or needles) fall into, or any liquids (such as water, beverage) penetrate into the machine. ●Please do not repair the machine by yourself or change any components (unless specially instructed by the User’s Manual). Please completely hand over all the repair work to the agency nearest 10 Moons Timmid branch company or agents authorized by 10 Moons Timmid. ● Please do not use or place the machine at the following sites: 1. Places where the temperature differences are severe (carriage with direct sunlight, pipelines area that gives out heat, or equipments that give out heat) 2. Damp environment (such as bathrooms, washrooms) 3. Dusty environment and places ● When the following circumstances happen, please turn off the power, pull the power transformer out from the socket, and make inquiries at the nearest 10 Moons Timmid branch or agent authorized by 10 Moons Timmid. 1. Power transformer or the power wire is damaged. 2. Liquids penetrate into the machine. 3. The machine is exposed to rain fall (or becomes damp). 4. The machine can not work with sharp vibration. normally. ● Make sure that the machine remains flat and stable. Please do not put the machine in places that might shake. ● Keep children away. Adults shall watch over children until they are able to operate the machine properly according to the necessary instructions. ● Make sure that the only power supply for this machine is from the power transformer. Be sure that the actual line voltage is the same as the input voltage given on the outer covering of the power transformer. For different power transformers, the polarity and voltage may differ. Using the wrong power transformer could result in damages, mal-functions or short circuits. ● Please do not share the same socket with too many other electric appliances. Please pay special caution when using extended wire. The total power of the devices connected to the extended wire must not exceed the maximum affordability. Overloading of current shall result in wire heating and will dissolve the insulation coating of the wire. ● Avoid strong collision (avoid machine falling down). ● When using this machine overseas, please inquire the nearest 10 Moons Timmid technical service center. CAUTION ● Please put the machine and power transformer in places with good ● When inserting or pulling the plug out from the socket, make sure to hold ventilation. the plug of the power transformer. ● Please avoid getting the power wire and other conducting wires twisted. Also, please keep children away from those conducting wires. ● When the machine is not being used for a long period, please pull the power wire out from the socket and avoid dust accumulation. Dust accumulated between the power plug and socket can result in insulation fault or fire accidents. ● Please do not put heavy weight on the machine. ● When there’s a possibility of lightning striking, please pull out the power transformer. ● Please do not insert or pull out the power transformer when your hand is wet. ●Please pull out the power transformer and cables of all external equipments before any location moves. ● Please turn off the power and pull out the power transformer before any cleaning work to the machine body. Contents Chapter One Products and Accessories..........................................................1 Chapter Two Technical Specifications.............................................................1 Chapter Three Remote Control ......................................................................2 Chapter Four Installation Connection and Power‐On.....................................4 Chapter Five Main Interface Introductions ....................................................7 Chapter Six Basic Operation of Android System.............................................9 Chapter Seven Application Programs Introduction ......................................15 Chapter Eight Common Problems and Treatment........................................19 Appendix.......................................................................................................21 About this instructions........................................................................21 Statement All the information in this manual is subject to changes without any prior notifications. Our company is entitled to modify the information at any time. Please understand that there will be no further notice. Information contained in this manual is correct and reliable. No responsibilities shall be taken by our company to any users of this manual, to any damages or right of any use. Our company will not license any authority to any party. Should there be any technical problems, please E-mai…

Text truncated - open the document above for the full version.

10MOONS TECHNOLOGY DEVELOPMENT Authorization Letter Number: CF101 Version: V01 Date: 01-02-2010 We, (the approval holder) Company name 10MOONS TECHNOLOGY DEVELOPMENT CO., LTD. Addresss 6F, Bldg. A, 10moons Technology Park, No.6 Hechang Road, Zhongkai High-tech Zone, City Huizhou Country China declare that the following representative (agent): Name (person) Daniel Zhu Company name Anbotek Compliance Laboratory Limited Addresss 1/F, 1 /Build, SEC Industrial Park, No. 4 Qianhai Road, Nanshan District City Shenzhen Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description Digital Media Player Type or Model(s) DMP560 Tradename or Brand(s) N.A. We also authorize Teleconformity, Mr. M.KK oop, Rietven 3 1, 7 53 4NH Enschede, The Netherlands, to sign & apply on our behalf. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Huizhou 2011-11-24 Davis Dai Quality Dept.Manager Huizhou, China 2011-11-24 Davis Dai Quality Dept.Manager

10MOONS TECHNOLOGY DEVELOPMENT FCC Confidentiality Request Number: CF303 Version: V01 Date: 01-02-2010 To the FCC and FCC TCB handling this application for certification Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name 10MOONS TECHNOLOGY DEVELOPMENT CO., LTD. Addresss 6F, Bldg. A, 10moons Technology Park, No.6 Hechang Road, Zhongkai High-tech Zone, City Huizhou Country China request non-disclosure and confidential treatment for our certification under: Grantee Code Product Number FCC ID: Z32 DMP560 of the following materials submitted within this certification application: (please cross what is applicable, or add other documents) √ Schematics Diagrams, file: Z32DMP560_Schematic Diagram.pdf, showing components, circuuits and interconnections √ Block Diagrams, file: Z32DMP560_Block Diagram.pdf, ex plaining the functioning of the device and its buiding blocks. √ Circuit Descriptions, file: Z32DMP560_Circuit Description.pdf, ex plaining the functioning and buiding blocks. User Manual Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Huizhou, China 2011-11-24 Davis Dai Quality Dept.Manager Block Diagrams, file: Z32DMP560_Block Diagram.pdf, showing the buiding blocks of the device. Huizhou, China 2011-11-24 Davis Dai Quality Dept.Manager

The proposed Label Location on EUT Proposed FCC ID Label Location Proposed Label Location on EUT The EUT-BottomView/Proposed FCC ID Label Location

FCC ID Label Sample for FCC ID: Z32DMP560 FCC ID: Z32DMP560 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

Page 29 o f 30 FCC ID: Z32DMP560 Anbotek Compliance Laboratory Limited Report No. 201111761F Figure 5 The EUT-Inside View Figure 6 PCB of the EUT-Front View Page 30 o f 30 FCC ID: Z32DMP560 Anbotek Compliance Laboratory Limited Report No. 201111761F Figure 7 PCB of the EUT-Back View

Page 1 o f 30 FCC ID: Z32DMP560 Anbotek Compliance Laboratory Limited Report No. 201111761F FCC TEST REPORT FOR 10MOONS TECHNOLOGY DEVELOPMENT CO., LTD. Digital Media Player Model No.: DMP560 Prepared for : 10MOONS TECHNOLOGY DEVELOPMENT CO., LTD. Address : 6F, Bldg. A, 10moons Technology Park, No.6 Hechang Road, Zhongkai High-tech Zone, Huizhou, P.R.China Prepared By : Anbotek Compliance Laboratory Limited Address : 1/F, 1/Build, SEC Industrial Park, No. 4 Qianhai Road, Nanshan District, Shenzhen, 518054, China Tel: (86) 755-26014771 Fax: (86) 755-26014772 Report Number : 201111761F Date of Test : Nov. 19~23, 2011 Date of Report : Nov. 24, 2011 Page 2 o f 30 FCC ID: Z32DMP560 Anbotek Compliance Laboratory Limited Report No. 201111761F TABLE OF CONTENTS Description Page Test Report Verification 1. GENERAL INFORMATION ............................................................................................................... 4 1.1. Description of Device (EUT) ..........................................................................................................................4 1.2. Auxiliary Equipment Used during Test ..........................................................................................................5 1.3. Description of Test Facility.............................................................................................................................6 1.4. Measurement Uncertainty ...............................................................................................................................6 1.5. Test Summary .................................................................................................................................................6 2. POWER LINE CONDUCTED MEASUREMENT ............................................................................ 7 2.1. Test Equipment ...............................................................................................................................................7 2.2. Block Diagram of Test Setup ..........................................................................................................................7 2.3. Power Line Conducted Emission Measurement Limits (FCC Part 15 Subpart B Class B) ............................8 2.4. Configuration of EUT on Measurement..........................................................................................................8 2.5. Operating Condition of EUT...........................................................................................................................8 2.6. Test Procedure.................................................................................................................................................8 2.7. Power Line Conducted Emission Measurement Results.................................................................................8 3. RADIATED EMISSION MEASUREMENT..................................................................................... 15 3.1. Test Equipment .............................................................................................................................................15 3.2. Block Diagram of Test Setup ........................................................................................................................15 3.3. Radiated Emission Limit (Subpart B Class B) ..............................................................................................16 3.4. EUT Configuration on Measurement ............................................................................................................16 3.5. Operating Condition of EUT.........................................................................................................................16 3.6. Test Procedure...............................................................................................................................................16 3.7. Radiated Emission Measurement Results .....................................................................................................17 4. PHOTOGRAPH ................................................................................................................................... 24 4.1. Photo of Power Line Conducted Emission Test............................................................................................24 4.2. Photo of Radiated Emission Test ..................................................................................................................25 APPENDIX I (Photos of EUT) (3 Pages) Page 3 o f 30 FCC ID: Z32DMP560 Anbotek Compliance Laboratory Limited Report No. 201111761F TEST REPORT VERIFICATION Applicant : 10MOONS TECHNOLOGY DEVELOPMENT CO., LTD. Manufacturer : 10MOONS TECHNOLOGY DEVELOPMENT CO., LTD. EUT : Digital Media Player Model No. : DMP560 Rating : 12V , 24W, 2A Trade Mark : N.A. Measurement Procedure Used: FCC Rules and Regulations Part 15 Subpart B 2010 & FCC / ANSI C63.4-2009 The device described above is tested by Anbotek Compliance Laboratory Limited To determine the maximum emission levels emanating from the device. The maximum emission levels are compared to the FCC Part 15 Subpart B Class B limits both radiated and conducted emissions. The measurement results are contained in this test report and Anbotek Compliance Laboratory Limited Is assumed full responsibility for the accuracy and completeness of these measurements. Also, this report shows that the Equipment Under Test (EUT) is to be technically compliant with the FCC requirements. This report applies to above tested sample only. This report shall not be reproduced in part without written approval of Anbotek Compliance Laboratory Limited Date of Test : Nov. 19~23, 2011 Prepared by : (Engineer / Andy Chen) Reviewer : (Project Manager / Coco Xiang) Approved & Authorized Signer : (Manager / Henry Yang) Page 4 o f 30 FCC ID: Z32DMP560 Anbotek Compliance Laboratory Limited Report No. 201111761F 1. GENERAL INFO…

Text truncated - open the document above for the full version.

Page 1 o f 30 FCC ID: Z32DMP560 Anbotek Compliance Laboratory Limited Report No. 201111761F FCC TEST REPORT FOR 10MOONS TECHNOLOGY DEVELOPMENT CO., LTD. Digital Media Player Model No.: DMP560 Prepared for : 10MOONS TECHNOLOGY DEVELOPMENT CO., LTD. Address : 6F, Bldg. A, 10moons Technology Park, No.6 Hechang Road, Zhongkai High-tech Zone, Huizhou, P.R.China Prepared By : Anbotek Compliance Laboratory Limited Address : 1/F, 1/Build, SEC Industrial Park, No. 4 Qianhai Road, Nanshan District, Shenzhen, 518054, China Tel: (86) 755-26014771 Fax: (86) 755-26014772 Report Number : 201111761F Date of Test : Nov. 19~23, 2011 Date of Report : Nov. 24, 2011 Page 2 o f 30 FCC ID: Z32DMP560 Anbotek Compliance Laboratory Limited Report No. 201111761F TABLE OF CONTENTS Description Page Test Report Verification 1. GENERAL INFORMATION ............................................................................................................... 4 1.1. Description of Device (EUT) ..........................................................................................................................4 1.2. Auxiliary Equipment Used during Test ..........................................................................................................5 1.3. Description of Test Facility.............................................................................................................................6 1.4. Measurement Uncertainty ...............................................................................................................................6 1.5. Test Summary .................................................................................................................................................6 2. POWER LINE CONDUCTED MEASUREMENT ............................................................................ 7 2.1. Test Equipment ...............................................................................................................................................7 2.2. Block Diagram of Test Setup ..........................................................................................................................7 2.3. Power Line Conducted Emission Measurement Limits (FCC Part 15 Subpart B Class B) ............................8 2.4. Configuration of EUT on Measurement..........................................................................................................8 2.5. Operating Condition of EUT...........................................................................................................................8 2.6. Test Procedure.................................................................................................................................................8 2.7. Power Line Conducted Emission Measurement Results.................................................................................8 3. RADIATED EMISSION MEASUREMENT..................................................................................... 15 3.1. Test Equipment .............................................................................................................................................15 3.2. Block Diagram of Test Setup ........................................................................................................................15 3.3. Radiated Emission Limit (Subpart B Class B) ..............................................................................................16 3.4. EUT Configuration on Measurement ............................................................................................................16 3.5. Operating Condition of EUT.........................................................................................................................16 3.6. Test Procedure...............................................................................................................................................16 3.7. Radiated Emission Measurement Results .....................................................................................................17 4. PHOTOGRAPH ................................................................................................................................... 24 4.1. Photo of Power Line Conducted Emission Test............................................................................................24 4.2. Photo of Radiated Emission Test ..................................................................................................................25 APPENDIX I (Photos of EUT) (3 Pages) Page 3 o f 30 FCC ID: Z32DMP560 Anbotek Compliance Laboratory Limited Report No. 201111761F TEST REPORT VERIFICATION Applicant : 10MOONS TECHNOLOGY DEVELOPMENT CO., LTD. Manufacturer : 10MOONS TECHNOLOGY DEVELOPMENT CO., LTD. EUT : Digital Media Player Model No. : DMP560 Rating : 12V , 24W, 2A Trade Mark : N.A. Measurement Procedure Used: FCC Rules and Regulations Part 15 Subpart B 2010 & FCC / ANSI C63.4-2009 The device described above is tested by Anbotek Compliance Laboratory Limited To determine the maximum emission levels emanating from the device. The maximum emission levels are compared to the FCC Part 15 Subpart B Class B limits both radiated and conducted emissions. The measurement results are contained in this test report and Anbotek Compliance Laboratory Limited Is assumed full responsibility for the accuracy and completeness of these measurements. Also, this report shows that the Equipment Under Test (EUT) is to be technically compliant with the FCC requirements. This report applies to above tested sample only. This report shall not be reproduced in part without written approval of Anbotek Compliance Laboratory Limited Date of Test : Nov. 19~23, 2011 Prepared by : (Engineer / Andy Chen) Reviewer : (Project Manager / Coco Xiang) Approved & Authorized Signer : (Manager / Henry Yang) Page 4 o f 30 FCC ID: Z32DMP560 Anbotek Compliance Laboratory Limited Report No. 201111761F 1. GENERAL INFO…

Text truncated - open the document above for the full version.

Page 24 o f 30 FCC ID: Z32DMP560 Anbotek Compliance Laboratory Limited Report No. 201111761F 4. PHOTOGRAPH 4.1. Photo of Power Line Conducted Emission Test Page 25 o f 30 FCC ID: Z32DMP560 Anbotek Compliance Laboratory Limited Report No. 201111761F 4.2. Photo of Radiated Emission Test