2A23B-V16XXMini PCs

User Manual For V1610 Mini PC V2024 1.0 This User Manual was designed for Protectli V16XX series Mini PCs. Including the typical model V1610 which is a 6 port networks hard ware. 1. Application The most important consideration for choosing your hardware is what application it will be used for. The Protectli Vault can be used in a number of different applications. Customers have deployed Vaults as Windows Clients, Linux Desktops and Servers, Hypervisors, and of course firewalls. Thinking about the requirements for your use case will help to narrow your choice when it comes to picking your Vault. Our recommendation: Simple client machines will work great on our smaller 6-port Vaults, while you may want to consider a 4-port or 6-port for firewall or hypervisor applications. 2. Ports The number of ethernet ports you need depends on your application. Firewalls can be configured on as little as a two physical ports, but for simplicity and throughput, consider that you may want multiple physical ports to segment traffic for multiple networks (i.e. a ‘secure’ network , an ‘IoT’ network, a ‘guest’ network, etc). For hypervisor applications, consider that a physical port can be ‘passed through’ to an individual virtual machine so multiple virtual machines may need more physical ports. The Vault is currently available in 2-Port, 4-Port, and 6-Port variations. In addition, some models have 2.5G or 10G Ethernet ports. Our recommendation: It is smart to think about future-proofing your Vault from the start, s o consider a model wit h more Ethernet ports and 3. Throughput Requirements Every Vault’s Ethernet ports are PCIe connected to the CPU and can run at linerate of either 1 Gbps, 2.5 Gbps or 10 Gbps. FIREWALL As a firewall, every Vault has tested at full wire speed between ports using iperf as a s ynthetic load. As such, for basic r outing applications any Vault is capable of gigabit throughput. However, in most firewall application, additional services will be turned on that consume CPU and thus may reduce throughput. These include modest services such as DHCP and DNS or heavy CPU users such as Deep Packet Inspection (DPI). A key consideration is Virtual Private Networking (VPN) support. VPN requires processor intensive encryption. Our recommendation: With a modest throughput of up to ~300 Mbps, you can run many firewall applications in ‘basic’ routing and firewall mode on any of our 2- Port or 4- Port port models. With increased throughput (especially gigabit service) or if implementing VPN, DPI, IPS/IDS, SNORT, Sensei, or other firewall add-ons, we recommend a Vault with a performant CPU such as the VP4600 or VP6600. Note: For sample VPN throughput tests we have performed to show baselined performance across all models, check out our OpenVPN and IPSEC VPN tests. HYPERVISOR For hypervisor applications, the Vault’s multiple gigabit ports are ideal for dedicated physical connections passed through to individual VM’s. Our recommendation: In most circumstances, using a Vault as a hypervisor means that the user will want to run multiple operating systems, requiring CPU, memory, and network connections. As such, we recommend the 6- Port Units . 4. Security Security is an important consideration for any network or compute appliance. coreboot is available as an open source BIOS on all the Vaults. In addition, the Vault Pro (VP) series have additional security features. Our recommendation: If security is important, we recommend coreboot in general and the advanced security features available on the Vault Pro Series. 5. Workload and Hardware Requirements by OS The OS you choose to run can greatly affect the performance requirements of the Vault. Some customers use the Vault to run a basic firewall, while others use it as a hypervisor, desktop, or SD-WAN. Therefore, hardware requirements vary widely. Here are a few examples of usage that typically require a stronger CPU. •Routing all network traffic through a VPN requires higher CPU clock speeds, especially at higher throughput. Click here for more performance results. •Running add-on packages like pfBlocker (pfSense), SNORT (pfSense), or Sensei (OPNsense) •Using the Vault to run a hypervisor, and/or having other software running on the same device. Here are hardware recommendations for common OS’s: 6. The V1610 Photo The Front Side The Back Side 7. Th e Specifications 8. Th e Steps For Users Step One: Plug the power adaptor Step Two: Connect any display with HDMI cable Step Three: Press the power-on button, color blue Step four: Install the OS you needed Step Five: Plug in the networks cable and make setting with OS FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmfu…

Text truncated - open the document above for the full version.

Dewolf Technologies, Inc (DBA Protectli) 1315 Hot Springs Way STE 107 Vista California United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-8-22 U.S. Agent Designation Dewolf Technologies, Inc (DBA Protectli) acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2A23B-V16XX): Name and company of U.S. agent: Dewolf Technologies, Inc (DBA Protectli) Physical U.S. address of agent: 1315 Hot Springs Way STE 107 Vista California United States FRN of U.S. agent: 0031329642 Email address of U.S. agent: [email protected] Dewolf Technologies, Inc (DBA Protectli) acknowledges their obligation to accept service of process on behalf of Dewolf Technologies, Inc (DBA Protectli). Dewolf Technologies, Inc (DBA Protectli) with the FRN [0031329642] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Brent Cowing Manager Dewolf Technologies, Inc (DBA Protectli) Signature Brent Cowing Manager Dewolf Technologies, Inc (DBA Protectli) 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

Dewolf Technologies, Inc (DBA Protectli) Add: 1315 Hot Springs Way STE 107 Vista California United States Date: 2024-8-22 FCC ID: 2A23B-V16XX Dear Sir/Madam, We, Dewolf Technologies, Inc (DBA Protectli) Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: Mini PCs Model no.: V1610, V1210, V1211, V1810 Sincerely, Name/Title： Brent Cowing/Manager Company: Dewolf Technologies, Inc (DBA Protectli) Address: 1315 Hot Springs Way STE 107 Vista California United States Phone: 1-760-230-5899 Fax: N/A E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-8-22> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2A23B-V16XX V1610 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Brent Cowing/Manager Company: Dewolf Technologies, Inc (DBA Protectli) Address: 1315 Hot Springs Way STE 107 Vista California United States Phone: 1-760-230-5899 Fax: N/A E-Mail: [email protected]

Dewolf Technologies, Inc (DBA Protectli) 1315 Hot Springs Way STE 107 Vista California United States Date: 2024-8-22 FCC ID: 2A23B-V16XX Model Number: V1610 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Dewolf Technologies, Inc (DBA Protectli), declare that this EUT (FCC ID: 2A23B-V16XX) doesn’t have Ad Hoc mode function on “non-US/Canada frequencies”. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title： Brent Cowing/Manager Company: Dewolf Technologies, Inc (DBA Protectli) Address: 1315 Hot Springs Way STE 107 Vista California United States Phone: 1-760-230-5899 Fax: N/A E-Mail: [email protected]

Dewolf Technologies, Inc (DBA Protectli) 1315 Hot Springs Way STE 107 Vista California United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-8-22 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2A23B-V16XX including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Brent Cowing/Manager Company: Dewolf Technologies, Inc (DBA Protectli) Address: 1315 Hot Springs Way STE 107 Vista California United States Phone: 1-760-230-5899 Fax: N/A E-Mail: [email protected]

FCC ID: 2A23B-V16XX External Photos of the EUT FCC ID: 2A23B-V16XX FCC ID: 2A23B-V16XX

Label and Location Size: L: 3.0cm*W: 2.0cm Label and Location FCC ID : 2A23B-V16XX

FCC ID: 2A23B-V16XX Internal Photos of the EUT WIFI ANT1 WIFI ANT2 FCC ID: 2A23B-V16XX FCC ID: 2A23B-V16XX FCC ID: 2A23B-V16XX FCC ID: 2A23B-V16XX FCC ID: 2A23B-V16XX FCC ID: 2A23B-V16XX FCC ID: 2A23B-V16XX FCC ID: 2A23B-V16XX

RF Exposure evaluation FCC ID: 2A23B-V16XX Exposure category: General population/uncontrolled environment EUT Type: Production Unit Device Type: Mobile Device 1. Reference According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. KDB447498 D01: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 2. Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 3. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 4. Antenna Information L4K1 can only use antennas certificated as follows provided by manufacturer; Antenna No. Model No. of antenna: Type of antenna: Gain of the antenna (Max.) Frequency range: 2.4GWIFI / External Antenna 2.00dBi for 2400-2500MHz for ANT 1 2.35dBi for 2400-2500MHz for ANT 2 5. Manufacturing Tolerance WIFI(Peak) ANT1 Frequency (MHz) 11b 2412 2437 2462 Target (dBm) 14.0 14.0 14.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11g 2412 2437 2462 Target (dBm) 13.0 13.0 13.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11n(HT20) 2412 2437 2462 Target (dBm) 13.0 13.0 13.0 Tolerance ± (dB) 1.0 1.0 1.0 WIFI(Peak) ANT2 Frequency (MHz) 11b 2412 2437 2462 Target (dBm) 14.0 14.0 13.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11g 2412 2437 2462 Target (dBm) 13.0 13.0 13.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11n(HT20) 2412 2437 2462 Target (dBm) 13.0 13.0 13.0 Tolerance ± (dB) 1.0 1.0 1.0 6. Standalone MPE Result As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna is refer to section 4, the RF power density can be obtained. Modulation Type Output power Antenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW 2.4GWIFI ANT1 15.0 31.6228 2.0 1.5849 0.0100 1.0000 2.4GWIFI ANT2 15.0 31.6228 2.35 1.7179 0.0108 1.0000 Remark: 1. Output power (Peak) including turn-up tolerance; 2. MPE evaluate distance is 20cm from user manual provide by manufacturer. 7. simultaneous MPE Result 2.4GWIFI ANT1 MPE (Ratio) 2.4GWIFI ANT2 MPE (Ratio) simultaneous MPE (Ratio) MPE Limits (Ratio) 0.0100 0.0108 0.0208 1.0000 8. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. ----------------THE END OF REPORT---------------

1. Antenna Description: Antenna type External antenna Model V1610 Frequency range 2400-2500MHz Manufacturer Shenzhen Gowin Solution Co.,Ltd. ANT Peak Gain 2.00 dBi 2. Antenna Photo: Length :52.06 mm Width:11.22 mm 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz

1. Antenna Description: Antenna type External antenna Model V1610 Frequency range 2400-2500MHz Manufacturer Shenzhen Gowin Solution Co.,Ltd. ANT Peak Gain 2.35 dBi 2. Antenna Photo: Length :52.06 mm Width:11.22 mm 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID............................................. : CTA24081200601 2A23B-V16XX Compiled by ( position+printed name+signature) . : File administrators Jinghua Xiao Supervised by ( position+printed name+signature) . : Project Engineer Xudong Zhang Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Aug. 14, 2024 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : Dewolf Technologies, Inc (DBA Protectli) Address ............................................ : 1315 Hot Springs Way STE 107 Vista, California United States Test specification ........................... : Standard ........................................... : FCC Part 15.247 TRF Originator .................................. : Shenzhen CTA Testing Technology Co., Ltd. Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Mini PCs Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen Gowin Solution Co.,Ltd. Model/Type reference ...................... : V1610 Listed Models .................................. : V1210, V1211, V1810 Modulation Type ............................... : CCK/DSSS/ OFDM Operation Frequency ........................ : From 2412 - 2462MHz Rating ............................................... : DC 12.0V From external circuit Result ............................................... : PASS Report No.: CTA24081200601 Page 2 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Mini PCs Model /Type : V1610 Serial Models : V1210, V1211, V1810 Applicant : Dewolf Technologies, Inc (DBA Protectli) Address : 1315 Hot Springs Way STE 107 Vista, California United States Manufacturer : Shenzhen Gowin Solution Co.,Ltd. Address : RM212-213, Building C, Liuwei Business Center, Bantian Street, Longgang District, Shenzhen, China 518000 Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24081200601 Page 3 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S ................................................................. 4 2 S U M M A R Y ............................................................................ 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Equipment Under Test 5 2.4 Short description of the Equipment under Test (EUT) 5 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Related Submittal(s) / Grant (s) 6 2.8 Modifications 6 3 T E S T E N V I R O N M E N T .............................................................. 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Test Description 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ........................................... 11 4.1 AC Power Conducted Emission 11 4.2 Radiated Emission 14 4.3 Maximum Peak Conducted Output Power 20 4.4 Power Spectral Density 22 4.5 6dB Bandwidth 28 4.6 Out-of-band Emissions 33 4.7 Antenna Requirement 46 5 T E S T S E T U P P H O T O S O F T H E E U T ......................................... 47 6 P H O T O S O F T H E E U T ........................................................... 48 Report No.: CTA24081200601 Page 4 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 v05r02: Guidance for Compliance Measurements on Digital Transmission Systems (DTS) ,Frequency Hopping Spread Spectrum System(HFSS), and Hybrid System Devices Operating Under §15.247 of The FCC rules. Report No.: CTA24081200601 Page 5 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China T…

Text truncated - open the document above for the full version.

Report No.: CTA24081200601 Page 40 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11b 802.11g Reference Reference CH011 CH01 30MHz-3GHz 30MHz-3GHz 3GHz -25GHz 3GHz -25GHz Report No.: CTA24081200601 Page 41 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11g Reference Reference CH06 CH11 30MHz-3GHz 30MHz-3GHz 3GHz -25GHz 3GHz -25GHz Report No.: CTA24081200601 Page 42 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n20 Reference Reference CH01 CH06 30MHz-3GHz 30MHz-3GHz 3GHz -25GHz 3GHz -25GHz Report No.: CTA24081200601 Page 43 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n20 / Reference CH11 / 30MHz-3GHz / 3GHz -25GHz Report No.: CTA24081200601 Page 44 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Band-edge Measurements for RF Conducted Emissions: ANT 1 802.11b Left bandedge Right bandedge 802.11g Left bandedge Right bandedge 802.11n(HT20) Left bandedge Right bandedge Report No.: CTA24081200601 Page 45 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn ANT 2 802.11b Left bandedge Right bandedge 802.11g Left bandedge Right bandedge 802.11n(HT20) Left bandedge Right bandedge Report No.: CTA24081200601 Page 46 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 4.7 Antenna Requirement Standard Applicable For intentional device, according to FCC 47 CFR Section 15.203: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited FCC CFR Title 47 Part 15 Subpart C Section 15.247(c) (1) (I): (i) Systems operating in the 2400-2483.5 MHz band that is used exclusively for fixed. Point-to-point operations may employ transmitting antennas with directional gain greater than 6dBi provided the maximum conducted output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6dBi. Test Result: The maximum gain of antenna 1 is 2.00 dBi and the maximum gain of antenna 2 is 2.35 dBi. Remark:The antenna gain is provided by the customer , if the data provided by the customer is not accurate, Shenzhen CTA Testing Technology Co., Ltd. does not assume any responsibility. Report No.: CTA24081200601 Page 47 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 5 T e s t S e t u p P h o t o s o f t h e E U T Report No.: CTA24081200601 Page 48 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 6 P h o t o s o f t h e E U T Report No.: CTA24081200601 Page 49 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA24081200601 Page 50 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA24081200601 Page 51 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA24081200601 Page 52 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA24081200601 Page 53 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA24081200601 Page 54 of 58 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA24081200601 Page 55 …

Text truncated - open the document above for the full version.

FCC ID: 2A23B-V16XX Test Setup Photos of the EUT