ZIOTD12250Dot Matrix Printer

User Guide 1225 Matrix Printer Tally Dascom 1225 I Important Safety Instructions (English) Read the following instructions thoroughly before starting up your printer. • Never carry out maintenance or repair work yourself. Always contact a qualified service technician. • Keep this Operator’s Manual in a place which is easily accessible at all times. • Place the printer on a solid and even base so that it cannot fall. • Never place the printer in the vicinity of inflammable gas or explosive substances. • Ensure the printer is connected to a socket with the correct mains voltage. • Always disconnect the printer from the mains before opening the device to perform maintenance work or remedy errors. • Do not expose the printer to high temperatures, direct sunlight or dust. • Keep all liquids away from the printer. • Protect the printer from shock, impact and vibration. • Make sure that the printer and computer are switched off before connecting the data cable. • The print head will become very hot during printing; avoid contact with the print head after printing has finished. • Do not perform any operation or action in any way other than those provided in this manual. When in doubt, contact your dealer or your customer support. Tally Dascom 1225 II Wichtige Sicherheitshinweise (German) Lesen Sie bitte diese Sicherheitshinweise durch, bevor sie den Drucker in Betrieb nehmen.  Führen Sie Wartungsarbeiten und Reparaturen keinesfalls selbst aus, sondern verständigen Sie immer einen qualifizierten Servicetechniker.  Bewahren Sie diese Dokumentation an einem jederzeit zugänglichen Ort auf.  Den Drucker auf stabilem und ebenem Untergrund so aufstellen, dass er nicht zu Boden fallen kann.  Stellen Sie den Drucker keinesfalls in der Nähe von leicht entzündlichen Gasen oder explosiven Stoffen auf.  Den Drucker nur an eine Steckdose mit der richtigen Spannung anschließen.  Wenn Sie den Drucker vom Netz trennen wollen, den Drucker ausschalten und immer den Netzstecker an der Steckdose ziehen.  Den Drucker weder hohen Temperaturen noch direktem Sonnenlicht und Staub aussetzen.  Keine Flüssigkeiten mit dem Drucker in Berührung bringen.  Den Drucker keinen Erschütterungen, Stößen oder Vibrationen aussetzen.  Sicherstellen, dass der Drucker und der Computer ausgeschaltet sind, bevor das Datenkabel angeschlossen wird.  Der Druckkopf wird während des Druckens heiß. Vor dem Berühren deshalb einige Zeit abkühlen lassen.  Weichen Sie bei der Bedienung des Druckers nicht von den Anweisungen in der Dokumentation ab. Bei Unklarheiten wenden Sie sich bitte an Ihren Händler oder Ihren Kundendienst. Tally Dascom 1225 III Consignes importantes de sécurité (French) Lire attentivement les instructions suivantes avant de mettre l’imprimante en service.  Ne jamais effectuer soi-même les travaux d’entretien et de réparations. Contacter toujours un dépanneur qualifié.  Placer l’imprimante sur un support stable de façon à ce qu’elle ne puisse pas tomber.  Ne jamais placer l’imprimante à proximité de sources de gaz aisément inflammables ou de substances explosives.  Ne connecter l’imprimante à une prise que lorsque la tension est correcte.  Pour déconnecter l’imprimante de l’alimentation principale, mettre l’imprimante hors tension et toujours débrancher le connecteur secteur de la prise murale.  Ne pas exposer l’imprimante à des températures élevées, à la lumière directe du soleil ou à la poussière.  Ne pas mettre l’imprimante en contact avec des liquides.  Ne pas exposer l’imprimante à des chocs, impacts ou vibrations.  S’assurer que l’imprimante et l’ordinateur sont hors tension avant de connecter le câble de données.  La tête d’impression est brûlante pendant l’impression. C’est pourquoi laissez-la refroidir quelques instants avant d’y toucher.  N'exécutez aucune opération ni action d'une autre manière que celle indiquée dans ce manuel. En cas de doute, veuillez contacter votre distributeur ou service après-vente. Tally Dascom 1225 IV Indicazioni di sicurezza importanti (Italian) Prima di mettere in funzione la stampante, leggere attentamente le seguenti indicazioni. Non eseguire mai da sé gli interventi di manutenzione e riparazione, ma rivolgersi sempre a un tecnico di assistenza qualificato.  Conservare le presenti istruzioni per l’uso in un luogo sempre accessibile.  Collocare la stampante su una superficie stabile, per evitare che cada a terra.  Non collocare la stampante in prossimità di gas facilmente infiammabili o di sostanze esplosive.  Collegare la stampante a una presa di corrente con tensione adeguata.  Per scollegare la stampante dalla rete di alimentazione, spegnere la stampante e disinserire sempre il connettore di rete dalla presa.  Non esporre la stampante ad elevate temperature né alla luce solare diretta e alla polvere.  Evitare il contatto della stampante con liquidi.  Non esporre la stampante a colpi, scosse o vibrazioni.  Verificare che la stampante e il computer siano spenti prima di collegare il cavo di trasmissione dati.  Durante la stampa, la testina si surriscal-da notevolmente. Prima di toccarla, se necessario opportuno quindi lasciarla raffreddare qualche istante.  Non eseguire alcuna operazione o azione se non nella maniera descritta nel presente manuale. In caso di dubbio, contattare il rivenditore o dalla società incaricata dell’assistenza. Tally Dascom 1225 V Instrucciones de seguridad importantes (Spanish) Lea las siguientes instrucciones con esmero antes de poner la impresora en servicio. Nunca lleve a cabo trabajos de mantenimiento o reparación Ud. mismo, sino consulte a un técnico de servicio calificado.  Guarde las presentes instrucciones de servicio en un lugar de fácil acceso en cualquier momento.  Ponga la impresora sobre un base estable de manera que no pueda caer al suelo.  Nunca coloque la impresora en la vecindad de gases de fácil inflamabilidad o sunstancias explosivas.  Asegure conectar la impresora sólo a un enchufe con un voltaje correcto…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 Dascom Printer (Jiangmen) Co.,Ltd. —————————————————————— 2011-07-28 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Dascom Printer (Jiangmen) Co.,Ltd . hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product description: Dot Matrix Printer model name: 1225 We affirm that between SIEMIC and Dascom Printer (Jiangmen) Co.,Ltd. any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Huangyingsheng [email protected] 0750-3867631

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 1.0 2.0 August – 11 - 2008 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 2.0 Dascom Printer (Jiangmen) Co.,Ltd. —————————————————————— 2011-07-28 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID:ZIOTD12250 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Operational Description - Schematic The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Huangyingsheng [email protected] 0750-3867631

Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 22 of 37 www.siemic.com Annex B. EUT AND TEST SETUP PHOTOGRAPHS Annex B.i. Photograph1: EUT External Photo Front View of EUT Rear View of EUT Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 23 of 37 www.siemic.com Right View of EUT Left View of EUT

Label Location

Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 24 of 37 www.siemic.com Annex B.ii. Photograph 2: EUT Internal Photo Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 25 of 37 www.siemic.com Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 26 of 37 www.siemic.com Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 27 of 37 www.siemic.com Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 28 of 37 www.siemic.com Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 29 of 37 www.siemic.com Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 30 of 37 www.siemic.com

Dascom Printer (Jiangmen) Co.,Ltd. Dot Matrix Printer Model:1225 07 August 2011 Report No.: 11020858-F (This report supersedes NONE) This test report may be reproduced in full only. Test result presented in this test report is applicable to the representative sample only. Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 2 of 37 www.siemic.com CERTIFICATE OF TEST Date of Issue: 07 August 2011 Company Name: Dascom Printer (Jiangmen) Co.,Ltd. Product Name/Model: Dot Matrix Printer/ 1225 Stipulated Standard: FCC 15B 2010 (Class B) Modifications made to the product : None This Test Report is Issued Under the Authority of: William Long Compliance Engineer Spring Zhou Technical Director Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 3 of 37 www.siemic.com Laboratory Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management through out a project. Our extensive experience with China, Asia Pacific, North America, European, and international compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets. Accreditations for Conformity Assessment Country/RegionAccreditation Body Scope USA FCC, A2LA EMC , RF/Wireless , Telecom Canada IC, A2LA, NIST EMC, RF/Wireless , Telecom Taiwan BSMI , NCC , NIST EMC, RF, Telecom , Safety Hong Kong OFTA , NIST RF/Wireless ,Telecom Australia NATA, NIST EMC, RF, Telecom , Safety Korea KCC/RRA, NIST EMI, EMS, RF , Telecom, Safety Japan VCCI, JATE, TELEC, RFT EMI, RF/Wireless, Telecom Mexico NOM, COFETEL, Caniety Safety, EMC , RF/Wireless, Telecom Europe A2LA, NIST EMC, RF, Telecom , Safety Accreditations for Product Certifications Country Accreditation Body Scope USA FCC TCB, NIST EMC , RF , Telecom Canada IC FCB , NIST EMC , RF , Telecom Singapore iDA, NIST EMC , RF , Telecom EU NB EMC & R&TTE Directive Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 4 of 37 www.siemic.com This page has been left blank intentionally. Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 5 of 37 www.siemic.com CONTENTS 1 EXECUTIVE SUMMARY & EUT INFORMATION.............................................................................................................6 2 TECHNICAL DETAILS..................................................................................................................................................7 3 MODIFICATION............................................................................................................................................................8 4 TEST SUMMARY..........................................................................................................................................................9 5 MEASUREMENTS, EXAMINATION AND DERIVED RESULTS......................................................................................10 ANNEX A. TEST INSTRUMENTATION & METHOD..............................................................................................................18 ANNEX B. EUT AND TEST SETUP PHOTOGRAPHS...........................................................................................................22 ANNEX C. TEST SETUP AND SUPPORTING EQUIPMENT...................................................................................................31 ANNEX D. USER MANUAL / BLOCK DIAGRAM / SCHEMATICS / PART LIST.......................................................................35 ANNEX E. SIEMIC ACCREDITATION CERTIFICATES..........................................................................................................36 Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 6 of 37 www.siemic.com 1 Executive Summary & EUT Information The purpose of this test program was to demonstrate compliance of the Dascom Printer (Jiangmen) Co.,Ltd. Dot Matrix Printer, against the current Stipulated Standards. TheDot Matrix Printer has demonstrated compliance with the FCC Part 15 Subpart B Class B: 2010. EUT Information EUT Description Dot Matrix Printer Model No 1225 Serial No N/A Input Power 100-240V AC 50/60Hz Classification Per Stipulated Test Standard Class B Emission Product Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 7 of 37 www.siemic.com 2 TECHNICAL DETAILS Purpose Compliance testing of Dot Matrix Printer with stipulated standards Applicant / Client Dascom Printer (Jiangmen) Co.,Ltd. No.399, Jin Xing Road, Jiang Hai District, Jiangmen City,Guang Dong Province, P.R. China . Manufacturer Dascom Printer (Jiangmen) Co.,Ltd. No.399, Jin Xing Road, Jiang Hai District, Jiangmen City,Guang Dong Province, P.R. China Laboratory performing the tests SIEMIC Nanjing (China) Laboratories NO.2-1,Longcang Dadao, Yuhua Economic Development Zone, Nanjing, China Tel:+86(25)86730128/86730129 Fax:+86(25)86730127 Email:[email protected] Test report reference number 11020858-F Date EUT received 08 July 2011 Standard applied FCC Part 15 Subpart B Class B: 2010 Dates of test (from – to) July 15-28 July 2011 No of Units #1 Equipment Categ…

Text truncated - open the document above for the full version.

Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 13 of 37 www.siemic.com Conducted Emission – Front View Conducted Emission - Rear View Title: EMC Test Report for Dot Matrix Printer Model: 1225 To: FCC Part 15 Subpart B Class B: 2010 , ANSI C63.4:2009 Serial#: 11020858-F Issue Date: 07 August 2011 Page: 17 of 37 www.siemic.com Radiated Emission (30MHz - 1GHz) – Front View Radiated Emission (30MHz – 1GHz) - Rear View