2A29A-FBRFD23Transceiver

FireBoard Labs, LLC - Regulatory Compliance Information FCC statement for FBRFD23 FCC ID: 2A29A-FBRFD23 IC: 27842-FBRFD23 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or experienced radio/TV technician for help. Important: Modifications to the Product not authorized by FireBoard Labs may result in unintended consequences and may void the user’s authority to operate the equipment and overall wireless compliance of the Product. The use of the product and its conformance to testing is also under the use of approved FireBoard accessories and components. Use of other non approved components may introduce unintended interference and/or deviation from overall wireless compliance. Radio Frequency Radiation Exposure: This device is a portable transceiver that utilizes an internal antenna to send and receive low levels of Radio Frequency (RF) energy for data communications. The device emits RF energy below the published limits for portable use when operating in its maximum output mode. To comply with RF exposure compliance requirements, the device should be used as described in the manual. The device should not be used in other configurations. CANADA Statement for FBRFD23: This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. French / Français: Cet appareil contient des émetteurs / récepteurs exemptés de licence qui sont conformes aux RSS exempts de licence d’Innovation, Sciences et Développement économique Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas provoquer d’interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences pouvant entraîner un fonctionnement indésirable de l’appareil. Responsible party (for FCC matters only): FireBoard Labs, LLC 501 Charlotte Kansas City, MO 64106 FireBoard Labs, LLC Limited Warranty (English) THIS LIMITED WARRANTY CONTAINS INFORMATION ABOUT YOUR RIGHTS AND OBLIGATIONS, AS WELL AS LIMITATIONS AND EXCLUSIONS. 1. WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE FireBoard Labs, Inc. (“FireBoard Labs”), 501 Charlotte, Kansas City, Missouri USA, warrants to the owner of the enclosed product(s) contained in this box (“Product”) will be free from defects in materials and workmanship for a period with respect to the following table: Warranty Item:Warranty Period: FireBoard Antenna (Model FBRFD)12 months The warranty period is valid from the date of delivery following the original retail purchase for a period according to the above table (the “Warranty Period”). If the Product fails to conform to this Limited Warranty during the Warranty Period, FireBoard Labs will either repair or replace any defective Product or component Repair or replacement may be made with a new or refurbished product or components, at FireBoard Labs’ determination. If the Product or a component incorporated within it is no longer available, FireBoard Labs may replace the Product with a similar product of similar function. This is your exclusive remedy for breach of this Limited Warranty. Any Product that has either been repaired or replaced under this Limited Warranty will be covered by the terms of this Limited Warranty for the longer of (a) sixty (60) days from the date of delivery of the repaired Product or replacement Product, or (b) the remaining Warranty Period. 2. RETURN POLICY If you are the original purchaser of the Product, you may return it in its original condition within thirty (30) days of the original purchase and receive a full refund if you are not satisfied with its performance. 3. WARRANTY CONDITIONS AND CLAIMS Before making a claim under this Limited Warranty, the owner of the Product must (a) notify FireBoard Labs of the intention to claim by visiting support.fireboard. io or contacting Customer Service at info@fireboard. com during the Warranty Period with a description of the alleged failure. FireBoard Labs will have no warranty obligations with respect to a returned Product if it determines, in its reasonable discretion after examination of the returned Product, that the Product is an Unwarranted Product (defined below). FireBoard Labs will bear all costs of return shipping to owner and will reimburse any shipping costs incurred by the owner, except with respect to any Unwarranted Product, for which owner will bear all shipping costs. 4. WHAT THIS LIMITED WARRANTY DOES NOT COVER This Limited Warranty does not cover the following (collectively “Unwarr…

Text truncated - open the document above for the full version.

FireBoard Labs Kansas City, MO [email protected] 816-945-2232 www.fireboard.com FireBoard is a trademark of FireBoard Labs, LLC and is registered in the U.S. Apple, the Apple logo, iPad, iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc. FireBoard ® TM and © 2023 FireBoard Labs, LLC. All rights reserved. S1G Getting Started with FireBoard Antenna The FireBoard Antenna attaches to the auxillary port of FireBoard to enable FireBoard S1G TM technology. When active, the icon will appear. Remember to connect the FireBoard to WiFi so the most recent firmware can be automatically updated. When a S1G device transmits data to the Antenna, the data will be viewable from the FireBoard screen and via the FireBoard Mobile App. Visit docs.fireboard.io for our online Knowledge Base! Specifications Outer Dimensions 2.9” L x 1” W x 1.1” H (74mm x 25mm x 28mm) Frequency Range 902 - 928 Mhz Connector 8 pin Mini-DIN Compatibility FireBoard 2 Series Power Source Powered from FireBoard via aux port (example screen showing Beacon data)

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: November 15, 2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A29A-FBRFD23 FireBoard Labs, LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Ted Conrad CEO, FireBoard Labs, LLC 501 Charlotte Kansas City, MO 64106 816-945-2232

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: November 15, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A29A-FBRFD23 FireBoard Labs, LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Ted Conrad CEO, FireBoard Labs, LLC 501 Charlotte Kansas City, MO 64106 816-945-2232

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: November 15, 2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: 2A29A-FBRFD23 FireBoard Labs, LLC (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0031415078 Name: FireBoard Labs, LLC Address: 501 Charlotte Contact Person: Ted Conrad Tel.: 816-945-2232 Email: [email protected] Sincerely, Ted Conrad CEO, FireBoard Labs, LLC 501 Charlotte Kansas City, MO 64106 816-945-2232

November 22, 2023 Timco Engineering Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 Applicant: FireBoard Labs LLC 501 Charlotte Kansas City, MO 64106 CORES number: 0031415078 Equipment: FCC ID: 2A29A-FBRFD23 FCC Rules: Parts 2, 15C To Whom It May Concern: The form 731 and application have been electronically submitted and any attachments will be uploaded to your web site for use in obtaining a grant of certification. Confidentiality is requested as outlined below. Permanent FireBoard Labs LLC requests that the material in the Block Diagram, Operational Description, and Schematics be withheld from public disclosure pursuant to Sections 0.457 and 0.459 of the Commission’s Rules following grant of the application. A statement of confidentiality will be attached with the application at the time of submittal. CONFIDENTIAL FILES FBRFD23 Conf BlkDia.pdf FBRFD23 Conf OpDes.pdf FBRFD23 Conf Schem.pdf Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers Rogers Labs, Inc. Enclosures ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214

Page 1 of 2 November 29, 2023 Timco Engineering Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 Applicant: FireBoard Labs LLC 501 Charlotte Kansas City, MO 64106 Re: Confidentiality for submittal information regarding FCC ID: 2A29A-FBRFD23 Product: Transmitter operated under 47CFR Section 15C Dear Sirs: FireBoard Labs LLC requests that the material in the Block Diagram, Operational Description, and Schematics be withheld from public disclosure pursuant to Sections 0.457 and 0.459 of the Commission’s Rules following grant of the application. In support of this request, FireBoard Labs LLC submits the following information. CONFIDENTIAL FILES FBRFD23 Conf BlkDia.pdf FBRFD23 Conf OpDes.pdf FBRFD23 Conf Schem.pdf 1. Identification of the specific information for which confidential treatment is sought: The materials set forth in the Block Diagram, Operational Description, and Schematics which are segregated, from the non-confidential exhibits of the application, are those for which confidentiality is sought. 2. Identification of the Commission proceeding in which the information was submitted or a description of the circumstances giving rise to the submission: The proceeding is that involving the application for equipment authorization (certification) under FCC ID: 2A29A-FBRFD23 3. Explanation of the degree to which the information is commercial or financial, or contains a trade secret or is privileged: This material includes a detailed Block Diagram, Operational Description, and Schematics. As such, this material is treated as highly confidential business information. ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 913 837-3214 Page 2 of 2 4. Explanation of the degree to which the information concerns a service that is subject to competition: The material for which confidentiality is sought is employed in the design and manufacture of this transmitting equipment that is offered on a highly competitive basis. Customers for this equipment have a variety of competing sources. 5. Explanation of how disclosure of the information could result in substantial competitive harm: Disclosure would, in effect, give away the fruits of the labors of FireBoard Labs LLC’s engineering personnel, who have designed the equipment and the manufacturing process. Disclosure would also offer competitors additional unwarranted insight into the state of the product development, thereby allowing competitors an advantage, not available to FireBoard Labs LLC 6. Identification of any measures taken by the submitting party to prevent unauthorized disclosure: The information for which confidential treatment is sought is kept confidential by FireBoard Labs LLC and not made available to third parties except pursuant to non-disclosure agreements. 7. Identification of whether the information is available to the public and the extent of any previous disclosure of the information to third parties: To the knowledge of those preparing this application, the information has not been disclosed publicly heretofore. While the general theory of operation of this equipment has been the subject of numerous disclosures in industry the protection sought is narrowly drawn as provided in regulations. 8. Justification of the period during which the submitting party asserts that the material should not be available for public disclosure: This material should not be disclosed for at least 25 years. While improvements in design are made relatively frequently, disclosure of the design information would lead to insights into both design and manufacturing techniques that could have an adverse competitive effect for many years to come. As such, it is important that the design not be made available to unauthorized persons who might attempt to use knowledge of the design to compromise the applications for which the equipment will be employed. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Scot Rogers

Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: CFR47 15C, RSS-210, RSS-247 Date: November 15, 2023 Revision 1 File: FBRFD23 ExtPho Page 1 of 6 External photographs of equipment under test Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: CFR47 15C, RSS-210, RSS-247 Date: November 15, 2023 Revision 1 File: FBRFD23 ExtPho Page 2 of 6 Sides Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: CFR47 15C, RSS-210, RSS-247 Date: November 15, 2023 Revision 1 File: FBRFD23 ExtPho Page 3 of 6 Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: CFR47 15C, RSS-210, RSS-247 Date: November 15, 2023 Revision 1 File: FBRFD23 ExtPho Page 4 of 6 Support Device Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: CFR47 15C, RSS-210, RSS-247 Date: November 15, 2023 Revision 1 File: FBRFD23 ExtPho Page 5 of 6 Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: CFR47 15C, RSS-210, RSS-247 Date: November 15, 2023 Revision 1 File: FBRFD23 ExtPho Page 6 of 6

Rev 1/26/2023 Date: November 30, 2023 Ref: Labeling Example for FBRFD FCC ID or Grantee Code: 2A29A-FBRFD23 Rev 1/26/2023 Firebord 2 Support Device Ted Conrad CEO, FireBoard Labs, LLC 501 Charlotte Kansas City, MO 64106 816-945-2232

Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: CFR47 15C, RSS-247 Date: November 15, 2023 Revision 1 File: FBRFD23 IntPho Page 1 of 3 Internal photographs of equipment under test Inside enclosure Top Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: CFR47 15C, RSS-247 Date: November 15, 2023 Revision 1 File: FBRFD23 IntPho Page 2 of 3 Back Side PCB Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: CFR47 15C, RSS-247 Date: November 15, 2023 Revision 1 File: FBRFD23 IntPho Page 3 of 3 Chip Antenna

FBRFD23 RF Exemption WiFi Module 900 MHz & Summary

NVLAP Lab Code 200087-0 Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: 47CFR 15C, RSS-Gen RSS-247 Date: November 15, 2023 Revision 1 File: Fireboard FBRFD23 230819 Page 1 of 43 Application For Grant of Certification 47CFR Paragraph 15.247 FHSS and Industry Canada RSS-GEN Issue 5 and RSS-247 Issue 3 Hardware Version Identification Number (HVIN) HVIN: FBRFD23 902-928 MHz (DSSS) Frequency Hopping Spread Spectrum License Exempt Intentional Radiator FCC ID: 2A29A-FBRFD23 IC: 27842-FBRFD23 FireBoard Labs LLC 501 Charlotte Kansas City, MO 64106 FCC Designation: US5305 ISED Registration: 3041A Test Report Number: 230819 Test Date: August 19 to September 28, 2023 Authorized Signatory: Scot D. Rogers This report shall not be reproduced except in full, without the written approval of the laboratory. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. ROGERS LABS, INC. 4405 West 259 th Terrace Louisburg, KS 66053 Phone / Fax (913) 837-3214 NVLAP Lab Code 200087-0 Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: 47CFR 15C, RSS-Gen RSS-247 Date: November 15, 2023 Revision 1 File: Fireboard FBRFD23 230819 Page 2 of 43 Table of Cont ents Table of Cont ents TABLE OF CONTENTS .................................................................................................. 2 REVISIONS ..................................................................................................................... 4 EXECUTIVE SUMMARY ................................................................................................ 5 OPINION / INTERPRETATION OF RESULTS ............................................................... 6 EQUIPMENT TESTED .................................................................................................... 9 Equipment Function ............................................................................................................................................ 9 Equipment Configuration.................................................................................................................................. 10 APPLICATION FOR CERTIFICATION ......................................................................... 11 APPLICABLE STANDARDS ........................................................................................ 12 EQUIPMENT TESTING PROCEDURES ...................................................................... 12 AC Line Conducted Emission Test Procedure ................................................................................................ 12 Radiated Emission Test Procedure ................................................................................................................... 12 Antenna Port Conducted Emission Test Procedure ........................................................................................ 13 Diagram 1 Test arrangement for Conducted emissions ..................................................................................... 14 Diagram 2 Test arrangement for radiated emissions of tabletop equipment ...................................................... 15 Diagram 3 Test arrangement for radiated emissions tested on Open Area Test Site (OATS) ........................... 16 Diagram 4 Test arrangement for Antenna Port Conducted emissions ............................................................... 17 TEST SITE LOCATIONS .............................................................................................. 17 UNITS OF MEASUREMENTS ...................................................................................... 18 ENVIRONMENTAL CONDITIONS................................................................................ 18 STATEMENT OF MODIFICATIONS AND DEVIATIONS ............................................. 18 INTENTIONAL RADIATORS ........................................................................................ 19 Antenna Requirements ...................................................................................................................................... 19 Restricted Bands of Operation .......................................................................................................................... 19 NVLAP Lab Code 200087-0 Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: 47CFR 15C, RSS-Gen RSS-247 Date: November 15, 2023 Revision 1 File: Fireboard FBRFD23 230819 Page 3 of 43 Table 1 Radiated Emissions in Restricted Frequency Bands ............................................................................. 20 Summary of Results for Radiated Emissions in Restricted Bands ................................................................ 20 AC Line Conducted Emissions Procedure ....................................................................................................... 21 Figure 1 AC Line Conducted emissions (configuration #2) line 1 .................................................................... 22 Figure 2 AC Line Conducted emissions (configuration #2) line 2 .................................................................... 23 Table 2 AC Line Conducted Emissions Data L1 ............................................................................................... 24 Table 3 AC Line Conducted Emissions Data L2 ............................................................................................... 24 Summary of Results for AC Line Conducted Emissions Results .........................…

Text truncated - open the document above for the full version.

AEC-Q200 Qualification Available 915 MHz ISM Antenna for small form factor applicationsP/N 0915AT43A0026 Detail Specification: Page 1 of 7 ±± ±± ±± https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2021 Johanson Technology, Inc. All Rights Reserved e.g. 0915AT43A0026(E or S) Bulk (loose pcs.) T & R 100% Tin https://www.johansontechnology.com/ask-a-question Part Number Explanation Packing Style P/N Suffix Suffix = E Suffix = None e.g. 0915AT43A0026S e.g. 0915AT43A0026E High Frequency Ceramic Solutions Part Number 2/11/2021 Let us help you with the antenna design, optimization, and tuning! 0915AT43A0026 General Specifications Frequency (MHz) 902 - 928 Reel Quantity (pcs/reel) 1,000 Operating Temperature -40 to +85°C Impedance ( Ω) Input Power (W) Recommended Storage Conditions and Period for unused T&R Product +5 to +35°C Humidity 45 - 75% RH 50 2 max. (CW) 18 months max. Return Loss (dB) 8.5 min. 0.0790.0082.000.20 W L 0.2760.0087.000.20 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. T 0.0310.80 +0.10 / -0.20+0.004 / -0.008 a 0.0200.0120.500.30 Terminal Configuration Function Feeding Point NC* No. 1 2 Peak Gain (dBi) 1.0 typ. ((XZ-total) Average Gain (dBi) -4.0 typ. (XZ-total) mm Evaluation Board 0915AT43A0026-EB1SMA Mechanical Dimensions In Suffix = S Top View Side View a T 1 2 L *This terminal must be soldered for anchoring and functionality purposes. 915 MHz ISM Antenna for small form factor applicationsP/N 0915AT43A0026 Detail Specification: Page 2 of 7 https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2021 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 2/11/2021 Mounting Considerations I Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. JTI P/N for Matching Circuit:** Inductor (4.7nH):L-07C4N7SV6T Inductor (10nH): L-07C10NJV6T Cap (0.5pF): 500R07S0R5BV4T GND Plane GND Plane 2.0 5.5 8.0 1.0 5.0 7.0 2.5 0.5 0.5 pF 10 nH 4.7 nH * Mount these devices with maroon mark facing up. *Line width should be designed to provide 50 Ω impedance matching characteristics. Matching circuit**: See Note 2 below! All units in: mm 1.0 1.0 Johanson Test Board (orderable) p/n: 0915AT43A0026-EB1SMA (can be shortened as needed, won't influence performance) 50Ω Feed Line (make sure proper calculation are applied to achieve this. Yellow area- complete GND and layer clearance free of metal below and above. 40 9.5 GND Plane 20 **Note 2:It is recommended that the designer leave available slots for a "pi" (or shunt-series-shunt) network. The antenna matching network values above are used when antenna is mounted on Johanson's evaluation board. The matching values on client’s PCB will be different, depending on the layout, thickness, material, etc. Go to: https://www.johansontechnology.com/tuning and see how to obtain the new values. If you need further help, such as needing the layout file of the above, contact our RF Applications Eng. Team at: https://www.johansontechnology.com/ask-a-question 19 GND Vias 915 MHz ISM Antenna for small form factor applicationsP/N 0915AT43A0026 Detail Specification: Page 3 of 7 https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2021 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 2/11/2021 Typical Radiation Performance @ 25° C using 0915AT43A0026-EB1SMA Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Typical Radiation Patterns ) ) XY-V/XY-H 180° 270° 0° 90° X Z Y XY-cut scanning direction XY cut @915MHz Vertical Horizontal XZ-V/XZ-H YZ-V/YZ-H 180° 270° 0° 90° X Z Y XZ-cut scanning direction 180° 270° 0° 90° X Z Y YZ-cut scanning direction YZ cut @915MHz Vertical Horizontal XZ cut @915MHz Vertical Horizontal 915 MHz ISM Antenna for small form factor applicationsP/N 0915AT43A0026 Detail Specification: Page 4 of 7 https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2021 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 2/11/2021 Mounting Considerations II JTI P/N for Matching Circuit:** Inductor (2.2nH):L-07C2N2SV6T Cap (5.6pF):500R07S5R6BV4T Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Mount these devices with maroon mark facing up. *Line width should be designed to provide 50 Ω impedance matching characteristics. * 2.0 5.5 8.0 1.0 6.0 7.5 4.0 0.5 5.6 pF 2.2 nH 1.0 5.5 40 9.5 20 19 GND Plane GND Plane 50Ω Feed Line (make sure proper calculation are applied to achieve this. Yellow area- complete GND and layer clearance free of metal below and above. GND Plane (can be shortened as needed, won't influence performance) All units in: mm 0.5 Matching circuits Matching circuit**: See Note 2 in Page 2! GND Vias 915 MHz ISM Antenna for small form factor applicationsP/N 0915AT43A0026 Detail Specification: Page 5 of 7 https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2021 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 2/11/2021 Mounting Considerations I: Electrical Performance @25°C Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Mounting Considerations II: Electrical Performance @25°C 0.60.70.80.91.01.11.20.51.3 -40 -35 -30 -25 -20 -15 -10 -5 -45 0 freq, GHz dB(S(1,1)) m1 m2 m3 m1 freq= dB(S(1,1))=…

Text truncated - open the document above for the full version.

Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: CFR47 15C, RSS-210, RSS-247 Date: November 15, 2023 Revision 1 File: FBRFD23 TSup Page 1 of 4 Test setup photographs Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 West 259 th Terrace HVIN: FBRFD23 IC: 27842-FBRFD23 Louisburg, KS 66053 Test: 230819 SN’s: ENG2 / ENG2AP Phone/Fax: (913) 837-3214 Test to: CFR47 15C, RSS-210, RSS-247 Date: November 15, 2023 Revision 1 File: FBRFD23 TSup Page 2 of 4 Rogers Labs, Inc. FireBoard Labs LLC FCC ID: 2A29A-FBRFD23 4405 W…

Text truncated - open the document above for the full version.