ZT7-CVM-APMODEM FOR CONNECTING TO WIRELESS SENSOR NETWORK

FCC ID: ZT7-CVM-AP (IC: 9802A-CVMAP) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix F User Manual Disclaimer Although every effort has been made to ensure the accuracy of the information contained in this document, MIPAC Pty Ltd makes no warranty, expressed or implied, with respect to the quality, correctness, reliability, currency, accuracy, or freedom from error of this document or the products it describes. MIPAC Pty Ltd may make improvements and/or changes to the products and services described in this document at any time. MIPAC Pty Ltd disclaims all liability for any direct, indirect, incidental, consequential, special, or exemplary damages resulting from the use of the information in this document or from the use of any products described in this document. Mention of any other product not owned by MIPAC does not constitute an endorsement of that product by MIPAC Pty Ltd. Data used in examples and sample data files are intended to be fictional and any resemblance to real persons or companies is entirely coincidental. Persons reading this document should rely on their own enquiries in making any decisions touching on their own interests. Licence Agreement The software described in this guide is supplied under a Licence agreement and may only be used in accordance with the terms of that agreement. Copyright Information © 2011 MIPAC Pty Ltd. All rights reserved. Apart from any use permitted under the Copyright Act, no part may be reproduced by any process without the written permission of MIPAC Pty Ltd, PO Box 3129 Hendra 4011, Queensland, Australia. The following is a trademark of MIPAC Pty Ltd: CellView Œ The following are third party trademarks used in this document: Microsoft is a registered trademark and Windows is a trademark of Microsoft Corporation in the USA and other countries. FrontPage and Internet Explorer are trademarks of Microsoft. PostScript and Acrobat Reader are trademarks of Adobe Systems Incorporated. UNIX is a registered trademark of The Open Group. InstallShield is a registered trademark of InstallShield Software Corporation. Java is a trademark of Sun Microsystems, Inc. Revisions Rev Date By Description Checked Approved A 25/10/2008 Preliminary Issue for Comment B 10/05/2009 Issued for Final Approval TJH AJM 0 03/07/2009 Published AJM 1 04/09/2009 Minor Changes - Published TJH AJM 2 03/09/2011 MPS Minor Changes TJH Table of Contents System Engineering Manual for CellView © V1.00 i TABLE OF CONTENTS WHO SHOULD READ THIS GUIDE IV BEFORE BEGINNING IV HOW THIS GUIDE IS STRUCTURED V CONVENTIONS USED IN THIS GUIDE VI DEFINITION OF TERMS USED IN THIS GUIDE VII INTRODUCTION TO CELLVIEW 1 NETWORK PLANNING 2 Introduction 2 Network Setup 2 Default network setup 4 Example Network Setup 5 Network Cautions 6 Planning the Mesh Router Wireless channels 7 Planning CellView Channels 8 Planning the CellView Channel(s) 9 Design Example for the CellView Network 11 SYSTEM SOFTWARE INSTALLATION 12 Operating System Installation 12 DHCP Server Setup 12 Create a Data Share on the CellView Server 21 Enable Remote Desktop on CellView server (if necessary) 24 Server Desktop Setup 25 Activesync Installation 25 Acrobat Reader Installation 25 Putty Installation and Setup 26 OPC Server Installation 27 Installation of Mesh Router Manager Software 31 Microsoft SQL Server Manager Studio 31 Installation of Matrikon OPC Explorer 34 MESH ROUTER CONFIGURATION 38 Mesh Router Pre-Setup 38 Mesh Router Network Setup 39 Mesh Router Interfaces Setup 41 Mesh Router Mesh Routing Setup 44 Wired Mesh Router Setup 45 AP Radio ID Identification 46 PDA CONFIGURATION 47 Preparation Required before Setup 48 Table of Contents ii System Engineering Manual for CellView © V1.00 CellView Network Settings for PDA 49 Trouble Shooting the CellView PDA 50 OPC SERVER CONFIGURATION 51 Introduction 51 Provisioning the Network 52 Provisioning File Settings and Considerations 53 Modifying System Settings for an Existing System 54 Provisioning Mesh Routers 54 Provisioning Cell Monitors and Cell Monitor Groups 58 Additional Provisioning File Lines 61 Example Provisioning File 61 CELLVIEW SETUP APPLICATION 62 Common 62 CellView Setup Main screen 62 Settings Screen 63 Pending Tags Screen 64 Cell Monitor List Screen 64 Access Points Screen 66 Provision Tab 67 Database Restore and Backup 67 List Editor Tab 68 COMMISSIONING 70 Commissioning check list 70 Commissioning process 71 CELL MONITOR INSTALLATION 74 DISCLAIMER 74 Selecting Cell Monitor Locations 74 Mounting Procedures 74 Material Considerations 75 Adhesive 76 Gel Coat 76 cPVC Cleaner 76 Purchasing Considerations 77 MESH ROUTER INSTALLATION 78 General 78 Mesh Router Installation requirements 78 Mesh Router Power Cable Installation 79 Mesh Router Network Cable Installation 79 Powering the Mesh Router on for the First Time 81 Mesh Router Trouble Shooting 81 Table of Contents System Engineering Manual for CellView © V1.00 iii COMPLIANCE INFORMATION 82 Cell Monitor 82 AP Radio 84 Mesh Router 85 SERVER HARDWARE REQUIREMENTS 86 Baseline Requirements for CellView Server 86 Preface System Engineering Manual for CellView © V1.00 iv Who Should Read this Guide This guide is aimed at system engineers and administrators responsible for the installation and maintenance of a CellView environment. It provides a technical overview of the CellView architecture, as well as detailed installation and usage instructions. Before Beginning This guide assumes that the reader has experience in using: ‡0LFURVRIW:LQGRZV ‡0LFURVRIW:LQGRZVVHUYHUV It is also assumed that the reader has a working knowledge of: ‡64/ database ‡23& Preface System Engineering Manual for CellView © V1.00 v How this Guide is Structured x Chapter 1, Introduction to CellView x Chapter 2, Mesh Network Planning x Chapter 3, System Software Installation x C…

Text truncated - open the document above for the full version.

EMC Technologies Pty Ltd, 176 Harrick VIC 3043 Australia Ph: +613 9365 1000 Fax: +613 9331 7455 www.emctech.com.au EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road, Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: [email protected] To: Federal Communications Commission Attention: Certification Manager No. of pages: 1 From: Chieu Huynh Date: 17 th November 2011 EMC Ref: M111018_Cert Subject: FCC MODULAR APPROVAL – FCC ID: ZT7-CVM-AP Please receive EMC Technologies’ Report M111018_Cert for review. The EUT is Wireless Access Point Radio, model number: CVM-AP-R02. The intention of this application is to FCC certify (modular approval) the Wireless Access Point Radio to FCC 15.249. EMC Technologies Pty Ltd is acting as agent for Mipac Pty Ltd during this product approval. The FCC ID for this application is ZT7-CVM-AP Regards ______________ Chieu Huynh Senior EMC Engineer EMC Technologies Pty Ltd

FCC ID: ZT7-CVM-AP (IC: 9802A-CVMAP) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A1 – External Photos FCC ID: ZT7-CVM-AP (IC: 9802A-CVMAP) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A1 – External Photos

FCC ID: ZT7-CVM-AP (IC: 9802A-CVMAP) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix E Labeling Details

FCC ID: ZT7-CVM-AP (IC: 9802A-CVMAP) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A2 – Internal Photos Zoom – Without RF Shield

Page 1 of 16 EMI TEST REPORT FOR CERTIFICATION (MODULAR APPROVAL) to FCC PART 15 Subpart C (Section 15.249) & RSS-210 FCC ID: ZT7-CVM-AP IC: 9802A-CVMAP Test Sample: Wireless Access Point Radio Model Number: CVM-AP-R02 Report Number M111018_Cert Tested for: Mipac Pty Ltd Issue Date: 17 th November 2011 EMC Technologies Pty Ltd reports apply only to the specific samples tested under stated test conditions. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. EMC Technologies Pty Ltd shall have no liability for any deductions, inferences or generalisations drawn by the client or others from EMC Technologies Pty Ltd issued reports. This report shall not be used to claim, constitute or imply product endorsement by EMC Technologies Pty Ltd. Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3 EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: [email protected] FCC ID: ZT7-CVM-AP (IC: 9802A-CVMAP) Report No. M111018_Cert Page 2 of 16 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3 EMI TEST REPORT FOR CERTIFICATION (MODULAR APPROVAL) to FCC PART 15 Subpart C (Section 15.249) & RSS-210 EMC Technologies Report No. M111018_Cert Issue Date: 17 th November 2011 CONTENTS 1.0 INTRODUCTION 2.0 GENERAL INFORMATION 3.0 CONDUCTED EMISSION MEASUREMENTS 4.0 RADIATED EMISSION MEASUREMENTS 5.0 ANTENNA REQUIREMENT 6.0 COMPLIANCE STATEMENT 7.0 MEASUREMENT UNCERTAINTIES 8.0 MEASUREMENT INSTRUMENT APPENDIX A: PHOTOGRAPHS APPENDIX B: BLOCK DIAGRAM APPENDIX C: SCHEMATICS APPENDIX D: OPERATIONAL DESCRIPTION APPENDIX E: FCC LABELLING DETAILS APPENDIX F: USER MANUAL APPENDIX G: ANTENNA DETAILS FCC ID: ZT7-CVM-AP (IC: 9802A-CVMAP) Report No. M111018_Cert Page 3 of 16 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3 EMI TEST REPORT FOR CERTIFICATION (MODULAR APPROVAL) to FCC PART 15 Subpart C (Section 15.249) & RSS-210 Report Number: M111018_Cert Test Sample: Wireless Access Point Radio Model Number: CVM-AP-R02 Serial Number: 400 Part number: 0088-04 Manufacturer: Syndetic Pty Ltd FCC ID: ZT7-CVM-AP IC: 9802A-CVMAP Equipment Type: Intentional Radiator Tested for: Mipac Pty Ltd Address: 39 Navigator Place, Hendra, QLD 4011, Australia Phone: +61 7 3212 5600 Fax: +61 7 3212 5699 Contact: Tony Mathison Responsible Party: Ross Varnes Email: [email protected] Test Standards: FCC Part 15, Subpart C – Intentional Radiators Section 15.249: Operation within the bands 902 – 928 MHz, 2400 – 2483.5 MHz, 5725 – 5875 MHz and 24.0 – 24.25 GHz. ANSI C63.4 – 2009 RSS-210 Issue 8, Licence-Exempt Radio Apparatus Annex 2, A2.9: bands 902 – 928 MHz, 2400 – 2483.5 MHz and 5725 – 5875 MHz RSS-Gen Issue 3, General Requirements and Information for the Certification of Radiocommunication Equipment Test Dates: 17 th October to 16 th November 2011 Test Engineer: Chieu Huynh Attestation: I hereby certify that the device(s) described herein were tested as described in this report and that the data included is that which was obtained during such testing. Authorised Signatory: Chieu Huynh EMC Technologies Pty Ltd Issued by EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au FCC ID: ZT7-CVM-AP (IC: 9802A-CVMAP) Report No. M111018_Cert Page 4 of 16 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3 EMI TEST REPORT FOR CERTIFICATION (MODULAR APPROVAL) to FCC PART 15 Subpart C (Section 15.249) & RSS-210 1.0 INTRODUCTION EMI testing was performed on the Wireless Access Point Radio, model number: CVM-AP-R02. The test sample complied with the requirements of 47 CFR, Part 15 Subpart C - Section 15.249. The test sample also complied with the Industry Canada RSS-210 and RSS-Gen. 1.1 Summary of Results Test results and procedures were performed in accordance with the following Federal Communications Commission (FCC) and Industry Canada standards/regulations. FCC Part 15, Subpart C Industry Canada RSS-210 and RSS-Gen Test Performed Result 15.203 RSS-Gen (7.1.2) Antenna Requirement Complied 15.207 RSS-Gen (7.2.4) Conducted Emissions Not Applicable 15.209 RSS-Gen (7.2.5) Radiated Emissions Complied 15.249 (a) A2.9(a) Fundamental Field Strength Complied 15.249 (a) A2.9(a) Harmonics Emissions Complied 15.249 (b) Fixed, point to point Not Applicable 15.249 (c) A2.9(a) Field strength limits…

Text truncated - open the document above for the full version.

FCC ID: ZT7-CVM-AP (IC: 9802A-CVMAP) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A3 – Test Set-up Photos Test Set-up below 30 MHz FCC ID: ZT7-CVM-AP (IC: 9802A-CVMAP) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A3 – Test Set-up Photos Test Set-up below 1 GHz FCC ID: ZT7-CVM-AP (IC: 9802A-CVMAP) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Appendix A3 – Test Set-up Photos Test Set-up above 1 GHz