2A233-AYANEOAIRPLUSTablet Computer

Power On / Power Off / Reboot / Fingerprint In the power-off state, press and hold the power button for 2 seconds to turn on the AYANEO. The joystick ambient light turns on white with high brightness, and the ambient light returns to normal brightness after entering the system interface. In the power-on state, click the screen Window > Power > Shut Down to turn off AYANEO . In the power-on state, press and hold the power button for about 8 seconds to forcibly close AYANEO. (Note: This operation is not recommended for normal usage scenarios as it may pose a risk of data corruption) Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference thatmay cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The SAR was tested for the device in thebody worn mode. And it can meet the SAR limit of FCC.

Application company: Shenzhen Konkr Technology Co., Ltd Address: Room 215, Building 22, Maker Town, No. 4109, Liuxian Avenue, Pingshan Community, Taoyuan Street, Nanshan District, Shenzhen,China Tel.: 19926635044 E-Mail: [email protected] Date: 2023-06-21 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Shenzhen Konkr Technology Co., Ltd, hereby authorize Shenzhen Accurate Technology Co., Ltd. to act as a laboratory for testing and test report generation for the following project(s): (Product description: Tablet Computer, FCC ID: 2A233-AYANEOAIRPLUS) For use in America this device only support/enable BT(BDR,EDR,BLE1M& BLE 2M), 2.4GWiFi(2412-2462MHz), 5GWiFi(Band1:5150- 5250MHz&Band4:5725-5850MHz), The other functions have been shielded by the manufacturer using the software and the end user cannot activate. Sincerely, Signature: Guoyou Zhong Product manager

U.S. AGENT LETTER OF ATTESTATION Date: 2023-06-02 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(7)Filing FCC ID: 2A233-AYANEOAIRPLUS Shenzhen Konkr Technology Co., Ltd certifies that, as of the date of the filing of the application, Iconsigh Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Shenzhen Konkr Technology Co., Ltd accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Iconsigh Inc. Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature: Applicant: Shenzhen Konkr Technology Co., Ltd Address: Room 215, Building 22, Maker Town, No. 4109, Liuxian Avenue, Pingshan Community, Taoyuan Street, Nanshan District, Shenzhen,China FRN: 0031334113 Tel: 19926635044 Email: [email protected] Signed by (printed name): Guoyou Zhong Signature: §

Application company: Shenzhen Konkr Technology Co., Ltd Address: Room 215, Building 22, Maker Town, No. 4109, Liuxian Avenue, Pingshan Community, Taoyuan Street, Nanshan District, Shenzhen,China Tel.: 19926635044 E-Mail: [email protected] FCC Confidential Authorization Date: 2023-07-07 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2A233-AYANEOAIRPLUS In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Shenzhen Konkr Technology Co., Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description • U-NII Device Security Declaration The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Contact person: Guoyou Zhong Title: Product manager

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF External Photos Page 1 of 4 External Photos Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF External Photos Page 2 of 4 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF External Photos Page 3 of 4 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF External Photos Page 4 of 4

Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-RF-00 EXHIBITA-FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the time purchase (Labeling requirements per 2.295)

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 1 of 17 Internal Photos Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 2 of 17 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 3 of 17 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 4 of 17 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 5 of 17 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 6 of 17

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 7 of 17 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 8 of 17 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 9 of 17 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 10 of 17 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 11 of 17 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 12 of 17

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 13 of 17 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 14 of 17 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 15 of 17 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 16 of 17 ANT 1: BT&WIFI ANT 2: WIFI Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-15912E-RF Internal Photos Page 17 of 17

Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 1 of 4 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Phantom Type: Twin SAM Phantom ; Type: QD000 P40 CD; Serial: 1744 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 2 of 4 Body Front Setup Photo Body Back Setup Photo Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 3 of 4 Body Left Setup Photo Body Right Setup Photo Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 4 of 4 Body Bottom Setup Photo

Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 1 of 23 APPENDIX C PROBE CALIBRATION CERTIFICATES Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 2 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 3 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 4 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 5 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 6 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 7 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 8 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 9 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 10 of 23 APPENDIX D DIPOLE CALIBRATION CERTIFICATES Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 11 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 12 of 23

Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 13 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 14 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 15 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 16 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 17 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 18 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 19 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 20 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 21 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 22 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Page 23 of 23

Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. Shenzhen Accurate Technology Co., Ltd. is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. 1/F., Building A, Changyuan New Material Port, Science & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R. China Tel: +86 755-26503290 Fax: +86 755-26503290 Web: www.atc-lab.com Version 39: 2023-01-30 Page 1 of 57 FCC SAR TEST REPORT Applicant Name : Shenzhen Konkr Technology Co.,Ltd Address : Room 215, Building 22, Maker Town, No. 4109, Liuxian Avenue, Pingshan Community, Taoyuan Street, Nanshan District, Shenzhen, China Report Number : RA230331-15912E-SA FCC ID: 2A233-AYANEOAIRPLUS Test Standard (s) FCC Part 2.1093 Sample Description Product Type: Tablet Computer Model No.: AYANEO AIR Plus Multiple Models: N/A Trade Mark: AYANEO Date Received: 2023/04/03 Date of Test: 2023/06/11-2023/06/14 Report Date: 2023/07/07 Test Result: Pass* * In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Lance Li Candy Li EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Version 39: 2023-01-30 Page 2 of 57 FCC SAR Attestation of Test Results MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) 2.4G Wi-Fi 1g Body SAR 0.20 1.6 5.2G Wi-Fi 1g Body SAR 0.43 5.8G Wi-Fi 1g Body SAR 0.81 Simultaneous 1g Body SAR 1.51 Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices RF Exposure Procedures: TCB Workshop October 2016(Bluetooth Duty Factor) IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 248227 D01 802 11 Wi-Fi SAR v02r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in Accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-SA Version 39: 2023-01-30 Page 3 of 57 FCC SAR TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 EUT DESCRIPTION ................................................................................................................................................... 5 TECHNICAL SPECIFICATION ............................................................................................................................................. 5 REFERENCE, STANDARDS, AND GUIDELINES ................................................................................................. 6 SAR LIMITS ..................................................................................................................................................................... 7 FACILITIES ................................................................................................................................................................. 8 DESCRIPTION OF TEST SYSTEM .......................................................................................................................... 9 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 15 EQUIPMENTS LIST & CALIBRATION INFORMATION ........................................................................................................ 15 SAR MEASUREMENT SYSTEM VERIFICATION ............................................................................................. 16 LIQUID VERIFICATION ................................................................................................................................................... 16 SYSTEM ACCURACY VERIFICATION ............................................................................................................................... 17 SAR SYSTEM VALIDATION DATA ......................................................................................................................... 18 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 21 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS .................................................................................. 21 TEST DISTANCE FOR SAR EVALUATION ........................................................................................................................ 21 SAR EVALUATION PROCEDURE .................................................................................................................................... 22 CONDUCTED OUTPUT POWER MEASUREMENT .......................................................................................... 23 TEST PROCEDURE ....................................................................................…

Text truncated - open the document above for the full version.

ShenZhen Accurate Technology CO., Ltd Report No.: RA230331-15912E-SA Page 1 of 21 Test Plot 1#: DUT: AYANEO AIR Plus; Type: Tablet Computer; Serial: 249A_1; Communication System: UID 0, 2.4G DTS (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used : f = 2437 MHz; σ = 1.818 S/m; ε r = 39.249; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN3701; ConvF(7.25, 7.25, 7.25) @ 2437 MHz; Calibrated: 2023/03/15 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1325; Calibrated: 2022/08/29 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Body Front/WLAN 802.11b Mid/Area Scan (11x13x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.109 W/kg Body Front/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.485 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 0.0870 W/kg SAR(1 g) = 0.082 W/kg; SAR(10 g) = 0.067 W/kg Maximum value of SAR (measured) = 0.0861 W/kg 0 dB = 0.0861 W/kg = -10.65 dBW/kg ShenZhen Accurate Technology CO., Ltd Report No.: RA230331-15912E-SA Page 2 of 21 Test Plot 2#: DUT: AYANEO AIR Plus; Type: Tablet Computer; Serial: 249A_1; Communication System: UID 0, 2.4G DTS (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used : f = 2437 MHz; σ = 1.818 S/m; ε r = 39.249; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN3701; ConvF(7.25, 7.25, 7.25) @ 2437 MHz; Calibrated: 2023/03/15 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1325; Calibrated: 2022/08/29 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Body Back/WLAN 802.11b Mid/Area Scan (11x13x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.223 W/kg Body Back/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.702 V/m; Power Drift = 0.16 dB Peak SAR (extrapolated) = 0.177 W/kg SAR(1 g) = 0.159 W/kg; SAR(10 g) = 0.116 W/kg Maximum value of SAR (measured) = 0.171 W/kg 0 dB = 0.171 W/kg = -7.67 dBW/kg ShenZhen Accurate Technology CO., Ltd Report No.: RA230331-15912E-SA Page 3 of 21 Test Plot 3#: DUT: AYANEO AIR Plus; Type: Tablet Computer; Serial: 249A_1; Communication System: UID 0, 2.4G DTS (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used : f = 2437 MHz; σ = 1.818 S/m; ε r = 39.249; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN3701; ConvF(7.25, 7.25, 7.25) @ 2437 MHz; Calibrated: 2023/03/15 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1325; Calibrated: 2022/08/29 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Body Right/WLAN 802.11b Mid/Area Scan (11x13x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.173 W/kg Body Right/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.916 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 0.153 W/kg SAR(1 g) = 0.125 W/kg; SAR(10 g) = 0.086 W/kg Maximum value of SAR (measured) = 0.139 W/kg 0 dB = 0.139 W/kg = -8.57 dBW/kg ShenZhen Accurate Technology CO., Ltd Report No.: RA230331-15912E-SA Page 4 of 21 Test Plot 4#: DUT: AYANEO AIR Plus; Type: Tablet Computer; Serial: 249A_1; Communication System: UID 0, 2.4G DTS (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used : f = 2437 MHz; σ = 1.818 S/m; ε r = 39.249; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN3701; ConvF(7.25, 7.25, 7.25) @ 2437 MHz; Calibrated: 2023/03/15 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1325; Calibrated: 2022/08/29 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Body Bottom/WLAN 802.11b Mid/Area Scan (11x13x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.102 W/kg Body Bottom/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.871 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 0.0870 W/kg SAR(1 g) = 0.078 W/kg; SAR(10 g) = 0.057 W/kg Maximum value of SAR (measured) = 0.0845 W/kg 0 dB = 0.0845 W/kg = -10.73 dBW/kg ShenZhen Accurate Technology CO., Ltd Report No.: RA230331-15912E-SA Page 5 of 21 Test Plot 5#: DUT: AYANEO AIR Plus; Type: Tablet Computer; Serial: 249A_1; Communication System: UID 0, 2.4G DTS (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used : f = 2437 MHz; σ = 1.818 S/m; ε r = 39.249; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN3701; ConvF(7.25, 7.25, 7.25) @ 2437 MHz; Calibrated: 2023/03/15 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1325; Calibrated: 2022/08/29 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Body Front/WLAN 802.11b Mid/Area Scan (13x13x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.102 W/kg Body Front/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.067 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 0.0460 W/kg SAR(1 g) = 0.043 W/kg; SAR(10 g) = 0.041 W/kg Maximum value of SAR (measured) = 0.0462 W/kg 0 dB = 0.0462 W/kg = -13.35 dBW/kg ShenZhen Accurate Technology CO., Ltd Report No.: RA230331-15912E-SA Page 6 of 21 Test Plot 6#: DUT: AYANEO AIR Plus; Type: Tablet Computer; Serial: 249A_1; Communication System: UID 0, 2.4G DTS (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used : f = 2437 MHz; σ = 1.818 S/m; ε r = 39.249; ρ = 1000 kg/m 3 Phantom section: Flat Section…

Text truncated - open the document above for the full version.

Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. Shenzhen Accurate Technology Co., Ltd. is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. 1/F., Building A, Changyuan New Material Port, Science & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R. China Tel: +86 755-26503290 Fax: +86 755-26503290 Web: www.atc-lab.com Version 17: 2023-01-30 Page 1 of 227 FCC-RF TEST REPORT Applicant Name : Shenzhen Konkr Technology Co.,Ltd Address : Room 215, Building 22, Maker Town, No. 4109, Liuxian Avenue, Pingshan Community, Taoyuan Street, Nanshan District, Shenzhen, China Report Number : RA230331-15912E-RF-00G FCC ID: 2A233-AYANEOAIRPLUS Test Standard (s) FCC PART 15.407 Sample Description Product: Tablet Computer Tested Model: AYANEO AIR Plus Trade Mark AYANEO Date Received: 2023-03-31 Date of Test 2023-05-23 to 2023-07-20 Report Date: 2023-07-20 Test Result: PASS* * In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Roger.Ling Candy Li EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-RF-00G Version 17: 2023-01-30 Page 2 of 227 FCC-RF TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 GENERAL INFORMATION ....................................................................................................................................... 5 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 5 OBJECTIVE ................................................................................................................................................................... 5 TEST METHODOLOGY .................................................................................................................................................. 5 MEASUREMENT UNCERTAINTY .................................................................................................................................... 6 TEST FACILITY ............................................................................................................................................................. 6 SYSTEM TEST CONFIGURATION .......................................................................................................................... 7 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 7 EUT EXERCISE SOFTWARE .......................................................................................................................................... 8 DUTY CYCLE ................................................................................................................................................................ 9 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 9 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 9 EXTERNAL I/O CABLE .................................................................................................................................................. 9 BLOCK DIAGRAM OF TEST SETUP .............................................................................................................................. 10 SUMMARY OF TEST RESULTS ............................................................................................................................. 11 TEST EQUIPMENT LIST ......................................................................................................................................... 12 FCC §1.1307(b)&§2.1093 - RF EXPOSURE ............................................................................................................. 14 FCC §15.203 – ANTENNA REQUIREMENT .......................................................................................................... 15 APPLICABLE STANDARD ............................................................................................................................................ 15 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 15 FCC §15.407 (B) (8) §15.207 (A) – CONDUCTED EMISSIONS ............................................................................ 16 APPLICABLE STANDARD ............................................................................................................................................ 16 EUT SETUP ................................................................................................................................................................ 16 EMI TEST RECEIVER SETUP ....................................................................................................................................... 16 TEST PROCEDURE ...................................................................................................................................................... 16 TEST DATA ...............................…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-15912E-RF-00G Version 17: 2023-01-30 Page 68 of 227 FCC-RF 5725-5850 MHz Test Mode Channel Antenna OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11A MIMO 5745 Ant1 17.463 5736.3287 5753.7912 No transmitted signal in the 99% bandwidth extends into the U-NII-2C band PASS Ant2 17.143 5736.4885 5753.6314 PASS 5785 Ant1 17.542 5776.2088 5793.7512 PASS Ant2 17.143 5776.4486 5793.5914 PASS 5825 Ant1 17.542 5816.2887 5833.8312 PASS Ant2 17.183 5816.5285 5833.7113 PASS 11N20MIMO 5745 Ant1 18.382 5735.8492 5754.2308 PASS Ant2 18.382 5735.8891 5754.2707 PASS 5785 Ant1 18.382 5775.8092 5794.1908 PASS Ant2 18.342 5775.8492 5794.1908 PASS 5825 Ant1 18.422 5815.8891 5834.3107 PASS Ant2 18.342 5815.9690 5834.3107 PASS 11N40MIMO 5755 Ant1 36.284 5737.0180 5773.3017 PASS Ant2 36.364 5736.9381 5773.3017 PASS 5795 Ant1 36.364 5776.7782 5813.1419 PASS Ant2 36.364 5776.8581 5813.2218 PASS 11AC20MIMO 5745 Ant1 18.342 5735.8891 5754.2308 PASS Ant2 18.062 5736.0490 5754.1109 PASS 5785 Ant1 18.382 5775.8092 5794.1908 PASS Ant2 18.022 5776.0889 5794.1109 PASS 5825 Ant1 18.382 5815.8891 5834.2707 PASS Ant2 18.062 5816.0889 5834.1…

Text truncated - open the document above for the full version.