ZTNKSR315ARemote Control

FCC ID: ZTNKSR315A FCC information to the user Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

D Operation Manual 1. Specification: 2. Appearance Drawing a. Working Indicator LED b. UP Button c. STOP Button d. DOWN Button FCC NOTES: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE:THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER＇S AUTHORITY TO OPERATE THE EQUIPMENT. MODEL: KSR315A Operating Frequency 315MHz Operating Mode ASK Operating Current <20mA(6VDC) Supply Voltage Rang 4.8V~6V Baud Rate <1KB/S Rated Power <10dBm Antenna Type PCB Antenna Gain 1dBi Power Supply Type By Battery Operating Temperature -10°C~60°C Store Temperature -40°C~80°C

BSSB Leather & Fabric Beds Sdn. Bhd. Authorization Letter Number: CF101 Version: V01 Date: 01-02-2010 We, (the approval holder) Company name BSSB Leather & Fabric Beds Sdn. Bhd. Addresss Lot 8962, Jalan Udang Galah, Telok Gong, 42000 Port Klang, City Selangor, Darul Ehsar, Country Malaysia declare that the following representative (agent): Name (person) Daniel Zhu Company name Anbotek Compliance Laboratory Limited Addresss 1/F, 1 /Build, SEC Industrial Park, No. 4 Qianhai Road, Nanshan District City Shenzhen Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description Remote Control Type or Model(s) KSR315A Tradename or Brand(s) N/A We also authorize Teleconformity (Mr. M. Koop, Manager Certification, Address: Rietven 31, 7534NH Enschede, The Netherlands) to apply and sign this application for certification, registration or filing on our behalf (as representative agent or certifier). Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Selangor, Malaysia 2011-7-18 Howard Obbard Director

BSSB Leather & Fabric Beds Sdn. Bhd. FCC Confidentiality Request Number: CF303 Version: V02 Date:17-06-2011 To: Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name BSSB Leather & Fabric Beds Sdn. Bhd. Address Lot 8962, Jalan Udang Galah, Telok Gong, 42000 Port Klang, City Selangor, Darul Ehsar, Country Malaysia request for this certification filing under: Grantee Code Product Number FCC ID: ZTN KSR315A to maintain permanent confidentiality for the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) Exhibit File Name Description √ Operational Description ZTNKSR315A _CircuitDescription.pdf Explains the functioning of the block diagram / EUT √ Block Diagrams ZTNKSR315A _BlockDiagram.pdf Shows the systematic building blocks of the EUT √ Schematics Diagrams ZTNKSR315A _SchematicDiagram.pdf Shows components, their values and how they are interconnected Bill of Materials Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Selangor, Malaysia 2011-7-18 Howard Obbard Director

Page 16 of 18 FCC ID: ZTNKSR315A Anbotek Compliance Laboratory Limited Report No.201107780F Figure 1 The EUT-Front View Figure 2 The EUT-Back View

FCC ID Label Sample for FCC ID: ZTNKSR315A FCC ID: ZTNKSR315A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

The proposed Label Location on EUT Proposed FCC ID Label Location , and the proposed length of FCC ID Label is 3.5cm. Proposed Label Location on EUT The EUT-Back View/Proposed FCC ID Label Location

Page 17 of 18 FCC ID: ZTNKSR315A Anbotek Compliance Laboratory Limited Report No.201107780F Figure 4 The EUT-Inside View Figure 5 PCB of the EUT-Front View Page 18 of 18 FCC ID: ZTNKSR315A Anbotek Compliance Laboratory Limited Report No.201107780F Figure 6 PCB of the EUT-Back View

Page 1 of 18 FCC ID: ZTNKSR315A Anbotek Compliance Laboratory Limited Report No.201107780F FCC TEST REPORT for BSSB Leather & Fabric Beds Sdn. Bhd. Remote Control Model No.: KSR315A Report Number : 201107780F Date of Test : Jul. 19~23, 2011 Date of Report : Jul. 27, 2011 Prepared for : BSSB Leather & Fabric Beds Sdn. Bhd. Address : Lot 8962, Jalan Udang Galah, Telok Gong, 42000 Port Klang, Selangor, Darul Ehsar, Malaysia Prepared By : Anbotek Compliance Laboratory Limited Address : 1/F, 1 /Building, SEC Industrial Park, No. 4 Qianhai Road, Nanshan District, Shenzhen, 518054, China Tel: (86) 755-26014771 Fax: (86) 755-26014772 Page 2 of 18 FCC ID: ZTNKSR315A Anbotek Compliance Laboratory Limited Report No.201107780F TABLE OF CONTENT Description Page Test Report 1. GENERAL INFORMATION .........................................................................................................4 1.1. Description of Device (EUT)....................................................................................................................4 1.2. Description of Test Facility ......................................................................................................................5 1.3. Measurement Uncertainty.........................................................................................................................5 1.4. Test Summary ...........................................................................................................................................5 2. MEASURING DEVICE AND TEST EQUIPMENT.................................................................... 6 3. TEST PROCEDURE ....................................................................................................................... 7 4. RADIATION INTERFERENCE.................................................................................................... 8 4.1. Requirements (15.231): ............................................................................................................................8 4.2 Test Procedure ...........................................................................................................................................8 4.3 Test Results................................................................................................................................................8 5. 20DB BANDWIDTH ..................................................................................................................... 10 5.1. Requirements (15.231): ..........................................................................................................................10 5.2. EUT Setup ..............................................................................................................................................10 5.3. Test Results.............................................................................................................................................10 6. DUTY CYCLE ............................................................................................................................... 12 6.1. EUT Setup ..............................................................................................................................................12 6.2. Test Procedure ........................................................................................................................................12 6.3. Measurement Result ...............................................................................................................................12 7. PHOTOGRAPH............................................................................................................................. 14 7.1. Photo of Radiation Emission Test ..........................................................................................................14 APPENDIX I (Photos of EUT) (3 Pages) Page 3 of 18 FCC ID: ZTNKSR315A Anbotek Compliance Laboratory Limited Report No.201107780F TEST REPORT Applicant : BSSB Leather & Fabric Beds Sdn. Bhd. Manufacturer : Dongguan Kitwell Electric Furniture Co. Ltd. EUT : Remote Control Model No. : KSR315A Serial No. : N/A Rating : DC 6V via Battery Trade Mark : N/A Measurement Procedure Used: FCC Part15 Subpart C, Paragraph 15.231 The device described above is tested by Anbotek Compliance Laboratory Limited to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Anbotek Compliance Laboratory Limited is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC Part 15 Subpart C requirements. This report applies to above tested sample only and shall not be reproduced in part without written approval of Anbotek Compliance Laboratory Limited Date of Test : Jul. 19~23, 2011 Prepared by : (Tested Engineer / Well Wang) Reviewer : (Project Manager / Coco Xiang) Approved & Authorized Signer : (Manager / Tom Chen) Page 4 of 18 FCC ID: ZTNKSR315A Anbotek Compliance Laboratory Limited Report No.201107780F 1. GENERAL INFORMATION 1.1. Description of Device (EUT) EUT : Remote Control Model Number : KSR315A Test Power Supply : DC 6V via 2 Pcs new (full) Lithium Cell Frequency : 315MHz Antenna : Gain is 1dBi (The device uses an integral PCB antenna which is not intended and easy to modify.) Applicant : BSSB Leather & Fabric Beds Sdn. Bhd. Address : Lot 8962, Jalan Udang Galah, Telok Gong, 42000 Port Klang, Selangor, Darul Ehsar, Malaysia Manufacturer : Dongguan Kitwell Electric Furniture Co. Ltd. Address : Shangkeng, Guan Li Qu, Changping, Dongguan, Guangdong, China Date of receiver : Jul. 19, 2011 Date of Test : Jul. 19~23, 2011 Page 5 of 18 FCC ID: ZTNKSR315A Anbotek Compliance Laboratory Limited Report No.201107780F 1.2. Description…

Text truncated - open the document above for the full version.

Page 14 of 18 FCC ID: ZTNKSR315A Anbotek Compliance Laboratory Limited Report No.201107780F 7. PHOTOGRAPH 7.1. Photo of Radiation Emission Test