Z63-HEADSET001Bluetooth Headset

Bluetooth Headphone Manual Thank you for purchasing the stereo Headphone with Bluetooth Wireless technology; we encourage you to read this quick installation guide thoroughly to get the most of this innovative wireless headphone. 1. Package content: Headphone; USB cable charger; User manual. 2. Button function: 1. Volume up 2. Next Track 3. Volume down 4. Previous track 5. Play/Pause 6. Power on/off 3. LED Status indicator · Blue LED flashes very fast indicates the device is powered on and/or connected ·Solid red LED indicates the battery is charging. When the battery has reached full capacity, the solid red LED will go off. 4. Charge your headphone · Use the supplied USB cable to charge the battery directly from your PC. ·Make sure that your headphone is fully charged before using it for the first time. ·The headphone battery has to be initially charged for at least for 4 hours. Thereafter, the battery will take from 3 to 4 hours to recharge. 5. Advanced operation Note: Before installing this product, please make sure your laptop has the built-in Bluetooth feature available. If your laptop is not bluetooth-enabled, you must purchase a bluetooth dongle, preferably version 2.1 or above. a. Pairing the headphones with your laptop 2. Activate the bluetooth program in your laptop to begin setup. 3. The “Search new device” screen will be displayed. 4. Place both devices not more than one meter away from each other. 5. Press the power button on the headphone to turn it on. The blue LED will start blinking per second. This indicates that the headphone has entered pairing mode. 5. You will find the product name “ANS 872” occurs on your laptop, press “pairing”. 6. If the pairing is successful, the blue LED will stay lit. b. Pairing the headphone with your phone 1. Make sure the headphone is off. 2. Set your bluetooth phone to “discover” the wireless headphone. 3. Place both devices not more than one meter away from each other. 4. Press the power button on the headphone to turn it on. The blue LED will start blinking per second. Press Play/pause button for about 2 seconds, you will hear “ready to pair”, this indicates that the headphone has entered pairing mode. 5. You will find the product name “ANS 872” occurs on your phone, press “pairing”. 6. If the pairing is successful, the blue LED will stay lit. Please note: If your laptop/phone device is under version 2.1, please enter the passkey =”0000”(4 zero). 6. Answering and ending a call using your mobile phone · When there is an incoming call, the headphone will ring. · Briefly press the power button to answer an incoming call. Music playback pauses temporarily. ·To end a call simply tap the power button once again. As soon as you hang up, music playback resumes automatically. 7. Specifications: Mic. Spec.: Microphone Unit: ￠6*5mm Directivity: omnidirectional S.P.L: -53±3dB Impedance: ≤2.2KΩ Frequency response: 20Hz-10,000Hz Operating Voltage: 4.5 Speaker Spec.: Speaker diameter:￠40mm Impedance:32Ω S.P.L: 114±3dB S.P.L at 1KHZ Rated power: 20mW Aggregate capability: 40mW Frequency response: 20Hz-20,000Hz Power: Battery type: Built-in 360mAh Lithium-polymer rechargeable battery Charging connector type: Micro USB 5V/1A Run time: Up to 10 hours of talking or music playback time Standby time: 90 hours Charging time: 3-4 hours 8. Attention: 1. If you cannot power on the headphone, please check your power and charge it. 2. Please remember to power off the headphone when you are not using it. 3. If you haven’t used the headphone for a long time, pls. charge it before using. 4. Do NOT disassemble, repair or modify the headphone by yourself. 5. Do NOT store the device in a place with high humidity or dust FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

ShenZhen Aoni Electronic Industry Co., Ltd.

ShenZhen Aoni Electronic Industry Co., Ltd.

External Photographs Model 872 EUT –External Photos Model 877 EUT –External Photos Model 869 EUT –External Photos

Label and Location FCC ID: Z63-HEADSET001

Internal Photographs of Model 872 EUT –Uncovered View EUT –PCB View Internal Photographs of Model 877 EUT –Uncovered View EUT –PCB View Internal Photographs of Model 869 EUT –Uncovered View EUT –PCB View Internal Photographs of RF Modular EUT –PCB View

FCC RF Exposure FCC ID: Z63-HEADSET001 Frequency: 2402-2480 MHz (79 channels) Mid-Channel: 2.441 GHz (channel 39) Mid-Channel Peak Power, Conducted: -2.00 dBm == 0.63 mW Antenna Gain: G = -3 dBi Peak, Radiated = -2.00 dBm + -3 dBi = -5 dBm = 0.32 mW SAR Test Exclusion Thresholds specified in KDB447498 Appendix A: Evaluation: The Calculated Radiated Peak output power is taken as worst case, and this emission level appears to be far under the maximum allowed emission level at even the closest distance for 2.4G device specified in this table. Conclusion: The emitted power appears to be (far) below the required limit, so PASS.

Test Report of FCC Part 15 C for FCC Certificate On Behalf of ShenZhen Aoni Electronic Industry Co., Ltd. FCC ID: Z63-HEADSET001 Product Description: Bluetooth Headset Test Model: 872 Supplement Model: 869, 877 Trade Mark: ANC, Aoni Prepared for: ShenZhen Aoni Electronic Industry Co., Ltd. HongHui Industrial Park,2nd LiuXian Road, Xin'An streets, District 68, Bao'an District,ShenZhen,China Prepared by: Shenzhen Laker Testing Technology Co.,Ltd 15C，Block 1,Sunshine Huayi Building,Nanhai West Road, Nanshan, Shenzhen, China Tel: 86-755-86307736 Fax: 86-755-86307199 Report No.: LK13GR-0162E-1 Issue Date: August 02, 2013 Test Date: July 25~August 02, 2013 Test by: Reviewed By: Owen Li Edmund Zou Report No.: LK13GR-0162E-1 Page 2 of 62 FCC ID: Z63-HEADSET001 TABLE OF CONTENTS 1. GENERAL INFORMATION....................................................................................................................................4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT).........................................................................4 1.2TEST FACILITY.......................................................................................................................................................5 1.3 RELATED SUBMITTAL(S) / GRANT (S)...................................................................................................................5 1.4 MEASUREMENT UNCERTAINTY.............................................................................................................................5 2. SYSTEM TEST CONFIGURATION......................................................................................................................6 2.1 EUT CONFIGURATION..........................................................................................................................................6 2.2 EUT EXERCISE.....................................................................................................................................................6 2.3 GENERAL TEST PROCEDURES.............................................................................................................................6 2.4 LIST OF MEASURING EQUIPMENTS.......................................................................................................................7 2.5 LIST OF AUXILIARY DEVICE....................................................................................................................................9 3. SUMMARY OF TEST RESULTS.........................................................................................................................10 4. CONDCUTED EMISSION TEST.........................................................................................................................11 4.1 APPLICABLE STANDARD.....................................................................................................................................11 4.2 LIMITS..................................................................................................................................................................11 4.3 EUT TEST SETUP..............................................................................................................................................11 4.4 PROCEDURE OF CONDUCTED EMISSION TEST.................................................................................................12 4.5 TEST RESULT......................................................................................................................................................12 5. TEST OF HOPPING CHANNEL BANDWIDTH................................................................................................15 5.1 APPLICABLE STANDARD.....................................................................................................................................15 5.2 EUT SETUP........................................................................................................................................................15 5.3 TEST EQUIPMENT LIST AND DETAILS.................................................................................................................15 5.4 TEST PROCEDURE..............................................................................................................................................15 5.5 TEST RESULT......................................................................................................................................................15 6. TEST OF HOPPING CHANNEL SEPARATION...............................................................................................19 6.1 APPLICABLE STANDARD.....................................................................................................................................19 6.2 EUT SETUP........................................................................................................................................................19 6.3 TEST EQUIPMENT LIST AND DETAILS.................................................................................................................19 6.4 TEST PROCEDURE..............................................................................................................................................19 6.5 TEST RESULT......................................................................................................................................................19 7. TEST OF NUMBER OF HOPPING FREQUENCY...........................................................................................23 7.1 APPLICABLE STANDARD.....................................................................................................................................23 7.2 EUT SETUP........................................................................................................................................................23 7.3 TEST EQUIPMENT LIST AND DETAILS..........................…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOGRAPHS Radiated Emission Conducted Emission