2A29A-FBXPDPellet Grill Controller Radio Module

FireBoard Labs, LLC 501 Charlotte Kansas City, MO 64106 US Agent Designation for Service of Process (Applicant is Both Grantee and US Agent) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: October 22, 2025 ATTENTION: FCC Certification – Section 2.911(d)(7) This letter is to confirm that the Applicant will also serve as the US Agent for Service of Process as required by 47 CRF 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission- related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated US Agent information changes. Applicant Company Name: FireBoard Labs, LLC FRN: 0031415078 Grantee Code: 2A29A Contact Name: Ted Conrad Address: 501 Charlotte St., Kansas City, MO 64106 Tel.: 816-945-2232 Email: [email protected] Applicant Signature: US Agent Signature Ted Conrad, CEO

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 11-12-2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A29A-FBXPD FireBoard Labs, LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Ted Conrad CEO FireBoard Labs, LLC 501 Charlotte St. Kansas City, MO 64106

Rev 1/26/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 11-12-2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A29A-FBXPD FireBoard Labs, LLC (“The Applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The Applicant certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Ted Conrad CEO FireBoard Labs, LLC 501 Charlotte St. Kansas City, MO 64106

Page 1 of 1 Request for Confidentiality Date: October 22, 2025 Subject: Confidentiality Request for: FCC ID: 2A29A-FBXPD IC: 27842-FBWP24 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent ☐ Not Provided Block Diagrams ☒ Short Term ☐ Not Provided External Photos ☒ Short Term ☐ Permanent ☐ Not Provided Internal Photos ☐ Short Term ☒ Permanent ☐ Not Provided Operation Description/Theory of Operation ☐ Short Term ☐ Permanent ☒ Not Provided Parts List & Placement/BOM ☐ Short Term ☐ Permanent ☒ Not Provided Tune-Up Procedure ☐ Short Term ☒ Permanent ☐ Not Provided Schematics ☒ Short Term ☐ Not Provided Test Setup Photos ☒ Short Term ☐ Permanent ☐ Not Provided User’s Manual The above-mentioned company has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality (if applicable): The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify Timco in the event information regarding the product or the product is made available to the public before the requested period has expired. Timco will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04- 1705. Sincerely, By: __________________________ Blake Winter, EMC Test Engineer, NCEE Labs

FireBoard Labs, LLC 501 Charlotte Kansas City, MO 64106 October 22, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: Pursuant to 47 CFR 2.911, FireBoard Labs, LLC has authorized Fox Lane, Karthik Vepuri, Blake Winter of the Nebraska Center for Excellence in Electronics (NCEE Labs), at 4740 Discovery Drive, Lincoln, NE 68521 to act on FireBoard Labs, LLC’s behalf for the sole and express purpose of processing applications to the Federal Communication Commission (FCC) for equipment FCC authorization. This authorization is limited to FCC ID 2A29A-FBXPD. Consistent with the foregoing, Fox Lane, Karthik Vepuri, or Blake Winter is authorized to the following: 1) Sign Form 731 2) Sign letters of application 3) Request confidentiality 4) Exchange data and information with the FCC, and authorized TCBs on behalf of FireBoard Labs, LLC. This authorization is not assignable to others beyond Fox Lane, Karthik Vepuri, or Blake Winter. No party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C 862. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. This authorization expires 10/22/2026. Sincerely, Ted Conrad CEO FireBoard Labs, LLC 501 Charlotte St. Kansas City, MO 64106

Label Text: FireBoard Pellet Drive FBXPD Power Input: 120-240V ~5A 50-60Hz Designed and Assembled in Kansas City FCC ID: 2A29A-FBXPD IC: 27842-FBXPD Also Contains Module: FCC ID: 2AC7Z-ESPS3WROOM1 IC: 2AC7Z-ESPS3-WROOM1

The Nebraska Center for Excellence in Electronics (NCEE) authorizes the above-named company to reproduce this report provided it is reproduced in its entirety for use by the company’s employees only. Any use that a third party makes of this report, or any reliance on or decisions made based on it, are the responsibility of such third parties. NCEE accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. RF Exposure Evaluation Report Client: Fireboard Labs LLC Address: 501 Charlotte St Kansas City, MO 64106 EUT: FBXPD Test Report No.: R20241227-81-M1A Approved By: __________________ Blake Winter, EMC Test Engineer iNARTE EMC-50662-E Date: November 10, 2025 Total Pages: 9 NCEE Labs Report Number: R240111-70-M1A Rev: A Test Report Prepared for Fireboard Labs Page 2 of 9 Revision Page Rev. No. Date Description 0 22 October 2025 Issued by BWinter Reviewed by FLane Prepared by BWinter A 10 November 2025 Revision A – BWinter 1. Change statement about BLE antenna gain. 2. Change statement about 900MHz antenna gain. NCEE Labs Report Number: R240111-70-M1A Rev: A Test Report Prepared for Fireboard Labs The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 3 of 9 1 Regulatory Requirements: FCC Part 1.1310, 2.1091, 2.1093 RSS-102, Issue 6 KDB 447498 D01 Summary: The purpose of this report is to evaluate the EUT’s transmitter for exemption from routine SAR testing. EUT: Model: FBXPD FCC ID: 2A29A-FBXPD IC: 27842-FBXPD HVIN: FBXPD BLE Module: Model: ESP32-S3-WROOM-1 FCC ID: 2AC7Z-ESPS3WROOM1 MPE Lab Nebraska Center for Excellence in Electronics MPE Labs FCC Cab Designation: US1060 MPE Labs ISED Cab Designation: US0177 NCEE Labs Report Number: R240111-70-M1A Rev: A Test Report Prepared for Fireboard Labs The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 4 of 9 2 FCC Limits, Part 1.1310 Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f 2 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 NCEE Labs Report Number: R240111-70-M1A Rev: A Test Report Prepared for Fireboard Labs The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 5 of 9 Calculations: BLE Occupational/Controlled General Population/uncontrolled YES FBXPD Frequency Antenna Gain Power Conducted Power (conducted) +10% for tolerance Power Density Limit at specified distance % of limit Result MHz numerical mW mW mW/cm^2 mW/cm^2 2400 - 2483.5 1.71 100 110 0.0374 1.000000 3.74 PASS Distance 20 cm Gain values were taken from the tables in the ESP32-S3-WROOM-1 module datasheet. EIRP (mW) = Conducted power (mW) x antenna gain (numeric). EUT Module Occupational/Controlled General Population/uncontrolled YES FBXPD Frequency Antenna Gain* Power Conducted* Power (conducted) +10% for tolerance Power Density Limit at specified distance % of limit Result MHz numerical mW mW mW/cm^2 mW/cm^2 902 - 928 1.0 14.22 15.65 0.0031 0.60 0.52 PASS *EIRP is used Distance 20 cm Gain value is assumed to be one because EIRP was used. The selected frequency band is based on the worst-case Conducted Power/Antenna Gain product. EIRP (mW) = Conducted power (mW) x antenna gain (numeric). Combined RF exposure: 3.74% + 0.52% = 4.26% 3.74% was the worst-case from the BLE module. 4.26% was the worst-case from the combined RF exposure, which is below the limit. NCEE Labs Report Number: R240111-70-M1A Rev: A Test Report Prepared for Fireboard Labs The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 6 of 9 Result: The EUT was found to be exempt from routine SAR testing and COMPLIANT with RF exposure requirements. Result: Complies Note: The user’s manual will stipulate that a 20cm distance from the user is to be maintained. EIRP values in mW were multiplied by 1.1 to account for a 10% tolerance. NCEE Labs Report Number: R240111-70-M1A Rev: A Test Report Prepared for Fireboard Labs The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 7 of 9 3 ISED RSS 102, Issue 6, Section 6.4 NCEE Labs Report Number: R240111-70-M1A Rev: A Test Report Prepared for Fireboard Labs The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 8 of 9 Calculations: The sum of the maximum time-averaged power of the two sources in this device is less than 1mW per Section 6.4. EUT Maximum time-averaged power calculations Freq. Peak Power EIRP Peak Power EIRP +10% for Tolerance On time per cycle Cycle Time Average Power Average Power Sum* Exemption Limit** Result MHz mW mW Seconds Seconds mW mW mW 2400- 2483.5 1.52 1.67 1 1 1.67 482.15 745 PASS 902-928 436.8 480.48 1 1 480.48 *Average Power = (Peak Power EIRP + 10%) * (On time per cycle) / (Cycle Time) **Applied limit in Section 6.4 is for >50mm separation at 835MHz. In addition, the user’s limb is most likely to be subjected to exposure, so a multiplying factor of 2.5 has been applied to the limit. This device passes the applied limit. Result: The EUT was found to be exempt from routine SAR testing and COMPLIANT with RF exposure exemption requirements. Result: Complies NCEE Labs Report Number: R240111-70-M1A Rev: A Test Report Prepared for Fireboard Labs The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 9 of 9 REPORT END

The Nebraska Center for Excellence in Electronics (NCEE) authorizes the above named company to reproduce this report provided it is reproduced in its entirety for use by the company’s employees only. Any use that a third party makes of this report, or any reliance on or decisions made based on it, are the responsibility of such third parties. NCEE accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. FCC/ISED Test Report Prepared for: Fireboard Labs LLC Address: 501 Charlotte St Kansas City, MO 64106 EUT: FBXPD FCC ID: 2A29A-FBXPD IC ID: 27842-FBXPD HVIN: FBXPD Test Report No: R20241227-81-E1C Approved by: ________________________ Blake Winter EMC Test Engineer iNARTE EMC-50662-E DATE: December 4, 2025 Total Pages: 33 Report Number: R20241227-81-E1C Rev C Prepared for: Fireboard Labs LLC The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 2 of 33 REVISION PAGE Rev. No. Date Description 0 28 May 2025 Issued by BWinter Reviewed by KVepuri Prepared by BWinter A 21 October 2025 Revision A – BWinter 1. Add FCC ID for BLE module that is contained in the LMA PCB. B 10 November 2025 Revision B – BWinter 1. Change from LMA to standard unit certification with ESP module integration. 2. Update C63.10 revision. C 4 December 2025 Revision C – BWinter 1. Make each reference to C63.10 explicitly C63.10-2020. 2. Change output power reference from C63.10-2020 11.9.2.2.2 to 11.9.1.1. Report Number: R20241227-81-E1C Rev C Prepared for: Fireboard Labs LLC The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 3 of 33 CONTENTS Revision Page ............................................................................................................................................................................... 2 1.0 Summary of test results ....................................................................................................................................... 4 2.0 EUT Description .................................................................................................................................................... 5 2.1 Equipment under test ........................................................................................................................................ 5 2.2 Description of test modes ................................................................................................................................ 6 2.3 Description of support units ............................................................................................................................ 6 3.0 Laboratory description ......................................................................................................................................... 7 3.1 Laboratory description ...................................................................................................................................... 7 3.2 Test personnel ..................................................................................................................................................... 7 3.3 Test equipment.................................................................................................................................................... 8 4.0 Detailed results ...................................................................................................................................................... 9 4.1 Duty Cycle .......................................................................................................................................................... 10 4.2 Radiated emissions .......................................................................................................................................... 11 4.3 Peak Output Power .......................................................................................................................................... 18 4.4 Bandwidth ........................................................................................................................................................... 20 4.5 Bandedges ......................................................................................................................................................... 23 4.6 Carrier Frequency SepAration, Number of Hopping Channels, Time of occupancy ...................... 26 4.7 Conducted AC Mains Emissions .................................................................................................................. 29 Appendix A: Sample Calculation ................................................................................................................................... 31 Appendix B – Measurement Uncertainty ...................................................................................................................... 32 REPORT END ..................................................................................................................................................................... 33 Report Number: R20241227-81-E1C Rev C Prepared for: Fireboard Labs LLC The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 4 of 33 1.0 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: (1) US Code of Federal Regulations, Title 47, Part 15 (2) ISED RSS-Gen, Issue 5 (3) ISED RSS-247, Issue 3 ANSI C63.10-2020 was used as a test method, with guidance from KBD 558074 D01 v05 SUMMARY Standard Section Test Type and Limit Result Remark FCC 15.203 Unique Antenna Requirement Pass Internal antenna FCC 15.35 RSS-Gen, 6.10 Duty cycle of pulsed emissions Informative only The manufacturer states the duty cycle is <60%. FCC 15.209 RSS-Gen, 7.1 Receiver Radiated Emissions Pass Meets the requirement of the limit. FC…

Text truncated - open the document above for the full version.

The Nebraska Center for Excellence in Electronics (NCEE) authorizes the above-named company to reproduce this report provided it is reproduced in its entirety for use by the company’s employees only. Any use that a third party makes of this report, or any reliance on or decisions made based on it, are the responsibility of such third parties. NCEE accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. Antenna Gain Report Client: Fireboard Labs LLC Address: 501 Charlotte St Kansas City, MO 64106 EUT: FBXPD FCC ID: 2A29A-FBXPD IC ID: 27842-FBXPD Test Report No.: R20241227-00-A1 Approved By: __________________ Blake Winter, EMC Test Engineer iNARTE EMC-50662-E Date: October 16, 2025 Total Pages: 4 NCEE Labs Report Number: R240111-70-M1 Test Report Prepared for Fireboard Labs LLC Page 2 of 4 Revision Page Rev. No. Date Description 0 16 October 2025 Issued by BWinter Prepared by BWinter NCEE Labs Report Number: R20240530-00-A1R240111-70-M1 Rev: 0 Test Report Prepared for Fireboard Labs LLC The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 3 of 4 1 Regulatory Requirements: FCC Part 15.203, 15.204 KDB 353028 D01 Per the Part 15 Antenna Update, TCB Workshop, October 26, 2022, page 6, iii, this document is a justification statement that all measurements were performed radiated, and therefore, additional gain documentation is not required. EUT: Model: FBWP FCC ID: 2A29A-FBXPD IC ID: 27842-FBXPD Lab Nebraska Center for Excellence in Electronics Lab FCC Cab Designation: US1060 Lab ISED Cab Designation: US0177 NCEE Labs Report Number: R20240530-00-A1R240111-70-M1 Rev: 0 Test Report Prepared for Fireboard Labs LLC The Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521 Page 4 of 4 REPORT END

The module manufacturer’s datasheet states that the antenna gain is 2.33dBi in the 2.4GHz frequency band. Blake Winter EMC Test Engineer NCEE Labs

P/N: 0915AT43A0026001E Legacy P/N: 0915AT43A0026 Doc# 36S00210 Page 1 of 9 / Revision 4.0 Datasheet: 0915AT43A0026001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved 902 – 928 MHz ISM Chip Antenna Johanson Technology, Inc. (JTI) miniature RF ceramic chip antennas are made using Low Temperature Co-fired Ceramic (LTCC) technology which has the ability to embed low and high dielectric constants inside our antenna. This enables our components to have high detuning resilience and stability over extreme temperatures (~2ppm). General Specifications 1 2 Maximum Ratings 1 Typical value represents average measurement at 25°C. Min./Max. values represent measurements over specified operating temperature. 2 General specifications measured on Johanson’s evaluation board P/N 0915AT43A0026001CE1. See pages 3-4. 3 Measured Radiated Efficiency on Johanson’s evaluation board P/N 0915AT43A0026001CE2. See pages 5-6. Passband Frequency (MHz) 902 - 928 Impedance (Ω) 50 Return Loss (dB) 8.5 Min. Peak Gain (dBi) -1.0 Typ. Average Gain (dBi) -4.0 Typ. Average Radiated Efficiency (%) – EVB1 25 Average Radiated Efficiency (%) – EVB2 3 22 Power Capacity (W) 2 Max. (CW) Operating Temperature (°C) -40 to +85 Recommended Storage Conditions post-installation (°C) -40 to +85 Recommended Storage Conditions and Period for Unused T&R Product 45% - 75% RH +5 to +35 °C 18 Months Max. PCB End Recommended mounting locations for this antenna PCB Corner P/N: 0915AT43A0026001E Legacy P/N: 0915AT43A0026 Doc# 36S00210 Page 2 of 9 / Revision 4.0 Datasheet: 0915AT43A0026001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved Mechanical Dimensions Terminal Configuration 4 4 The termination type is Nickel Tin. Go to: https://www.johansontechnology.com/ipcsoldering-profile for Typical Soldering Profile.  This terminal must be soldered for anchoring and mechanical stability. Pin Number Function 1 Feed 2 NC  L 0.276 ± 0.008 7.00 ± 0.20 W 0.079 ± 0.008 2.00 ± 0.20 T 0.031 0.80 a 0.020 ± 0.012 0.50 ± 0.30 I nches Millimeters +0.10/-0.20 +0.004/-0.008 Bottom view Top view Side view ② ① a a L W T P/N: 0915AT43A0026001E Legacy P/N: 0915AT43A0026 Doc# 36S00210 Page 3 of 9 / Revision 4.0 Datasheet: 0915AT43A0026001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved 40 9.5 GND Plane 20 Evaluation Board and Recommended Mounting Configuration 1 (P/N 0915AT43A0026001CE1) *Note: Ground Vias are highly recommended to have better antenna efficiency. JTI P/Ns for Matching Network 5 Capacitor (4.7pF): QSCF500Q4R7B1GV001T Inductor (10nH): LRC0402CJ10NGV001T Capacitor (0.5pF): QSCF500Q0R5B1GV001T If you’d like the CAD PCB layout or have any questions, contact our application engineers at https://www.johansontechnology.com/ask-a-question 5 It is recommended that the designer leave available slots for a "pi" (or shunt-series-shunt) network. The antenna matching network values above are used when the antenna is mounted on Johanson's evaluation board. The optimal matching values will vary depending on the layout, thickness, material, etc. Go to: https://www.johansontechnology.com/tuning for more information. 8 1 7 GND Plane GND Plane 5.5 2.5 0.5 0.5pF 4.7pF 5 2 10nH Antenna Matching Network 50Ω GCPW All units in mm Ground Clearance 50Ω Feed Line Ground Vias* Antenna Matching Network 19 (can be any length) P/N: 0915AT43A0026001E Legacy P/N: 0915AT43A0026 Doc# 36S00210 Page 4 of 9 / Revision 4.0 Datasheet: 0915AT43A0026001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved Evaluation Board Typical Return Loss Measurement (P/N 0915AT43A0026001CE1) Evaluation Board Typical 2D Radiation Patterns @915MHz (P/N 0915AT43A0026001CE1) 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0.5 1.3 -40 -35 -30 -25 -20 -15 -10 -5 -45 0 freq, GHz dB(S(1,1)) Readout m1 Readout m2 Readout m3 m1 freq= dB(S(1,1))=-11.217 902.0MHz m2 freq= dB(S(1,1))=-11.807 928.0MHz m3 freq= dB(S(1,1))=-43.257 915.0MHz +X +Y -X -Y +Z +X -Z -X +Z -Z -Y +Y -X -Y +X (0°) +Y (90°) -X +Z (0°) -Z +X (90°) -Y +Z (0°) +Y (90°) -Z P/N: 0915AT43A0026001E Legacy P/N: 0915AT43A0026 Doc# 36S00210 Page 5 of 9 / Revision 4.0 Datasheet: 0915AT43A0026001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved 40 9.5 GND Plane 20 Evaluation Board and Recommended Mounting Configuration 2 (P/N 0915AT43A0026001CE2) *Note: Ground Vias are highly recommended to have better antenna efficiency. JTI P/Ns for Matching Network 6 Inductor (2.2nH): LRC0402CS2N2GV001T Cap (5.6pF): QSCF500Q5R6B1GV001T If you’d like the CAD PCB layout or have any questions, contact our application engineers at https://www.johansontechnology.com/ask-a-question 6 It is recommended that the designer leave available slots for a "pi" (or shunt-series-shunt) network. The antenna matching network values above are used when the antenna is mounted on Johanson's evaluation board. The optimal matching values will vary depending on the layout, thickness, material, etc. Go to: https://www.johansontechnology.com/tuning for more information. 8 0.5 7.5 GND Plane GND Plane 5.5 4 5.5 0.5 2.2nH 6 2 5.6pF 1 Antenna Matching Network 50Ω GCPW All units in mm Ground Clearance 50Ω Feed Line Ground Vias* Antenna Matching Network 19 (can be any length) 1 P/N: 0915AT43A0026001E Legacy P/N: 0915AT43A0026 Doc# 36S00210 Page 6 of 9 / Revision 4.0 Datasheet: 0915AT43A0026001E johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • +1.805-389-1166 2023 Johanson Technology, Inc. All Rights Reserved Evaluation Board Typical Return Loss Measurement (P/N 0915AT43A0026001CE2) Evaluation Board Typical 2D Radiation Patterns @915MHz (P/N 0915AT43A0026001CE2) 0.6 0.7 0.8 0…

Text truncated - open the document above for the full version.