Z3EXD-M9700TABLET PC

Tablet PC Android Instruction Manual Please learn about the product as follow the instruction Manual. Version: 1.0 9.7’ Tablet PC Manual 1 NOTICE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this equipment not expressly approved by Shenzhen Xind Communication Equipment Co.,Ltd may void the FCC authorization to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Radiofrequency radiation exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 9.7” Tablet PC Manual 2 1. Details Thank you for choosing our products. Our company promise to provide high quality product. Each of our products has been tested strictly before launch. Please read the instruction manual before your usage. 1.1 Appropriate Layout Cautions a. Keep away from moisture environment, such as the bathroom and kitchen. b. Usage under the range of temperature from 10-35 degree (50-95 Fahrenheit) with the moisture 20-80% a. Protect from blazing sunshine. Long-time exposure in high temperature may cause deformation. b. Please properly dispose the package and waste. c. Stay away from children. d. Please use it in a clear environment. e. Keep it away from the electromagnetic field. f. Away from Stereo System, for which may cause powerful electromagnetic field, data loss and LCD damage. 1.2 About Battery Caution a. Do not use other power adapter. Otherwise it may cause damage or fire. b. Keep it away from fire. Otherwise it may cause explosion or fire disaster. Do not put the machine in 60 degree (140 Fahrenheit), otherwise it may cause explosion. 9.7’ Tablet PC Manual 3 1.3 Connect to AC Power Supply Cautions a. Please do not use the loose or damaged outlet, otherwise it may cause electric shock or fire. b. Use ground connection safely, otherwise it may cause electric shock and damage the apparatus. c. Do not touch the socket by wet hand, otherwise it may cause electric shock. d. Keep the plug close to the outlet when move the power wire. e. Charge and use your tablet PC under the appropriate voltage/current. f. If you hear any fizzy sound near the socket, please remove the plug and ask customer service for help. g. Keep the plug close to the outlet. h. Do not buckle the wire or place heavy object on it. Keep it away from children and pets. Damaged wire may cause electrical shock or fire. i. Keep the wire and plug clean. j. If anything leaks into the apparatus or adapter, please remove the power wire or any cables and ask the customer service for help. k. Remove all the wires before cleaning. 1.4 Use the apparatus Cautions a. Please make sure you turn the power off when remove the tablet PC. Do not be stripped over. b. Obey the aviation guidance by air. Otherwise it may result in aircraft accident. c. Use soft cleaning product for PC only. Do not turn it power on while it is still wet. 9.7” Tablet PC Manual 4 d. Remove the power wires in rainy or thunderingdays,otherwise it may cause electric shock or fire. e. Do not place water, chemical reagent or any liquid on the tablet PC. The leaking may cause electrical shock, fire or damage. f. Mercury contained in the LCD screen. If the liquid in damaged screen splashes into your eyes or skin, please rinse the skin immediately and see doctor if necessary. g. Do not scratch the screen with point object. h. Do not press the screen hard, otherwise it may damage the LCD screen. i. Do not take the battery apart, otherwise it may cause electric shock. 2. To Learn About Your Tablet PC 2.1 Introduction of units and its function. 2.1.1 Front View ( 3) (1) ( 2) 9.7’ Tablet PC Manual 5 （1） Multi-touch screen （2） Backspace （3） Micro-camera 2.1.2 Dorsal View （1） Plastic Lid （2） TF Card Expansion Slot (Within the plastic lid) 2.1.3 Right Side View （1） Menu Key / Volume down （2） Search Key / Volume up （3） Screen-rotation Lock 2.1.4 Overhead View (1) (2) (3) (1)(2)(3) (1) (2) 9.7” Tablet PC Manual 6 （1） Headphone Jack （2） Microphone/ Reset （3） Power on and off/ Sleep and wake button 2.1.5底视图 Bottom View （1） 30 Pin （2） Speaker （3） Dock Connector 2.2 Accessories 2.2.1 Power Adapter Use under utility grid. (1)(2) (3) 9.7’ Tablet PC Manual 7 2.2.2 USB expansion (selected) 3. How to use 3.1 Charge Battery Whenthe built-in battery was low, it will show the icon on the status bar or on the screen. Please charge in time. Way to charge 1． Hock up the plug 2． The dynamic icon shows on the status bar. 3． The icon will show on the status bar whencha…

Text truncated - open the document above for the full version.

Shenzhen Xind Communication Equipment Co.,Ltd Floor 4&5,Block D, Baosheng Huangfeng Industrial Park, Xixiang Town, Bao’an District, Shenzhen ,China AGENCY AUTHORIZATION LETTER FCC ID: Z3EXD-M9700 Date: September 27, 2011 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: We, the undersigned, hereby authorize Shenzhen CTL Electromagnetic Technology Co., Ltd.(MR. Tracy Qi) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen CTL Electromagnetic Technology Co., Ltd. (MR. Tracy Qi) on our behalf shall have the same effect as acts of our own. This authorization expires on July 18, 2012. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Shenzhen Xind Communication Equipment Co.,Ltd are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Ken Wang/Manager Shenzhen Xind Communication Equipment Co.,Ltd Floor 4&5,Block D, Baosheng Huangfeng Industrial Park, Xixiang Town, Bao’an District, Shenzhen ,China Tel: +86-755-3367-8068 Fax: +86-755-3367-8082

6. External and Internal Photos of the EUT External Photos

FCC ID Label Information 1. Label location: 2. FCC ID Label: Shenzhen Xind Communication Equipment Co., Ltd Tablet PC Model:XD-M9700 FCC ID: Z3EXD-M9700 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Internal Photos ......................End of Report........................

   
       ㍷     !   "         "
# $!    %&' (" )'*'" +  
              +        ,,    - .     .-./ ,"  .     &012 +          
 3 ,
   3  "4"*  ."%5 "5  "  "6  7    8. 
 #（  3  - 3 ）  -   ..          /- .-., -  "       3  - 3 #   33    +  !   9 ㉓*  ,. -- ㉓' ;         $2<(.          + ㉓8   +   ㉓ 3  =  ,     , ㉓7
#>#'   

______ X Friday, July 17, 2009 C Core System Power Block A 10 i.MX51 Generic Reference Design 1 PUBI:FIUO:FCP:ICAP Classification: Page Title: ofSheetDate: RevDocument NumberSize Drawing Title: For up to 500mW dissipation in pass device, recommended part is: NSS12100UW3TCG TO-2.0 Sensitive analog lines. X1-X2 and Y1-Y2 make differential pairs. General-purpose Diagnostic LEDs (PUS_5) Open-drain required Put 4.7UF capacitors at pins G13, H13, H1 and J1. +/- 1% +/- 1% +/- 1% +/- 1% Current Monitor For up to 250mW dissipation in pass device, recommended part is: NSS12100XV6T1G (PUS_3) (PUS_7) (PUS_4) (PUS_0) Series resistors with 2.2uF caps are for regulator stability as indicated in minimum ESR requirement. Touch Screen Connector (PUS_1) (PUS_2) (PUS_6) NOTE: (PUS_X) means the Power Up Sequence index number during turn on. (PUS_9) (active high) 1.5V 2.775V 1.2V Note:If not requiring a single cell battery, customer may short BATT to BATTISNS to BP and remove Q2004, R67,C56, C57. Note: use 10uF for Coulomb Counting of a battery. DNP if not required. A 54 321 A 1 2345 <20> <20> <9,10,20,23> <9,10,20,23> <9,10,20,23> <9> <24> <24> <8> <8> <18> <23,24> <24> <4> <24> POWER C62 4.7UF C84 2.2UF C69 2.2UF 12 L7 2.2UH C87 15PF R77 0.02 C702.2UF C71 2.2UF C64 10UF 12 L9 2.2UH C77 2.2UF 1 2 3 4 5 6 7 8 Q5002 Si5855DC C83 2.2UF R8002 10K R149 0 C79 2.2UF R8001 100K R8003 10K R80 4.7K C59 4.7UF C76 2.2UF C61 4.7UF 12 L6 1.5UH C63 10UF C66 10UF R69 NC R78 0.02 C75 2.2UF C72 2.2UF C86 15PF R70 0.02 C73 104 C1001 2.2UF C5007 10UF TP8 C82 104 5 VCC 3 A2 2 GND 6 Y2 1 A1 4 Y1 U5003 NLX2G14 R89 4.7K R1001 10M C58 10UF C65 10UF R68 NC R5011 330 C5006 10UF 12 L82.2UH R74 0.02 C396 2.2UF C74 2.2UF C60 4.7UF C85 105 Controler Interface& Battery &ControlerINTERFACE Chager LED_Driver Back LightLED_Driver Buck 1050mA SW1 Buck 800mA SW2 Buck 800mA SW3 Buck 800mA SW4 BOOST 350mA 350mA VVIDEO SWBST 50mA VUSB2 150mA VAUDIO 100mA VIOHI 50mA VPLL 50mA VDIG 250mA VCAM 200mA VSD 200mA VENG1 350mA VENG2 50mA VENG3 100mA USB Generation Reference Interface SPI/I2C Interface Screen Touch A2 VUSB2 A3 VINUSB2 A5 SWBSTIN D5 GNDSWBST D8 GNDSWLED A7 SWLEDOUT A8 MODE A9 VCORE A10 BATT A11 CHRGRAW A12 CHRGCTRL2 B2 GPO1 C2 DVS2 A4 SWBSTOUT C4 LEDB C6 LEDKP B5 LEDR B9 GNDCORE C9 VCOREDIG B11 BP D9 CHRGCTRL1 B13 BATTISNSCC E3 VINPLL B1 VSDDRV A13 CHRGISNS B14 BATTISNS D1 VUSB C1 VSD C3 SWBSTFB D7 LEDMD B7 DVS1 B8 REFCORE B10 CHRGSE1B C10 LICELL C11 BATTFET C12 BPSNS D11 PWRON1 E1 UVBUS D2 VPLL C5 LEDG D6 GNDLED B6 UID C8 PUMS2 B12 GNDCHRG D10 CHRGLED E11 PWRON2 D13 ADTRIG E13 INT G13 GNDSW1 G14 GNDSW1 G1 GNDSW3 G2 GNDSW3 F2 VBUSEN G3 SW3FB C7 LEDAD A6 GNDSUB1 B3 GNDSUB1 B4 GNDSUB1 D3 GNDSUB1 D4 GNDSUB1 E4 GNDSUB1 E5 GNDSUB1 E6 GNDSUB1 E7 GNDSUB2 E8 GNDSUB2 E9 GNDSUB2 E10 GNDSUB2 F4 GNDSUB2 F5 GNDSUB2 F6 GNDSUB2 F7 GNDSUB3 F8 GNDSUB3 F9 GNDSUB3 F10 GNDSUB3 G4 GNDSUB3 G5 GNDSUB3 G6 GNDSUB3 G7 GNDSUB3 G8 GNDSUB3 C13 GPO3 E12 GPO2 E14 RESETBMCU F13 RESETB F14 SW1OUT F1 SW3OUT F3 VINUSB J3 SW4FB E2 GNDREG2 G9 GNDSUB4 G10 GNDSUB4 G11 GNDSUB4 H3 GNDSUB4 H5 GNDSUB4 H6 GNDSUB4 H7 GNDSUB4 H8 GNDSUB4 H9 GNDSUB5 H10 GNDSUB5 H12 GNDSUB5 J5 GNDSUB5 J6 GNDSUB5 J7 GNDSUB5 J8 GNDSUB6 J9 GNDSUB6 J10 GNDSUB6 K4 GNDSUB6 K5 GNDSUB6 K6 GNDSUB6 K7 GNDSUB6 C14 PUMS1 F12 WDI D14 GPO4 H13 SW1IN H14 SW1IN H1 SW3IN H2 SW3IN P2 MISO L3 GNDSPI N4 GNDREG3 K8 GNDSUB7 K10 GNDSUB7 L4 GNDSUB7 L5 GNDSUB7 L6 GNDSUB7 L10 GNDSUB7 P5 GNDSUB8 P7 GNDSUB8 P8 GNDSUB8 P9 GNDSUB8 P10 GNDSUB8 F11 GNDCTRL G12 SW1FB L12 STANDBYSEC J13 SW2IN J14 SW2IN J1 SW4IN J2 SW4IN N2 MOSI M3 CLK32KMCU M6 STANDBY N11 GNDADC P12 GNDREG1 D12 PWRON3 M12 TSX1 J12 SW2FB M13 TSX2 L14 SW2OUT L1 SW4OUT K3 SPIVCC P3 PWGTDRV1 M4 CLK32K L7 VCAM M8 CFP M9 CFM N12 ADIN5 P13 ADIN6 K12 VVIDEODRV K13 GNDSW2 K14 GNDSW2 K1 GNDSW4 K2 GNDSW4 L2 CS L11 TSY2 L13 VVIDEO N1 VGEN3 M1 CLK N3 VGEN2 M5 VSRTC P6 GNDRTC M7 VINCAMDRV N8 PWGTDRV2 L9 VDIG P11 VINDIG M10 VGEN1DRV N13 ADIN7 M14 TSY1 N14 TSREF M2 VINGEN3DRV P4 VGEN2DRV N5 XTAL2 N6 XTAL1 L8 VINAUDIO N7 VAUDIO N9 VIOHI N10 VINIOHI M11 VGEN1 U7 PC13892JVL 1 23 4 Y1 32.768KHz C279 104 C280 104 C304 104 C305 104 C306 104 C307 104 1 2 3 C370 104 C371 104 C372 104 21 FB5 75 OHM@100MHZ 1 2 3 12 D24 SS34 R330 0 1 2 3 C2 10UF C57 104 C68 10UF C78 104 + C3 47uF/10V + C47 47uF/10V C46 10UF TP96 TP97 C290 104 1V8_ANA_PLL GND VCC_BP 1V2_DIG1 GND VCC_BP GND GND GND VCC_BP VCC_BP VCC_BP VCC_BP GND GND GND GND GND GND GND GND GND GND VCC_BP GND GND GND VCC_BP VCC_BP VCC_BP VCC_BP GND GND GND GND GND 2V775_BOOT VDDGP 1V8_DDR GND VCC 1V2_RTC 3V3_USB_MX51 2V775 1V65 1V8_DIG2 3V15_BOOT 3VANA_PMC 2V6 VCC_BP VCC_BP VCC_BP GNDGND 2V775_BOOT GND 5V_MAIN GND GND VCC_BP GND 1V8_DDR 2V775_BOOT 2V775_BOOT GND VCC_BP GND GND VCC_BP GND VCC_BP GND SPI1_MOSI SPI1_SCLK SPI1_MISO SPI1_SS0_PMIC CKIL INT_FROM_PMIC(GPIO1_8) VDDGP_SENSE VCC_SENSE RESET_IN_B POR_B ACCESSORY_CARD_ID1 TOUCH_Y1 TOUCH_Y0 TOUCH_X1 TOUCH_X0 WDOG_B(GPIO1_4) SW2 SW4_OUT_N VCORE VCOREDIG VGEN1DRV PWRON1 SW4 SW4_OUT PWRON3 SW3 SW1 GPO1 REFCORE SW1_OUT ADIN5 SW4_OUT_N VCOREDIG SW4_OUT SW1_OUT ADIN5 SYS_ON_OFF_CTL(ATLAS) MX51_DEGREES GPO1 3V3 SD2_3V3 3V3 GND VCC_BP 3.3V_PMU105 ______ X Friday, July 17, 2009 C 2 i.MX51 Generic Reference Design 10 A iMX Power Rails PUBI:FIUO:FCP:ICAP Classification: Page Title: ofSheetDate: RevDocument NumberSize Drawing Title: TO2.0 (19X19) Added SD2_3V3 supply option for NVCC_PER15 Change the 10uf capacitor voltage tolerance from 16V to 6.3V_______Jason Yang +/- 1% A B C D 54321 D C B A 12345 <7> <7> 21 L13 120 OHM@100MHZ C133 104 C111 104 21 L11 120 OHM@100MHZ C105 103 C104 10UF C92 224 C94 103 C120 104 C125 104 C116 104 C98 224 C118 104 C99 224 C157 103 21 L14 120 OHM@100MHZ C141 104 C149 104 C100 224 C106 103 C117 10UF C156 104 C134 104 + C108 47uF/10V C137 104 C95 103 C155 104 C129 104 C143 104 C101 224 C97 10UF R97 0.02 C151 104 C126 104 R426 0 C121 104 C96 10UF C102 224 C112 103 C103 224 C142 104 21 L12 120 OHM@100MHZ C128 10UF C150 104 C131 104 C107 103 C109 224 C136 104 i.MX51 - POWER A1 GND_1 A…

Text truncated - open the document above for the full version.

Shenzhen CTL Electromagnetic Technology Co., Ltd. Tel: +86-755-89486194 Fax: +86-755-89486187 FCC PART 15 SUBPART B TEST REPORT FCC Part 15B Report Reference No......................: CTL11088535-S-WF Compiled by ( position+printed name+signature)..: File administrators Andy Zhang Name of the organization performing the tests ( position+printed name+signature)..: Test Engineer Kendy Wang Approved by ( position+printed name+signature)..: Manager Tracy Qi Date of issue.....................................: September 14, 2011 Representative Laboratory Name.: Shenzhen CTL Electromagnetic Technology Co., Ltd. Address.............................................: Suite 2123, Building 4, Hongfa Centre, Central Area Baoan, Baoan District, Shenzhen, Guangdong, 518101, P.R. China Test Firm..........................................: Bontek Compliance Testing Laboratory Ltd Address.............................................: 1/F, Block East H-3, OCT Eastern Ind. Zone, Qiaocheng East Road, Nanshan, Shenzhen, China Applicant’s name............................: Shenzhen Xind Communication Equipment Co., Ltd Address.............................................: Floor 4&5, Block D, Baosheng Huangfeng Industrial Park, Xixiang Town, Bao’an District, Shenzhen, China Test specification: Standard ...........................................: FCC Part 15B: Unintentional Radiators TRF Originator ..................................: Shenzhen CTL Electromagnetic Technology Co., Ltd. Master TRF.......................................: Dated 2011-01 Shenzhen CTL Electromagnetic Technology Co., Ltd.. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Electromagnetic Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Electromagnetic Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .................... : Tablet PC Trade Mark .......................................: / Model/Type reference.......................: XD-M9700 I/O Type of EUT................................: USB Port/ Earphone Port/ DC Input Port I/O Q’TY............................................: 1/ 1/ 1 Antenna Type..............................: / FCC ID.......................................: Z3EXD-M9700 Result................................................: Positive V1.0 Page 2 of 21 Report No.: CTL11088535-S-WF T E S T R E P O R T Test Report No. : CTL11088535-S-WF September 14, 2011 ______________________________________________________________________________________________ Date of issue Equipment under Test : Tablet PC Model /Type : XD-M9700 Listed Models : XD-M9701, XD-M9702, XD-M9703, XD-M9704, XD-M9705, XD-M9706, XD-M9707, XD-M9708, XD-M9709, XD-M82F02, XD-M8SF01 Applicant : Shenzhen Xind Communication Equipment Co., Ltd Address : Floor 4&5, Block D, Baosheng Huangfeng Industrial Park, Xixiang Town, Bao’an District, Shenzhen, China Manufacturer Shenzhen Xind Communication Equipment Co., Ltd Address Floor 4&5, Block D, Baosheng Huangfeng Industrial Park, Xixiang Town, Bao’an District, Shenzhen, China Test Result according to the standards on page 4: Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. V1.0 Page 3 of 21 Report No.: CTL11088535-S-WF Contents 1. TEST STANDARDS .................................................................. 4 2. SUMMARY............................................................................. 5 2.1. General Remarks 5 2.2. Equipment Under Test 5 2.3. Short description of the Equipment under Test (EUT) 5 2.4. EUT operation mode 5 2.5. EUT configuration 5 2.6. Related Submittal(s) / Grant (s) 6 2.7. Modifications 6 3. TEST ENVIRONMENT............................................................... 7 3.1. Address of the test laboratory 7 3.2. Test Facility 7 3.3. Environmental conditions 7 3.4. Configuration of Tested System 7 3.5. Statement of the measurement uncertainty 8 3.6. Equipments Used during the Test 8 3.7. Summary of Test Result 9 4. TEST CONDITIONS AND RESULTS ............................................ 10 4.1. Conducted Emissions Test 10 4.2. Radiated Emissions Test 13 5. TEST SETUP PHOTOS OF THE EUT .......................................... 17 6. EXTERNAL AND INTERNAL PHOTOS OF THE EUT ....................... 18 V1.0 Page 4 of 21 Report No.: CTL11088535-S-WF 1. TEST STANDARDS The tests were performed according to following standards: FCC PartB : Unintentional Radiators ANCI C63.4: 2003 V1.0 Page 5 of 21 Report No.: CTL11088535-S-WF 2. SUMMARY 2.1. General Remarks Date of receipt of test sample : August 25, 2011 Testing commenced on : August 28, 2011 Testing concluded on : September 5, 2011 2.2. Equipment Under Test Power supply system utilised Power supply voltage : z 120V / 60 Hz o 115V / 60Hz o 12 V DC o 24 V DC o Other (specified in blank below) 2.3. Short description of the Equipment under Test (EUT) The device is a Tablet PC. For more details, refer to the user’s manual of the EUT. Serial number: Prototype 2.4. EUT operation mode Test Mode: 1. The EUT has been tested under normal operating condition. 2. No test program used to control the EUT within testing. 3. EUT Function and Test Mode The field strength of radiation emission was measured in the following position: EUT stand-up position (Y axis), lie-down position (X, Z axis). The following data show only with the worst case setup. The worst case of Y axis was reported. Based on client request, all normal using modes of the normal function were tested but only the worst test data of the worst mode is reported by this report. 2.5. EUT configuration The following peripheral devices and interface cables were connected during the meas…

Text truncated - open the document above for the full version.

5. Test Setup Photos of the EUT