ZOJURBANMOBILE PHONE

MOBO USA CORP MOBILE PHONE F 2 C O N T E N T 1. WA R N IN G S ........................................................... 1 2. G E T T IN G STA R T E D ............................................. 2 3. YO U R P H O N E ...................................................... 3 1. P H O N E B O OK ....................................................... 5 2. M E SSAG E S ............................................................ 5 3. CA LL LO G S ........................................................... 7 4. IN T E R N E T ............................................................. 8 5. M ULT IM E D IA ....................................................... 7 6. FILE M A N AG E R ................................................... 8 7. SE T T IN G S .............................................................. 7 8. P R O FILE S ............................................................ 12 9. TO OLS .................................................................. 13 10. AP P LICAT IO N S ................................................ 13 11. OR GA N IZ E R ..................................................... 13 12. SH OR T C U TS ..................................................... 14 13. E N TR Y M O D E .................................................. 14 14. CA R E A N D M A IN T E NA N C E .......................... 15 15. T E C H N ICA L IN FOR MAT IO N ........................ 18 1 1. W arn in gs Not following these simple guidelines may be dangerous or illegal. Read the complete user guide for further information. SA FE T Y IN FO R M A T IO N O F LI-IO N B A T T E R Y C A U T IO N RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS T U R N O N SA FE LY Do not turn on the phone when wireless phone is prohibited or when it may cause interference or danger. R O A D SA FE T Y Obey all road safety laws. Always use both of your hands to operate the vehicle while driving. IN T E R FE R E N C E All wireless phones may be sensitive to interference, which may affect performance. T U R N O FF IN H O SP ITA LS Follow all restrictions. Turn off the phone near medical equipment. T U R N O FF O N A IR CR AFTS Follow all restrictions. Wireless devices can cause interference on aircrafts. T U R N O FF W H E N R E FU E LIN G Do not use the phone at/near refueling stations. 2 Do not use near fuel or chemicals. U SE SE N SIB LY Only qualified personnel may install or repair this product. E N H A N C E M E N TS A N D B AT T E R IE S Use only appropriate enhancements and batteries. Do not connect incompatible products. WAT E R-R E SISTA N C E Your phone is not water-resistant. Keep it dry. B ACK U P C O P IE S Remember to make back-up copies or keep a written record of all important information stored in your phone. C O N N E CT IN G TO OT H E R D E V IC E S When connecting to any external device, read its user guide for detailed safety instructions. Do not connect with incompatible products. 2. G ettin g Star ted 2.1 SIM Card In stalla tio n When you subscribe to a cellular network, you will receive a plug-in SIM card complete with your subscription details, such as your PIN, and available optional services. C au tio n: Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water, or dirt. T ip sFace the gold color contact point of SIM card towards the cell phone and push the SIM card into 3 the slot. 2.2 B a ttery In stalla tio n C au tio n: Install according to the illustration above to avoid breaking the battery connectors. 2.3 C h argin g th e B a ttery Insert the charger; the flash symbol on the charger plug must face upwards. Connect the charger to a standard wall outlet and the battery power icon in the up-right corner of the screen will start scrolling. When the battery bar stops scrolling, the battery charge is complete. Press the two sides of the charger plug and disconnect the charger from the phone. 2.4 T-flash C ard Insert the T-Flash card into phone. This will expand the Flash memory of the phone. Tap Multimedia menu, you can browse MP3, MP4, picture, etc. 2.5 U SB C ab le You can transfer and store files, such as MP3, MP4 and pictures from PC, through USB cable, to the U-disk in phone or identified SD card that is inserted. 3. Y o u r P h o n e 3.1 M a kin g a C all In standby mode, press numerical keys to input phone number to dial phone number. When you finish inputting phone number, press the dial key, 4 SIM2 key to make a call. If you're making a long distance call, add the area code preceding the telephone number. During a call, you can press up/down keys to adjust volume. Press left soft key to access Options. 3.2 E m ergen cy Service You can dial an emergency call without the SIM card. Contact your service provider to get the emergency call number. 3.3 A n swerin g a C all When you receive a call, the phone will ring or vibrate and will display an incoming call indicator. Press the dial key, SIM2 key or left soft key to answer. Press left soft key to access options. 3.4 R ejectin g/E n d in g a C all Press end key to reject an incoming call or end current call. 3.5 K eyp ad D efin i tio n ·Left soft key: To confirm; execute functions left-down corner indicator shows ·Right soft key: To delete a letter or return to upper menu; execute functions right-down corner indicator shows ·Navigation keys: To move cursor up, down, left, right or select letters; to enter shortcuts directly ·OK key: To confirm ·Dial key: Dial the number or answer calls ·End key: Cancel or reject calls; by long pressing 5 can turn on/off the phone ·SIM2 key: Dial the number or answer calls ·Media key: To enter into media menu. ·* key: long key pressswitch and input + P W; Show symbol list in editing mode ·# key: Switch user profiles in standby mode; switch input method in editing mode ·Number keys: Input the numbers or letters they represent. ·Torch light key: In standby mode, long pressing number 0 …

Text truncated - open the document above for the full version.

Jul.04, 2011 Federal Communication Commission Authorization and Evaluation Division FCC ID: ZOJURBAN Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Operational Description 4: Parts List 5.Tune up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, MOBO USA CORP Contact person: Marcelo A Barniquel Title: Manager Tel: 305-591-0324

MOBO USA CORP 6000 NW 97 AV unit 14 Miami Florida 33178 USA Tel: 305 591 0324; FAX: 305 591 7228 Date: Jul. 15, 2011 Statement We, MOBO USA CORP states that our device, FCC ID: ZOJURBAN, has no space to put the label except the battery compartment of this device. It is visible to the users as they purchase the products and install the battery. Sincerely yours,

TOP VIEW OF SAMPLE BOTTOM VIEW OF SAMPLE LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE FRONT VIEW OF SAMPLE BACK VEIW OF SAMPLE

FCC ID Label Placement MOBILE PHONE Model: URBAN MOBO FCC ID: ZOJURBAN Made In China

OPEN VIEW OF SAMPLE-1 OPEN VIEW OF SAMPLE-2 GSM Antenna OPEN VIEW OF EUT-3 INTERNAL VIEW OF SAMPLE – 1 Bluetooth Antenna INTERNAL VIEW OF SAMPLE – 2

Report No：117S056R-HP-US-P03V01 Page: 1 of 96 SAR Test Report Product Name : MOBILE PHONE Model No. : URBAN Applicant : MOBO USA CORP Address : 6000 NW 97 AV unit 14 Miami Florida 33178 USA Date of Receipt : 14/07/2011 Date of Test : 16/07/2011 Issued Date : 18/07/2011 Report No. : 117S056R-HP-US-P03V01 Report Version : V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of Quie Tek Corporation. Report No：117S056R-HP-US-P03V01 Page: 2 of 96 Test Report Certification Issued Date: 18/07/2011 Report No: 117S056R-HP-US-P03V01 Product Name : MOBILE PHONE Applicant : MOBO USA CORP Address : 6000 NW 97 AV unit 14 Miami Florida 33178 USA Manufacturer : SHENZHEN KENXINDA TECHNOLOGY CO., LTD. Address : 1-6F, No.105 Work Shop & 1-5 F, No.104 Work Shop , Xinwei Huaning Rd., Dalang Community, Dalang Strret, Baoan District Model No. : URBAN Brand Name : MOBO EUT Volt age : DC 3.7V Applicable Standard : FCC Oet65 Supplement C June 2001 IEEE Std. 1528-2003,47CFR § 2.1093 Test Result : Max. SAR Measurement (1g) Head: 0.339 W/kg Body: 0.778 W/kg Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Robin Wu) Approved By : (Engineering Supervisor: Marlin Chen) Report No：117S056R-HP-US-P03V01 Page: 3 of 96 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No：117S056R-HP-US-P03V01 Page: 4 of 96 TABLE OF CONTENTS Description Page 1. General Information ................................................................................................. 6 1.1. EUT Description .................................................................................................. 6 1.2. Test Environment ................................................................................................. 7 2. SAR Measurement System ...................................................................................... 8 2.1. DASY5 System Description ................................................................................. 8 2.1.1. Applications ..................................................................................................... 9 2.1.2. Area Scans ...................................................................................................... 9 2.1.3. Zoom Scan (Cube Scan Averaging) ................................................................ 9 2.1.4. Uncertainty of Inter-/Extrapolation and Averaging ........................................... 9 2.2. DASY5 E-Field Probe ........................................................................................ 10 2.2.1. Isotropic E-Field Probe Specification ............................................................. 10 2.3. Boundary Detection Unit and Probe Mounting Device ...................................... 11 2.4. DATA Acquisition Electronics (DAE) and Measurement Server ........................ 11 2.5. Robot ................................................................................................................. 12 2.6. Light Beam Unit ................................................................................................. 12 2.7. Device Holder .................................................................................................... 13 2.8. SAM Twin Phantom ........................................................................................... 13 3. Tissue Simulating Liquid ....................................................................................... 14 3.1. The composition of the tissue simulating liquid ................................................. 14 3.2. Tissue Calibration Result ................................................................................... 15 3.3. Tissue Dielectric Parameters for Head and Body Phantoms ............................. 16 4. SAR Measurement Procedure ............................................................................... 17 4.1. SAR System Validation ...................................................................................... 17 4.1.1. Validation Dipoles .......................................................................................... 17 4.1.2. Validation Result ............................................................................................ 18 4.2. SAR Measurement Procedure .............................................................…

Text truncated - open the document above for the full version.

FCC Test Report Report No.: AGC00L110613F2A FCC ID : ZOJURBAN PRODUCT DESIGNATION : MOBILE PHONE BRAND NAME : MOBO TEST MODEL : URBAN CLIENT : MOBO USA CORP DATE OF ISSUE : July 8, 2011 STANDARD(S) : FCC Part 22H & 24E Rules Attestation of Global Compliance Co., Ltd. CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC00L110613F2A Page 1 of 50 VERIFICATION OF COMPLIANCE Applicant: MOBO USA CORP 6000 NW 97 AV unit 14 Miami Florida 33178 USA Manufacturer: SHENZHEN KENXINDA TECHNOLOGY CO., LTD (BAO’AN BRANCH) 1-6 FLOOR, NO.105 WORK SHOP & 1-5 FLOOR, NO.104 WORK SHOP, XINWEIHUANING ROAD, DALANG COMMUNITY, DALANG STREET, BAO’AN DISTRICT, SHENZHEN P.R.CHINA Product Description: MOBILE PHONE Brand Name: MOBO Model Name: URBAN FCC ID: ZOJURBAN Report Number: AGC00L110613F2A Date of Test: July 2, 2011 to July 7, 2011 We hereby certify that: The above equipment was tested by Attestation of Global Compliance Co., Ltd. The data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C 63.4:2003 and TIA/EIA 603. The sample tested as described in this report is in compliance with the FCC Rules Part 22H and 24E The test results of this report relate only to the tested sample identified in this report. Checked By: Curoky Chen July 8, 2011 Authorized By Forrest Lei July 8, 2011 Report No.: AGC00L110613F2A Page 2 of 50 TABLE OF CONTENTS 1. GENERAL INFORMATION ............................................................................................................................. 4 1.1 PRODUCT DESCRIPTION ............................................................................................................................ 4 1.2 RELATED SUBMITTAL(S) / GRANT (S) ........................................................................................................ 4 1.3 TEST METHODOLOGY ................................................................................................................................. 4 1.4 TEST FACILITY ............................................................................................................................................. 5 1.5 MEASUREMENT INSTRUMENTS ................................................................................................................ 5 1.6 SPECIAL ACCESSORIES ............................................................................................................................. 5 1.7 EQUIPMENT MODIFICATIONS .................................................................................................................... 5 2. SYSTEM TEST CONFIGURATION ................................................................................................................. 6 2.1 EUT CONFIGURATION ................................................................................................................................. 6 2.2 EUT EXERCISE ............................................................................................................................................. 6 2.3 GENERAL TECHNICAL REQUIREMENTS ................................................................................................... 6 2.4 CONFIGURATION OF EUT SYSTEM .......................................................................................................... 6 3. SUMMARY OF TEST RESULTS ..................................................................................................................... 7 4. DESCRIPTION OF TEST MODES .................................................................................................................. 7 5. OUTPUT POWER ............................................................................................................................................ 8 5.1 CONDUCTED OUTPUT POWER .................................................................................................................. 8 5.2 RADIATED OUTPUT POWER ..................................................................................................................... 10 6. SPURIOUS EMISSION .................................................................................................................................. 12 6.1 CONDUCTED SPURIOUS EMISSION ........................................................................................................ 12 6.2 RADIATED SPURIOUS EMISSION ............................................................................................................. 14 7. CONDUCTED EMISSION .............................................................................................................................. 17 7.1 MEASUREMENT METHOD ......................................................................................................................... 18 7.2 PROVISIONS APPLICABLE ........................................................................................................................ 18 Report No.: AGC00L110613F2A Page 3 of 50 7.3 MEASUREMENT RESULT .......................................................................................................................... 18 8. FREQUENCY STABILITY ............................................................................................................................. 21 8.1 MEASUREMENT METHOD ......................................................................................................................... 21 8.2 PROVISIONS APPLICABLE ........................................................................................................................ 21 8.3 MEASUREMENT RESULT .......................................................................................................................... 22 9. OCCUPIED BANDWIDTH .............................................................................…

Text truncated - open the document above for the full version.

CONDUCTED EMISSION RADIATED SPURIOUS EMISSION