ZBC-SH207CTSmart Tag

1. Press the power button,and you will hear a"Di" sound, indicating a successful boot.2.Turn on the Apple Find My app. Click "ltems",then click "Add ltem", then follow theinstructions shown. 3.Click “Other Supported Items”.4.Find “SH-207 &7 ”, click
“Connect”. 50mm 50mm - 5 - Factory setting:1.Press and hold the button, release the button when you hear 'Di-DiDi-DiDiDi-Di' sound; Afterreleasing button, you will hear a 'DiDi' sound.2.Your Find My accessory has now beensuccessfully reset.Tip: Press and hold the button, you will hear'Di-DiDi-DiDiDi-Di' sound, then immediatelyrelease, After hearing two "Di-Di" sound,indicating the operation was successful.How to remove items from the Apple Find Myapp:Navigate to the project page in Apple's Find Myapp. Scroll down to the bottom and tap Deleteltem, then tap Delete. The card has beensuccessfully removed. ADDTIONAL TIPS - 6 - How to turn off the card:- Press and hold the button for about 6seconds; you will hear 'Di-DiDi-DiDiDi', thenrelease.Tip: You can hold the button until you hear 'Di-DiDi-DiDiDi' sound, then release; after releasingit is turned off.Perform Serial Number Lookup:You can use the Find My app on an iPhone tolearn about Smart Card that’s been misplacedor lost by its owner.Open the Find My app, scroll to the bottom ofthe Items tab, then tap Identify Found Item.1.Launch the "Find My" app on your iPhone.2.Scroll to the bottom of the "Items" tab, thentap "Identify Found Item". ADDTIONAL TIPS - 8 - SPECIFICATIONS - 7 - 3.Keep the Find My accessory near the iPhone.Once the iPhone has detected the Find Myaccessory, select it from the list of found items.4.You will be taken to a page where you canlearn about the item.5.Locate the button on the front of the Find Myaccessory and press and hold until hear 'Di-DiDi', then release.6.Once connected to the Find My accessory, tap "Continue On Website" to see if the owner has left a Lost Mode message and view the item's serial number. ADDTIONAL TIPS - 1 - Requires before connecting:- An iPhone, iPad, or iPod touch with iOS 14.5 orlater, with two-factor authentication enabled.- Find My and Bluetooth enabled.- A strong Wi-Fi or cellular connection.- Location Services turned on: Settings >Privacy > Location Services.- For Precision Finding, enable Location Accessfor Find My: Settings > Privacy > LocationServices, scroll and tap on Find My, chooseWhile Using the App / Widgets, then enablePrecision Location. HOW TO SET UP YOUR SMART CARD - 2 - HOW TO SET UP YOUR SMART CARD - 10 - Use of the Works with Apple badge means thata product has been designed to workspecifically with the technology identified in thebadge and has been certified by the productmanufacturer to meet Apple Find My networkproduct specifications and requirements. Appleis not responsible for the operation of thisdevice or use of this product or its compliancewith safety and regulatory standards.Apple, Apple Find My, Apple Watch, Find My,iPhone, iPad, iPadOs, Mac, macOS and watchOSare trademarks of Apple lnc., registered in theU.S. and other countries. IOS is a trademark orregistered trademark of Cisco in the U.S. andother countries and is used under license. - 3 - - 4 - If you have added other items, you need to clickon the plus sign at the top right and enter it byclicking on other items.Navigate to the item page on the Apple FindMy app. Click "ltems",then Swipe left on theitem you want to remove. ADDTIONAL TIPS HOW TO SET UP YOUR SMART CARD SH-207 &7 ^ŵĂƌƚ d ĂŐ Model: SH-207 &7 PowerButton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¶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‡ 5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD ‡ ,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHU‡ &RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIU RPWKDW WRZKLFKWKHUHFHLYHULVFRQQHFWHG‡ &RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUK HOS - 9 - To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended.

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: SHENZHEN DNS INDUSTRIES CO., LTD. Address: 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China FCC ID: ZBC-SH207CT Date: Jan. 29, 2026 2.911(d)(7) USA Designated Agent for Service of Process We, [SHENZHEN DNS INDUSTRIES CO., LTD.] (“the applicant”) designate [Wedo Group] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Wedo Group Address: 710 Arabian Ln Walnut, CA 91789, United States FRN：0037730611 Contact Name: Jeffrey Chen Telephone No: (323) 528-1888 Email: [email protected] Applicant Company name: SHENZHEN DNS INDUSTRIES CO., LTD. Address: 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China FRN: 0020639597 Contact Name: Yuki Wu Telephone No: +86-755-83401338 Email: [email protected] Signature: Signature:

SHENZHEN DNS INDUSTRIES CO., LTD. 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Jan. 29, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: ZBC-SH207CT SHENZHEN DNS INDUSTRIES CO., LTD. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Yuki Wu Title: Certification Engineer Address: 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Tel.: +86-755-83401338 Email: [email protected]

SHENZHEN DNS INDUSTRIES CO., LTD. 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Jan. 29, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: ZBC-SH207CT Product Name: Smart Tag This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Yuki Wu Title: Certification Engineer Address: 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Tel.: +86-755-83401338 Email: [email protected] SHENZHEN DNS INDUSTRIES CO., LTD. 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

SHENZHEN DNS INDUSTRIES CO., LTD. 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Jan. 29, 2026 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: ZBC-SH207CT Models: SH-207CT, NFC1-207C1, NFC1-207C2, NFC1-207G1, NFC1-207G2, NFC1-207AG, KASMCRDCG1A, KASMCRDCG2A, KASMCRDCG4A To Whom It May Concern: We, The SHENZHEN DNS INDUSTRIES CO., LTD. hereby declare that the model, Difference Description as follows: Product name Trade name Name No. Description Smart Tag DNS SH-207CT Support IOS and Google device NOVOO NFC1-207C1, NFC1-207C2 Only support IOS device NFC1-207G1, NFC1-207G2 Only support Google device NFC1-207AG Support IOS and Google device Kogan KASMCRDCG1A, KASMCRDCG2A, KASMCRDCG4A Support IOS and Google device Sincerely, SHENZHEN DNS INDUSTRIES CO., LTD. SHENZHEN DNS INDUSTRIES CO., LTD. 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Signature: [Yuki Wu, Certification Engineer]

SHENZHEN DNS INDUSTRIES CO., LTD. 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 29, 2026 Subject; Request for Confidentiality FCC ID: ZBC-SH207CT To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Yuki Wu Title: Certification Engineer

SHENZHEN DNS INDUSTRIES CO., LTD. 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Jan. 29, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: ZBC-SH207CT I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Attestation of Global Compliance (Shenzhen) Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with SHENZHEN DNS INDUSTRIES CO., LTD.. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Full name of contact person listed on FCC’s website: Yuki Wu Title: Certification Engineer Tel: +86-755-83401338 Fax: +86-755-83301489 Email: [email protected]

Report No.: AGC05803260101AP03 Page 1 of 3 EXTERNAL PHOTOS Top view of EUT Bottom view of EUT Report No.: AGC05803260101AP03 Page 2 of 3 Front view of EUT Back view of EUT Report No.: AGC05803260101AP03 Page 3 of 3 Left view of EUT Right view of EUT ****************************************End of Report*************************************

FCC ID Label Location 20mm*30mm FCC ID:ZBC-SH207CT

Report No.: AGC05803260101AP03 Page 1 of 3 INTERNAL PHOTOS Open view of EUT Internal view-1 of EUT Report No.: AGC05803260101AP03 Page 2 of 3 Internal view-2 of EUT Internal view-3 of EUT BT Antenna Report No.: AGC05803260101AP03 Page 3 of 3 Internal view-4 of EUT ****************************************End of Report*************************************

Page 1 of 10 RF Exposure Report Report No.: AGC05803260101FH01 FCC ID : ZBC-SH207CT APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Smart Tag BRAND NAME : DNS, NOVOO, Kogan MODEL NAME : SH-207CT, NFC1-207C1, NFC1-207C2, NFC1-207G1, NFC1-207G2, NFC1-207AG, KASMCRDCG1A, KASMCRDCG2A, KASMCRDCG4A APPLICANT : SHENZHEN DNS INDUSTRIES CO., LTD. DATE OF ISSUE : Jan. 29, 2026 STANDARD(S) : FCC Part 2 Subpart J §2.1093 FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC05803260101FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jan. 29, 2026 Valid Initial Release Report No.: AGC05803260101FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC05803260101FH01 Page 4 of 10 1. General Information Applicant SHENZHEN DNS INDUSTRIES CO., LTD. Address 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Manufacturer SHENZHEN DNS INDUSTRIES CO., LTD. Address 23/F Building A, Shenzhen International Innovation Center, No. 1006 Shennan Road, Futian, Shenzhen, 518026, China Factory 1 HUIZHOU DNS TECHNOLOGY CO., LTD. Address 1 5 Dongshun South Road, Dongjiang Hi-tech Industrial Park, Zhongkai Hi-tech Zone, Huizhou City, Guangdong, China Factory 2 D AND S INDUSTRIES (PHILIPPINES) CORPORATION Address 2 1 to 5 Orient Goldcrest Suntrust Ecotown Building 2, Lot 8 Block 8, Sahud Ulan, Tanza, Region IV-A, Cavite, Philippines Product Designation Smart Tag Brand Name DNS, NOVOO, Kogan Test Model SH-207CT Series Model(s) NFC1-207C1, NFC1-207C2, NFC1-207G1, NFC1-207G2, NFC1-207AG, KASMCRDCG1A, KASMCRDCG2A, KASMCRDCG4A Difference Description Refer to page 5 Date of receipt of test item Jan. 04, 2026 Date of Test Jan. 04, 2026~ Jan. 29, 2026 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Jasiel Xie (Project Engineer) Jan. 29, 2026 Reviewed By Bibo Zhang (Reviewer) Jan. 29, 2026 Approved By Angela Li (Authorized Officer) Jan. 29, 2026 Report No.: AGC05803260101FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) 2.402GHz ~ 2.480GHz Hardware Version V1.0 Software Version 1.0.0 Modulation Type GFSK Maximum Transmitter Power Bluetooth LE (1Mbps): 4.166dBm Bluetooth LE (2Mbps): 4.121dBm Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain 2.089dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Difference Description: Product name Trade name Name No. Description Smart Tag DNS SH-207CT Support IOS and Google device NOVOO NFC1-207C1, NFC1-207C2 Only support IOS device NFC1-207G1, NFC1-207G2 Only support Google device NFC1-207AG Support IOS and Google device Kogan KASMCRDCG1A, KASMCRDCG2A, KASMCRDCG4A Support IOS and Google device Report No.: AGC05803260101FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a …

Text truncated - open the document above for the full version.

Product specifications acknowledgment Description ： PCB Antenna 2.4G 1.1 Specifications Antennas Type on board Frequency range (MHz) 2400~2480 Input Impendence (Ω) 50 V.S.W. R<2 Gain (dbi) 2.089 dbi Polarization Type vertical Power Capacity (w) 0.1 W Lightning Protection NA Voltage（V） NA Dimension（mm） 5.5X16mm Radiator Copper Operating Temperature（°C） -40~80 Storage Temperature（°C） -40~80 1.2 Antenna Picture Dimension 16 X 5.5 mm 2. Electrical Specification 2.1 Test Equipment A. VSWR andinput impedance: Agilent 8753/E5071 Network Analyzer B. Antenna gain and efficiency: frequency Gain dbi efficiency 2400 1.6259 0.5477 2410 1.6492 0.5561 2420 2.0477 0.5912 2430 2.0259 0.5919 2440 2.089 0.5741 2450 2.0095 0.5761 2460 1.9319 0.5983 2470 1.9542 0.5656 2480 1.9746 0.5227 2490 1.5673 0.5021 2500 1.5574 0.5128 Designed: INPLAY INC Address: 1 TECHNOLOGY DR, STE J 72B, IRVINE, CA 92618 Tested: Shenzhen Sheng banger Technology Co., LTD Address: 2 / F, Building B25, Heng Feng Industrial City, Huzhou, Xinxiang, Baoan District, Shenzhen

Page 1 of 70 FCC Test Report Report No.: AGC05803260101FR01 FCC ID : ZBC-SH207CT APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Smart Tag BRAND NAME : DNS, NOVOO, Kogan MODEL NAME : SH-207CT, NFC1-207C1, NFC1-207C2, NFC1-207G1, NFC1-207G2, NFC1-207AG, KASMCRDCG1A, KASMCRDCG2A, KASMCRDCG4A APPLICANT : SHENZHEN DNS INDUSTRIES CO., LTD. DATE OF ISSUE : Jan. 29, 2026 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC05803260101FR01 Page 2 of 70 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jan. 29, 2026 Valid Initial Release Report No.: AGC05803260101FR01 Page 3 of 70 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 7 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 8 2.4 Test Methodology ...................................................................................................................................... 8 2.5 Special Accessories .................................................................................................................................. 8 2.6 Equipment Modifications ........................................................................................................................... 8 2.7 Antenna Requirement................................................................................................................................ 8 3. Test Environment ............................................................................................................................................ 9 3.1 Address of the Test Laboratory ................................................................................................................. 9 3.2 Test Facility ................................................................................................................................................ 9 3.3 Environmental Conditions ....................................................................................................................... 10 3.4 Measurement Uncertainty ....................................................................................................................... 10 3.5 List of Equipment Use ............................................................................................................................. 11 4.System Test Configuration ............................................................................................................................ 13 4.1 EUT Configuration ................................................................................................................................... 13 4.2 EUT Exercise ........................................................................................................................................... 13 4.3 Configuration of Tested System .............................................................................................................. 13 4.4 Equipment Used In Tested System ........................................................................................................ 13 4.5 Summary of Test Results ........................................................................................................................ 14 5. Description of Test Modes ........................................................................................................................... 15 6. Duty Cycle Measurement ............................................................................................................................. 16 7. RF Output Power Measurement .................................................................................................................. 17 7.1 Provisions Applicable .............................................................................................................................. 17 7.2 Measurement Procedure ......................................................................................................................... 17 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 17 7.4 Measurement Result ............................................................................................................................... 18 8. 6dB Bandwidth Measurement ...................................................................................................................... 22 8.1 Provisions Applicable .............................................................................................................................. 22 8.2 Measurement Procedure ......................................................................................................................... 22 8.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 22 8.4 Measurement Results ............................................................................................................................. 23 9. Power Spectral Density Measurement ........................................................................................................ 30 9.1 Provisions Applicable .....................................…

Text truncated - open the document above for the full version.

Report No.: AGC05803260101FR01 Page 68 of 70 12.3 Preliminary Procedure of Line Conducted Emission Test 1. The equipment was set up as per the tes…

Text truncated - open the document above for the full version.