ZZUWFD42C1A3D LCD Display

WFD42C1A User Manual A. System requirements Hardware requirements： CPU：Intel Pentium 2.0G or above GPU: Nvidia GT-8400 /512M or above Memory: 2G HDD：320G Interface: DVI or HDMI output Software requirement： System： Windows XP sp3 or Windows 7 B. Quick Guide 1. Connect the display and PC by the DVI cord. 2. Plug the power cord . 3. Turn on the display by putting the switch on “1” . 4. The indicator LED is on, and now can input the signal. 5. By pushing the power button on remote control, the display can be switched between on and off. C. Technical Parameters Model WFD42C1A Power Supply rating：AC100-240V 50/60HZ Power rating 200W Standby <=1W Dimension 1200*610*135mm(W*H*T，base excluded） 1200*650*235mm(W*H*T, base included） Weight 30.5KG（base excluded），32.5KG（base included） Input DVI DVI output 480i@60HZ, 480P@60HZ 576i@50HZ, 576P@50HZ 720P@60HZ, 1080i@50HZ, 1080i@60HZ 1080P@50HZ, 1080P@60HZ 640*480@60HZ, 800*600@60HZ 1024*768@60HZ, 1280*1024@60HZ Accessory Remote control*1，User manual*1，Power cord*1，DVI cord*1 D. Trouble shooting Phenomena methods No power and the indicator LED is not on Plug the power cord The remote control is not worked The cell is drained, change the cell. Black Screen Maybe the DVI is not connected, re-connect the DVI cord and reboot the computer. E. FCC warning statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 Zhejiang Wowfly Industrial Co., Ltd 2011/9/9 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Zhejiang Wowfly Industrial Co., Ltd ， hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): (Product description: 3D LCD Display model name:WFD42C1A FCC ID: ZZUWFD42C1A We affirm that between SIEMIC and Zhejiang Wowfly Industrial Co., Ltd , any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature： Client’s name / title：CEO Contact information / address：No.99,4 Jianshe Road, Xiaoshan Economic Development Zone, Hangzhou, Zhejiang, China

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (current) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 1.0 2.0 August – 11 - 2008 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 2.0 Zhejiang Wowfly Industrial Co., Ltd (Current Date) 2011/9/9 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID:ZZUWFD42C1A We hereby request confidential treatment of information accompanying this application as outlined below: - BlockDiagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature: Client’s name / title:张强/ CEO Contact information / address: No.99,4 Jianshe Road, Xiaoshan Economic Development Zone, Hangzhou, Zhejiang, China

FCC ID:ZZUWFD42C1A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.This device may not cause harmful interference,and 2.This device must accept any interference received, including interference that may cause undesired operation.

Intternal Phootos

Zhejiang Wowfly Industrial Co., Ltd. 3D LCD Display Model: WFD42C1A September 19, 2011 Report No.: 11050082 (This report supersedes NONE) Modifications made to the product : None This Test Report is Issued Under the Authority of: Deon Dai Test Engineer Spring Zhou Technical Manager This test report may be reproduced in full only. Test result presented in this test report is applicable to the representative sample only. Title: EMC Test Report for 3D LCD Display FCC ID: ZZUWFD42C1A Model: WFD42C1A To: FCC Part 15 Subpart B Class B: Oct. 2010, ANSI C63.4: 2009 Serial#: 11050082 Issue Date: 19 September 2011 Page: 2 of 37 www.siemic.com CERTIFICATE OF TEST Date of Issue: September 19, 2011 Company Name: Zhejiang Wowfly Industrial Co., Ltd. Product Name/Model: 3D LCD Display / WFD42C1A Stipulated Standard: FCC 15B 2010 (Class B) Equipment complied with the specification [ X ] Equipment did not comply with the specification [ ] The submission documentation to a National Regulatory Body for type approval purposes shall consist of two parts; Part one: Application Form; Part two: Test Report; Modifications made to the product : None This Test Report is Issued Under the Authority of: Deon Dai Compliance Engineer Spring Zhou Technical Director Title: EMC Test Report for 3D LCD Display FCC ID: ZZUWFD42C1A Model: WFD42C1A To: FCC Part 15 Subpart B Class B: Oct. 2010, ANSI C63.4: 2009 Serial#: 11050082 Issue Date: 19 September 2011 Page: 3 of 37 www.siemic.com Laboratory Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management through out a project. Our extensive experience with China, Asia Pacific, North America, European, and international compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets. Accreditations for Conformity Assessment Country/RegionAccreditation Body Scope USA FCC, A2LA EMC , RF/Wireless , Telecom Canada IC, A2LA, NIST EMC, RF/Wireless , Telecom Taiwan BSMI , NCC , NIST EMC, RF, Telecom , Safety Hong Kong OFTA , NIST RF/Wireless ,Telecom Australia NATA, NIST EMC, RF, Telecom , Safety Korea KCC/RRA, NIST EMI, EMS, RF , Telecom, Safety Japan VCCI, JATE, TELEC, RFT EMI, RF/Wireless, Telecom Mexico NOM, COFETEL, Caniety Safety, EMC , RF/Wireless, Telecom Europe A2LA, NIST EMC, RF, Telecom , Safety Accreditations for Product Certifications Country Accreditation Body Scope USA FCC TCB, NIST EMC , RF , Telecom Canada IC FCB , NIST EMC , RF , Telecom Singapore iDA, NIST EMC , RF , Telecom EU NB EMC & R&TTE Directive Title: EMC Test Report for 3D LCD Display FCC ID: ZZUWFD42C1A Model: WFD42C1A To: FCC Part 15 Subpart B Class B: Oct. 2010, ANSI C63.4: 2009 Serial#: 11050082 Issue Date: 19 September 2011 Page: 4 of 37 www.siemic.com This page has been left blank intentionally. Title: EMC Test Report for 3D LCD Display FCC ID: ZZUWFD42C1A Model: WFD42C1A To: FCC Part 15 Subpart B Class B: Oct. 2010, ANSI C63.4: 2009 Serial#: 11050082 Issue Date: 19 September 2011 Page: 5 of 37 www.siemic.com CONTENTS 1 EXECUTIVE SUMMARY & EUT INFORMATION.............................................................................................................6 2 TECHNICAL DETAILS..................................................................................................................................................7 3 MODIFICATION............................................................................................................................................................8 4 TEST SUMMARY..........................................................................................................................................................9 5 MEASUREMENTS, EXAMINATION AND DERIVED RESULTS......................................................................................10 ANNEX A. TEST INSTRUMENTATION & METHOD..............................................................................................................18 ANNEX B. EUT AND TEST SETUP PHOTOGRAPHS...........................................................................................................23 ANNEX C. TEST SETUP AND SUPPORTING EQUIPMENT...................................................................................................31 ANNEX D. USER MANUAL / BLOCK DIAGRAM / SCHEMATICS / PART LIST.......................................................................35 ANNEX E. SIEMIC ACCREDITATION CERTIFICATES..........................................................................................................36 Title: EMC Test Report for 3D LCD Display FCC ID: ZZUWFD42C1A Model: WFD42C1A To: FCC Part 15 Subpart B Class B: Oct. 2010, ANSI C63.4: 2009 Serial#: 11050082 Issue Date: 19 September 2011 Page: 6 of 37 www.siemic.com 1 Executive Summary & EUT Information The purpose of this test program was to demonstrate compliance of the Zhejiang Wowfly Industrial Co., Ltd. 3D LCD Display , against the current Stipulated Standards. The 3D LCD Display has demonstrated compliance with the FCC Part 15 Subpart B Class B: 2010. EUT Information EUT Description 3D LCD Display Model No WFD42C1A Serial No N/A Input Power 110V AC-230V AC;2.0A/1.0A;60Hz /50Hz; 200W Classification Per Stipulated Test Standard FCC Part 15 Subpart B Class B: Oct. 2010, ANSI C63.4: 2009 Title: EMC Test Report for 3D LCD Display FCC ID: ZZUWFD42C1A Model: WFD42C1A To: FCC Part 15 Subpart B Class B: Oct. 2010, ANSI C63.4: 2009 Serial#: 11050082 Issue Date: 19 September 2011 Page: 7 of 37 www.siemic.com 2 TECHNICAL DETAILS Purpose Compliance testing of 3D LCD Display with stipulated standards Applicant / Client Zhejiang Wowfly Industrial Co., Ltd. No.99,4 Jiansh…

Text truncated - open the document above for the full version.

Co Radiated onducted E Emission Emission (30MHz - – Front Vi 1GHz) – F iew Front View w Radiated Emissionn (30MHz – – 1GHz) - RRear Vieww