ZNFL33LGSM/WCDMA/LTE PHONE + BLUETOOTH, & DTS b/g/n

Product Safety & Warranty Information LG L33L Copyright ©2015 LG Electronics, Inc. All rights reserved. (1.0) www.lg.com Información sobre la Garantía y Seguridad del Pr oducto LG L33L Printed in Chinawww.lg.com ENGLISH ESPAÑOL 1 Safety Safety Information Please read and observe the following information for safe and proper use of your phone and to prevent damage. WARNING! This product contains chemicals known to the State of California to cause cancer and birth defects or reproductive harm. Wash hands after handling. Caution: Violation of the instructions may cause minor or serious damage to the product. • For your safety, do not remove the battery incorporated in the product. • Do not disassemble or open crush, bend or deform, puncture or shred. • Repairs under warranty, at LG’s option, may include replacement parts or boards that are either new or reconditioned, provided that they have functionality equal to that of the parts being replaced. • Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard. • Avoid dropping the phone. If the phone is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. • For those host devices that utilize a USB port as a charging source, the host device’s user manual shall include a statement that the phone shall only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program. Charger and Adapter Safety • The charger and adapter are intended for indoor use only. • Insert the battery pack charger vertically into the wall power socket. • Unplug the power cord and charger during lightning storms to avoid electric shock or fire. • Use the correct adapter for your phone when using the battery pack charger abroad. Battery Information and Care • Please read the manual of specified charger about charging method. • Do not damage the power cord by bending, twisting, or heating. Do not use the plug if it is loose as it may cause electric shock or fire. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may cause electric shock or fire. 2 • Unplug the power cord prior to cleaning your phone, and clean the power plug pin when it’s dirty. When using the power plug, ensure that it’s firmly connected. If not, it may cause excessive heat or fire. If you put your phone in a pocket or bag without covering the receptacle of the phone (power plug pin), metallic articles (such as a coin, paperclip or pen) may short-circuit the phone. Short-circuit of the terminal may damage the battery and cause an explosion. Always cover the receptacle when not in use. • Never store your phone in temperature less than -20°C/-4°F or greater than 50°C/122 °F. • Charging temperature range is between 0°C/32°F and 45°C /113 °F. Do not charge the battery out of recommended temperature range. Charging out of recommended range might cause the generating heat or serious damage of battery. And also, it might cause the deterioration of battery’s characteristics and cycle life. • The battery pack has protection circuit to avoid the danger. Do not use near places that can generate static electricity more than 100V which could damage the protection circuit. Damaged protection circuits may generate smoke, rupture or ignite. • When using the battery for the first time, if it emits a bad smell, you see rust on it, or anything else abnormal, do not use the equipment and bring the battery to the shop which it was bought. • Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone. • Do not place or answer calls while charging the phone as it may short- circuit the phone and/or cause electric shock or fire. • Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. This could cause a fire. • Always unplug the charger from the wall socket after the phone is fully charged to save unnecessary power consumption of the charger. Care and Maintenance Your mobile device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years: Keep your Mobile Device away from: Liquids of any kind Keep the mobile device dry. Precipitation, humidity, and liquids contain minerals that will corrode electronic circuits. If 3 the mobile device does get wet, do not accelerate drying with the use of an oven, microwave, or dryer, because this may damage the mobile device and could cause a fire or explosion. Do not use the mobile device with a wet hand. Doing so may cause an electric shock to you or damage to the mobile device. Extreme heat or cold • Avoid temperatures below 0°C /32°F or above 45°C /113°F. • Use your phone in temperatures between 0°C /32°F and 40°C /104°F, if possible. Exposing your phone to extremely low or high temperatures may result in damage, malfunction, or even explosion. Microwaves Do not try to dry your mobile device in a microwave oven. Doing so may cause a fire or explosion. Dust and dirt Do not expose your mobile device to dust, dirt, or sand. Sunscreen lotion Do not expose or wear your device to any liquid like sunscreen lotion. Doing so may cause your device to or damage to the mobile device. Cleaning solutions Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the mobile device. Wipe it with a soft cloths lightly dampened in a mild soap-and-water solution. Shock or vibration Do not drop, knock, or shake the mobile device. Rough handling can break internal circuit boards. Paint Do not paint the mobile device. Paint can clog the device’smoving parts or ventilation openings and prevent proper operation. General Notice • An emergency call can be made only within a service area. For…

Text truncated - open the document above for the full version.

Date: January 30, 2015 U L Verif ication Services Inc. Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc.as our agent, we still recognize that we are responsible to: a)comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d)do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e)upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f)use certification only to indicate the products are certified as being in conformity with specified standards; g)endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i)keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j)take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) doc ument the actions taken. T his authorization is valid until further written notice from the applicant. S incerely Yours, ____________________ J ongchul Lee Director On b ehalf of LG E lectronics Mobilecomm U.S.A.,Inc

Fede ral Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 Sub ject: FCC ID: Request for C onfidentiality ZNFL33L To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, LG ELECTRONICS MobileComm USA hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give LG ELECTRONICS MobileComm USA temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: PE RMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram, Operational Descriptions and Tune-Up Procedure 2 Schematics, Part placement, and Part List 3 Antenna Specification SHORT-TERM 1 External Photos 2 Internal Photos 3 Test -Setup Photos 4 User’s Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Si ncerely Yours, Date: January 30, 2015 ____________________ Jongchul Lee Director On b e half of LG E le ctronics Mobilecomm U. S.A.,Inc

※ FCC ID Label Form *Note: T his label and its location complies with 47 CFR 2.925(d) that FCC ID is readily visible to the purchaser at the time of purchase, and be permanently affixed to the product. We, LG Electronics MobileComm USA, state that our device, FCC ID ZNFL33L, has a battery. However, the battery will not be placed in the battery compartment when delivery, so the label is visible to the users as they purchase the product and install the battery. Additionally, the label is permanently attached. The label it's attached to the EUT by an adhesive. The adhesive is a strong permanent type. Model No: LGL33L FCC ID: ZNFL33L I MEI : XXXXXXXXX Made in Korea Model No: L G L33L FCC ID: ZNF L33L Mad e in Korea Fig.1 Representation of FCC Label information

NVLAP LAB CODE 200065-0 SAR EVALUATION REPORT FCC 47 CFR § 2.1093 IEEE Std 1528-2013 For GSM/WCDMA/LTE PHONE + BLUETOOTH, & DTS b/g/n FCC ID: ZNFL33L Model Name: LG-L33L, L33L, LGL33L Report Number: 14I19561-S1 Issue Date: 1/30/2015 Prepared for LG ELECTRONICS MOBILECOMM U.S.A., INC. 1000 SYLVAN AVE ENGLEWOOD CLIFFS, NJ 07632 Prepared by UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 Report No.: 14I19561-S1 Issue Date: 1/30/2015 Page 2 of 45 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Revision History Rev. Date Revisions Revised By -- 1/30/2015 Initial Issue -- Report No.: 14I19561-S1 Issue Date: 1/30/2015 Page 3 of 45 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Table of Contents 1. Attestation of Test Results ............................................................................................................ 5 2. Test Specification, Methods and Procedures .............................................................................. 6 3. Facilities and Accreditation ........................................................................................................... 7 4. SAR Measurement System & Test Equipment ............................................................................ 8 4.1. SAR Measurement System .......................................................................................................... 8 4.2. SAR Scan Procedures .................................................................................................................. 9 4.3. Test Equipment .......................................................................................................................... 11 5. Measurement Uncertainty ........................................................................................................... 12 6. Device Under Test (DUT) Information ........................................................................................ 13 6.1. DUT Description ......................................................................................................................... 13 6.2. Wireless Technologies ............................................................................................................... 13 6.3. Nominal and Maximum Output Power ........................................................................................ 14 6.4. General LTE SAR Test and Reporting Considerations .............................................................. 15 7. RF Exposure Conditions (Test Configurations) ........................................................................ 16 8. Dielectric Property Measurements & System Check ................................................................ 17 8.1. Dielectric Property Measurements .............................................................................................. 17 8.2. System Check............................................................................................................................. 20 9. Conducted Output Power Measurements .................................................................................. 22 9.1. GSM ........................................................................................................................................... 22 9.2. W-CDMA .................................................................................................................................... 24 9.3. LTE ............................................................................................................................................. 28 9.4. Wi-Fi DTS (2.4 GHz) Band ......................................................................................................... 33 9.5. Bluetooth .................................................................................................................................... 33 10. Measured and Reported (Scaled) SAR Results ......................................................................... 34 10.1. GSM850 .................................................................................................................................. 36 10.2. GSM1900 ................................................................................................................................ 36 10.3. W-CDMA Band V .................................................................................................................... 37 10.4. W-CDMA Band II .................................................................................................................... 37 10.5. LTE Band 2 (10MHz Bandwidth)............................................................................................. 38 10.6. LTE Band 4 (10MHz Bandwidth)............................................................................................. 38 10.7. LTE Band 5 (10MHz Bandwidth)............................................................................................. 39 10.8. LTE Band 17 (10MHz Bandwidth)........................................................................................... 39 10.9. Wi-Fi (DTS Band) .................................................................................................................... 39 Report No.: 14I19561-S1 Issue Date: 1/30/2015 Page 4 of 45 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. 10.10. Bluetooth ................................................................................................................................. 40 11. SAR Measurement Variability ..................................................................................................... 41 12. Simultaneous Transmission SAR…

Text truncated - open the document above for the full version.

FCC 47 CFR PART 15 SUBPART C CERTIFICATION TEST REPORT FOR GSM/WCDMA/LTE PHONE + BLUETOOTH & 2.4GHz DTS b/g/n MODEL NUMBER: LG-L33L, LGL33L, L33L FCC ID: ZNFL33L REPORT NUMBER: 14I19561-E2 ISSUE DATE: JANUARY 2, 2015 Prepared for LG ELECTRONICS MOBILECOMM U.S.A., INC 1000 SYLVAN AVENUE ENGLEWOOD CLIFFS, NEW JERSEY, 07632, U.S.A Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 14I19561-E2 DATE: JANUARY 2, 2015 MODEL NUMBER: LG-L33L, LGL33L, L33L FCC ID: ZNFL33L Page 2 of 102 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By -- 01/02/15 Initial Issue D. Coronia REPORT NO: 14I19561-E2 DATE: JANUARY 2, 2015 MODEL NUMBER: LG-L33L, LGL33L, L33L FCC ID: ZNFL33L Page 3 of 102 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 5 2. TEST METHODOLOGY ..................................................................................................... 6 3. FACILITIES AND ACCREDITATION ................................................................................. 6 4. CALIBRATION AND UNCERTAINTY ................................................................................ 6 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 6 4.2. SAMPLE CALCULATION ............................................................................................ 6 4.3. MEASUREMENT UNCERTAINTY ............................................................................... 7 5. EQUIPMENT UNDER TEST ............................................................................................... 8 5.1. DESCRIPTION OF EUT .............................................................................................. 8 5.2. MAXIMUM OUTPUT POWER...................................................................................... 8 5.3. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................. 8 5.4. WORST-CASE CONFIGURATION AND MODE .......................................................... 9 5.5. DESCRIPTION OF TEST SETUP ...............................................................................10 6. TEST AND MEASUREMENT EQUIPMENT ......................................................................12 7. SUMMARY TABLE ...........................................................................................................13 8. ANTENNA PORT TEST RESULTS ...................................................................................14 8.1. 20 dB AND 99% BANDWIDTH ...................................................................................14 8.1.1. BASIC DATA RATE GFSK MODULATION ..........................................................14 8.1.2. ENHANCED DATA RATE 8PSK MODULATION .................................................14 20 dB AND 99% BANDWIDTH PLOTS ..............................................................................15 8.2. HOPPING FREQUENCY SEPARATION ....................................................................27 8.3. NUMBER OF HOPPING CHANNELS .........................................................................29 8.4. AVERAGE TIME OF OCCUPANCY............................................................................34 8.5. OUTPUT POWER.......................................................................................................41 8.5.1. BASIC DATA RATE GFSK MODULATION ..........................................................41 8.5.2. ENHANCED DATA RATE 8PSK MODULATION .................................................41 8.5.3. OUTPUT POWER PLOTS ...................................................................................42 8.6. AVERAGE POWER ....................................................................................................48 8.6.1. BASIC DATA RATE GFSK MODULATION ..........................................................48 8.6.2. ENHANCED DATA RATE 8PSK MODULATION .................................................48 8.7. CONDUCTED SPURIOUS EMISSIONS .....................................................................49 8.7.1. BASIC DATA RATE GFSK MODULATION ..........................................................50 ENHANCED DATA RATE 8PSK MODULATION ...............................................................58 REPORT NO: 14I19561-E2 DATE: JANUARY 2, 2015 MODEL NUMBER: LG-L33L, LGL33L, L33L FCC ID: ZNFL33L Page 4 of 102 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 9. RADIATED TEST RESULTS .............................................................................................66 9.1. LIMITS AND PROCEDURE ........................................................................................66 9.2. TRANSMITTER ABOVE 1 GHz ..................................................................................67 9.2.1. BASIC DATA RATE GFSK MODULATION ..........................................................67 9.2.2. ENHANCED DATA RATE 8PSK MODULATION .................................................80 9.3. WORST-CASE BELOW 1 GHz ...................................................................................93 10. AC POWER LINE CONDUCTED EMISSIONS ...................................…

Text truncated - open the document above for the full version.

REPORT NO: 14I19561-E2 DATE: JANUARY 2, 2015 MODEL NUMBER: LG-L33L, LGL33L, L33L FCC ID: ZNFL33L Page 101 of 102 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 11. SETUP PHOTOS RADIATED AND POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP RADIATED FRONT PHOTO (BELOW 1 GHz) RADIATED BACK PHOTO (BELOW 1 GHz) RADIATED FRONT PHOTO (ABOVE 1 GHz) RADIATED BACK PHOTO (ABOVE 1 GHz) LINE CONDUCTED FRONT PHOTO LINE CONDUCTED SIDE VIEW PHOTO REPORT NO: 14I19561-E2 DATE: JANUARY 2, 2015 MODEL NUMBER: LG-L33L, LGL33L, L33L FCC ID: ZNFL33L Page 102 of 102 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP AND RADIATED RF MEASUREMENT SETUP FOR PORTABLE CONFIGURATION ANTENNA PORT CONDUCTED PHOTO X-AXIS FRONT PHOTO Y-AXIS FRONT PHOTO Z-AXIS FRONT PHOTO END OF REPORT

Project no. 14I19561 DUT and SAR Set-up Photos Overall Dimensions 64.1 mm Earpiece 129.9mm 115mm 140mm Project no. 14I19561 Front View of the DUT Rear View of the DUT Project no. 14I19561 Setup Photos Handset Vertical and Horizontal Reference Lines Vertical Center Line Horizontal Line Project no. 14I19561 Head Exposure Conditions Left Touch Left Tilt (15°) Project no. 14I19561 Right Touch Right Tilt (15°) Project no. 14I19561 Body-worn Accessory & Hotspot mode Exposure Conditions Rear Front Project no. 14I19561 Hotspot Exposure Conditions Edge 1 Edge 2 Project no. 14I19561 Edge 3 Edge 4 Project no. 14I19561 Antenna Dimensions & Separation Distances