ZC9001AYBA1Goflex Satellite

GoFlex Satellite™ User Guide Draft. Seagate Confidential. GoFlex Satellite™ User Guide © 2011 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, the Wave logo, and FreeAgent are trademarks or registered trademarks of Seagate Technology LLC, or one of its affiliates. All other trademarks or registered trademarks are the property of their respective owners. When referring to hard drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one thousand billion bytes when referring to hard drive capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Quantitative usage examples for various applications are for illustrative purposes. Actual quantities will vary based on various factors including file size, file format, features, and application software. Seagate reserves the right to change, without notice, product offerings or specifications. Seagate Technology LLC 920 Disc Drive Scotts Valley CA 95066 U.S.A. Draft. Seagate Confidential. GoFlex Satellite™ User Guideiii Regulatory Compliance FCC Class B Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. Note to US model owner: To comply with US FCC regulation, the country selection function has been completely removed from all US models. The above function is for non-US models only. Draft. Seagate Confidential. GoFlex Satellite™ User Guideiv Industry Canada This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. IMPORTANT NOTE: (For mobile device use) Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles) Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Draft. Seagate Confidential. GoFlex Satellite™ User Guide3 Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Getting to Know GoFlex Satellite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 GoFlex Media app at a Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 A Tour of the GoFlex Media app . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Security Features of GoFlex Satellite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2. Setting up the GoFlex Satellite™ Device . . . . . . . . . . . . . . . . . . . . 11 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Step 1: Connecting GoFlex Satellite™ to Your Computer . . . . . . . . . . . . . 12 Step 2: Installing the GoFlex Media app . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Step 3: …

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

ARTWORK, LABEL, GOFLEX SATELLITE, 49.6 MM x 17.6 MM 4/26/2011Add model number for IC requirement.DECR0134990 D0000310279D 1 of 1 REVCHG NODESCRIPTIONDATE SEAGATE CONFIDENTIAL DRAWING NUMBER REV SHEET TITLE DRAWN K. BROSE DETAIL A Actual Size NOTES: 1. Cyan keyline DOES NOT print. 2. DETAIL A -- Information within dashed line printed at packout. 3. Print country of origin 'Product of ' followed by full country name, followed by '(HDD)'. Also print full country name for the 'Assembled in ' text. Font is Helvetica Neue Light Condensed, 4.5pt minimum. 4. Unless otherwise specified, all images shown at 200%. 5. Barcode symbology code 39, height 1.5mm minimum. 6. Print capacity as GB or TB. Capacities less than 1 TB will be printed as XXX GB. 7. Background color is Process Black. All text and logo color is Pantone Cool Grey 4 or nearest equivalent. P/N: XXXXXX-XXX XXX GB S/N: XXXXXXXX Satellite GoFlex IC: 9580A-1AYBA1 FCC ID: ZC9001AYBA1 MAC: 000000000000 Model: 1AYBA1 Satellite GoFlex IC: 9580A-1AYBA1 FCC ID: ZC9001AYBA1 MAC: Model: 1AYBA1 P/N: XXXXXX-XXX XXX GB S/N: XXXXXXXX Satellite GoFlex IC: 9580A-1AYBA1 FCC ID: ZC9001AYBA1 MAC: 000000000000 Model: 1AYBA1

E 123 D E CHENG UEI PRECISION INDUSTRY CO.,LTD 4567 SEE NOTES MAT'L.: CHKD.: DR.: APPD.: UNIT: mm SCALE: DWG. NO.: INTENDED USE: TITLE: 8 REV.: PAGE: D C B A 123 C B 4567 A 8 ECN. NO. REV. REDACTOR REVISIONS RECORD ZONEDESCRIPTION DATE A3 0.0° 0.0° 1.50 50.03 49.60 5.00 19.74 96.15 18.03 19.52 CE LABEL POSITION 1:1 1/1 = CRITICAL DIM = TOOLING DIM = PROCESS DIM (Cpk) TOLERANCE UNLESS OTHERWISE SPECIFIED (± ) < 3mm 0.05 3 ~ 15mm 0.08 15 ~ 30mm 0.1 30 ~ 70mm 0.15 70 ~ 120mm 0.2 > 120mm 0.3 ANGLE 1.0 XX = DIMENSION ID Drawing name : ME_SATELLITEW_CE_LABEL / Model name : SATELLITE Alan Lee Kenny Lee Nita Chen VO2 CE LABEL POSITION V02 ADD FCC/CE declares label 20110502 Nita Chen CE LABEL FCC/IC declares labels

Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22

Report No.: SA110310D05-2 1 Report Format Version 4.0.0 SAR TEST REPORT REPORT NO.: SA110310D05-2 MODEL NO.: 1AYBA1 FCC ID: ZC9001AYBA1 RECEIVED: Mar. 10, 2011 TESTED: May 06, 2011 ISSUED: May 10, 2011 APPLICANT: Seagate Technology LLC ADDRESS: 920 Disk Dr. Scotts Valley, CA 95066 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 26 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: SA110310D05-2 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.............................................................................................. 3 1. CERTIFICATION .............................................................................................................. 4 2. GENERAL INFORMATION .............................................................................................. 5 2.1 GENERAL DESCRIPTION OF EUT ................................................................................ 5 2.2 GENERAL DESCRIPTION OF APPLIED STANDARDS.................................................. 6 2.3 GENERAL INOFRMATION OF THE SAR SYSTEM ........................................................ 7 2.4 TEST EQUIPMENT........................................................................................................ 10 2.5 GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION ......................11 2.6 DESCRIPTION OF SUPPORT UNITS........................................................................... 14 3. DESCRIPTION OF ANTENNA LOCATION.................................................................... 15 4. RECIPES FOR TISSUE SIMULATING LIQUIDS........................................................... 16 5. SYSTEM VALIDATION................................................................................................... 19 5.1 TEST PROCEDURE ...................................................................................................... 19 5.2 VALIDATION RESULTS ................................................................................................. 20 5.3 SYSTEM VALIDATION UNCERTAINTIES ..................................................................... 21 6. TEST RESULTS............................................................................................................. 22 6.1 TEST PROCEDURES.................................................................................................... 22 6.2 CONDUCTED POWER.................................................................................................. 23 6.3 DESCRIPTION OF TEST CONDITION ......................................................................... 23 6.4 MEASURED SAR RESULT ........................................................................................... 23 6.5 POWER DRIFT TABLE .................................................................................................. 24 6.6 SAR LIMITS ................................................................................................................... 25 7. INFORMATION ON THE TESTING LABORATORIES................................................... 26 APPENDIX A: TEST CONFIGURATIONS AND TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION Report No.: SA110310D05-2 3 Report Format Version 4.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release N/A May 10, 2011 Report No.: SA110310D05-2 4 Report Format Version 4.0.0 1. CERTIFICATION PRODUCT: GoFlex Satellite MODEL: 1AYBA1 BRAND: Seagate Technology LLC APPLICANT: Seagate Technology LLC TESTED: May 06, 2011 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) RSS-102 Issue 4 (2010-03) The above equipment (model: 1AYBA1) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found complianc e with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate account s of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :May 10, 2011 Pettie Chen / Specialist APPROVED BY : , DATE :May 10, 2011 Gary Chang / Assistant Manager Report No.: SA110310D05-2 5 Report Format Version 4.0.0 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT EUT Goflex Satellite MODEL NO. 1AYBA1 FCC ID ZC9001AYBA1 POWER SUPPLY 3.7Vdc from Battery 5.0Vdc from host equipment / AC adapter / car charger MODULATION TYPE CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM MODULATION TECHNOLOGY DSSS, OFDM TRANSFER RATE 802.11b:11.0/ 5.5/ 2.0/ 1.0Mbps 802.11g: 54.0/ 48.0/ 36.0/ 24.0/ 18.0/ 12.0/ 9.0/ 6.0Mbps 802.11n: up to 150.0Mbps OPERATING FREQUENCY 2412 ~ 2462MHz NUMBER OF CHANNEL 11 MAXIMUM SAR (1g) 0.171W/kg ANTENNA TYPE PIFA Antenna with 3.23dBi gain ANTENNA CONNECTOR U.FL connecter DATA CABLE Shielded USB 3.0 cable (0.47m) Non-shielded USB to DC cable (1.0m) I/O PORTS Refer to user’ manual ACCESSORY DEVICES Refer to note below NOTE: 1. The EUT is an external HDD with built-in a WLAN IEEE802.11b/g/n module. 2. The EUT has two samples for Combination of PCB difference as follows: Combination of PCB ‹ P1-AVL1 ‹ P2-AVL2 Remark: Above two combinations have the same layout, but the differentiation between P1 & P2 is th…

Text truncated - open the document above for the full version.

Report No.: RF110310D05 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO.: RF110310D05 MODEL NO.: 1AYBA1 FCC ID: ZC9001AYBA1 RECEIVED: Mar. 10, 2011 TESTED: Mar. 28 ~ Apr. 1, 2011 ISSUED: May 3, 2011 APPLICANT: Seagate Technology LLC ADDRESS: 920 Disk Dr. Scotts Valley, CA 95066 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan This test report consists of 67 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110310D05 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.................................................................................4 1. CERTIFICATION..............................................................................................5 2. SUMMARY OF TEST RESULTS......................................................................6 2.1 MEASUREMENT UNCERTAINTY...................................................................6 3. GENERAL INFORMATION..............................................................................7 3.1 GENERAL DESCRIPTION OF EUT.................................................................7 3.2 DESCRIPTION OF TEST MODES...................................................................9 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST............................................10 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL..................11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS................................14 3.4 DESCRIPTION OF SUPPORT UNITS...........................................................14 4. TEST TYPES AND RESULTS........................................................................15 4.1 CONDUCTED EMISSION MEASUREMENT.................................................15 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT...............................15 4.1.2 TEST INSTRUMENTS...................................................................................15 4.1.3 TEST PROCEDURES....................................................................................16 4.1.4 DEVIATION FROM TEST STANDARD..........................................................16 4.1.5 TEST SETUP.................................................................................................17 4.1.6 EUT OPERATING CONDITIONS...................................................................17 4.1.7 TEST RESULTS.............................................................................................18 4.2 RADIATED EMISSION MEASUREMENT......................................................22 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT....................................22 4.2.2 TEST INSTRUMENTS...................................................................................23 4.2.3 TEST PROCEDURES....................................................................................24 4.2.4 DEVIATION FROM TEST STANDARD..........................................................24 4.2.5 TEST SETUP.................................................................................................25 4.2.6 EUT OPERATING CONDITIONS...................................................................25 4.2.7 TEST RESULTS.............................................................................................26 4.3 6DB BANDWIDTH MEASUREMENT.............................................................38 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT..........................................38 4.3.2 TEST INSTRUMENTS...................................................................................38 4.3.3 TEST PROCEDURE......................................................................................38 4.3.4 DEVIATION FROM TEST STANDARD..........................................................38 4.3.5 TEST SETUP.................................................................................................39 4.3.6 EUT OPERATING CONDITIONS...................................................................39 4.3.7 TEST RESULTS.............................................................................................40 4.4 MAXIMUM OUTPUT POWER........................................................................43 4.4.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT.........................43 4.4.2 INSTRUMENTS.............................................................................................43 4.4.3 TEST PROCEDURES....................................................................................43 4.4.4 DEVIATION FROM TEST STANDARD..........................................................44 4.4.5 TEST SETUP.................................................................................................44 4.4.6 EUT OPERATING CONDITIONS...................................................................44 Report No.: RF110310D05 3 Report Format Version 4.0.0 4.4.7 TEST RESULTS.............................................................................................45 4.5 POWER SPECTRAL DENSITY MEASUREMENT.........................................46 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT......................46 4.5.2 TEST INSTRUMENTS...................................................................................46 4.5.3 TEST PROCEDURE......................................................................................46 4.5.4 DEVIATION FROM TEST STANDARD..........................................................47 4.5.5 TEST SETUP.................................................................................................47 4.5.6 EUT OPERATING CONDITION...............…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (Mode A) 2 CONDUCTED EMISSION TEST (Mode B) 3 RADIATED EMISSION TEST (Mode A) 4 RADIATED EMISSION TEST (Mode B) 5 RADIATED EMISSION TEST (Mode C)

1 PHOTOGRAPHS OF THE TEST CONFIGURATION (SAR Test Set Up Photos) Tip 10mm Front 10mm Bottom 10mm Left edge 10mm Test Set Up