Z6A01TEKAirhead Headset

CERTIFICATE OF COMPLIANCE Ref No.: NEI-FCCE-1-1110C131 Date of Issue: Nov. 07, 2011 Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the Neutron EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B, established by the FCC, USA. Equipment Airhead Headset Model Name airhead 1000; PC91 Brand Name TEKNMOTION; SOMIC Applicant Digital Interactive Systems Corp. DBA CompuExpert DBA TekNmotion Address 26801 Vista Terrace, Lake Forest CA. 92630 Measurement ANSI C63.4 (2003) Method The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCE-1-1110C131) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Andy Chiu Authorized Signatory Neutron Engineering Inc. B1, No.37, Lane 365, Yang Guang St., NeiHu District 114., Taipei, Taiwan TEL：+886-2-2657-3299 FAX：+886-2-2657-3331

1 Twynam, Tom From: Cheng, Nicolas Sent: 18 November 2011 11:12 To: Twynam, Tom Cc: Pong, Jeff Subject: RE: Emailing: Donglegrant, US003037-TCB-Grant-Info Dear Tom As our client reply that the label height (of 10mm) as shown in the example is such that when viewed in the actual size of 10mm, the text is of a size that no human can read because each character is less than 1mm in height. Therefore, the compliance statement appear in the user manual and the device label bear the FCC ID. Thanks. BR Nicolas -----Original Message----- From: Twynam, Tom Sent: Friday, November 18, 2011 5:59 PM To: Cheng, Nicolas Cc: Pong, Jeff Subject: RE: Emailing: Donglegrant, US003037-TCB-Grant-Info Dear Nicolas, The guidance states:- If the labelling area for the device is so small, and/or it is not practical to place the compliance statement on the device, then the statement can be placed in the user manual or product packaging. I don’t think that the area is too small because the example label I sent is 10mm by 39mm. See attached. A stronger justification is required other than it is hard. Best Regards Tom Twynam -----Original Message----- From: Cheng, Nicolas Sent: 18 November 2011 08:57 To: Twynam, Tom Cc: Pong, Jeff Subject: RE: Emailing: Donglegrant, US003037-TCB-Grant-Info Dear Tom, We requested client to add the statement. But the Headset only have 1.6cm width, so they hard to add this. Attached the photo for justification. Hope you can help. 2 Thanks a lot. BR Nicolas -----Original Message----- From: Twynam, Tom Sent: Friday, November 18, 2011 4:19 PM To: Cheng, Nicolas Cc: Pong, Jeff Subject: Emailing: Donglegrant, US003037-TCB-Grant-Info Importance: High Dear Nicolas, Here is the grant for the dongle. I cannot waive the rule for the wording on the product without justification. Best Regards Tom Twynam

Neutron Engineering Inc. Project No.: 1110C131 Page 2 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 2 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 3 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 3 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 4 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 4 of 11 1110C131 1110C131

Brand name Brand name Model name

Neutron Engineering Inc. Project No.: 1110C131 Page 5 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 5 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 6 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 6 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 7 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 11 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 7 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 8 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 8 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 9 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 10 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 10 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 11 of 11 1110C131 1110C131 Neutron Engineering Inc. Project No.: 1110C131 Page 11 of 11 1110C131 1110C131

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1110C131 Page 58 of 60 7. EUT TEST PHOTO Conducted Measurement Photos Wireless Mode Neutron Engineering Inc. Report No.: NEI-FCCP-1-1110C131 Page 58 of 60 7. EUT TEST PHOTO Conducted Measurement Photos Wireless Mode Neutron Engineering Inc. Report No.: NEI-FCCP-1-1110C131 Page 59 of 60 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1110C131 Page 59 of 60 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1110C131 Page 60 of 60 Radiated Measurement Photos Above 1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1110C131 Page 60 of 60 Radiated Measurement Photos Above 1000MHz