ZPKSG6000-G5150FIREWALL APPLIANCE

Hillstone SG-6000 Series Firewall Appliance Installation Manual Hillstone Networks Inc. SG-6000-IM0511-4.0R4E-03 Hillstone SG-6000 Series Firewall Appliance Installation Manual Name and Concentration of Toxic or Hazardous Substances and Elements in Products Toxic or hazardous substances and elements Component Lead Mercury Cadmium Cr6+ PBB PDBE Metal parts (including fasteners) ² | | | | | Printed circuit board assemblies and components ² | | | | | Cables and cable assemblies ² | | | | | Plastics and Polymers ² | | | ² ² Electric components other than circuit boards ² | | | | | |: Indicates that the specified substance in the component is below the limit defined in the Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products (SJ/T11363-2006) issued by the Ministry of Information Industry of PRC. ²： Indicates that the substance in one or more components exceeds the limits specified in the Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products (SJ/T11363-2006) issued by the Ministry of Information Industry of PRC. Note: Not all components above are included in one product. This symbol indicates the environmental cycles of all products and components. This cycle applies only to the normal operation conditions specified in this manual. Hillstone SG-6000 Series Firewall Appliance Installation Manual Preface About This Manual Thanks for choosing the network security products from Hillstone Networks, Inc. This document is an installation manual for Hillstone SG-6000 Series firewall appliance to help you install the Hillstone SG-6000 Series firewall appliance properly. This manual includes the following chapters: • Chapter 1. Introduction • Chapter 2. Pre-installation Preparations • Chapter 3. Installation • Chapter 4. Boot and Configuration • Chapter 5. Hardware Maintenance and Replacement • Chapter 6. Troubleshooting Document Conventions This manual uses the following conventions for your convenience to read and understand: • Warning: Indicates improper operation that may cause serious damage to equipment or injury to operators. Thus, operators must strictly follow the operating rules. • Caution: Indicates incorrect operation that may affect the normal use of the equipment. Operators should be careful. • Note: Indicates information that may help readers understand the content. Hillstone SG-6000 Series Firewall Appliance Installation Manual Table of Contents Chapter 1 Introduction.................................................................................. 1 Overview.......................................................................................................... 1 Features........................................................................................................... 1 Innovative Multi-core Plus ® G2 Security Architecture............................................ 1 Modularized Design........................................................................................ 2 Hardware Overview............................................................................................ 2 Front Panel.................................................................................................... 2 Back Panel.................................................................................................... 8 LED Indicators............................................................................................. 11 System Parameters...................................................................................... 13 Ports.......................................................................................................... 17 CLR Button.................................................................................................. 21 Expansion Slot............................................................................................. 22 SD Card Slot................................................................................................ 22 Power Supply............................................................................................... 23 Expansion Module............................................................................................ 25 Chapter 2 Pre-installation Preparations....................................................... 26 Introduction.................................................................................................... 26 Cleanness Requirements................................................................................... 26 Electrostatic Discharge Prevention...................................................................... 26 Electromagnetic Interference Prevention............................................................. 26 Grounding Requirements................................................................................... 27 Workbench Requirements.................................................................................. 27 Other Safety Recommendations......................................................................... 27 Unpacking....................................................................................................... 28 Installation Devices, Tools, and Cables................................................................ 28 Chapter 3 Installation.................................................................................. 29 Before Installation............................................................................................ 29 Installing the Appliance on a Workbench.............................................................. 29 Installing the Appliance on a Rack...................................................................... 30 Connecting Cables............................................................................................ 31 Connecting the Ground Wire.......................................................................…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 HILLSTONE NETWORKS, INC. 2011-06-27 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, HILLSTONE NETWORKS, INC. hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product：FIREWALL APPLIANCE Model：SG-6000-G5150, SG-6000-G3150 FCC ID: ZPKSG6000-G5150 We affirm that between SIEMIC and HILLSTONE NETWORKS, INC. , any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature Client’s name / title Yahong Wei / Project Manager Contact information / address TEL：+86(10)8289-7229 x 8093 FAX：+86(10)8289-9814 E-mail：[email protected] Address：3F Hui-Zhong Plaza, No. 1 ShangDi 7th Street, Haidian, Beijing, P.R China 100085

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 1.0 2.0 August – 11 - 2008 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 2.0 HILLSTONE NETWORKS, INC. 2011-07-08 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: ZPKSG6000- G5150 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title Yahong Wei / Project Manager Contact information / address TEL：+86(10)8289-7229 x 8093 FAX：+86(10)8289-9814 E-mail：[email protected] Address：3F Hui-Zhong Plaza, No. 1 ShangDi 7th Street, Haidian, Beijing, P.R China 100085

HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 APPENDIX B - EUT PHOTOGRAPHS EUT - Rear View 1 EUT - Rear View 2 REPORT NO.:MTI1100620002RF FCC PART 15B HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 EUT - Rear View 3 EUT - Rear View 4 REPORT NO.:MTI1100620002RF FCC PART 15B HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 REPORT NO.:MTI1100620002RF FCC PART 15B EUT - Rear View 5 EUT - Rear View 6

HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 APPENDIX A - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: ZPKSG6000-G5150 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Specifications : Text is Black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. REPORT NO.:MTI1100620002RF FCC PART 15B

HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 Proposed Label Location on EUT FCC ID Label Location REPORT NO.:MTI1100620002RF FCC PART 15B HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 REPORT NO.:MTI1100620002RF FCC PART 15B

HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 REPORT NO.:MTI1100620002RF FCC PART 15B APPENDIX C - EUT INTERNAL PHOTOGRAPHS EUT – Open View EUT –Optical Port View HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 REPORT NO.:MTI1100620002RF FCC PART 15B EUT – RJ45 Port View EUT – Hard discs View HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 REPORT NO.:MTI1100620002RF FCC PART 15B EUT – SFP View EUT – PCB View 1 HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 REPORT NO.:MTI1100620002RF FCC PART 15B EUT – PCB View 2 EUT – PCB View 3 HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 REPORT NO.:MTI1100620002RF FCC PART 15B EUT – PCB View 4 EUT – PCB View 5 HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 REPORT NO.:MTI1100620002RF FCC PART 15B EUT – PCB View 6 EUT – PCB View 7 HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 REPORT NO.:MTI1100620002RF FCC PART 15B EUT – PCB View 8

FCC Part 15B Measurement And Test Report For HILLSTONE NETWORKS, INC. 3F Hui-Zhong Plaza, No. 1 ShangDi 7th Street, Haidian, Beijing, P.R China 100085 Model: SG-6000-G5150, SG-6000-G3150 . This Report Concerns: Original Report Equipment Type: FIREWALL APPLIANCE Report Number: MTI110620002RF Test Engineer: Reviewed By: Approved & Authorized By: Test Date: June 20-27,2011 Prepared By: MTI Technology Laboratory Ltd． 10F, Yinxing Business Hotel, Xixiang Road, Bao'an District, Shenzhen, P,R.China. Tel: +86-755-8885 0135 Fax: +86-755-8885 0136 Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior written consent of MTI Technology Laboratory Ltd． Report No.：MTI110620002RF Page 2 of 15 1. GENERAL INFORMATION......................................................................................................................... 3 TABLE OF CONTENTS 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)........................................................................................3 1.2 RELATED SUBMITTAL(S) / GRANT (S) .............................................................................................................................3 1.3 TEST METHODOLOGY..................................................................................................................................................3 1.4 TEST FACILITY............................................................................................................................................................3 2. SYSTEM TEST CONFIGURATION............................................................................................................ 5 2.1 EUT CONFIGURATION..................................................................................................................................................5 2.2 EUT EXERCISE...........................................................................................................................................................5 2.3 GENERAL TEST PROCEDURES......................................................................................................................................5 2.4 ACCESSORIES EQUIPMENT LIST AND DETAILS................................................................................................................5 2.5 EUT CABLE LIST AND DETAILS.....................................................................................................................................5 2.6 LIST OF MEASURING EQUIPMENTS USED.......................................................................................................................6 3. SUMMARY OF TEST RESULTS................................................................................................................ 7 4. CONDUCTED EMISSION MEASUREMENT............................................................................................. 8 4.1 LIMITS OF CONDUCTED EMISSION.................................................................................................................................8 4.2 TEST SETUP DIAGRAM.................................................................................................................................................8 4.3 INSTRUMENT SETTING..................................................................................................................................................8 4.4 TEST EQUIPMENT LIST AND DETAILS.............................................................................................................................9 4.5 TEST PROCEDURE.......................................................................................................................................................9 4.6 TEST PROCEDURE.......................................................................................................................................................9 4.7 TEST RESULT..............................................................................................................................................................9 5. RADIATED EMISSION MEASUREMENT................................................................................................ 12 5.1 LIMITS OF RADIATED EMISSION MEASUREMENT............................................................................................................12 5.2 EUT SETUP..............................................................................................................................................................12 5.3 TEST EQUIPMENT LIST AND DETAILS...........................................................................................................................12 5.4 TEST PROCEDURE.....................................................................................................................................................13 5.5 TEST PROCEDURE.....................................................................................................................................................13 5.6 TEST RESULT............................................................................................................................................................13 Report No.：MTI110620002RF Page 3 of 15 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Applicant: HILLSTONE NETWORKS, INC. Address of applicant: 3F Hui-Zhong Plaza, No. 1 ShangDi 7th Street, Haidian, Beijing, P.R China 100085 Manufacturer: HILLSTONE NETWORKS, INC. Address of manufacturer: 3F Hui-Zhong Plaza, No. 1 ShangDi 7th Street, Haidian, Beijing, P.R China 100085 Equipment Under Test: FIREWALL APPLIANCE Tested Model No.: SG-6000-G5150 Supplementary Models No: SG-6000-G3150 Remark: supplementary models are only different in exterior with tested Model and with the same circuit construction. Trade Name: HILLSTONE FCC ID: ZPKSG6000-G5150 Type of Modulation: / Power Supply: 1…

Text truncated - open the document above for the full version.

HILLSTONE NETWORKS, INC. Model: SG-6000-G5150 APPENDIX D - TEST SETUP PHOTOGRAPHS Maximized Radiated Emission Test Set-up View Maximized Conducted Emission Test Set-up Veiw REPORT NO.:MTI1100620002RF FCC PART 15B