ZNFL05DPCS GSM Phone with WLAN, Bluetooth and RFID

Don't forget your mobile phone ... or your manners! When using your mobile phone in a public place, don't forget to show common courtesy and consideration to others around you. General Inquiries <docomo Information Center> Repairs For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo Shop etc. near you searched on the NTT DOCOMO website. NTT DOCOMO website http://www.nttdocomo.co.jp/english/ Please conrm the phone number before you dial. 0120-800-000 * Unavailable from part of IP phones. From land-line phones (In Japanese only) * Unavailable from land-line phones, etc. (No prex) 151 (toll free) From DOCOMO mobile phones (In Japanese only) 0120-800-000 * Unavailable from part of IP phones. From land-line phones (In Japanese only) * Unavailable from land-line phones, etc. (No prex) 113 (toll free) From DOCOMO mobile phones (In Japanese only) To prevent damage to the environment, bring used battery packs to a docomo service counter, a docomo agent or recycle center. Li-ion00 '12.XX (1st Edition) MBMXXXXXXXX ’12.XX L-05D INSTRUCTION MANUAL L-05D INSTRUCTION MANUAL Contents / Precautions Confirmation and Settings before Using docomo Palette UI Application Using Overseas Appendix / Index File Management Mail / Internet Settings Calling / Network Services (Business hours: 9:00 a.m. to 8:00 p.m.) * Service available in: English, Portuguese, Chinese, Spanish, Korean. * Unavailable from part of IP phones. 0120-005-250(toll free) (Business hours: 9:00 a.m. to 8:00 p.m. (open all year round)) (Business hours: 24 hours (open all year round)) Introduction Thank you for purchasing "L-05D". Before or while using, be sure to thoroughly read this manual to ensure its correct use. Before Using this Terminal •This terminal supports LTE, W-CDMA, GSM/GPRS, and wireless LAN systems. •This terminal uses wireless, therefore, it may not function in locations where it is difficult for radio waves to penetrate or areas where radio wave signals are weak, such as tunnels, underground passages, and some buildings or places out of the Xi and FOMA service areas. Even when you are on a higher floor of a tall building or condominium and nothing blocks your view outside, this terminal may not be able to receive or transmit signals. Also communication may be interrupted even when the Antenna Indication Lamp indicates a strong signal reception with four antenna indication bars. •Because the terminal uses radio waves, there is a possibility that a third party may intercept your call. However, LTE, W-CDMA, and GSM/GPRS systems automatically support privacy functions for all calls, so even if a third party intercepts a call through a receiver, it is only received as noise. •This terminal encodes sound communication by wireless and also as digital data. When you are operating your terminal while moving to a location subject to weaker radio wave conditions, the transmitted data may not be correctly decoded and as a result the decoded sound may differ somewhat from the actual sound. •This terminal is supported in Xi Areas, FOMA Plus- Areas, and FOMA HIGH-SPEED Areas. •Keep a separate record of any information stored on this terminal and store the copies in a safe location. DOCOMO assumes no responsibility for any loss of your data resulting from malfunctions, repair, changing of the model or other handling of the terminal. •As with PCs, some applications that you install may cause unstable terminal operation, or may send your location information or personal information registered in the terminal to outside via the Internet and the information may be used improperly. Therefore, verify the supplier and operating conditions of the applications before using. •It is recommended that you save important data to a microSD card. Unlocking SIM Unlocking SIM is available on this terminal. Unlocking SIM enables a SIM card from other makers to be used. •Unlocking SIM is available at a docomo Shop. •A fee is required to unlock the SIM. •When a SIM card from another maker is used, LTE is not available. In addition, its services and functions may get restricted. DOCOMO assumes no responsibility for any operation problems based on SIMs from other makers. •Visit the DOCOMO website for detailed information on unlocking SIM. Download the latest information of this manual from DOCOMO website. Also you can check the latest information from this terminal. „ Quick Start Guide (Accessories, in Japanese only) Basic function operations are explained. „ INSTRUCTION MANUAL (Applications for this Terminal, in Japanese only) Details about functions and operations are explained. Tap "Applications" u "Instruction Manual" on the Home screen. „ INSTRUCTION MANUAL (PDF file) Details about functions and operations are explained. Download from DOCOMO website. http://www.nttdocomo.co.jp/support/trouble/ manual/download/index.html * The URL and information contained in the manual are subject to change without prior notice. 1 Supplied Accessories About other optional accessories and related equipment → P207 L-05D (with warranty and back cover ) Quick Start Guide Battery Pack 2 Contents / Precautions microSDHC card (4GB) (sample) (with manual) 3 Contents / Precautions How to Use this Manual •Any reprint of this manual is prohibited. •This manual is subject to change without prior notice. •"This terminal" indicates "L-05D" in this manual. Please keep this in mind. Explanation of operations The selection operations of those icons and items displayed on the touch screen are described below in this manual. DescriptionOperation description "Applications" on the Home screen Tap on the Home screen. •The icons on the Home screen are explained below. : Applications : Phone : sp-mode mail : Browser u "Settings" on the Home screen Tap at the bottom of the screen, and then tap "Settings" from the displayed Option menu. "Wireless & networks" u "Mobile networks" Tap "Wireless & networks" displayed on the screen, and…

Text truncated - open the document above for the full version.

cannot be performed when nearby electric devices are powered on. TVs and radios may receive noise or video interference. •Move the Bluetooth device to a place where connection is available when there is a broadcast station or radio near the Bluetooth device, and the terminal cannot be connected to the device. Strong radio waves may prevent connection between the terminal and the Bluetooth device. •Wireless connection is available with Bluetooth device put in a bag or pocket. However, lowering of communication speed or noise may result when you are in between the Bluetooth device and the terminal. •Bluetooth communication in some cases may result in an accident, so turn off the terminal and other Bluetooth devices in the following places. - On trains - On airplanes - In hospitals - Near automatic doors or fire alarms - In places such as gas stations where flammable gas is generated „ Reception interference caused by wireless LAN devices •As the terminal's Bluetooth device and wireless LAN devices use the same frequency (2.4 GHz), reception interference may occur or the communications speed may lower if you use the Bluetooth device near the wireless LAN devices. Also, you may hear noise or have a connection problem. In these cases, do the following: - Keep the Bluetooth device over 10 m away from a wireless LAN device. - Within 10 m, turn off either the Bluetooth device or the wireless LAN device. „ Pass code (PIN) of Bluetooth function •Pass code (PIN) is an authentication code to enter when accessing Bluetooth devices for the first time to recognize and permit the connection each other. Entering the same pass code (PIN) (up to 16 single-byte alphanumeric characters) on each sending/receiving device is required. •On the terminal, pass code may be displayed as "PIN". 135 File Management Turning ON Bluetooth Function to Make the Terminal Discoverable a From the Home screen, u "Settings" u "Wireless & networks" u "Bluetooth settings" b Place a check mark on "Bluetooth" •Bluetooth function turns ON. c Tap "Device name" and enter the terminal name u Tap "OK" d Place a check mark on "Discoverable" •The terminal can be detected by another Bluetooth device for approx. 120 seconds. Note •When you do not use Bluetooth function, turn it OFF to save the battery. •The setting of the Bluetooth ON/OFF is not changed even when the power is turned off. Pairing/Connecting with Other Bluetooth Device To transfer data by Bluetooth connection, perform pairing (pairing setting) with the device in advance and register it to the terminal. •Depending on Bluetooth device, only pairing is performed or pairing and connecting is performed successively. a From the Home screen, u "Settings" u "Wireless & networks" u "Bluetooth settings" u "Scan for devices" •Detected Bluetooth devices list appears. b Tap a device that you want to connect with u Tap "Pair" •If pass code (PIN) is set on Bluetooth devices, enter pass code (PIN) and tap "OK". •For some Bluetooth devices, after completion of pairing, connection may be established successively by tapping a device. 136 File Management Note •Even for device requiring entry of pass code (PIN) when pairing, once pairing is performed, entering pass code (PIN) is not necessary for next connection. •Pairing can be set even if a device is unable to connect such as non-profile-compliant. However, it cannot be connected even if you tap the device. •Touch a device that has already been paired for over 1 second, tap "Connection access" and then select "Automatic" to connect or "Always ask". •Devices that are not compatible with SCMS-T cannot play any audio related data such as music. When the other device requests for pairing When a screen asking for pairing for Bluetooth connection appears, tap "Pair & connect" or enter pass code (PIN) if required and tap "OK". Disconnecting a Tap the connected device on "Bluetooth devices" list u "OK" •Touch the connected device for over 1 second and tap "Disconnect" to disconnect. Canceling the pairing a Touch a device to unpair for over 1 second on "Bluetooth devices" list u Tap "Disconnect & unpair" •If you want to unpair with a device being only paired, touch the device for over 1 second and tap "Unpair". 137 File Management Sending/Receiving Data via Bluetooth Function •Set the Bluetooth function to ON beforehand to be discoverable. Sending data via Bluetooth You can send data of Phonebook (name card data in vcf format), files such as photos or videos, etc. to a Bluetooth device (PC etc.). •For sending, perform the operation from the menu such as "Share"/"Send" of each application. Receiving data via Bluetooth a Set the terminal to discoverable b Tap "Accept" when Bluetooth Authorization Request screen appears • is displayed in the status bar, and data reception starts. •You can confirm data reception on the Notification panel. •Message screen appears at the bottom screen after receiving data. External Device Connection Connecting the Terminal with a PC Make sure that Windows Media Player 11 or later and dedicated driver are installed on PC. If Windows Media Player 11 or later and dedicated driver are not installed, the terminal may not be recognized by PC correctly. For details about operating environment, refer to "File Operation" (P131). 138 File Management a Connect the microUSB connector of USB connection cable to the microUSB connection terminal of the terminal •Insert the microUSB connector horizontally with the surface with the USB mark facing up. b Connect the USB connector of USB connection cable to the USB port of PC •The terminal is recognized automatically by PC. •Request for installation of the device driver may appear on your PC. If it appears, cancel it. • is displayed in the status bar. •The "USB connection mode" screen appears on the terminal. If the "USB connection mode" screen does not appear, drag or swipe the status bar down to open the Notification panel, and then tap "Charge only", "Mass storage", "PC sync", or "USB tether…

Text truncated - open the document above for the full version.

          !"# Date: March 28, 2012 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: ZNFL05D Equipment Class:DXX&Part15Low Power Communication Device Transmitter To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information ActElectronicsMobileComm hereby requests confide ntiality and treatment of certain information accompanying this applica tion. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for , days after the grant as outlined in Public Notice DA 04-1705. This provision will give  MobileComm temporary confidentiality of commercially sensitive information prior to product release. The reque sted Permanent and Temporary Confidential exhibits are listed as follows: '-.+%/0-+1+-.023%+33+ 45 6  %e )  1 Block Diagram 2 Operational Descriptions '-.+ 3 Schematics 4 External Photos 5 Internal Photos 6 Test-Setup Photos /0-+1+-. 7 User’s Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Jacob Cho Director On behalf of LG Electronics MobileComm U.S.A., Inc. LG Electronics USA 1000 Sylvan Avenue Englewood Cliffs, NJ 07632

External photos of EUT Front view of EUT Rear view of EUT Top view of EUT Bottom view of EUT Side view of EUT

Internal photos of EUT Inner view of PCB NFCAntenna GSM Antenna Top view of PCB Bottom view of PCB BT & LAN Antenna Top view of Sub PCB Bottom view of Sub PCB Top view of FPCB Bottom view of FPCB View of FPCB GSM Antenna

Report Number :F690501/RF-RTL005461-1Page:2of17 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory) 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea INDEX TABLE OF CONTENTSPage 1. General Information --------------------------------------------------------------------3 2. Transmitter AC Power Line Conducted Emissions--------------------------5 3. Radiated Emissions--------------------------------------------------------------------10 4. Frequency Stability---------------------------------------------------------------------14 5. 20 dB Bandwidth-------------------------------------------------------------------------16 Report Number :F690501/RF-RTL005461-1Page:3of17 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory) 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea 1. General Information 1.1. Testing laboratory SGS Korea Co., Ltd.(Gunpo Laboratory) -705, Dongchun-Dong Sooji-Gu, Yongin-Shi, Kyungki-Do, South Korea. -Wireless Div. 2FL, 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea 435-040 www.ee.sgs.com/korea Phone No.:+82 31 428 5700 Fax No.:+82 31 427 2371 1.2. Details of Applicant Applicant: LG Electronics MobileComm U.S.A., Inc. Address: 10101 Old Grove Road, San Diego, CA 92131 Contact Person: An, Heeju Phone No.: +82 +10 2846 2750 1.3. Description of EUT Kind of Product Mobile Phone Model Name L-05D Serial Number N/A Power Supply DC 3.8 V (Li-Ion Battery) Frequency Range 13.56㎒ Modulation Technique ASK Number of Channels 1 Antenna Type Internal type 1.4. Declaration by the manufacturer - N/A Report Number :F690501/RF-RTL005461-1Page:4of17 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory) 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea 1.4. Test Equipment List EquipmentManufacturerModelS/NCal Due. Signal GeneratorR&S SMR40100272 Jul. 15, 2012 Signal GeneratorAgilent 8648D3847M00534Mar. 29, 2013 Spectrum AnalyzerR&SFSV30100955Mar. 29, 2013 Test ReceiverR&SESU26100109Feb. 21, 2013 Loop AntennaR&SHFH2-Z2100118Aug. 24, 2013 Bilog Antenna SCHWARZBECK MESSELEKTRONIK VULB9163396May 12, 2013 PreamplifierH.P.8447F2944A03909Jul. 04, 2012 Two-Line V-NetworkR&S ENV216100190Jan. 09, 2013 Test ReceiverR&S ESHS10863365/018Jul. 07, 2012 DC power SupplyAgilentU8002AMY49030063Jan. 03, 2013 Temperature Chamber HangilHGTP-4050HGTP-4050-04-01Sep. 27, 2012 Anechoic ChamberSY Corporation L × W × H (9.6 m × 6.4 m × 6.6 m) N.C.R.N.C.R. 1.5. Summary of Test Results The EUT has been tested according to the following specifications: Applied standard : FCC Part15 subpart C Standard sectionTest itemResult 15.207Transmitter AC Power Line Conducted EmissionComplied 15.225(a)(b)(c)(d) 15.209 Radiated emissionComplied 15.225(e)Frequency StabilityComplied 15.215(c) 20㏈Bandwidth - 1.6. Test report revision RevisionReport numberDescription 0F690501/RF-RTL005461Initial 1F690501/RF-RTL005461-1Re-measured radiated emissions Report Number :F690501/RF-RTL005461-1Page:5of17 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory) 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea 2. Transmitter AC power line conducted emission 2.1. Test Setup 2.2. Limit According to §15.207(a) for an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies, within the band 150㎑to 30㎒, shall not exceed the limits in the following table, as measured using a 50 uH/50 ohm line impedance stabilization network (LISN). Compliance with the provision of this paragraph shall on the measurement of the radio frequency voltage between each power line and ground at the power terminal. The lower applies at the boundary between the frequency ranges. Frequency of Emission (㎒) Conducted limit (㏈μV) Quasi-peakAverage 0.15 – 0.5066-56*56-46* 0.50 – 5.005646 5.00 – 30.06050 * Decreases with the logarithm of the frequency. Main power source Shield room enclosure to Test Receiver Table height 0.8 m 0.4 m LISN EUT Report Number :F690501/RF-RTL005461-1Page:6of17 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Korea Co., Ltd. (Gunpo Laboratory) 18-34, Sanbon-dong, Gunpo-si, Gyeonggi-do, Korea, 435-040 Tel. +82 31 428 5700 / Fax. +82 31 427 2371www.ee.sgs.com/korea 2.3. Test Procedures Radiated emissions from the EUT were measured according to the dictates of ANSI C63.4:2003 1. The test procedure is performed in a 6.5 m × 3.6 m× 3.6 m (L×W×H) shielded room. The EUT along with its peripherals were placed on a 1.0 m(W)× 1.5 m(L) and 0.8 m in height wooden table and the EUT was adjusted to maintain a 0.4 meter space from a vertical reference plane. 2. The EUT was connected to power mains through a line impedance stabilization network (LISN) which provides 50 ohm coupling impedance for measuring instrument and the chassis ground was bounded to the horizo…

Text truncated - open the document above for the full version.

Test setup photos of EUT A. Photo of Field Strength & Spurious Emission Test for 2 GHz WLAN B. Photo of Field Strength & Spurious Emission Test for Bluetooth C. Photo of Field Strength & Spurious Emission Test for NFC D. Photo of Field Strength & Spurious Emission Test for GSM E. Photos of conducted power line test for WLAN F. Photos of conducted power line test for Bluetooth G. photos of conducted power line test for NFC