2A25E-AURAAURA HYBRID SMART HELMET

Smart urban helmet @unit1gear www.unit1gear.com @unit1gear www.unit1gear.com User manual. 1 EN Welcome to the UNIT 1 family. Congrats! Yo u a r e a m o n g t h e f i r s t to eve r ex p e r i e n c e AURA. This embodies the work of creators, designers, engineers and entrepreneurs trying to build something unique. AURA is our best shot at what an hybrid smart helmet should be and our small input towards making the roads safer. Yo u a r e n ow a p a r t o f t h i s s to r y - yo u h e l p e d m a ke t h i s h a p p e n . We a r i t w i t h p r i d e. EN IMPORTANT Please read this manual carefully before using your helmet. 2 Do not use the helmet in direct sunlight, or very warm places for a long period of time. This can damage the product and generate heat that can cause serious injuries. Do not leave the product near open flames. Do not dispose de product in a fire. This can damage the battery, explode or ignite and cause serious injury. Never charge the helmets battery with a flawed charger, it may cause an explosion or ignition. Battery life may vary depending on conditions, environmental factors, usage, etc. Please note some countries require the use of regular cycling lights. If this is the case, AURA may not replace them. Before using AURA, make sure you comply with local laws and regulations. 1. Safety information 3 EN WARNING AURA was made for non-motorized recreational pedal cycling only. No helmet can prevent against all injuries. Serious injury or death may occur while cycling even with a helmet. Unit 1 Gear, Inc. and/or its subsidiaries make no claim that this helmet will eliminate all possibilities of injury. Lights are a supplement (not a replacement) of regular mounted bike lights. Certain places have laws that require lights, comply with local regulations. Turn signals are supplements, not a replacement of hand signals. Unit 1 Gear, Inc. and/or its subsidiaries are not responsible for any failure of communication resulting from turn signals or brake lights. Lights are no guarantee against preventing an accident or collision. When activating the turn signal, at glance the remote to ensure that you activated the correct turn signal. Activating the wrong turn signal can increase the risk of an accident. If using the turn signals in manual mode, always remember to turn off the signal once used. This helmet was not designed for motor vehicle use, neither for sporting. Every time you use this helmet check if nothing is torn, worn, missing, or out of adjustment. This helmet should not be used by children. Yo u r h e l m e t h a s a b u i l t- i n b a t te r y. B e c a r e f u l to fo l l ow a l l t h e s a fe t y g u i d e l i n e s . 2. Package content 4 EN 1. AURA Helmet2. USB Type-C / Type-A3. Navigation Remote (optional) 3. Overview 5 EN 1.1 1.3 1.4 1.5 1.6 1.7 1.1 Front light / 1.2 Magnetic brim / 1.3 Magnetic buckle / 1.4 Power button / 1.5 Rear light / 1.6 Charging port / 1.7 Fitting system 1.2 4. Fitting instructions A correct fitted helmet should sit comfortably on your head without pressing or chafing and should not move forward to obscure your vision or rearward to expose your forehead. Please make sure the helmet is positioned the right way. Be sure to position the buckle under the chin and back against the throat. The straps should fit comfortably around your ears. Test these adjustments before every ride. 6 EN How to wear your helmet AURA has a great fit. Follow these instructions carefully to apply your helmet correctly. Consult us if you are not sure which features your helmet has. 7 EN Adjust your buckles To l o c k t h e M a g n e t i c b u c k l e b r i n g t h e t w o p a r t s to g e t h e r u n t i l t h e y s n a p . To u n l o c k t h e m , s l i d e t h e m sideways as shown below. To keep the chinstrap from loosening or flapping, it must be tucked through the keeper. Tighten or loosen the Fitting system dial to fit the circumference of your head as required. Fitting system 8 EN 5. Function guide UNIT 1 App Download the UNIT 1 App to customize your helmet's light features and other settings to your liking. Download Android: Google Play Store > Unit 1 iOS: App Store > Unit 1 or scan the QR code below. Power on / off Press & hold the power button for 1 sec. 9 EN Actions with power button: Helmet functions overview - Press & hold the power button for 1 sec: Power On / Off - 4 taps: Helmet reset - 8 taps: Full factory reset (forgets app and remote) 10 EN Plug the USB-C cable into the charging port. Once plugged in the Rear light will display the status of your battery using 6 levels. All 6 levels in a solid green color mean the battery is full. For safety purposes, AURA functions are not available while charging. DO NOT use the helmet while charging with a power bank. Charging Pairing AURA with the U1 App 1. Make sure your phone’s bluetooth connection is active. 2. Power up your helmet 3. Look for your helmet using the U1 App 4. Pair directly from the U1 App 11 EN Troubleshooting If you are having trouble with your helmet, follow these steps Charge the helmet using the USB-C cable. Not powering on Make sure your helmet is fully charged and your bluetooth connection is active Not pairing Reset the helmet by pressing the power button for 5 times. Helmet not responding Make sure the USB-C power source is switched on and plugged correctly. Not charging Pairing AURA with a Navigation Remote 1. Power on your helmet (should be off before you begin) 2. Press & hold any button on the Nav Remote (lights will blink left & right) 3. Wait for connection. Helmet will show 3 green flashes when complete, Nav Remote will also flash 3 times. 12 EN 6. More about your helmet No helmet can protect the wearer against all possible impacts. A severe impact, sharp object, improper use, or incorrect adjustment could cause conditions beyond the protection of the helmet. To b e e f fe c t i v e , a h e l m e t m u s t f i t a n d b e w o r n c o r r e c t l y. T h e h e l m e t i s d e s…

Text truncated - open the document above for the full version.

Unit 1 Gear, Inc. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – EquipmentType Company name: Unit 1 Gear, Inc. Address: 801 US Highway 1 North Palm Beach Florida 33408, United States Product Name: AURA HYBRID SMART HELMET FCCID: 2A25E-AURA Model(s): AURA 2.911(d)(5)(i) EquipmentType We, [Unit 1 Gear, Inc.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Francisco Abelleira Blanco Date: Jan. 31, 2024 Title: COO Company name: Unit 1 Gear, Inc. Signature: NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Unit 1 Gear, Inc. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Unit 1 Gear, Inc. Address: 801 US Highway 1 North Palm Beach Florida 33408, United States Product Name: AURA HYBRID SMART HELMET FCCID: 2A25E-AURA Model(s): AURA 2.911(d)(5)(ii) Applicant filing We, [Unit 1 Gear, Inc.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to §1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Francisco Abelleira Blanco Date: Jan. 31, 2024 Title: COO Company name: Unit 1 Gear, Inc. Signature: NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Unit1Gear,Inc. 2.911(d)(7)USAAgentv1.3 Section2.911(d)(7)USAAgentforServiceofProcess Companyname:Unit1Gear,Inc. Address:801USHighway1NorthPalmBeachFlorida33408,UnitedStates ProductName:AURAHYBRIDSMARTHELMET FCCID:2A25E-AURA Model(s):AURA 2.911(d)(7)USADesignatedAgentforServiceofProcess We,[Unit1Gear,Inc.](“theapplicant”)designate[Unit1Gear,Inc.] NOTE1 forthe purposeofacceptingserviceofprocessonbehalfoftheapplicant. Applicantconsent:WeAcknowledgeourconsenttoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipment,andatthephysicalU.S. addressandemailaddressofthedesignatedagentandacknowledgeouracceptance ofourobligationtomaintainanagentforserviceofprocessintheUnitedStatesforno lessthanoneyearaftereitherthegranteehaspermanentlyterminatedallmarketing andimportationoftheapplicableequipmentwithintheU.S.,ortheconclusionofany Commission-relatedadministrativeorjudicialproceedinginvolvingtheequipment, whicheverislater. Agentobligation:WeAcknowledgeourobligationtoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipmentatourphysicalU.S. addressandemailaddressfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipment withintheU.S.,ortheconclusionofanyCommission-relatedadministrativeorjudicial proceedinginvolvingtheequipment,whicheverislater. USAAgent Companyname:Unit1Gear,Inc. Address:801USHighway1North PalmBeach,Florida33408United States FCCRegistrationNumber(FRN): 0031347446 ContactName:Francisco AbelleiraBlanco TelephoneNo:+1(720)919-6245 Email:[email protected] Applicant Companyname:Unit1Gear,Inc. Address:801USHighway1NorthPalm BeachFlorida33408,UnitedStates FCCRegistrationNumber(FRN):0031347446 FCCGranteeCode:2A25E ContactName:FranciscoAbelleiraBlanco TelephoneNo:+1(720)919-6245 Email:[email protected] Signature: Title:COO Signature: Title:COO Date:Jan.17,2024Date:Jan.17,2024 Unit1Gear,Inc. 2.911(d)(7)USAAgentv1.3 NOTE1:AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforservice ofprocess. Reference;FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national- security-threats-to-the-communications-supply-chain-through-the

Unit 1 Gear, Inc. Agent Authorization Company: Unit 1 Gear, Inc. Address: 801 US Highway 1 North Palm Beach Florida 33408, United States Product Name: AURA HYBRID SMART HELMET Model Number(s): AURA Product Description: AURA HYBRID SMART HELMET We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jan. 31, 2024 Name: Francisco Abelleira Blanco Title: COO Company: Unit 1 Gear, Inc.

Unit 1 Gear, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 31, 2024 Subject; Request for Confidentiality FCC ID: 2A25E-AURA To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Francisco Abelleira Blanco Title: COO

Annex A External Photos Report Number: HK2310244971-E Page 1 of 3 Report Number: HK2310244971-E Page 2 of 3 Report Number: HK2310244971-E Page 3 of 3

FCC ID LABEL: Ca. 40mm x 10mm Label Location FCC ID: 2A25E-AURA

Annex B Internal Photos Report Number: HK2310244971-E Page 1 of 5 Report Number: HK2310244971-E Page 2 of 5 Report Number: HK2310244971-E Page 3 of 5 Antenna Report Number: HK2310244971-E Page 4 of 5 Report Number: HK2310244971-E Page 5 of 5

FCC RF Exposure EUT Description: AURA HYBRID SMART HELMET Model No.: AURA FCC ID: 2A25E‐AURA 1. Limits According to KDB 447498 D01 General RF Exposure Guidance v06 The 1‐g and 10‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max power of channel, including tune‐up tolerance, mW)/(min. test separation distance, mm)] ·[√ f(GHz)]≤3.0 for 1‐g SAR and ≤ 7.5 for 10‐g extremity SAR, Where: Result=P/D*√F F= the RF channel transmit frequency in GHz P=Maximum turn‐up power in mw D=Min. test separation distance in mm 2. Test Result of RF Exposure Evaluation Frequency (MHz) Output power （ dBm） Tune Up Power （dBm） Max Tune Up power dBm/mW Min test separati on distance mm Result Limit (mW/cm 2 ) SAR Test Exclusion 2440 ‐6.23 ‐7±1 ‐6/0.2515 0.078 3.0 Pass Note: PK Output power= conducted power. Conducted power see the test report HK2310244971‐E, antenna gain= 0.5dBi Per KDB 447498 D01, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine RF Exposure test exclusion. The test exclusion threshold is 0.078 which is<= 3, RF Exposure testing is not required. Note: Exclusion Thresholds Results=[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f (GHz)] f(GHz) is the RF channel transmit frequency in GHz Distance=5mm

2.4GHz Mini Antenna, SMTP/N 2450AT18A100 Detail Specification: Page 1 of 5 *Efficiency based on Johanson's standard evaluation board ±± ±± ±± www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" Part Number 7/9/2018 Avg. Rad Efficiency* Let us help you with the antenna design, optimization, and tuning! 2450AT18A100 2400 - 2500 76% General Specifications Frequency (MHz) 18 months max. -40 to +125°C -40 to +125°C 3000 Return Loss (dB) Impedance Input Power Storage Period Storage Temperature Operating Temperature Reel Quantity 50 Ω 2 Watts max. (CW) Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. e.g. 2450AT18A100(E or S)100% Tin Packing Style Evaluation Board 2450AT18A100-EBSMA (see page 2&3 for details) Bulk (loose) T & R Suffix = E or S Suffix = E P/N Suffix Mechanical Dimensions In L 0.1260.0083.200.2 W 0.0630.0081.600.2 T 0.0511.30+.004/-.008 +0.1/-0.2 a 0.0200.0120.500.3 Terminal Configuration Function FEED NC No. 1 2 mm e.g. 2450AT18A100E e.g. 2450AT18A100SSuffix = S Part Number Explanation Peak Gain (dBi typ.) Average Gain (dBi typ.) 0.5 -0.5 9.5 min. ① ② L W a T Want the layout file? Request it at: www.johansontechnology.com/ask-a-question 2.4GHz Mini Antenna, SMTP/N 2450AT18A100 Detail Specification: Page 2 of 5 JTI P/N for Matching Circuit: Cap (1.0pF): 500R07S1R0BV4T Inductor (2.7nH): L-07C2N7SV6T Inductor (3.9nH): L-07C3N9SV6T www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 7/9/2018 Mounting Considerations 1: Evaluation Board Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. GND NO GND Units in mm ) ) 13.5mm 6.5mm 39.5mm 6.5mm 50Ω Feed Line Antenna 4mm ) Matching Component JTI P/Ns: L-14C2N7JV4 L-14C2N2JV4 * 2.6 4.2 1.6 1.9 0.4 2.7nH 1.0pF 3.9nH To order a pre-tuned 50Ω EVB with a female SMA connector click here: www.johansontechnology.com/request-a-sample Reference p/n: 2450AT18A100-EBSMA 2.4GHz Mini Antenna, SMTP/N 2450AT18A100 Detail Specification: Page 3 of 5 Return Loss with matching circuit @ +25CVSWR with matching circuit @ +25C and +125C www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 7/9/2018 Mounting Considerations 1: Typical Electrical Performance (T=25°C) Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. 2.4GHz Mini Antenna, SMT P/N 2450AT18A100 Detail Specification: Page 4 of 5 www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 7/9/2018 Mounting Considerations 1: Antenna Performance Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Z X (0°) Y X (0°) Typical 2D radiation patterns @ 2.44GHz YZ-plane XZ-plane XY-plane Z (0°) Y XY cut @2.45GHz Vertical Horizontal XZ cut @2.45GHz Vertical Horizontal YZ cut @2.45GHz Vertical Horizontal 2.4GHz Mini Antenna, SMTP/N 2450AT18A100 Detail Specification: Page 5 of 5 www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Soldering Information RoHS Compliance Packaging information For layout review contact our Applications Team at: "High Frequency Ceramic Solutions" Antenna tuning, optimization, and validation services: For more antennas and to download measured S-parameters, go to: MSL Info 7/9/2018 www.johansontechnology.com/ipc-antenna-services www.johansontechnology.com/antennas www.johansontechnology.com/ipcsoldering-profile www.johansontechnology.com/msl-rating www.johansontechnology.com/tape-reel-packaging www.johansontechnology.com/ask-a -question www.johansontechnology.com/rohs-compliance Need help designing the antenna in? Use our antenna design services! www.johansontechnology.com/ipc-antenna-services We provide 2 free layout reviews and if you need us to tune and characterize the antenna on your product (inside anechoic chamber) we can do that too. Small lab fee may apply for the latter.

Page 1 of 44 Report No.: HK2310244971-E FCC Test Report Test Report On Behalf of Unit 1 Gear, Inc. For AURA HYBRID SMART HELMET Model No.: AURA FCC ID: 2A25E-AURA Prepared For: Unit 1 Gear, Inc. 801 US Highway 1 North Palm Beach Florida 33408, United States Prepared By: Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Oct. 24, 2023 ~ Jan. 04, 2024 Date of Report: Jan. 04, 2024 Report Number: HK2310244971-E Page 2 of 44 Report No.: HK2310244971-E Test Result Certification Applicant’s Name ................... : Unit 1 Gear, Inc. Address .................................... : 801 US Highway 1 North Palm Beach Florida 33408, United States Manufacturer's Name ............. : FULL TECHNOLOGY LIMITED Address .................................... : NO. 3 BANHU NORTH RD., HUANGJIANG TOWN, DONGGUAN CITY, CHINA Product Description Trade Mark ............................... : UNIT1 Product Name .......................... : AURA HYBRID SMART HELMET Model and/or Type Reference .. : AURA Standards ................................ : 47 CFR FCC Part 15 Subpart C 15.247 KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10: 2013 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test .............................................. : Date (s) of Performance of Tests ............... : Oct. 24, 2023 ~ Jan. 04, 2024 Date of Issue ............................................. : Jan. 04, 2024 Test Result ................................................. : Pass Testing Engineer Len Liao Technical Manager Sliver Wan Authorized Signatory Jason Zhou Page 3 of 44 Report No.: HK2310244971-E Contents Page 1 Test Summary ................................................................................................................................................ 5 1.1 Test Description ......................................................................................................................................... 5 1.2 Measurement Uncertainty ......................................................................................................................... 6 1.3 Information of the Test Laboratory ............................................................................................................ 6 2 General Information ....................................................................................................................................... 7 2.1 General Description of EUT ...................................................................................................................... 7 2.2 Description of Test Conditions .................................................................................................................. 9 2.3 Description of Test Setup ........................................................................................................................ 10 2.4 Description of Support Units .................................................................................................................... 11 3 Equipments List for All Test Items ............................................................................................................. 12 4 Test Result .................................................................................................................................................... 14 4.1 Antenna Requirement.............................................................................................................................. 14 4.2 Conduction Emissions Measurement ...................................................................................................... 15 4.3 Radiated Emissions Measurement .......................................................................................................... 19 4.4 Maximum Output Power Measurement ................................................................................................... 28 4.5 Power Spectral Density ........................................................................................................................... 29 4.6 6dB Bandwidth ........................................................................................................................................ 32 4.7 Occupied Bandwidth ................................................................................................................................ 35 4.8 Band Edge ............................................................................................................................................... 36 4.9 Conducted Spurious Emissions .............................................................................................................. 38 5 Test Setup Photos ....................................................................................................................................... 42 6 Photos of the EUT ........................................................................................................................................ 44 Page 4 of 44 Report No.: HK2310244971-E ** Modified History ** Revision Description Issued Data Remark Revision 1.0 Initial Test Report Release Jan. 04, 2024 Jason Zhou Page 5 of 44 Report No.: HK2310244971-E 1 Test Summary 1.1 Test Description Test Item Test Requirement Result Antenna Requirement §15.203/§15.247(b)(4) PASS Conducted Emission FCC Part 15.207 PASS Radiated Emissions FCC Part 15.205/15.209 PASS Maximum Peak Output Power FCC Part 15.247(b) PASS Power Spectral Density FCC Part 1…

Text truncated - open the document above for the full version.

Report No.: HK2310244971-E Radiated Emission Report No.: HK2310244971-E Conducted Emission