ZFQMTJP-T01-14Timing measurement system for sports event

J Chip System J Chip TAG Operation Manual Model No. MTJP-T01 Micro Talk Systems Corp. Thank you very much for your purchasing J Chip Tag of J Chip System. Please read this Operation Manual and Warranty Certificate carefully before using to use this product correctly. Especially please read <Remarks for safety> very carefully without fail before using to use this product safely. Please also confirm <Date of purchasing and name of distributor> and then obtain the Certificate from the distributor. Serial No. is important from standpoint of ensuring safety. Please ensure Serial No. of the products together with the product itself when you purchase the equipment. INDEX Remarks for safety...........................................................34 To fix the tag....................................................................5 Specifications...................................................................5 FCC ID..............................................................................6 Please keep the following remarks for safety without fail We classify the following indications and explain the level of damage and loss to be occurred due to misuse based on ignorance of indications. This indicates the possibility of producing serious damage if you ignore this indication and misuse the equipment. This indicates the possibility of producing serious damage or loss if you ignore this indication and misuse the equipment. We classify the following picture indications to be obeyed for explanation: (The following picture indications are examples.) This picture indication shows <Remark> to which we like you to pay your special attention. This picture indication shows <Prohibition> which we like you to prohibit. This picture indication shows <Instruction> which we like you to perform without fail. It might cause damage of case and cause trouble. Please refrain from dismantling or/and altering the product. No dismantling. No wet hand(s). Please refrain from putting the product into Tag slot of Tag Charger with wet hand(s). It might cause an electric shock. To prevent the users and others from injury, damage and loss, we explain the following remarks to be obeyed without fail. Please fix the product to the correct place, as this product and Reader Antenna have a right electro- magnetic direction. Please refrain from dropping the product from high place. It might cause a trouble, as it is precision equipment. Please refrain from using the product up to the time when built-in battery runs out completely. Life span of battery might be reduced remarkably in case you use the product up to the time when built-in battery becomes empty. Please refrain from putting the product in water or fixing it in place which receives water. It might cause trouble. WARNINGREMARKS WARNING REMARKS Please keep the following remarks for safety without fail When you fix the product, Please keep the following remarks. Please pay your attention to right electro-magnetic direction between this product and Reader Antenna for fixing the product. Please refrain from putting this product place which is subjected vibration or shocks. It might cause trouble, as vibration and shock might damage the internal parts of the product. Please fix the product to the place which is durable for the weight of the product. When you use the equipment, Please check with present position of built-in battery before using to ensure that it is usable. When you maintain the equipment, Please wipe the J Chip Tag by soft and dry cloth. In case it is very dirty, please dip the cloth into thinned kitchen detergent and wring it out well then clean it carefully. In case you use a chemical duster, please note the remarks of the product. To fix the Tag (Please pay your special attention to the right electro-magnetic direction.) You can fix the Tag to chest of each athlete. You can fix the Tag to the back of Bib number by plastic tape which is wider than the width of the Tag. When you fix the Tag, please pay your special attention to the right electro-magnetic direction between the Tag and Reader Antenna. Direction of Tag to be fixed. Please fix the Tag directed to the right position as follows: You can fix the Tag to the place where is up to about 1.5m---1.8m high above from Trigger Antenna. When you fix the Tag, please check with Receiver before using to ensure that it can be firmly measured Specifications Right direction to electro-magnetic zone Transmitting Frequency 300MhzBand3 (to be fixed by ID) Weight About 9.5g Outer dimension W 44D28H7.7 ID Indication method Seal as drawing of out side view above is attached to each Tag mentioning 1 character for the user, 6 Serial numbers indicated by 16 notation. FCC ID FCC ID: ZFQMTJP-T01-04 FCC ID: ZFQMTJP-T01-09 FCC ID: ZFQMTJP-T01-14 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USER‘S AUTHORITY TO OPERATE THE EQUIPMENT.

Declaration of Authorization We Name:Micro Talk Systems Corp． Address:8F Shimizu Bldg,Kanda Iwamoto-cho,Chiyoda-Ku City:Tokyo Country:Japan Declare that: Name:RF Technologies Ltd. Address:472, Nippa-cho, Kohoku-ku, City:Yokohama, 223-0057 Country:Japan is authorized to apply for Certification of the following product(s): Product description: Timng measurement system for sports event. Type designation:MTJP-T01-04, MTJP-T01-09, MTJP-T01-14 Trademark:J-Chip Pro Tag on our behalf. Date:4/11/2011 City:Tokyo Name:Shigeo Kitamura Signature:

FCC, Request for non-disclosureDate: 18-04-2011 RF_501, Issue 3Page 1 of 1 Micro Talk Systems Corp． 8F Shimizu Bldg,Kanda Iwamoto-cho,Chiyoda-Ku Tokyo,Japan To:Telefication B.V. Attn: Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject:Request for confidentiality FCC ID:ZFQMTJP-T01-04, FCC ID:ZFQMTJP-T01-09, FCC ID:ZFQMTJP-T01-14 Reference number:MTJP-T01-04, MTJP-T01-09, MTJP-T01-14 Dear FCC TCB, Persuant to 47 CFR Section 0.459(a) & (b),Micro Talk Systems Corp．hereby requests non- disclosure and confidential treatment of the following materials submitted in support of FCC certification application for FCC ID: ZFQMTJP-T01-04,ZFQMTJP-T01-09,ZFQMTJP-T01-14 Block Diagrams Operational Description Schematic Diagrams Above materials contain secrets, proprietary and technical information, which would customarily be quarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. Micro Talk Systems Corp.understands that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Micro Talk Systems Corp． <Date>18/04/2011 <City>Tokyo <Name and signature of applicant>

4/18/2011 FCC ID:ZFQMTJP-T01-04,09,14 Front View Phote Measure:mm

28mm 6mm 28mm 6mm 28mm 6mm 4/15/2011 FCC ID:ZFQMTJP-T01-14 Label Design LabelLocation&BackView

4/18/2011 FCC ID:ZFQMTJP-T01-04,09,14Internal Phote Front Measuer:mm Back Measuer:mm

Issue Date: 19 April, 2011 Report No.: RY1104J19R1 Model: MTJP-T01-04/-09/-14 RF Technologies Ltd. Page 1 of 21 472, Nippa-cho, Kohoku-ku, Yokohama, 223-0057, Japan Telephone: +81+(0)45- 534-0645, FAX: +81+(0)45- 534-0646, Web: http://www.rft.jp RFT TEST REPORT For Timing measurement system for sports event In conformity with FCC CFR 47 Part15C Model: MTJP-T01-04 (304.22 MHz) MTJP-T01-09 (309.92 MHz) MTJP-T01-14 (314.28 MHz) FCC ID: ZFQMTJP-T01-04 (304.22 MHz) ZFQMTJP-T01-09 (309.92 MHz) ZFQMTJP-T01-14 (314.28 MHz) Test Item: Timing measurement system for sports event Report No: RY1104J19R1 Issue Date: 19 April, 2011 This report shall not be reproduced, except in full, without the written permission of RF Technologies Ltd. The test results in this report apply only to the sample tested. RF Technologies Ltd. is managed to ISO17025 and has the necessary knowledge and test facilities for testing according to the referenced standards. Prepared for Micro Talk Systems Corp. 8F Shimizu Bldg., 1-5, Kanda Iwamoto-cho, Chiyoda-ku, Tokyo, 101-0033 Japan Prepared by RF Technologies Ltd. 472, Nippa-cho, Kohoku-ku, Yokohama, 223-0057, Japan Telephone: +81+(0)45- 534-0645 FAX: +81+(0)45- 534-0646 Issue Date: 19 April, 2011 Report No.: RY1104J19R1 Model: MTJP-T01-04/-09/-14 RF Technologies Ltd. Page 2 of 21 472, Nippa-cho, Kohoku-ku, Yokohama, 223-0057, Japan Telephone: +81+(0)45- 534-0645, FAX: +81+(0)45- 534-0646, Web: http://www.rft.jp RFT Table of contents 1 General information ...................................................................................................................... 3 1.1 Product description ................................................................................................................................................ 3 1.2 Test(s) performed/ Summary of test result ............................................................................................................ 3 1.3 Test facility ............................................................................................................................................................ 4 1.4 Measurement uncertainty ....................................................................................................................................... 4 1.5 Summary of test results .......................................................................................................................................... 5 1.5.1 Table of test summary .................................................................................................................................... 5 1.6 Setup of equipment under test (EUT) .................................................................................................................... 5 1.6.1 Test configuration of EUT ............................................................................................................................. 5 1.6.2 Operating condition: ...................................................................................................................................... 5 1.6.3 Setup diagram of tested system:..................................................................................................................... 5 1.7 Equipment modifications ....................................................................................................................................... 6 1.8 Deviation from the standard .................................................................................................................................. 6 2 Test procedure and test data ........................................................................................................ 7 2.1 Occupied Bandwidth (20 dB / 99%) ...................................................................................................................... 7 2.2 Filed Strength Fundamental Emissions.................................................................................................................. 9 2.3 Transmitter Radiated spurious emissions ............................................................................................................ 11 2.3.1 Between 30 – 1000 MHz ............................................................................................................................. 14 2.3.2 Above 1000 MHz ......................................................................................................................................... 17 3 Test setup photographs ............................................................................................................... 18 3.1 Definition of the EUT axis and EUT style ........................................................................................................... 18 3.2 Radiated spurious emissions ................................................................................................................................ 20 4 List of utilized test equipment/ calibration ............................................................................... 21 History Report No. Date Revisions Issued By RY1104J19R1 19 April, 2011 Initial Issue R. Kojima Issue Date: 19 April, 2011 Report No.: RY1104J19R1 Model: MTJP-T01-04/-09/-14 RF Technologies Ltd. Page 4 of 21 472, Nippa-cho, Kohoku-ku, Yokohama, 223-0057, Japan Telephone: +81+(0)45- 534-0645, FAX: +81+(0)45- 534-0646, Web: http://www.rft.jp RFT 1.3 Test facility The Federal Communications Commission has reviewed the technical characteristics of the test facilities at RF Technologies Ltd., located in 472, Nippa-cho, Kohoku-ku, Yokohama, 223-0057, Japan, and has found these test facilities to be in compliance with the requirements of 47 CFR Part 15, section 2.948, per October 1, 2009. The description of the test facilities has been filed under registration number 319924 at the Office of the Federal Communications Commission. The facility has been added to the list of laboratories perform…

Text truncated - open the document above for the full version.

Date: 26 April, 2011 Model: MTJP-T01-04/-09/-14 RF Technologies Ltd. Page 1 of 1 472, Nippa-cho, Kohoku-ku, Yokohama, 223-0057, Japan Telephone: +81+(0)45- 534-0645, FAX: +81+(0)45- 534-0646, Web: http://www.rft.jp RFT Transmission Timing chart MTJP-T01-04 (304.28MHz) MTJP-T01-09 (309.92MHz) MTJP-T01-14 (314.28MHz) * A Att 10 dBRef 107 dBμV RBW 100 kHz VBW 300 kHz Center 314.28 MHz500 ms/ SWT 5 s 1 PK VIEW 10 20 30 40 50 60 70 80 90 100 * A Att 10 dBRef 107 dBμV RBW 100 kHz VBW 300 kHz Center 309.92 MHz500 ms/ SWT 5 s 1 PK VIEW 10 20 30 40 50 60 70 80 90 100 * A Att 10 dBRef 107 dBμV RBW 100 kHz VBW 300 kHz Center 304.22 MHz500 ms/ SWT 5 s VIEW 1 PK 10 20 30 40 50 60 70 80 90 100 * A Att 10 dB MAXH RBW 100 kHz VBW 300 kHz SWT 100 msRef 107 dBμV Center 304.22 MHz10 ms/ TRG SGL 1 PK 10 20 30 40 50 60 70 80 90 100 1 Marker 1 [T1 ] 57.44 dBμ V 0.000000 s 2 Delta 2 [T1 ] 0.26 dB 35.400000 ms 3 Delta 3 [T1 ] 1.02 dB 53.000000 ms 4 Delta 4 [T1 ] 1.10 dB 73.400000 ms 1 Delta 1 [T1 ] 0.23 dB 18.801000 ms TRG 57 dBμV * A Att 10 dB MAXH Ref 107 dBμV TRG Center 309.92 MHz10 ms/ RBW 100 kHz VBW 300 kHz SWT 100 ms SGL 1 PK 10 20 30 40 50 60 70 80 90 100 1 Marker 1 [T1 ] 57.26 dBμ V 0.000000 s 2 Delta 2 [T1 ] 1.20 dB 34.400000 ms 3 Delta 3 [T1 ] 1.24 dB 51.200000 ms 4 Delta 4 [T1 ] 1.41 dB 68.000000 ms 1 Delta 1 [T1 ] 0.98 dB 19.001000 ms TRG 57 dBμV * A Att 10 dB MAXH Ref 107 dBμV TRG 1 PK Center 314.28 MHz10 ms/ RBW 100 kHz VBW 300 kHz SWT 100 ms SGL 10 20 30 40 50 60 70 80 90 100 1 Marker 1 [T1 ] 57.26 dBμ V 0.000000 s 2 Delta 2 [T1 ] 1.80 dB 40.000000 ms 3 Delta 3 [T1 ] 0.86 dB 56.600000 ms 4 Delta 4 [T1 ] 2.15 dB 78.400000 ms 1 Delta 1 [T1 ] 0.92 dB 19.401000 ms TRG 57 dBμV Trigger Signal area 5 seconds Trigger Signal area 5 seconds Trigger Signal area 5 seconds

Issue Date: 19 April, 2011 Report No.: RY1104J19R1 Model: MTJP-T01-04/-09/-14 RF Technologies Ltd. Page 18 of 21 472, Nippa-cho, Kohoku-ku, Yokohama, 223-0057, Japan Telephone: +81+(0)45- 534-0645, FAX: +81+(0)45- 534-0646, Web: http://www.rft.jp RFT 3 Test setup photographs 3.1 Definition of the EUT axis and EUT style The following configuration is defined as X-Plane The following configuration is defined as Y-Plane Issue Date: 19 April, 2011 Report No.: RY1104J19R1 Model: MTJP-T01-04/-09/-14 RF Technologies Ltd. Page 19 of 21 472, Nippa-cho, Kohoku-ku, Yokohama, 223-0057, Japan Telephone: +81+(0)45- 534-0645, FAX: +81+(0)45- 534-0646, Web: http://www.rft.jp RFT The following configuration is defined as Z-Plane Issue Date: 19 April, 2011 Report No.: RY1104J19R1 Model: MTJP-T01-04/-09/-14 RF Technologies Ltd. Page 20 of 21 472, Nippa-cho, Kohoku-ku, Yokohama, 223-0057, Japan Telephone: +81+(0)45- 534-0645, FAX: +81+(0)45- 534-0646, Web: http://www.rft.jp RFT 3.2 Radiated spurious emissions