ZXNLEETACEE48PBELT DRIVE TURNTABLE WITH BLUETOOTH

Certification Coordinator

Guangdong Leetac Electronics Technology Co., Ltd. No.15 Danli Road, South District, Zhongshan City, Guangdong province, China Sep. 09, 2024 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: ZXNLEETACEE48P Models: E-E48P, E-E48x, E-E48xy, tx-90, TX-90, TX-90a, TX-90b, TX-90B, TX-90c, TX-90S, TX-90SP, TX-91, TX-100, TX-90x, SEM5008, SEM5008a, SEM5008b, SEM5008c, SEM5008x, APX-800BT, APX-800, APX-590, BPTT3901 ( “x”, “y” can be replaced by digit 0-9, letter A-Z or blank) To Whom It May Concern: We, The Guangdong Leetac Electronics Technology Co., Ltd. hereby declare that the Series Model and Test Model only different in model name, brand name, trade name and exterior color for trading purpose. Sincerely, Guangdong Leetac Electronics Technology Co., Ltd. Signature:

Letter of Authorization Company: Guangdong Leetac Electronics Technology Co., Ltd. Address: No.15 Danli Road, South District, Zhongshan City, Guangdong province, China Product Name: BELT DRIVE TURNTABLE WITH BLUETOOTH Model Number(s): E-E48P, E-E48x, E-E48xy, tx-90, TX-90, TX-90a, TX-90b, TX-90B, TX-90c, TX-90S, TX-90SP, TX-91, TX-100, TX-90x, SEM5008, SEM5008a, SEM5008b, SEM5008c, SEM5008x, APX-800BT, APX-800, APX-590, BPTT3901 ( “x”, “y” can be replaced by digit 0-9, letter A-Z or blank) Product Description: BELT DRIVE TURNTABLE WITH BLUETOOTH We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Sep. 09, 2024 Name: Stephanie Zhang Title: Certification Coordinator Company: Guangdong Leetac Electronics Technology Co., Ltd.

Page 1 of 9 RF Exposure Report Report No.: AGC08094240702FH01 FCC ID : ZXNLEETACEE48P APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : BELT DRIVE TURNTABLE WITH BLUETOOTH BRAND NAME : Leetac, Miffy, Peanuts, SEM, SDigital, Tyler, Aiwa, Blaupunkt MODEL NAME : E-E48P, E-E48x, E-E48xy, tx-90, TX-90, TX-90a, TX-90b, TX-90B, TX-90c, TX-90S, TX-90SP, TX-91, TX-100, TX-90x, SEM5008, SEM5008a, SEM5008b, SEM5008c, SEM5008x, APX-800BT, APX-800, APX-590, BPTT3901 ( “x”, “y” can be r eplaced by digit 0-9, letter A-Z or blank) APPLICANT : Guangdong Leetac Electronics Technology Co., Ltd. DATE OF ISSUE : Aug. 05, 2024 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC08094240702FH01 Page 2 of 9 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Aug. 05, 2024 Valid Initial Release Report No.: AGC08094240702FH01 Page 3 of 9 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Mobile Device Evaluation Method and Limit ................................................................................................ 8 5. Measurement Results ..................................................................................................................................... 9 8. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC08094240702FH01 Page 4 of 9 1. General Information Applicant Guangdong Leetac Electronics Technology Co., Ltd. Address No.15 Danli Road, South District, Zhongshan City, Guangdong province, China Manufacturer Guangdong Leetac Electronics Technology Co., Ltd. Address No.15 Danli Road, South District, Zhongshan City, Guangdong province, China Factory Guangdong Leetac Electronics Technology Co., Ltd. Address No.15 Danli Road, South District, Zhongshan City, Guangdong province, China Product Designation BELT DRIVE TURNTABLE WITH BLUETOOTH Brand Name Leetac, Miffy, Peanuts, SEM, SDigital, Tyler, Aiwa, Blaupunkt Test Model E-E48P Series Model(s) E-E48x, E-E48xy, tx-90, TX-90, TX-90a, TX-90b, TX-90B, TX-90c, TX-90S, TX-90SP, TX-91, TX-100, TX-90x, SEM5008, SEM5008a, SEM5008b, SEM5008c, SEM5008x, APX-800BT, APX-800, APX-590, BPTT3901 ( “x”, “y” can be replaced by digit 0-9, letter A-Z or blank) Difference Description Only different in model name, brand name, trade name and exterior color for trading purpose. Date of receipt of test item Jul. 29, 2024 Date of Test Jul. 29, 2024~Aug. 05, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Jack Gui (Project Engineer) Aug. 05, 2024 Reviewed By Calvin Liu (Reviewer) Aug. 05, 2024 Approved By Max Zhang (Authorized Officer) Aug. 05, 2024 Report No.: AGC08094240702FH01 Page 5 of 9 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version V1.0 Software Version V1.0 Modulation Type BR GFSK, EDR π /4-DQPSK, 8DPSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain 0.26dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC08094240702FH01 Page 6 of 9 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files wi…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 12 Report Version B Test Report No.: AN2210WDG0152 ANTENNA TEST REPORT Applicant Guangdong Leetac Electronics Technology Co .,Ltd. Address No.15 Danli Road, South District, Zhongshan, Guangdong, China. Manufacturer or Supplier Guangdong Leetac Electronics Technology Co .,Ltd. Address No.15 Danli Road, South District, Zhongshan, Guangdong, China. Product Antenna Brand Name N/A Model ANT02 Max. Peak Gain 0.26 dBi Date of tests Dec. 13, 2022 Tested by Andy Zhu Supervisor / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Dec. 19, 2022 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 12 Report Version B Test Report No.: AN2210WDG0152 TABLE OF CONTENTS 1. MEASUREMENTS SETUP ..................................................................................................................3 2. SIZE OF THE ANTENNA .....................................................................................................................3 3. TEST INSTRUMENTS .........................................................................................................................4 4. TEST RESULTS ...................................................................................................................................5 5. PHOTOGRAPHS OF THE TEST CONFIGURATION....................................................................... 12 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 12 Report Version B Test Report No.: AN2210WDG0152 1. MEASUREMENTS SETUP 2. SIZE OF THE ANTENNA Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 12 Report Version B Test Report No.: AN2210WDG0152 3. TEST INSTRUMENTS Equipment Manufacturer Model No. Serial No. Next Cal. Signal Generator Agilent N5183A MY50140980 Jul. 20, 23 Spectrum Analyzer Rohde&Schwarz FSV40 101003 Jan. 16, 23 Broad-Band Horn Antenna SCHWARZBECK BBHA 9120 D 9120D-1247 Apr. 23, 23 Broad-Band Horn Antenna SCHWARZBECK BBHA 9120 B 00740 Jul. 20, 23 Turn Table MF MF-7802 MF780208191 N/A Controller MF MF-7802 MF780208243 N/A Test Software BV ADT BV ADT Antenna Pattern V6.2 N/A NOTE: 1. The test was performed in Fully Anechoic Room. 2. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to CEPREI/CHINA, GRGT/CHINA and NIM/CHINA. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 5 of 12 Report Version B Test Report No.: AN2210WDG0152 4. TEST RESULTS ANTENNA FREQUENCY (MHz) ANTENNA POLARITY MAX. PEAK GAIN (dBi) PCB 2402 Horizontal -0.86 Vertical -1.13 2440 Horizontal 0.10 Vertical -0.47 2480 Horizontal 0.26 Vertical -0.30 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 6 of 12 Report Version B Test Report No.: AN2210WDG0152 Frequency: 2402 MHz (Horizontal) Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 7 of 12 Report Version B Test …

Text truncated - open the document above for the full version.

Report No.: AGC08094240702FR01 Page 70 of 76 12. Frequency Separation Measurement 12.1 Provisions Applicable When the power is less than 0.125W: The minimum permissible channel separation for this system is 2/3 the value of the 20dB BW. When the power is less than 1W: The minimum permissible channel separation for this system is 20dB BW. 12.2 Measurement Procedure The EUT shall have its hopping function enabled. Use the following spectrum analyzer settings: 1. Span: Wide enough to capture the peaks of two adjacent channels. 2. RBW: Start with the RBW set to approximately 30% of the channel spacing; adjust as necessary to best identify the center of each individual channel. 3. Video (or average) bandwidth (VBW) ≥ RBW. 4. Sweep: Auto. 5. Detector function: Peak. 6. Trace: Max hold. g) Allow the trace to stabilize. 7. Use the marker-delta function to determine the separation between the peaks of the adjacent channels. 12.3 Measurement Setup (Block Diagram of Configuration) 12.4 Measurement Result Test Data of Frequency Separation Test Mode Channel Separation (MHz) Limits (MHz) Pass or Fail 8DPSK Hopping 0.989 ≥0.87 Pass Report No.: AGC08094240702FR01 Page 71 of 76 Test Graphs of Number of Hopping Frequency Test_Graph_EDR_HOP_ANT1_NA_3Mbps_Hopping Separation Note: All mode rates are tested and evaluated, 8DPSK modulated 3DH5 mode is the worst case and documented in the report. Report No.: AGC08094240702FR01 Page 72 of 76 13. AC Power Line Conducted Emission Test 13.1 Measurement Limit Frequency Maximum RF Line Voltage Q.P. (dBμV) Average (dBμV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 13.2 Measurement Setup (Block Diagram of Configuration) Report No.: AGC08094240702FR01 Page 73 of 76 13.3 Preliminary Procedure of Line Conducted Emission Test 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.10. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4. All support equipment received AC120V/60Hz power from a LISN, if any. 5. The EUT received DC 5V power from adapter which received AC120V/60Hz power from a LISN. 6. The test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 kHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation. 9. The test mode(s) were scanned during the preliminary test. Then, the EUT configuration and cable configuration of the above highest emission level were recorded for reference of final testing. 13.4 Final Procedure of Line Conducted Emission Test 1. EUT and support equipment was set up on the test bench as per step 2 of the preliminary test. 2. A scan was taken on both power lines, Line 1 and Line 2, recording at least the six highest emissions. Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. If EUT emission level was less – 2dB to the A.V. limit in Peak mode, then the emission signal was re-checked using Q.P and Average detector. 3. The test data of the worst case condition(s) was reported on the Summary Data page. 13.5 Measurement Results Report No.: AGC08094240702FR01 Page 74 of 76 AC Power Line Conducted Emission Test Test Mode Mode 1 LISN Line Hot Side Report No.: AGC08094240702FR01 Page 75 of 76 AC Power Line Conducted Emission Test Test Mode Mode 1 LISN Line Neutral Side Report No.: AGC08094240702FR01 Page 76 of 76 Appendix I: Photographs of Test Setup Refer to the Report No.: AGC08094240702AP01 Appendix II: Photographs of Test EUT Refer to the Report No.: AGC08094240702AP02 -----End of Report----- Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court ord…

Text truncated - open the document above for the full version.

Page 1 of 76 FCC Test Report Report No.: AGC08094240702FR01 FCC ID : ZXNLEETACEE48P APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : BELT DRIVE TURNTABLE WITH BLUETOOTH BRAND NAME : Leetac, Miffy, Peanuts, SEM, SDigital, Tyler, Aiwa, Blaupunkt MODEL NAME : E-E48P, E-E48x, E-E48xy, tx-90, TX-90, TX-90a, TX-90b, TX-90B, TX-90c, TX-90S, TX-90SP, TX-91, TX-100, TX-90x, SEM5008, SEM5008a, SEM5008b, SEM5008c, SEM5008x, APX-800BT, APX-800, APX-590, BPTT3901 ( “x”, “y” can be r eplaced by digit 0-9, letter A-Z or blank) APPLICANT : Guangdong Leetac Electronics Technology Co., Ltd. DATE OF ISSUE : Aug. 05, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC08094240702FR01 Page 2 of 76 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Aug. 05, 2024 Valid Initial Release Report No.: AGC08094240702FR01 Page 3 of 76 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies and Behaviour. ............................................................................. 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4.System Test Configuration ............................................................................................................................ 14 4.1 EUT Configuration ................................................................................................................................... 14 4.2 EUT Exercise ........................................................................................................................................... 14 4.3 Configuration of Tested System .............................................................................................................. 14 4.4 Equipment Used in Tested System ......................................................................................................... 14 4.5 Summary of Test Results ........................................................................................................................ 15 5. Description of Test Modes ........................................................................................................................... 16 6. RF Output Power Measurement .................................................................................................................. 17 6.1 Provisions Applicable .............................................................................................................................. 17 6.2 Measurement Procedure ......................................................................................................................... 17 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 17 6.4 Measurement Result ............................................................................................................................... 18 7. 20dB Bandwidth and 99% Occupied Bandwidth Measurement ............................................................... 24 7.1 Provisions Applicable .............................................................................................................................. 24 7.2 Measurement Procedure ......................................................................................................................... 24 7.3 Measurement Se…

Text truncated - open the document above for the full version.