ZHZPG1302LoRaWAN Concentrator

www.dragino.com PG1302 LoRaWAN Concentrator 1 / 20 www.dragino.com PG1302 LoRaWAN Concentrator 2 / 20 Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The host OEM user manual must also contain clear instructions on how end users canfind and/or access the module and the FCC ID: ZHZPG1302 FCC Statement: "This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help." The proposed FCC IC label format is to be placed on the module. If it is not visible when the module is installed into the system, “Contains FCC ID: ZHZPG1302,” shall be placed on the outside of final host system. Antenna info Model Manufacturer Antenna Gain Antenna Type Connector Type BLG-AN-040 Datasheet Dragino Technology Co., Limited. 2.69dBi Fibre-glass epoxy antenna - - Dragino Technology Co., Limited. 3.0 External antenna - www.dragino.com PG1302 LoRaWAN Concentrator 3 / 20 LG01 LoRa Gateway User Manual Document Version: 1.0.1 Image Version: v1.0 Version Description Date 1.0 Release 2020-Dec-9 1.0.1 Add FAQ for how to get lorapktfwd.deb 2021-May-17 www.dragino.com PG1302 LoRaWAN Concentrator 4 / 20 Index: 1 Introduction ....................................................................................................... 5 1.1 What is PG1301 LoRaWAN Concentrator? ................................................ 5 1.2 Features ................................................................................................... 5 1.3 General Interfaces .................................................................................... 5 1.4 System Structure ...................................................................................... 6 1.5 Pin Mapping ............................................................................................. 6 1.6 Power Consumption ................................................................................. 7 1.7 Applications .............................................................................................. 7 ✓ Smart Buildings & Home Automation .......................................................... 7 ✓ Logistics and Supply Chain Management ..................................................... 7 ✓ Smart Metering ........................................................................................... 7 ✓ Smart Agriculture ........................................................................................ 7 ✓ Smart Cities ................................................................................................. 7 ✓ Smart Factory .............................................................................................. 7 2 Example: Set up as LoRaWAN gateway. ............................................................... 7 2.1 System structure ....................................................................................... 7 2.2 Hardware Installation ............................................................................... 8 2.3 Install the software ................................................................................... 8 2.3.1 Get Gateway ID in Raspberry and input this in TTN. ........................ 8 2.3.2 Download and install LoRaWAN packet forwarder .......................... 9 2.3.3 Config Gateway ID, Frequency Band and Server address ............... 10 2.3.4 Commands to handle service ........................................................ 11 3 Order Info ......................................................................................................... 11 4 Packing Info ...................................................................................................... 11 5 FAQ ................................................................................................................... 12 5.1 How to compile the pkt-fwd for RPi? ...................................................... 12 6 Reference ......................................................................................................... 12 7 Support ............................................................................................................ 12 www.dragino.com PG1302 LoRaWAN Concentrator 5 / 20 1 Introduction 1.1 What is PG1301 LoRaWAN Concentrator? The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data conce…

Text truncated - open the document above for the full version.

DATE : 2022-01-12 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Dragino Technology Co., Limited. And Room 202,BaoChengTai industrial park,No.8 CaiYun, LongCheng Street,LongGang District, Shenzhen 518116, China Signature: Name: edwin chen Title: Manager Company: Dragino Technology Co., Limited.

Dragino Technology Co., Limited. FCC Modular Approval Request Rev 3.0 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Subject; Modular Transmitter Application Company name: Dragino Technology Co., Limited. FCC ID: ZHZPG1302 Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID ZHZPG1302 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. Yes, It has a RF shielding The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. Yes, The module has it’s own buffered modulation/data inputs unit. The module must contain power supply regulation on the module. Yes, The module has a power supply circuitry. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). Yes, The module has a permanently antenna. The module must demonstrate compliance in a stand-alone configuration. Yes, The module compliance a stand-alone configuration. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). Yes, The label is pasted on the bottom of the module. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. Yes, The module compliance all conditions provided in the integration instructions by the grantee. The module must comply with RF exposure requirements Yes, The module compliance with RF exposure requirements Dragino Technology Co., Limited. FCC Modular Approval Request Rev 3.0 Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist.Refer to the KDB for description of the complete requirements; KDB Ref Sect Requirements of KDB 996369 D03 User Manual Page Number reference 2.2 List of applicable FCC rules This product compliance with FCC Part 15C section 15.249, section 15.203,section 15.207,section 15.209, section 15.215. 2.3 Summarize the specific operational use conditions This product has two Integral antenna 2.4 Limited module procedures This product is a limited module 2.5 Trace antenna designs This product without trace antenna designs 2.6 RF exposure considerations race antenna designs compliance RF exposure limits 2.7 Antennas This product has an Integral antenna 2.8 Label and compliance information The host system using this module , should label in a visible area indicated the following texts: ”Contains FCC ID : ZHZPG1302” 2.9 Information on test modes and additional testing requirements Data transfer module demo can control the EUT works in RF test mode and specified channel 2.10 Additional testing, Part 15 Subpart B disclaimer Yes, The module compliance withRF exposurerequirements Name: edwin chen Date: 2022-03-03 Title: Manager Signature of applicant

Dragino Technology Co., Limited. DATE : 2022-01-12 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: ZHZPG1302 Product Name: LoRaWAN Concentrator Request for Confidentiality To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature: Name: edwin chen Title: Manager Company: Dragino Technology Co., Limited.

Global United Technology Services Co., Ltd. Report No.: GTSL202112000228 External Photo Product Name: LoRaWAN Concentrator Model No.: PG1302 Lora ANT Lora ANT Global United Technology Services Co., Ltd. ------End------

Label &Label location Size:25mm*35mm LoRaWAN Concentrator Model: PG1302 FCC ID:ZHZPG1302 Made in China

Global United Technology Services Co., Ltd. Report No.: GTSL202112000228 Internal Photo Product Name: LoRaWAN Concentrator Model No.: PG1302 ------End------

FCC ID: ZHZPG1302 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation Wireless function Output power to antenna (dBm) Antenna Gain(dBi) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 125KHz Bandwidth 17.487 2.00 39.5366 0.20 0.602 PASS

Global United Technology Services Co., Ltd. Report No.: GTSL202112000228F01 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 44 1 Cover Page TEST REPORT Applicant: Dragino Technology Co., Limited. Address of Applicant: Room 202,BaoChengTai industrial park,No.8 CaiYun, LongCheng Street,LongGang District, Shenzhen 518116, China Manufacturer/Factory : Dragino Technology Co., Limited. Address of Manufacturer/Factory : Room 202,BaoChengTai industrial park,No.8 CaiYun LongCheng Street,LongGang District, Shenzhen 518116, China Equipment Under Test (EUT) Product Name: LoRaWAN Concentrator Model No.: PG1302 Trade Mark: Dragino FCC ID: ZHZPG1302 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: Sep. 24, 2021 Date of Test: Sep. 24- Oct. 13, 2021 Date of report issued: Oct. 13, 2021 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSL202112000228F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 44 2 Version Version No. Date Description 00 Oct. 13, 2021 Original Prepared By: Date: Oct. 13, 2021 Project Engineer Check By: Date: Oct. 13, 2021 Reviewer Report No.: GTSL202112000228F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 44 3 Contents Page 1 COVER PAGE .......................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 7 5.7 TEST LOCATION .................................................................................................................................. 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 10 7.1 ANTENNA REQUIREMENT ................................................................................................................... 10 7.2 CONDUCTED EMISSIONS ................................................................................................................... 11 8 TEST ITEMS FOR HYBRID ................................................................................................................... 16 8.1 CONDUCTED PEAK OUTPUT POWER .................................................................................................. 16 8.2 20DB EMISSION BANDWIDTH ............................................................................................................. 18 8.3 CARRIER FREQUENCIES SEPARATION ................................................................................................ 20 8.4 HOPPING CHANNEL NUMBER ............................................................................................................. 22 8.5 DWELL TIME ..................................................................................................................................... 23 8.6 PSEUDORANDOM FREQUENCY HOPPING SEQUENCE .......................................................................... 25 8.7 BAND EDGE ...................................................................................................................................... 26 8.7.1 Conducted Emission Method ..................................................................................................... 26 8.7.2 Radiated Emission Method ........................................................................................................ 28 8.8 SPURIOUS EMISSION ......................................................................................................................... 29 8.8.1 Conducted Emission Method ..................................................................................................... 29 8…

Text truncated - open the document above for the full version.

GTSL202112000228 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 1 of 3 Product Name: LoRaWAN Concentrator Test Model No.: PG1302 Test Setup Photo Radiated Emission GTSL202112000228 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 3 GTSL202112000228 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 3 Conducted Emission ------End------