ZTU-V103IPHDKITCordless IP Phone

Cordless IP Phone User Manual For model: V103IP/V103IPHDKIT Version: V1.0 FUNCTION 1. Support DHCP automatic distribution of IP addresses and other parameters 2. Support PPPOE agreement (ADSL, cable modem access use) 3. The program can be upgraded via HTTP, HTTPS, FTP or TFTP 4. Dynamic voice detection; comfort noise generation; voice buffer technology 5. Hold function 6. Speed dial 7. DND (Do Not Disturb), blacklist, call restriction, hotline function 8. Voicemail 9. Using a standard web browser (such as IE) for setting 10. SSH remote management function 11. Classified management for common user password and remote user password 12. Support * * code function 13. Call Waiting Feature 14. Auto answer 15. Call park 16. Call transfer 17. Tripartite conference 18. 802.1x Authentication 19. LLDP Feature Standard and Protocols ◆ IEEE802.3/802.3u10 Base T/100Base ◆ PPPoE: P oint to point protocol over Ethernet ◆ D H CP Cl i ent and Server: Dynamic Host Configuration Protocol ◆Support G.711a/u, G.729, G.723.1, G.722, iLBC speech encoding algorithm ◆ SIP RFC3261, RFC2543 ◆ TCP/I P: I nternet transmission control protocol ◆ RTP: Real-time Transfer Protocol ◆ RTCP: Real-time Control Protocol ◆ V A D /C N G : can save bandwidth ◆ TFTP: Trivial File Transfer Protocol ◆ Frequency Range: 1921.536-1928.448 MHz Conditions of use: Temperature:-10°C~40°C Humidity:10%~95% HARDWARE OVERVIEW The default WAN port is a DHCP client, the user connects it to the ADSL or WAN port switch, LAN port connects to the computer; you can use the administrator username "admin" and password "admin" to set the login password. Only WAN port supports POE. SOFTWARE OVERVIEW Network Protocol Tone  SIP v2(RFC3261)  IP/TCP/UDP/RTP/RTCP  IP/ICMP/ARP/RARP/SNTP  TFTP Client/DHCP Client/PPPOE Client  Telnet/HTTP Server  DNS Clients  Ring Tone  Ring Back Tone  Dial Tone  Busy Tone Phone Function  Volume Adjustment  Speed dial key Codec  G.711a  G.711u：  G.723.1：  G.729  G.722  iLBC IP Assignment  IP (Static IP)  DHCP  PPPoE Voice Quality Security  VA D： Voice activity detection  AGC： Automatic Gain Control  AEC：Automatic Echo Cancellation  SRTP: Secure Real-time Transport Protocol  HTTP 1.1 basic/digest authentication for Web setup  MD5 for SIP authentication (RFC2069/RFC2617) QoS  QoS field Call Function NAT Traversal  Call Hold  Call Waiting  Call forward  Caller ID  STUN Configuration  Web Browser  Keypad DTMF Firmware Upgrade  IN Band  RFC2833  SIP Info  TFTP  HTTP  FTP  HTTPS You could make a phone call after the phone configuration items are set up. Please check if the cable is properly connected before use. 1. Basic call Making the call by handset：After the handset is placed off-hook, dial and use “#” key as the end dialing symbol. Making the call by speakerphone：After the phone is placed off-hook, dial and use “#” key as the end dialing symbol. 2. Hold Key You can keep and release the call of current line. The only one line is presently in a call, the other line must be placed on hold. 1) Place the call of one line on hold Make sure that the call you want to keep is enabled, then press " Hold" key. 2) Release Hold Make sure that the call is initiated, then press "Hold" key. 3. Volume Control Press “VOL▲” to increase the volume, while press “VOL▼” to decrease the volume. 4. Mute During the call, if you do not want to let them hear your own voice, you can press "Mute" key, so that the other party cannot hear your voice, and you can hear the sound of other end. 5. Memory Key In addition to serving as a storage function, but also can be used as hold, DND, transfer and conference function. See the web call feature function set. 6. Tripartite Conference Function If the phone is Line1 hold, line2 in the call, press the conference key, which can achieve three party conference. During the three party conference, the base unit and handset cannot be switched each other. 7. Transfer The telephone is in conversation with A, A wants to call B, you can press the Transfer key, and then call B, press the T ransfer button again after B hooking off, the transfer function can be achieved. 8. Call Park After the call park feature is enabled, and Hold Key Active and Idle Hold Key related parameters are configured, we can perform the function of park. This function is only applicable to the base unit. 9. Redial After the base unit is stand by or the handset is off-hooked, press Redial key, the last dialed number will be dialed out to achieve the redial function. 10. Register the Handset Place the handset into the cradle of base unit. The “Message” LED on base unit will blink. Initiate the handset registration. The “Message” LED on handset will also begin to blink. At that time, if the base unit and handset have found out each other, the “Message” LED on base unit will stop blinking and the “Message” LED on handset will also stop blinking and emit the prompt sound of successful registration. Note: each base unit can register up to 4 handsets. 11. Toggle between Base Unit and Handset When the base unit is in conversation, press “Line1”/“Line2” key on handset, the call will switch over to the handset. If the handset is in conversation, press “SPEAKER” key, the call will switch over to the base unit. Shortcut Keys 1. * * 47 #, Broadcast the current ip address of the phone. 2. * * 39 #, Broadcast the current software version of the phone. 3. * * 85 #, Broadcast the current phonevlan ID. 4. * * 83 #, Broadcast current tftp server address. 5. * * 72 #, Restart the phone. 6. * * 36 #, Broadcast the current account of the phone. 7. * * 33 * password #, Clear all the current configuration of the phone, and automatically restart. 8. * * 77 * password * config ID #, The phone downloads the configuration file from the tftp server and restarts automatically after the download is successful. 9. * * 87 * password * VLAN ID #, Modify the vlan ID of the phone; modify the vlan id success, the prompt success, and broadcast the mo…

Text truncated - open the document above for the full version.

CETIS,INC. ADD: 4975 N. 30th Street Colorado Springs Colorado, United States 80919 Tel: +1 719 638 8821 Extension 200 Email: [email protected] Attestation Letter Date: 2026-06-01 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, Our product Cordless IP Phone, model: V103IP, FCC ID: ZTU-V103IPHDKIT. For use in America, this product only supports 1921.536-1928.448 MHz, the other functions, bands and modes were disabled to use by manufacture in the software, the end user has no capability to activate it. Sincerely, Signature: Andy York Chief Technology Officer

CFR47§2.911(d)(5)(i)AttestationLetter CETIS,INC. ADD:4975N.30thStreetColoradoSpringsColorado,UnitedStates80919 Tel:+17196388821Extension200 Email:[email protected] AttestationLetter Date:2026-06-01 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsCFR47§2.911(d)(5)(i)Filing FCCID:ZTU-V103IPHDKIT CETIS,INC.certifiesthattheequipmentforwhichauthorizationissoughtisnot“covered” equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903ofthe FCCrules. Sincerely, Signature AndyYork ChiefTechnologyOfficer

CETIS,INC. ADD:4975N.30thStreetColoradoSpringsColorado,UnitedStates80919 Tel:+17196388821Extension200 Email:[email protected] CFR47§2.911(d)(5)(ii)AttestationLetter AttestationLetter Date:2026-06-01 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsCFR47§2.911(d)(5)(ii)Filing FCCID:ZTU-V103IPHDKIT CETIS,INC.certifiesthatasofthedateofthefilingoftheapplication,theapplicantisnot identifiedontheCoveredListasanentityproducing“covered”equipment. Wealsocertifythat,asofthedateofthefilingoftheapplication,theequipmentdoesnotutilize cyber-securityoranti-virussoftwarefromKasperskyLab,Inc,oranyofitssuccessorsand assignees,whichisalsoonthe“coveredlist”. Sincerely, Signature AndyYork ChiefTechnologyOfficer

U.S.AGENTLETTEROFATTESTATION Date:2026-06-01 FEDERALCOMMUNICATIONSCOMMISSION AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsCFR47§2.911(d)(7)Filing FCCID:ZTU-V103IPHDKIT CETIS,INC.certifiesthat,asofthedateofthefilingoftheapplication,CETIS,INC.isour designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID.CETIS,INC. acceptstomaintainanagentfornolessthanoneyearafterthegranteehasterminatedall marketingandimportationortheconclusionofanyCommission-relatedproceeding involvingtheequipment. CETIS,INC.accepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentandApplicantInformation: Name:CETIS,INC. Address:4975N.30thStreetColoradoSpringsColorado,UnitedStates80919 FRN:0021047345 Tel:+17196388821Extension200 Email:[email protected] Signedby(printedname):AndyYork Signature:

CETIS,INC. ADD:4975N.30thStreetColoradoSpringsColorado,UnitedStates80919 Tel:+17196388821Extension200 Email:[email protected] QA-FR-170-B7/29/2014 FCCAuthorization Date:2026-06-01 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Subject:AgentAuthorization Towhomitmayconcern: WeCETIS,INC.,theundersigned,herebyauthorizesBayAreaComplianceLaboratories Corp.(Shenzhen)toactonitsbehalfinallmattersrelatingtoapplicationforEquipment authorization,includingthesigningofalldocumentsrelatingtothesematters.Allacts carriedoutbyBayAreaComplianceLaboratoriesCorp.(Shenzhen)onourbehalfshall havethesameeffectasourownaction. We,theundersigned,herebycertifythatwearenotsubjecttoadenialoffederalbenefits, thatincludesFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988, 21U.S.C.862. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. Sincerely, Signature AndyYork ChiefTechnologyOfficer

CETIS,INC. ADD:4975N.30thStreetColoradoSpringsColorado,UnitedStates80919 Tel:+17196388821Extension200 Email:[email protected] FCCConfidentialAuthorization Date:2026-06-01 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Subject:ConfidentialityRequestregardingapplicationforcertificationof FCCID:ZTU-V103IPHDKIT InaccordancewithSections0.457and0.459oftheCommission’sRules,CETIS,INC. herebyrequestslong-termconfidentialtreatmentofinformationaccompanyingthis applicationasoutlinedbelow: BlockDiagram Schematics OperationDescription Partlist Theabovematerialscontainproprietaryandconfidentialinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsprovidesunjustified benefitstoitscompetitorsinthemarket. Sincerely, Signature AndyYork ChiefTechnologyOfficer

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601S52077E-RF-EXP-PP Page 1 of 3 EUT EXTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601S52077E-RF-EXP-PP Page 2 of 3 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601S52077E-RF-EXP-PP Page 3 of 3

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2601S52077E-RF-PP FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601S52077E-RF-INP-PP Page 1 of 6 EUT INTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601S52077E-RF-INP-PP Page 2 of 6 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601S52077E-RF-INP-PP Page 3 of 6 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601S52077E-RF-INP-PP Page 4 of 6 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601S52077E-RF-INP-PP Page 5 of 6 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601S52077E-RF-INP-PP Page 6 of 6 DECT ANT

Bay Area Compliance Laboratories Corp.(Shenzhen) Report No.: 2601S52077E-SA TR-EM-SA005 Page 1 of 4 Version 3.0 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Phantom: SAM-Twin V8.0 P1aP2a; Type: QD 000 P41 AA ; Serial: 1962 Bay Area Compliance Laboratories Corp.(Shenzhen) Report No.: 2601S52077E-SA TR-EM-SA005 Page 2 of 4 Version 3.0 Head Left Cheek Setup Photo (0 mm) Head Left Tilt Setup Photo (0 mm) Bay Area Compliance Laboratories Corp.(Shenzhen) Report No.: 2601S52077E-SA TR-EM-SA005 Page 3 of 4 Version 3.0 Head Right Cheek Setup Photo (0 mm) Head Right Tilt Setup Photo (0 mm) Bay Area Compliance Laboratories Corp.(Shenzhen) Report No.: 2601S52077E-SA TR-EM-SA005 Page 4 of 4 Version 3.0 Body Front Setup Photo (0 mm) Body Back Setup Photo (0 mm)

Note: The information marked # is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP or any agency of the U.S. Government. This report may contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “▼”. Bay Area Compliance Laboratories Corp. (Shenzhen) 5F(B-West) , 6F, 7F, the 3rd Phase of Wan Li Industrial Building D, Shihua Rd, FuTian Free Trade Zone, Shenzhen, China Tel: +86-755-33320018Fax: +86-755-33320008www.baclcorp.com.cn TR-EM-SA005 Page 1 of 65 Version 3.0 TEST REPORT Applicant Name: CETIS,INC. Address: 4975 N. 30th Street Colorado Springs Colorado, United States 80919 Report Number: 2601S52077E-SA FCC ID: ZTU-V103IPHDKIT Test Standard (s) FCC 47 CFR part 2.1093 Sample Description Product Name: Cordless IP Phone Model No.: V103IP Multiple Model(s) No.: N/A Trade Mark: Cetis Serial Number: 3JP7-1 Date Received: 2026/04/13 Date of Test: 2026/05/16 Issue Date: 2026/05/18 Test Result: Pass ▲ ▲In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Danil Qiu Jimmy Xiao SAR Engineer EMC Manager Bay Area Compliance Laboratories Corp.(Shenzhen) Report No.: 2601S52077E-SA TR-EM-SA005 Page 2 of 65 Version 3.0 Attestation of Test Results MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) DECT 1g Head SAR 0.01 1.6 1g Body SAR 0.02 Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques RF Exposure Procedures: TCB Workshop April 2019 KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 648474 D04 Handset SAR v01r03 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp.(Shenzhen) Report No.: 2601S52077E-SA TR-EM-SA005 Page 3 of 65 Version 3.0 TABLE OF CONTENTS DOCUMENT REVISION HISTORY .......................................................................................................................... 4 EUT DESCRIPTION ..................................................................................................................................................... 5 TECHNICAL SPECIFICATION .......................................................................................................................................... 5 REFERENCE, STANDARDS, AND GUILDELINES ................................................................................................ 6 SAR LIMITS .................................................................................................................................................................. 6 FACILITIES ................................................................................................................................................................... 7 DESCRIPTION OF TEST SYSTEM ........................................................................................................................... 8 EQUIPMENT LIST AND CALIBRATION .............................................................................................................. 15 EQUIPMENT’S LIST & CALIBRATION INFORMATION ................................................................................................... 15 SAR MEASUREMENT SYSTEM VERIFICATION ............................................................................................... 16 LIQUID VERIFICATION ................................................................................................................................................ 16 SYSTEM ACCURACY VERIFICATION ............................................................................................................................ 17 SAR SYSTEM VALIDATION DATA ...................................................................................................................... 18 EUT TEST STRATEGY AND METHODOLOGY .................................................................................................. 19 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR ........................................................................ 19 CHEEK/TOUCH POSITION ............................................................................................................................................ 20 EAR/TILT POSITION .................................................................................................................................................... 20 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS ............................................................................... 21 TEST DISTANCE FOR SAR EVALUATION ..................................................................................................................... 21 SAR EVALUATION…

Text truncated - open the document above for the full version.

AntennaSpecification 1.AntennaManufacturerInformation ManufacturerName JiangsuShenyingInformationTechnologyCo.,Ltd. ManufacturerAddress DingshuTown,SouthofTangshuRoad,EastofShenyingRoad, YixingCity ModelANT-V103Series ProductType 1.8G/1.9GDual-bandOmni-directionalAntenna 2.KeyElectricalSpecifications OperatingFrequencyRange1780MHz~1930MHz AntennaGain0.5dBi InputImpedance50Ω RadiationPattern Omni-directionalRadiation 3.Mechanical&PhysicalParameters AntennaMaterial Copper OverallDimensionSeeattacheddrawing BSAnt0 BSAnt1 HSAnt0 4.AntennaGain2D/3DRadiationPattern 4.1GeneralDescription Thisisanomni-directionalantennawithuniform360 ° horizontalcoverageand optimizedverticaldowntiltcoveragewithoutobviousblindzone,applicableforindoor &outdoorfull-rangewirelesssignalcoverage. 4.22DRadiationPattern 1、[email protected]/1.9GHz HorizontalPlane(XYPlane):360 ° uniformomniradiationwithgainfluctuation ≤ 0.5dBiforexcellentevencoverage; VerticalPlane(XZPlane):Moderateelevationcoverage,optimizedforhorizontal communicationwithgentlesignalattenuationathigh/lowpitchangles. BSANT0 BSANT1 HSANT0 4.33DRadiationPattern Theantennafeaturesstandardsphericalomni-directional3Dradiationpattern.Zero deadangleonhorizontalplane,verticalradiationrangematchescommonwireless communicationpitchrequirement.Highradiationefficiencyandbalancedsignal coveragetosatisfyresidential,commercialandindustrialwirelesscommunication applications. BSANT0 BSANT1 HSANT0

Note: The information marked # is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP or any agency of the U.S. Government. This report may contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “▼”. Bay Area Compliance Laboratories Corp. (Shenzhen) 5F(B-West) , 6F, 7F, the 3rd Phase of Wan Li Industrial Building D, Shihua Rd, FuTian Free Trade Zone, Shenzhen, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn TR-EM-RF021 Page 1 of 71 Version 3.0 TEST REPORT Applicant Name:CETIS,INC. Address:4975 N. 30th Street Colorado Springs Colorado, United States 80919 Report Number:2601S52077E-RF-00B FCC ID:ZTU-V103IPHDKIT Test Standard (s) FCC PART 15D Sample Description Product Type:Cordless IP Phone Model No.:V103IP Multiple Model(s) No.:N/A Trade Mark:Cetis Date Received:2026/04/15 Issue Date:2026/07/03 Test Result:Pass ▲ ▲ In the configuration tested, the EUT complied with the standards above. Prepared and Checked By:Approved By: Bruce LinNancy Wang RF EngineerRF Supervisor Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601S52077E-RF-00B TR-EM-RF021 Page 2 of 71 Version 3.0 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ..........................................................................................................................4 GENERAL INFORMATION ........................................................................................................................................5 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)......................................................................................5 OBJECTIVE ....................................................................................................................................................................5 MEASUREMENT UNCERTAINTY .....................................................................................................................................6 TEST FACILITY ..............................................................................................................................................................6 SYSTEM TEST CONFIGURATION ...........................................................................................................................7 DESCRIPTION OF TEST CONFIGURATION .......................................................................................................................7 EQUIPMENT MODIFICATIONS ........................................................................................................................................7 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS .........................................................................................................7 EXTERNAL I/O CABLE...................................................................................................................................................7 BLOCK DIAGRAM OF TEST SETUP .................................................................................................................................7 SUMMARY OF TEST RESULTS ................................................................................................................................9 TEST EQUIPMENT LIST ..........................................................................................................................................10 FCC §1.1307 & §2.1093 - RF EXPOSURE.................................................................................................................12 § 15.317, § 15.203 ANTENNA REQUIREMENT ......................................................................................................13 APPLICABLE STANDARD .............................................................................................................................................13 ANTENNA CONNECTOR CONSTRUCTION .....................................................................................................................13 FCC§15.315 & §15.207 - AC LINE CONDUCTED EMISSIONS ...........................................................................14 APPLICABLE STANDARD .............................................................................................................................................14 EUT SETUP .................................................................................................................................................................14 EMI TEST RECEIVER SETUP ........................................................................................................................................14 TEST PROCEDURE........................................................................................................................................................15 FACTOR & OVER LIMIT CALCULATION.......................................................................................................................15 TEST DATA..................................................................................................................................................................15 FCC §15.205, §15.209 & §15.319 (G) - RADIATED EMISSIONS ..........................................................................18 APPLICABLE STANDARD ..............................................................................................…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601S52077E-RF-TSPB Page 1 of 3 TEST SETUP PHOTOGRAPHS Conducted Emissions - Front View Conducted Emissions - Side View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601S52077E-RF-TSPB Page 2 of 3 Radiated Emissions View (Below 30MHz) Radiated Emissions View (Below 1 GHz) Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601S52077E-RF-TSPB Page 3 of 3 Radiated Emissions View (1-18 GHz) Radiated Emissions View (18-20 GHz)