ZCASMA065FMulti-band GSM/WCDMA/LTE Phone with Bluetooth,WLAN

47 CFR §2.903 and §2.911 (d)(5) Attestation Date: 2024-06-27 FCC ID: ZCASMA065F To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1. Samsung Electronics Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Samsung Electronics Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Ms. Jenni Chun Job Title: Head of Regulatory & Environmental Affairs Company Name: Samsung Electronics Co., Ltd.

47 CFR §2.911 (d)(7) Agent Designation Attestation Date: 2024-06-27 FCC ID: ZCASMA065F To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Samsung Electronics Co., Ltd. (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: Contact Person : Ms. Jenni Chun Company Name : Samsung Electronics America, Inc. Company Address : 19 Chapin Rd., Building D, Pine Brook, NJ 07058 Email : [email protected] Grantee Code: ZCA FRN #: 0027908797 Telephone No: 1-973-808-6375 Sincerely yours, Name: Ms. Jenni Chun Job Title: Head of Regulatory & Environmental Affairs Company Name: Samsung Electronics Co., Ltd.

Samsung Electronics Co., Ltd. 19 Chapin Rd.,Building D Pine Brook, NJ 07058 Tel: +1-201-937-4203 Authority to Act as Agent Date: __0402,2024_____ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: ______(CTTL,Telecommunica tion Technology Labs,CAICT)_ _____ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b) , to the application is subject t o denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____12 months_____ By: ____________ _____Jenni Chun_________ (Signature 1 ) (Print name) Title: ______General Manag er ________ On behalf of: __Samsung Electronics Co., Ltd. ___ (Company Name) Telephone: ___973-808-6375____ 022818 – 11 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. Samsung Electronics Co., Ltd. 19 Chapin Rd.,Building D Pine Brook, NJ 07058 Tel: +1-201-937-4203 Request for Confidentiality Date: _0428,2023__ Subject: Confidentiality Request for: ____ZCASMA065F____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐Short Term☒Permanent Block Diagrams ☒Short Term External Photos ☒Short Term☐Permanent * 2 Internal Photos ☐Short Term☒Permanent Operation Description/Theory of Operation ☐Short Term☒Permanent Parts List & Placement/BOM ☐Short Term☒Permanent Tune-Up Procedure ☐Short Term☒Permanent Schematics ☒Short Term Test Setup Photos ☒Short Term☐Permanent * 3 User’s Manual _____SAMSUNG Electronics______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __180___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: regarding specific information that must accompany these requests. 022818 – 11 Samsung Electronics Co., Ltd. 19 Chapin Rd.,Building D Pine Brook, NJ 07058 Tel: +1-201-937-4203 IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: ______ /General Manager______ ___Jenni Chun____ (Signature/Title 3 ) (Print name) 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 – 11

No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 1 of 89 ANNEX A Graph Results No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 2 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 3 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 4 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 5 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 6 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 7 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 8 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 9 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 10 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 11 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 12 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 13 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 14 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 15 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 16 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 17 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 18 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 19 of 89 ANNEX B System Verification Results 835 MHz Date: 2024/6/3 Electronics: DAE4 Sn777 Medium: H700-6000M Medium parameters used: f = 835 MHz; σ =0.9362 mho/m; εr = 41.31; ρ = 1000 kg/m3 Ambient Temperature: 22.5oC Liquid Temperature: 22.3oC Communication System: CW Frequency: 835 MHz Duty Cycle: 1:1 Probe: EX3DV4 –SN3617 ConvF(9.91, 9.91, 9.91) System Validation /Area Scan (81x191x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.4 W/kg System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value =57.74 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 3.71 W/kg SAR(1 g) = 2.64 W/kg; SAR(10 g) = 1.49 W/kg Maximum value of SAR (measured) = 3.32 W/kg 0 dB = 3.32 W/kg = 5.21 dB W/kg No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 20 of 89 2450 MHz Date: 2024/6/9 Electronics: DAE4 Sn777 Medium: H700-6000M Medium parameters used: f = 2450 MHz; σ =1.897mho/m; εr = 39.89; ρ = 1000 kg/m3 Ambient Temperature: 22.5oC Liquid Temperature: 22.3oC Communication System: CW Frequency: 2450 MHz Duty Cycle: 1:1 Probe: EX3DV4 –SN3617 ConvF(7.37, 7.37, 7.37) System Validation /Area Scan (81x191x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 22.4 W/kg System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value =109.7 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 28.5 W/kg SAR(1 g) = 13.07 W/kg; SAR(10 g) = 6.63 W/kg Maximum value of SAR (measured) = 22.8 W/kg 0 dB = 22.8 W/kg = 13.58 dBW/kg No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 21 of 89 2600 MHz Date: 2024/6/11 Electronics: DAE4 Sn777 Medium: H700-6000M Medium parameters used: f = 2600 MHz; σ =2.016 mho/m; εr = 39.63; ρ = 1000 kg/m3 Ambient Temperature: 22.5oC Liquid Temperature: 22.3oC Communication System: CW Frequency: 2600 MHz Duty Cycle: 1:1 Probe: EX3DV4 –SN3617 ConvF(7.17, 7.17, 7.17) System Validation /Area Scan (61x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 24.8 W/kg System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value =110.5 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 30.8 W/kg SAR(1 g) = 13.94 W/kg; SAR(10 g) = 6.74 W/kg Maximum value of SAR (measured) = 23.4 W/kg 0 dB = 23.4 W/kg = 13.69 dBW/kg No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 22 of 89 5250 MHz Date: 2024/6/18 Electronics: DAE4 Sn777 Medium: H700-6000M Medium parameters used: f = 5250 MHz; σ =4.602 S/m; εr = 34.73; ρ = 1000 kg/m3 Ambient Temperature: 22.5oC Liquid Temperature: 22.3oC Communication System: CW Frequency: 5250 MHz Duty Cycle: 1:1 Probe: EX3DV4 –SN3617 ConvF(5.47, 5.47, 5.47) System Validation /Area Scan (91x191x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 17.7 W/kg System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value =71.26 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 27.52 W/kg SAR(1 g) = 7.91 W/kg; SAR(10 g) = 2.33 W/kg Maximum value of SAR (measured) = 17.6 W/kg 0 dB = 17.6 W/kg = 12.46 dBW/kg No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 23 of 89 5600 MHz Date: 2024/6/18 Electronics: DAE4 Sn777 Medium: H700-6000M Medium parameters used: f = 5600 MHz; σ =4.974 S/m; εr = 34.25; ρ = 1000 kg/m3 Ambient Temperature: 22.5oC Liquid Temperature: 22.3oC Communication System: CW Frequency: 5600 MHz Duty Cycle: 1:1 Probe: EX3DV4 –SN3617 ConvF(4.91, 4.91, 4.91) System Validation /Area Scan (81x191x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 21.06 W/kg System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value =78.21 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 31.17 W/kg SAR(1 g) = 8.21 W/kg; SAR(10 g) = 2.34 W/kg Maximum value of SAR (measured) = 20.37 W/kg 0 dB = 20.37 W/kg = 13.09 dB W/kg No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 24 of 89 5750 MHz Date: 2024/6/18 Electronics: DAE4 Sn777 Medium: H700-6000M Medium parameters used: f = 5750 MHz; σ =5.195 S/m; εr = 33.95; ρ = 1000 kg/m3 Ambient Temperature: 22.5oC Liquid Temperature: 22.3oC Communication System: CW Frequency: 5750 MHz Duty Cycle: 1:1 Probe: EX3DV4 –SN3617 ConvF(5.06, 5.06, 5.06) System Validation /Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.7 W/kg System Validation /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4m…

Text truncated - open the document above for the full version.

No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 43 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 44 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 45 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 46 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 47 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 48 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 49 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 50 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 51 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 52 of 89

No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 53 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 54 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 55 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 56 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 57 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 58 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 59 of 89 ANNEX H Dipole Calibration Certificate 835 MHz Dipole Calibration Certificate No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 60 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 61 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 62 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 63 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 64 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 65 of 89 2450 MHz Dipole Calibration Certificate No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 66 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 67 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 68 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 69 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 70 of 89

No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 71 of 89 2600 MHz Dipole Calibration Certificate No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 72 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 73 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 74 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 75 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 76 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 77 of 89 5GHz Dipole Calibration Certificate No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 78 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 79 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 80 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 81 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 82 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 83 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 84 of 89 No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 85 of 89 ANNEX I SAR Sensor Triggering Data Summary ANT P-Sensor Detect Near Far Main ANT (ANT2) Rear <=16mm >16mm Left <=13mm >13mm top <=16mm >16mm front <=12mm >12mm WIFI ANT (ANT3/4) front <=8mm >8mm Rear <=13mm >13mm Top <=13mm >13mm Per FCC KDB Publication 616217 D04v01r02, this device was tested by the manufacturer to determine the proximity sensor triggering distances for some positions. The measured output power within ±5mm of the triggering points (or until touching the phantom) is included for front, rear and each applicable edge. To ensure all production units are compliant it is necessary to test SAR at a distance 1mm less than the smallest distance from the device and SAR phantom (determined from these triggering tests according to the KDB 616217 D04v01r02) with the device at maximum output power without power reduction. These SAR tests are included in addition to the SAR tests for the device touching the SAR phantom, with reduced power. ANT2-Rear/Top Moving device toward the phantom: sensor near or far(KDB 616217 6.2.6) Distance [mm] 21 20 19 18 17 16 15 14 13 12 11 Main antenna Far Far Far Far Far Near Near Near Near Near Near Moving device away from the phantom: sensor near or far(KDB 616217 6.2.6) Distance [mm] 11 12 13 14 15 16 17 18 19 20 21 Main antenna Near Near Near Near Near Near Far Far Far Far Far ANT2-Left Moving device toward the phantom: sensor near or far(KDB 616217 6.2.6) Distance [mm] 19 18 17 16 15 14 13 12 11 10 9 Main antenna Far Far Far Far Far Far Near Near Near Near Near Moving device away from the phantom: sensor near or far(KDB 616217 6.2.6) Distance [mm] 9 10 11 12 13 14 15 16 17 18 19 Main antenna Near Near Near Near Near Far Far Far Far Far Far No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 86 of 89 ANT3/4-Top/Rear Moving device toward the phantom: sensor near or far(KDB 616217 6.2.6) Distance [mm] 19 18 17 16 15 14 13 12 11 10 9 Main antenna Far Far Far Far Far Far Near Near Near Near Near Moving device away from the phantom: sensor near or far(KDB 616217 6.2.6) Distance [mm] 9 10 11 12 13 14 15 16 17 18 19 Main antenna Near Near Near Near Near Far Far Far Far Far Far ANT2-Front Moving device toward the phantom: sensor near or far(KDB 616217 6.2.6) Distance [mm] 17 16 15 14 13 12 11 10 9 8 7 Main antenna Far Far Far Far Far Near Near Near Near Near Near Moving device away from the phantom: sensor near or far(KDB 616217 6.2.6) Distance [mm] 7 8 9 10 11 12 13 14 15 16 17 Main antenna Near Near Near Near Near Near Far Far Far Far Far ANT3/4-Front Moving device toward the phantom: sensor near or far(KDB 616217 6.2.6) Distance [mm] 13 12 11 10 9 8 7 6 5 4 3 Main antenna Far Far Far Far Far Near Near Near Near Near Near Moving device away from the phantom: sensor near or far(KDB 616217 6.2.6) Distance [mm] 3 4 5 6 7 8 9 10 11 12 13 Main antenna Near Near Near Near Near Near Far Far Far Far Far Per FCC KDB Publication 616217 D04v01r02, the influence of table tilt angles to proximity sensor triggering is determined by positioning each edge that contains a transmitting antenna, perpendicular to the flat phantom, at the smallest sensor triggering test distance by rotating the device around the edge next to the phantom in ≤ 10° increments until the tablet is ±45° or more from the vertical position at 0°. No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 87 of 89 The front/rear evaluation The top/bottom edge evaluation No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 88 of 89 The right edge evaluation Based on the above evaluation, we come to the conclusion that the sensor triggering is not released and normal maximum output power is not restored within the ±45°range at the smallest sensor triggering test distance declared by manufacturer. No.23T04Z80421-47 ©Copyright. All rights reserved by CTTL. Page 89 of 89 ANNEX J Accreditation Certificate

©Copyright. All rights reserved by CTTL. SAR TEST REPORT No. 24T04Z200128-011 For Samsung Electronics Co., Ltd. Multi-band GSM/WCDMA/LTE Mobile Phone with Bluetooth, WLAN Model Name: SM-A065F/DS FCC ID: ZCASMA065F with Hardware Version: REV1.0 Software Version: A065F.001 Issued Date: 2024-6-25 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: CTTL-Telecommunication Technology Labs, CAICT No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512, Fax:+86(0)10-62304633-2504 Email: [email protected], website: www.caict.ac.cn No.24T04Z200128-011 ©Copyright. All rights reserved by CTTL. Page 2 of 67 REPORT HISTORY Report Number Revision Issue Date Description 24T04Z200128-011 Rev.0 2024-6-25 Initial creation of test report No.24T04Z200128-011 ©Copyright. All rights reserved by CTTL. Page 3 of 67 TABLE OF CONTENT 1 TEST LABORATORY ................................................................................................................ 5 1.1 INTRODUCTION & ACCREDITATION ................................................................................................................ 5 1.2 TESTING LOCATION ........................................................................................................................................ 5 1.3 TESTING ENVIRONMENT ................................................................................................................................. 5 1.4 PROJECT DATA ................................................................................................................................................ 5 1.5 SIGNATURE ..................................................................................................................................................... 5 2 STATEMENT OF COMPLIANCE .................................................................................................. 6 3 CLIENT INFORMATION ................................................................................................................ 7 3.1 APPLICANT INFORMATION .............................................................................................................................. 7 3.2 MANUFACTURER INFORMATION ..................................................................................................................... 7 4 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ................................. 8 4.1 ABOUT EUT ................................................................................................................................................... 8 4.2 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .......................................................................... 8 4.3 INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ............................................................................ 8 5 TEST METHODOLOGY ................................................................................................................ 9 5.1 APPLICABLE LIMIT REGULATIONS .................................................................................................................. 9 5.2 APPLICABLE MEASUREMENT STANDARDS ...................................................................................................... 9 6 SPECIFIC ABSORPTION RATE (SAR) ...................................................................................... 10 6.1 INTRODUCTION ............................................................................................................................................. 10 6.2 SAR DEFINITION .......................................................................................................................................... 10 7 TISSUE SIMULATING LIQUIDS ................................................................................................. 11 7.1 TARGETS FOR TISSUE SIMULATING LIQUID .................................................................................................... 11 7.2 DIELECTRIC PERFORMANCE ......................................................................................................................... 11 8 SYSTEM VERIFICATION ............................................................................................................ 13 8.1 SYSTEM SETUP ............................................................................................................................................. 13 8.2 SYSTEM VERIFICATION ................................................................................................................................. 14 9 MEASUREMENT PROCEDURES .............................................................................................. 15 9.1 TESTS TO BE PERFORMED ............................................................................................................................. 15 9.2 GENERAL MEASUREMENT PROCEDURE ........................................................................................................ 17 9.3 WCDMA MEASUREMENT PROCEDURES FOR SAR ...................................................................................... 18 9.4 SAR MEASUREMENT FOR LTE ..................................................................................................................... 19 9.5 BLUETOOTH & WI-FI MEASUREMENT PROCEDURES FOR SAR .................................................................... 21 9.6 POWER DRIFT ............................................................................................................................................... 21 10 AREA SCAN BASED 1-G SAR ................................................................................................. 22 10.1 REQUIREMENT OF KDB ..................................................................…

Text truncated - open the document above for the full version.

©Copyright. All rights reserved by CTTL. FCC PART 15C TEST REPORT No. 24T04Z200128-009 for Samsung Electronics Co., Ltd. Multi-band GSM/WCDMA/LTE Mobile Phone with Bluetooth, WLAN Model Name: SM-A065F/DS FCC ID: ZCASMA065F with Hardware Version: REV1.0 Software Version: A065F.001 Issued Date: 2024-6-24 Note: The test results in this test report relate only to the devices specified in this report.This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: CTTL, Telecommunication Technology Labs, CAICT No.52, HuayuanNorth Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512,Fax:+86(0)10-62304633-2504 Email:[email protected], website: www.chinattl.com No. 24T04Z200128-009 ©Copyright. All rights reserved by CTTL. Page 2 of 92. REPORT HISTORY Report Number Revision Description Issue Date 24T04Z200128-009 Rev.0 1 st edition 2024-6-24 Note: the latest revision of the test report supersedes all previous version. No. 24T04Z200128-009 ©Copyright. All rights reserved by CTTL. Page 3 of 92. CONTENTS 1. Test Laboratory ....................................................................................................................................... 5 1.1. Introduction &Accreditation ....................................................................................................... 5 1.2. Testing Location .......................................................................................................................... 5 1.3. Testing Environment ................................................................................................................... 6 1.4. Project data.................................................................................................................................. 6 1.5. Signature ..................................................................................................................................... 6 2. Client Information ................................................................................................................................... 7 2.1. Applicant Information ................................................................................................................. 7 2.2. Manufacturer Information ........................................................................................................... 7 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) ............................................................... 8 3.1. About EUT .................................................................................................................................. 8 3.2. Internal Identification of EUT ..................................................................................................... 8 3.3. Internal Identification of AE ....................................................................................................... 8 3.4. Normal Accessory setting ........................................................................................................... 9 3.5. General Description .................................................................................................................... 9 4. Reference Documents ........................................................................................................................... 10 4.1. Documents supplied by applicant ............................................................................................. 10 4.2. Reference Documents for testing .............................................................................................. 10 5. Test Results ............................................................................................................................................11 5.1. Summary of Test Results ...........................................................................................................11 5.2. Statements ..................................................................................................................................11 6. Test Facilities Utilized .......................................................................................................................... 12 7. Measurement Uncertainty ..................................................................................................................... 13 7.1. Pe…

Text truncated - open the document above for the full version.