2A22E-WWYLT262AX1500 Wi-Fi 6 Router

User Guide AX1500 Wi-Fi 6 Router T262-T21D •Specifications: WiFi Standard: IEEE802.11b/g/n IEEE802.11a/n/ac/ax Interface: 1 WAN 3 LAN •Environment: Rated Power Input: 12VDC, 1A Operating Temperature: 0-40°C Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Safety Instruction 1.WARNING: To reduce the risk of fire or electric shock, do not expose this device to rain or moisture. The device shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. 2.WARNING: the power plug/direct plug-in adpater is used as disconnect device, the disconnect device shall remain readily operable. 3. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer or service operator where the product was purchased. They can take this product for environmental safe recycling. 4.Warning: to reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. 5.The power adapter is used as the power interrupting d evice. Please pay attention to safety plug and pull and convenient operation. 6.Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. 7.Use only the AC adapter which is included in the product package. Any other adapter may cause damage to the device. Such damage is not covered under warranty. 8.Please use and store the router and its accessories within the temperature range of 0°C~40°C. When the temperature is too high or too low, it may cause equipment failure. 9.WARNING: The direct plug-in adapter is used as disconnect device, the disconnect device shall remain readily operable. FCC Warning Statement FCC Radiation Exposure Statement: The antennas used for this transmitter must be installed to provide aseparation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1 ) this device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation 1.1 The first step to start configuring your router is to plug it in and then connect a network cable （RJ45） to your WAN port, the other side of network cable (RJ45) must also be connected to your home Modem (xDSL/PON). 1.2 After plugging in the router and connecting it to the Modem, proceed to the next topic, which is the configuration step by step. 1.3 If your internet connection is through an Ethernet cable from the wall instead of through a home Modem (xDSL/PON) , connect the Ethernet cable directly to the router’s Internet port. 1. Connect the Router 6 Switch on the router. And waiting for the LED turns into green. 4 Connect the power adapter cable to the router’s DC-IN and turn it on. 5 Plug the router and modem’s power adapter. 3 Connect the router's WAN port with the Ethernet cable 2 Connect the modem’s LAN port with the Ethernet cable 1 Power off or unplug your modem 2. Indicator LED Status Description Off The router is power off Red On The router is power on but Internet is not working Green On The router is already connected to the internet Green Flashing WPS or Mesh pairing 3. Connect Device to the Router 3.1 Wireless Activate the Wi-Fi on your smartphone or notebook, connect to the router's 2.4GHz or 5GHz network with the SSID provided at the bottom of the router and enter the IP address 192.168.10.1 in any browser; • Find the SSID and SSID password printed on the label at the bottom of the router. • Click the network icon of your computer or go to WiFi settings of your smart device, and then select the SSID and input password to join the network. 3.2 Wired Connect a network cable(RJ45) to the LAN port of the router and the other side of network cable(RJ45) connect to a notebook or desktop and enter the IP address 192.168.10.1 in the browser. Remember to turn off the device's Wi-Fi before performing this step. 4. Configure your router via Web Open the mobile phone or computer browser, visit the 192.168.10.1 website, enter the default Username and Password on the label at the bottom of the router, then you can enter the router management page. When …

Text truncated - open the document above for the full version.

Micronet Union Technology(Chengdu) Co., Ltd. Subject: Declaration letter We: Company Name: Micronet Union Technology(Chengdu) Co., Ltd Address: Room 502, Building 5, N.O. 528, Yuefei Road, Shibantan Street, Xindu District, Chengdu, Sichuan, China Product Name: AX1500 Wi-Fi 6 Router; FCC ID: 2A22E-WWYLT262; Model Number: T262-T21D, T262-T21X, T262-BXX, T262-PQX, (the last X=A-Z or a-z, which indicates for different appearance, dimension and color.) They have the same circuit and the only difference is antenna and appearance, All models share five appearance; EUT1, EUT4 and EUT5 have the identical antenna, EUT2 and EUT3 have the identical antenna. EUT1 EUT4 EUT5 EUT2 EUT3 Applicant: Micronet Union Technology(Chengdu) Co., Ltd Sincerely, Signature: Name: Snow Zhong Title: Senior Manager file: declaration letter-template Page 1 of 1

C5266091_X24_Ed.1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Micronet Union Technology(Chengdu) Co., Ltd Grantee code: 2A22E FCC ID: 2A22E-WWYLT262 Contact Name: Snow Zhong Address: Room 502, Building 5, N.O. 528, Yuefei Road, Shibantan Street, Xindu District, Chengdu, Sichuan, China Telephone No: +0086-018262619637 Fax No: 028-81265178 Email: [email protected] i. Micronet Union Technology(Chengdu) Co., Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. Micronet Union Technology(Chengdu) Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Date: 2023/02/09 Applicant’s Name: Snow Zhong Title: Senior Manager Signature ： 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

C5266091_X23_Ed.1 1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent: Company Name: QPS America, Inc. FRN: 0033412354 Contact Name: John Gulino Address: 5005 Rockside Road, Suite 600, Independence, Ohio 44131-6827 Telephone No: 216-377-3191 Email: [email protected] This letter is to confirm that the US Agent for Service of Process accepts responsibility to act as a local representative on behalf of(Micronet Union Technology (Chengdu) Co., Ltd). The US Agent for Server of Process is aware of and agrees to comply with the requirements - Applicant: Company name: Micronet Union Technology (Chengdu) Co., Ltd Product Description: AX1500 Wi-Fi 6 Router Grantee code: 2A22E FCC ID: 2A22E-WWYLT262 Contact Name: Snow Zhong Address: Room 502, Building 5, N.O. 528, Yuefei Road, Shibantan Street, Xindu District, Chengdu, Sichuan, China Telephone No: +0086-018262619637 Fax No: 028-81265178 Email: [email protected] The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. This Agreement is valid until (Product lifetime) Date: 2023/02/20 Applicant’s Name: Snow Zhong US Agent’s Name: John Gulino Title: Senior Manager Title: President Signature： Signature outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911.

C5266091_X8_Ed.1 Micronet Union Technology(Chengdu) Co., Ltd Room 502, Building 5, N.O. 528, Yuefei Road, Shibantan Street, Xindu District, Chengdu, Sichuan, China ____________________________________________________________________________ Company: Micronet Union Technology(Chengdu) Co., Ltd Address: Room 502, Building 5, N.O. 528, Yuefei Road, Shibantan Street, Xindu District, Chengdu, Sichuan, China Product Name: AX1500 Wi-Fi 6 Router Model Number: T262-T21D, T262-T21X, T262-BXX, T262-PQX, (the last X=A-Z or a-z, which indicates for different appearance, dimension and color.) FCC Identifier: 2A22E-WWYLT262 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Snow Zhong Date: January 31, 2023 Title: Senior Manager Signature of applicant: 1/1

C5266091_X10_Ed.2 Micronet Union Technology(Chengdu) Co., Ltd Room 502, Building 5, N.O. 528, Yuefei Road, Shibantan Street, Xindu District, Chengdu, Sichuan, China Snow Zhong Phone: +0086-018262619637 Email: [email protected] Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: January 31, 2023 Subject: Request for Confidentiality FCC ID: 2A22E-WWYLT262 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☒ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 Sincerely, Signature: Name: Snow Zhong Title: Senior Manager

Micronet Union Technology(Chengdu) Co., Ltd Room 502, Building 5, N.O. 528, Yuefei Road, Shibantan Street, Xindu District, Chengdu, Sichuan, China ____________________________________________________________________________ FCC Software Configuration Control Declaration Date: January 31, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product/ Model Number: AX1500 Wi-Fi 6 Router / T262-T21D, T262-T21X, T262- BXX, T262-PQX, (the last X=A-Z or a-z, which indicates for different appearance, dimension and color.) FCC ID: 2A22E-WWYLT262 Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Signature of applicant Name: Snow Zhong Title: 1/1

Page 1 of 14 FCC ID: 2A22E-WW YLT 262 APPENDIX 2 PHOTOS OF EUT INTERNAL PHOTOS EUT1 Photo EUT1 Photo Page 2 of 14 FCC ID: 2A22E-WW YLT 262 EUT1 Photo EUT1 Photo Page 3 of 14 FCC ID: 2A22E-WW YLT 262 EUT1 Photo EUT1 Photo Page 4 of 14 FCC ID: 2A22E-WW YLT 262 EUT2 Photo EUT2 Photo EUT2 Photo 5G WIFI ANT2 5G WIFI ANT1 2.4G WIFI ANT1 2.4G WIFI ANT2 Page 5 of 14 FCC ID: 2A22E-WW YLT 262 EUT2 Photo Page 6 of 14 FCC ID: 2A22E-WW YLT 262 EUT2 Photo EUT3 Photo 2.4G WIFI ANT1 5G WIFI ANT1 5G WIFI ANT2 2.4G WIFI ANT2 Page 7 of 14 FCC ID: 2A22E-WW YLT 262 EUT3 Photo EUT3 Photo Page 8 of 14 FCC ID: 2A22E-WW YLT 262 EUT3 Photo EUT3 Photo Page 9 of 14 FCC ID: 2A22E-WW YLT 262 EUT4 Photo EUT4 Photo Page 10 of 14 FCC ID: 2A22E-WW YLT 262 EUT4 Photo EUT4 Photo Page 11 of 14 FCC ID: 2A22E-WW YLT 262 EUT4 Photo EUT4 Photo Page 12 of 14 FCC ID: 2A22E-WW YLT 262 EUT5 Photo EUT5 Photo Page 13 of 14 FCC ID: 2A22E-WW YLT 262 EUT5 Photo EUT5 Photo Page 14 of 14 FCC ID: 2A22E-WW YLT 262 EUT5 Photo EUT5 Photo

Report No.: FCC022022-03976MPE Page 1 of 5 TIRT-TRF/FCC01-2(E):2021A0 Product Name: AX1500 Wi-Fi 6 Router Report No: FCC022022-03976MPE Product Model: T262-T21D Security Classification: Open Version: V1.0 Total Page: 7 TIRT Testing Report Prepared By: Checked By: Approved By: Stone Tang Randy Lv Daniel Chen Report No.: FCC022022-03976MPE Page 2 of 5 TIRT-TRF/FCC01-2(E):2021A0 FCC RF EXPOSURE REPORT FCC ID: 2A22E-WWYLT262 Equipment : AX1500 Wi-Fi 6 Router Model No. : T262-T21D, T262-T21X, T262-BXX, T262-PQX, (the last X=A-Z or a-z, which indicates for different appearance, dimension and color.) Trademark : N/A Product No. : 20220804012992 Applicant : Micronet Union Technology(Chengdu) Co., Ltd Address : Room 502, Building 5, N.O. 528, Yuefei Road, Shibantan Street, Xindu District, Chengdu, Sichuan, China Manufacturer : Micronet Union Technology(Chengdu) Co., Ltd Address : Room 502, Building 5, N.O. 528, Yuefei Road, Shibantan Street, Xindu District, Chengdu, Sichuan, China Receipt Date : 2022.08.04 Issued Date : 2022.12.30 Test Sample : Final Sample Standard(s) : FCC 47 CFR Part 1.1310 & FCC 47 CFR Part 2.1091 • The above equipment has been tested and found compliance with the requirement of the relative standards by TIRT Inc. • The test result referred exclusively to the presented test model /sample. • Without written approval of TIRT Inc., the test report shall not be reproduced except in full. Lab: Beijing TIRT Technology Service Co.,Ltd Shenzhen Add: 101, 3 # Factory Building, Gongjin Electronics Shatin Community, Kengzi Street, Pingshan District, Shenzhen, China TEL: +86-0755-27087573 Report No.: FCC022022-03976MPE Page 3 of 5 TIRT-TRF/FCC01-2(E):2021A0 History of this test report Original Report Issue Date: 2022.12.30 ● No additional attachment ○ Additional attachments were issued following record Attachment No. Issue Date Description Report No.: FCC022022-03976MPE Page 4 of 5 TIRT-TRF/FCC01-2(E):2021A0 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna For 2.4GWiFi EUT Antenna gain Antenna Type EUT1/EUT4/EUT5 Ant1: 5.25dBi, Ant2: 5.32dBi, Integral antenna EUT2/EUT3 Ant1: 4.32dBi, Ant2: 4.32dBi, Integral antenna For 5GWiFi EUT Antenna gain Antenna Type EUT1/EUT4/EUT5 Ant1: 5.20dBi, Ant2: 5.26dBi, Integral antenna EUT2/EUT3 Ant1: 4.88dBi, Ant2: 6.66dBi, Integral antenna Report No.: FCC022022-03976MPE Page 5 of 5 TIRT-TRF/FCC01-2(E):2021A0 2. TEST RESULTS Worst case as below For EUT1/EUT4/EUT5 Operating Mode Freq. Maximum conducted output power Max. positive tolerance according manufacturer Directional Antenna Gain Calculated maximum EIRP MPE Limit MPE Value (MHz) (dBm) (dBi) (dBm) (mW) (mW/cm 2 ) 2.4G Wifi 2412-2462 15.28 1 8.29 24.57 286.42 1 0.0570 5G Wifi 5180-5825 17.09 1 8.24 26.33 429.54 1 0.0855 For EUT2/EUT3 Operating Mode Freq. Maximum conducted output power Max. positive tolerance according manufacturer Directional Antenna Gain Calculated maximum EIRP MPE Limit MPE Value (MHz) (dBm) (dBi) (dBm) (mW) (mW/cm 2 ) 2.4G Wifi 2412-2462 15.28 1 7.33 23.61 229.61 1 0.0457 5G Wifi 5180-5825 17.09 1 8.83 26.92 492.04 1 0.0979 Note: 1. The calculated distance is 20 cm. 2. The 2.4G Wifi function can transmit at the same time with the 5G Wifi function Simultaneous transmitting consideration The ratio= MPE2.4G Wifi/limit+MPE5G Wifi/limit=0.0457/1+0.0979/1=0.1436<1.0 Result: Compliant （END OF REPORT）

深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2020 Free Walk Corporation. All rights reserved. ADD: 深圳市宝安西乡鹤洲西区工业园2栋3楼 Email: [email protected] TEL: 86-0755-29955983 FAX: 86-0755-29955983 承认书 客户（Customer）: 微网力合 产品（Product）: 5G-外置天线(连接线线长L=1 70mm) 型号（Model）: 51010049 料号（Part Number）: Z01-50105-R01 制作人（Written By ）: 李文科 签发时间（Issued Date）: 客户CUSTOMER 工程部 ENGINEER R&D DEPT 品质部 QUALITY DEPT 批准 APPROVED Free Walk 射频 R&D DEPT 工程部 ENGINEER R&D DEPT 批准 APPROVED 李文科古政华 2022-02-14 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2020 Free Walk Corporation. All rights reserved. 文件变更履历表 表单编号:QR-ZYX-084 版本：A0 产品型号 文件变更记录 序号 变更类 型 文件编号 变更日期 变更内容说明 制作/修订 版本 备注 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2020 Free Walk Corporation. All rights reserved. 目 录 Index 一、 封面 （Cover）·············································1 二、 文件变更履历表(Document Change Resume)·············2 三、 目录 （Index）··············································3 四、 基本参数（The basic parameters）······························4 五、 工程图纸（Product Drawing）·································4 六、 测试设备（Test Equipment & Conditions）·····················6 七、 性能测试报告（Test Report）·······························7-10 八、 天线图片 (Antenna Picture) ·····························11 九、 RoHS报告清单（RoHS report list）·························12 十、 包装方式（TEE PACKING WAY）····························13 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2020 Free Walk Corporation. All rights reserved. The basic parameters A. Electrical Characteristics Frequency 5150 MHz ~5850MHz VSWR ≤2 Efficiency >60% Impedance 50 Ohm Polarization Linear Gain 5dBi±1 B. Material & Mechanical Characteristics Material of Radiator Cable Type Φ1.37mm Black Connector Type 一代IPEX Dimension C. Environmental Operation Temperature - 20 ̊C ~ + 60 ̊C Storage Temperature - 40 ̊C ~ + 80 ̊C Detail A 序 号 品 名 材 料 / 规 格 颜 色 数 量 备 注 射 频 线 1.37 同 轴 线 ABS+PC 1 黑 色 11 套 杆 ABS 下 固 定 座 PCB 黑 色 弹 簧 碳 钢 银 色 FR-4 11 白 色 白 色 端 子 第 一 代 金 色 1 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2020 Free Walk Corporation. All rights reserved. Test Equipment & Conditions 1． Network Analyzers : Agilent 8753D 5071C 2． Communications Test Set: Agilent 8960 CMW500 3． 3D Chamber Test System 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2020 Free Walk Corporation. All rights reserved. 测试数据 SWR Smith 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2020 Free Walk Corporation. All rights reserved. 效率&增益: Efficency&Gain Frequency / MHz Efficiency / % Gain/ dBi 5150 71.52 4.96 5200 70.63 5.25 5250 70.22 4.87 5300 71.35 5.15 5350 69.34 4.92 5400 72.13 4.82 5450 72.35 5.26 5500 70.34 4.87 5550 69.28 4.55 5600 72.15 4.89 5650 70.36 5.06 5700 69.24 4.95 5750 70.35 4.73 5800 68.47 4.93 5850 69.37 4.82 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2020 Free Walk Corporation. All rights reserved. 方向图（3D图） Patten 5150MHz 5550MHz 5850MHz 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2023 Free Walk Corporation. All rights reserved. 2D图 XOY面 ZOX面 ZOY面 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2020 Free Walk Corporation. All rights reserved. 天线图片 序号原材料名称 原材料供应商（生产 厂家） 测试机构报告编号检测日期检测到期日期 1PCB炜润SGSSZXEC21022280022021.7.212022.7.20 2镀磷青铜5210紫金铜业SGSCANEC21023536022021.2.252022.2.25 3镀锡圆铜线坤久CTIA2200355918101001E2020.10.172021.10.17 4锡泰源SGSCANEC21033326082021.3.162022.3.16 5铜箔安徽铜箔SGSA2200448225101001C2020.12.112021.12.11 6TPE絨维SGSETR21106223M012021.2.12022.2.1 7氟塑料FEP巨化SGSNGBML21002321012021.1.272022.1.27 8 要求： 1. 所送元器件材料报告必须是按照欧盟落实要求拆分到不可拆分材料的检测报告。 此处盖公章 提供报告要求电子档：报告可以清单一起扫描；也可以分开扫描，但要对应编号，以便查询 提供报告要求电子档：报告可以清单一起扫描；也可以分开扫描，但要对应编号，以便查询 深圳自由行通信技术有限公司 WIFI天线 物料部件ROHS报告清单 2. 本公司认可如下九家检测机构提供的报告，SGS, CTI ,ITS,赛宝,诺尼，CCIC，bv，STS，set 3. 所有若是检测报告首页需盖章本公司公章侧面加盖骑缝章是各一份报告，不得涂改伪造提供价报告，供货商提供报告，必须先自行审核，确保所送报告有效正确完整，内容清晰可辨

深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2021 Free Walk Corporation. All rights reserved. ADD: 深圳市宝安西乡鹤洲西区工业园2栋3楼 Email: [email protected] TEL: 86-0755-29955983 FAX: 86-0755-29955983 承认书 客户（Customer）: 微网力合 产品（Product）: 5G-外置天线(连接线线长L=7 0mm) 型号（Model）: 51010050 料号（Part Number）: Z01-50104-R01 制作人（Written By ）: 李文科 签发时间（Issued Date）: 客户CUSTOMER 工程部 ENGINEER R&D DEPT 品质部 QUALITY DEPT 批准 APPROVED Free Walk 射频 R&D DEPT 工程部 ENGINEER R&D DEPT 批准 APPROVED 李文科古政华 2022-02-14 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2021 Free Walk Corporation. All rights reserved. 文件变更履历表 表单编号:QR-ZYX-084 版本：A0 产品型号 文件变更记录 序号 变更类 型 文件编号 变更日期 变更内容说明 制作/修订 版本 备注 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2021 Free Walk Corporation. All rights reserved. 目 录 Index 一、 封面 （Cover）·············································1 二、 文件变更履历表(Document Change Resume)·············2 三、 目录 （Index）··············································3 四、 基本参数（The basic parameters）······························4 五、 工程图纸（Product Drawing）·································4 六、 测试设备（Test Equipment & Conditions）·····················6 七、 性能测试报告（Test Report）·······························7-10 八、 天线图片 (Antenna Picture) ·····························11 九、 RoHS报告清单（RoHS report list）·························12 十、 包装方式（TEE PACKING WAY）····························13 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2021 Free Walk Corporation. All rights reserved. The basic parameters A. Electrical Characteristics Frequency 5150 MHz ~5850MHz VSWR ≤2 Efficiency >60% Impedance 50 Ohm Polarization Linear Gain 5dBi±1 B. Material & Mechanical Characteristics Material of Radiator Cable Type Φ1.37mm Black Connector Type 一代IPEX Dimension C. Environmental Operation Temperature - 20 ̊C ~ + 60 ̊C Storage Temperature - 40 ̊C ~ + 80 ̊C Detail A 序 号 品 名 材 料 / 规 格 颜 色 数 量 备 注 射 频 线 1.37 同 轴 线 ABS+PC 1 黑 色 11 套 杆 ABS 下 固 定 座 PCB 黑 色 弹 簧 碳 钢 银 色 FR-4 11 白 色 白 色 端 子 第 一 代 金 色 1 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2021 Free Walk Corporation. All rights reserved. Test Equipment & Conditions 1． Network Analyzers : Agilent 8753D 5071C 2． Communications Test Set: Agilent 8960 CMW500 3． 3D Chamber Test System 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2021 Free Walk Corporation. All rights reserved. 测试数据 SWR Smith 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2021 Free Walk Corporation. All rights reserved. 效率&增益: Efficency&Gain Frequency / MHz Efficiency / % Gain/ dBi 5150 71.09 5.07 5200 70.95 5.04 5250 67.54 4.80 5300 72.42 5.18 5350 70.95 4.87 5400 73.83 4.70 5450 74.78 5.20 5500 68.61 4.90 5550 67.02 4.73 5600 72.27 4.83 5650 69.98 4.85 5700 68.21 4.70 5750 69.29 4.80 5800 68.36 4.82 5850 70.26 4.80 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2021 Free Walk Corporation. All rights reserved. 方向图（3D图） Patten 5150MHz 5550MHz 5850MHz 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2023 Free Walk Corporation. All rights reserved. 2D图 XOY面 ZOX面 ZOY面 深圳自由行通信技术有限公司 Shenzhen Free Walk Communication Technology Co. LTD Free Walk Proprietary & Confidential © 2021 Free Walk Corporation. All rights reserved. 天线图片 序号原材料名称 原材料供应商（生产 厂家） 测试机构报告编号检测日期检测到期日期 1PCB炜润SGSSZXEC21022280022021.7.212022.7.20 2镀磷青铜5210紫金铜业SGSCANEC21023536022021.2.252022.2.25 3镀锡圆铜线坤久CTIA2200355918101001E2020.10.172021.10.17 4锡泰源SGSCANEC21033326082021.3.162022.3.16 5铜箔安徽铜箔SGSA2200448225101001C2020.12.112021.12.11 6TPE絨维SGSETR21106223M012021.2.12022.2.1 7氟塑料FEP巨化SGSNGBML21002321012021.1.272022.1.27 8 要求： 1. 所送元器件材料报告必须是按照欧盟落实要求拆分到不可拆分材料的检测报告。 此处盖公章 提供报告要求电子档：报告可以清单一起扫描；也可以分开扫描，但要对应编号，以便查询 提供报告要求电子档：报告可以清单一起扫描；也可以分开扫描，但要对应编号，以便查询 深圳自由行通信技术有限公司 WIFI天线 物料部件ROHS报告清单 2. 本公司认可如下九家检测机构提供的报告，SGS, CTI ,ITS,赛宝,诺尼，CCIC，bv，STS，set 3. 所有若是检测报告首页需盖章本公司公章侧面加盖骑缝章是各一份报告，不得涂改伪造提供价报告，供货商提供报告，必须先自行审核，确保所送报告有效正确完整，内容清晰可辨

Report No.: BL-SZ22A0711-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Dongguan ivy technology co., LTD Address: Room 303, Unit 2, Building 8, Science and Technology Second Road, Songshan Lake Park, Dongguan City, Guangdong Province, China Equipment Type: 2.4-2.5GHz Antenna Model Name: 51010085 Brand Name: N/A Test Standard: ANSI/IEEE Std 149-1979 Test Date: Oct. 19, 2022 Date of Issue: Oct. 27, 2022 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Tolan Tu Approved by: Wei Yanquan (Chief Engineer) _______________ _______________ _______________ Report No.: BL-SZ22A0711-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 14 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Oct. 27, 2022 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 3 1.1 Test Laboratory ................................................................................................................... 3 1.2 Test Location ....................................................................................................................... 3 2 PRODUCT INFORMATION ....................................................................................…

Text truncated - open the document above for the full version.