FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. Emdoor digital technology Co.,Ltd/
  3. 2A2CZ-E134

2A2CZ-E134V2 Two-in-One Tablet

Emdoor digital technology Co.,Ltd
V2 Two-in-One Tablet - FCC ID 2A2CZ-E134 - Emdoor digital technology Co.,Ltd
Click to zoom

Application Details

Equipment Class
DTS - Digital Transmission System
Date of Grant
Nov 21, 2021
Application Purpose
Original Equipment
Date of Application
Nov 21, 2021
Equipment Note
V2 Two-in-One Tablet
Frequency Range
2412.00000000 - 2462.00000000
Company
Emdoor digital technology Co.,Ltd
Country
China

Documents & Files

Select a file to view

Users Manual

↗

Cover Letter(s)

↗
↗
↗
↗

External Photos

↗

ID Label/Location Info

Internal Photos

↗

RF Exposure Info

↗
↗

Test Report

↗
↗
↗
↗

Test Setup Photos

↗
↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

° • • • • • • • • • ² FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 1.This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. 2.The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Specific absorption rate (SAR): This 10.5-inch 2-in-1 tablet meets the government's requirements for exposure to radiowaves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a margin of safety designed to ensure the safety of all people regardless of their age or health. The FCC Statement of Exposure to RF and the SAR limit for the United States (FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for typical operations of use on the body, with the back of the tablet at 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a distance of 0mm between the user's body and the back of the tablet. The use of belt clips, covers and similar accessories must not contain metallic components in their assembly. The use of accessories that do not meet these requirements may not meet FCC RF exposure requirements and should be avoided. Functioning in the body This device was tested for typical operations of use in the body. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user's body and the telephone, including the antenna. Third-party accessories such as belt clips. covers and similar accessories used with this device should not contain metallic components, accessories that do not meet these RF exposure requirements and should be avoided from use on the body. Use only the supplied antenna or an approved antenna.

Cover Letter(s)

Emdoor digital technology Co.,Ltd Family models declaration letter. 2021-11-05 We Company: Emdoor digital technology Co.,Ltd Ad dress: Meigu bld, Wonderful life wisdom Valley technology Park, No.83 Dabao road, Baoan district, Shenzhen,China Product: V2 Two-in-One Tablet Model Name: E134 Family Model: E134-001,E134-002,E134-003,E134-004,E134-005, E134-006,E134-007,E134-008,E134-009,E134-010, E134-011,E134-012,E134-013,E134-014,E134-015, E134-016,E134-017,E134-018,E134-019,E134-020, E134-021,E134-022,E134-023,E134-024,E134-025, E134-026,E134-027,E134-028,E134-029,E134-030 All the model are the same circuit and RF module,except the model names and different sales channels. Thanks Sincerely, Signature [Name] haitao wu [Title] manager Emdoor digital technology Co.,Ltd

Cover Letter(s)

Emdoor digital technology Co.,Ltd Meigu bid, Wonderful life wisdom Valley technology Park, No.83 Dabao road, Baoan district, Shenzhen,China Date: 11/05/2021 FCC ID: 2A2CZ-E134 Model Number: E134 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Emdoor digital technology Co.,Ltd declare that this EUT (FCC ID: 2A2CZ-El34) will conduct FCC compliance tes血g,the sDOC part recognized test lab(Shenzhen NTEK Testing Technology Co., Ltd.). 1/F, Building E, Fenda Science P ark, Sanwei Community, 邓iangStreet Bao'an District, Shenzhen 518126 P.R. China Please contact me if you have any question. Sincerely, (Signed) 加创吵 Name /Title: haitao wu / manager Company: Emdoor digital technology Co.,Ltd Address: Meigu bid, Wonderful life wisdom Valley technology Park, No.83 Dabao road, Baoan district, Shenzhen,China Phone: +86-13049856008 Fax: +86-755-83142771 Email: [email protected]

External Photos

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Photo 9

Internal Photos

Photo 11 Photo 12 Photo 13 Photo 14 Photo 15 Photo 16 Photo 17 Photo 18 Photo 19 Photo 20 Photo 21 Photo 22 BT/WIFI MAIN ANT WIFI AUX ANT

RF Exposure Info

Page 1 of 93 Report No.: S21091502702001 FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093), ANSI/IEEE C95.1-1992 and IEEE Std 1528-2013 Product Name: V2 Two-in-One Tablet Trademark: N/A Model Name: E134 Family Model: E134-001,E134-002,E134-003,E134-004,E134-005, E134-006,E134-007,E134-008,E134-009,E134-010, E134-011,E134-012,E134-013,E134-014,E134-015, E134-016,E134-017,E134-018,E134-019,E134-020, E134-021,E134-022,E134-023,E134-024,E134-025, E134-026,E134-027,E134-028,E134-029,E134-030 Report No.: S21091502702001 FCC ID: 2A2CZ-E134 Prepared for Emdoor digital technology Co.,Ltd Meigu bld, Wonderful life wisdom Valley technology Park, No.83 Dabao road, Baoan district, Shenzhen,China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao'an District, Shenzhen 518126 P.R.China. Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Page 2 of 93 Report No.: S21091502702001 TEST RESULT CERTIFICATION Applicant’s name .................. : Emdoor digital technology Co.,Ltd Address .................................. : Meigu bld, Wonderful life wisdom Valley technology Park, No.83 Dabao road, Baoan district, Shenzhen,China Manufacturer's Name ........... : Jenesis Technology (Shenzhen) Co., LTD Address .................................. : 401-1, Building 2, Workshop, Runheng Industrial Zone, No. 1, Liuxian Third Road, Xingdong Community, Xin 'an Street, Bao 'an District, Shenzhen Product description Product name ......................... : V2 Two-in-One Tablet Trademark ............................ : N/A Model Name ......................... : E134 Family Model .......................... : Refer to page 1 Standards .............................. : FCC 47 CFR Part 2(2.1093) ANSI/IEEE C95.1-1992 IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. I n accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093) and ANSI/IEEE C95.1-1992. The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Date of Test Date (s) of performance of tests ............. : Sep. 24, 2021~ Oct. 11, 2021 Date of Issue ........................................... : Oct. 14, 2021 Test Result............................................... : Pass Prepared By (Test Engineer) : (Jacob Chen) Approved By (Lab Manager) : (Alex Li) Page 3 of 93 Report No.: S21091502702001 ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release Oct. 14, 2021 Jacob Chen Page 4 of 93 Report No.: S21091502702001 TABLE OF CONTENTS 1. General Information ............................................................................................ 6 1.1. RF exposure limits .................................................................................... 6 1.2. Statement of Compliance ........................................................................ 7 1.3. EUT Description ....................................................................................... 7 1.4. Test specification(s) .................................................................................. 9 1.5. Ambient Condition ................................................................................... 9 2. SAR Measurement System ................................................................................. 10 2.1. SATIMO SAR Measurement Set-up Diagram .......................................... 10 2.2. Robot ..................................................................................................... 11 2.3. E- Field Probe .......................................................................................... 12 2.3.1. E- Field Probe Calibration ................................................................. 12 2.4. SAM phantoms ...................................................................................... 13 2.4.1. Technical Data .................................................................................. 14 2.5. Device Holder ........................................................................................ 15 2.6. Test Equipment List ................................................................................ 16 3. SAR Measurement Procedures .......................................................................... 18 3.1. Power Reference ................................................................................... 18 3.2. Area scan & Zoom scan .......................................................................... 18 3.3. Description of interpolation/extrapolation scheme .............................. 20 3.4. Volumetric Scan ..................................................................................... 20 3.5. Power Drift ............................................................................................ 20 4. System Verification Procedure .......................................................................... 21 4.1. Tissue Verification ................................................................................. 21 4.1.1. Tissue Dielectric Parameter Check Results ...................................... 22 4.2. System Verification Procedure .............................................................. 23 4.2.1. System Verification Results .......................................…

Text truncated - open the document above for the full version.

RF Exposure Info

Page 52 of 93 Report No.: S21091502702001 MEASUREMENT 1 Date of measurement: 8/10/2021 A. Experimental conditions. Area Scan dx=10mm dy=10mm, h= 2.00 mm ZoomScan 7x7x12,dx=4mm dy=4mm dz=2mm Phantom Validation plane Device Position Body Band IEEE 802.11n U-NII Channels Middle Signal IEEE802.11n (Crest factor: 1.0) Frequency (MHz) B. SAR Measurement Results 5200.000000 Relative permittivity (real part) 37.508984 Relative permittivity (imaginary part) 15.750310 Conductivity (S/m) 4.550090 Variation (%) -1.000000 SURFACE SAR VOLUME SAR Maximum location: X=-20.00, Y=-2.00 SAR Peak: 3.46 W/kg SAR 10g (W/Kg) 0.303273 SAR 1g (W/Kg) 0.970587 Page 53 of 93 Report No.: S21091502702001 Z (m m) 0.00 2.00 4.00 6.00 8.00 10.0 0 12.0 0 14.0 0 16.0 0 18.0 0 20.0 0 22.0 0 SA R (W/ Kg) 3.13 37 1.78 66 0.87 72 0.35 84 0.22 62 0.12 74 0.08 54 0.05 13 0.04 28 0.03 71 0.03 46 0.03 66 3D screen shot Hot spot position Page 54 of 93 Report No.: S21091502702001 MEASUREMENT 2 Date of measurement: 8/10/2021 A. Experimental conditions. Area Scan dx=10mm dy=10mm, h= 2.00 mm ZoomScan 7x7x12,dx=4mm dy=4mm dz=2mm Phantom Validation plane Device Position Body Band IEEE 802.11n U-NII Channels Middle Signal IEEE802.11n (Crest factor: 1.0) Frequency (MHz) B. SAR Measurement Results 5280.000000 Relative permittivity (real part) 37.399792 Relative permittivity (imaginary part) 15.835469 Conductivity (S/m) 4.645071 Variation (%) 4.210000 SURFACE SAR VOLUME SAR Maximum location: X=1.00, Y=-5.00 SAR Peak: 3.26 W/kg SAR 10g (W/Kg) 0.295806 SAR 1g (W/Kg) 0.906755 Page 55 of 93 Report No.: S21091502702001 Z (m m) 0.00 2.00 4.00 6.00 8.00 10.0 0 12.0 0 14.0 0 16.0 0 18.0 0 20.0 0 22.0 0 SA R (W/ Kg) 2.93 80 1.68 45 0.82 27 0.36 19 0.20 85 0.11 48 0.07 35 0.05 24 0.05 36 0.03 69 0.04 25 0.03 69 3D screen shot Hot spot position Page 56 of 93 Report No.: S21091502702001 MEASUREMENT 3 Date of measurement: 24/9 /2021 A. Experimental conditions. Area Scan dx=10mm dy=10mm, h= 2.00 mm ZoomScan 7x7x12,dx=4mm dy=4mm dz=2mm Phantom Validation plane Device Position Body Band IEEE 802.11n U-NII Channels Middle Signal IEEE802.11n (Crest factor: 1.0) Frequency (MHz) B. SAR Measurement Results 5590.000000 Relative permittivity (real part) 36.327609 Relative permittivity (imaginary part) 16.049437 Conductivity (S/m) 4.984242 Variation (%) 0.690000 SURFACE SAR VOLUME SAR Maximum location: X=-16.00, Y=7.00 SAR Peak: 2.74 W/kg SAR 10g (W/Kg) 0.245805 SAR 1g (W/Kg) 0.739271 Page 57 of 93 Report No.: S21091502702001 Z (m m) 0.00 2.00 4.00 6.00 8.00 10.0 0 12.0 0 14.0 0 16.0 0 18.0 0 20.0 0 22.0 0 SA R (W/ Kg) 2.51 53 1.41 64 0.54 58 0.29 72 0.15 05 0.09 16 0.05 86 0.04 17 0.03 90 0.05 01 0.03 81 0.03 79 3D screen shot Hot spot position Page 58 of 93 Report No.: S21091502702001 MEASUREMENT 4 Date of measurement: 9/10/2021 A. Experimental conditions. Area Scan dx=10mm dy=10mm, h= 2.00 mm ZoomScan 7x7x12,dx=4mm dy=4mm dz=2mm Phantom Validation plane Device Position Body Band IEEE 802.11n U-NII Channels Middle Signal IEEE802.11n (Crest factor: 1.0) Frequency (MHz) B. SAR Measurement Results 5785.000000 Relative permittivity (real part) 36.421131 Relative permittivity (imaginary part) 15.924911 Conductivity (S/m) 5.118089 Variation (%) 0.650000 SURFACE SAR VOLUME SAR Maximum location: X=-27.00, Y=9.00 SAR Peak: 4.97 W/kg SAR 10g (W/Kg) 0.386405 SAR 1g (W/Kg) 1.078315 Page 59 of 93 Report No.: S21091502702001 Z (m m) 0.00 2.00 4.00 6.00 8.00 10.0 0 12.0 0 14.0 0 16.0 0 18.0 0 20.0 0 22.0 0 SA R (W/ Kg) 4.46 23 2.49 65 1.09 32 0.47 75 0.22 06 0.12 11 0.07 52 0.05 51 0.04 16 0.04 46 0.04 47 0.04 61 3D screen shot Hot spot position Page 60 of 93 Report No.: S21091502702001 MEASUREMENT 5 Date of measurement: 11/10/2021 A. Experimental conditions. Area Scan dx=12mm dy=12mm, h= 5.00 mm ZoomScan 7x7x7,dx=5mm dy=5mm dz=5mm Phantom Validation plane Device Position Body Band IEEE 802.11n ISM Channels Middle Signal IEEE802.11n (Crest factor: 1.0) Frequency (MHz) B. SAR Measurement Results 2437.000000 Relative permittivity (real part) 40.785812 Relative permittivity (imaginary part) 12.887564 Conductivity (S/m) 1.744833 Variation (%) 2.250000 SURFACE SAR VOLUME SAR Maximum location: X=-16.00, Y=-47.00 SAR Peak: 1.06 W/kg SAR 10g (W/Kg) 0.239457 SAR 1g (W/Kg) 0.580864 Page 61 of 93 Report No.: S21091502702001 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 1.0638 0.6072 0.2819 0.1385 0.0719 0.0425 0.0271 3D screen shot Hot spot position Page 62 of 93 Report No.: S21091502702001 14. Appendix D. Calibration Certificate Table of contents E Field Probe - SN 08/16 EPGO287 2450 MHz Dipole - SN 03/15 DIP 2G450-352 5000-6000 MHz Dipole - SN 13/14 WGA 33 Page 63 of 93 Report No.: S21091502702001 Page 64 of 93 Report No.: S21091502702001 Page 65 of 93 Report No.: S21091502702001 Page 66 of 93 Report No.: S21091502702001 Page 67 of 93 Report No.: S21091502702001 Page 68 of 93 Report No.: S21091502702001 Page 69 of 93 Report No.: S21091502702001 Page 70 of 93 Report No.: S21091502702001 Page 71 of 93 Report No.: S21091502702001 Page 72 of 93 Report No.: S21091502702001 Page 73 of 93 Report No.: S21091502702001 Page 74 of 93 Report No.: S21091502702001 Page 75 of 93 Report No.: S21091502702001 Page 76 of 93 Report No.: S21091502702001 Page 77 of 93 Report No.: S21091502702001 Page 78 of 93 Report No.: S21091502702001 Page 79 of 93 Report No.: S21091502702001 Page 80 of 93 Report No.: S21091502702001 Page 81 of 93 Report No.: S21091502702001 Page 82 of 93 Report No.: S21091502702001 Page 83 of 93 Report No.: S21091502702001 Page 84 of 93 Report No.: S21091502702001 Page 85 of 93 Report No.: S21091502702001 Page 86 of 93 Report No.: S21091502702001 Page 87 of 93 Report No.: S21091502702001 Page 88 of 93 Report No.: S21091502702001 Page 89 of 93 Report No.: S21091502702001 Page 90 of 93 Report No.: S21091502702001 Page 91 of 93 Report No.: S21091502702001 Page 92 of 93 Report No.: S21091502702001 Page 93 of 93 Report No.: S21091502702001 _____________________________________ END__…

Text truncated - open the document above for the full version.

Test Report

Report No.: S21091502703002 Version.1.3 Page 1 of 62 RADIO TEST REPORT FCC ID: 2A2CZ-E134 Product: V2 Two-in-One Tablet Trade Mark: N/A Model No.: E134 Family Model: N/A Report No.: S21091502703002 Issue Date: Oct 14. 2021 Prepared for Emdoor digital technology Co.,Ltd Meigu bld, Wonderful life wisdom Valley technology Park, No.83 Dabao road, Baoan district, Shenzhen,China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: S21091502703002 Version.1.3 Page 2 of 62 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 4 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 5 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 6 3.1 FACILITIES..................................................................................................................................................... 6 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 6 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 6 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 7 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 9 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.1.1 Applicable Standard ................................................................................................................................... 14 7.1.2 Conformance Limit .................................................................................................................................... 14 7.1.3 Measuring Instruments............................................................................................................................... 14 7.1.4 Test Configuration ..................................................................................................................................... 14 7.1.5 Test Procedure ............................................................................................................................................ 14 7.1.6 Test Results ................................................................................................................................................ 15 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 17 7.2.1 Applicable Standard ................................................................................................................................... 17 7.2.2 Conformance Limit .................................................................................................................................... 17 7.2.3 Measuring Instruments............................................................................................................................... 18 7.2.4 Test Configuration ..................................................................................................................................... 18 7.2.5 Test Procedure ............................................................................................................................................ 19 7.2.6 Test Results ................................................................................................................................................ 20 7.3 6DB BANDWIDTH ....................................................................................................................................... 26 7.3.1 Applicable Standard ................................................................................................................................... 26 7.3.2 Conformance Limit .................................................................................................................................... 26 7.3.3 Measuring Instruments............................................................................................................................... 26 7.3.4 Test Setup ................................................................................................................................................... 26 7.3.5 Test Procedure ............................................................................................................................................ 26 7.3.6 Test Results ................................................................................................................................................ 26 7.4 DUTY CYCLE .......................................…

Text truncated - open the document above for the full version.

Test Report

Report No.: S21091502703003 Version.1.2 Page 1 of 258 FCC RADIO TEST REPORT FCC ID:2A2CZ-E134 Product: V2 Two-in-One Tablet Trade Mark: N/A Model No.: E134 Family Model: N/A Report No.: S21091502703003 Issue Date: Oct 14. 2021 Prepared for Emdoor digital technology Co.,Ltd Meigu bld, Wonderful life wisdom Valley technology Park, No.83 Dabao road, Baoan district, Shenzhen,China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: S21091502703003 Version.1.2 Page 2 of 258 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 4 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 5 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 6 3.1 FACILITIES..................................................................................................................................................... 6 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 6 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 6 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 7 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 9 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 11 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 11 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 12 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 13 7 TEST REQUIREMENTS .................................................................................................................................... 15 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 15 7.1.1 Applicable Standard ................................................................................................................................ 15 7.1.2 Conformance Limit .................................................................................................................................. 15 7.1.3 Measuring Instruments ........................................................................................................................... 15 7.1.4 Test Configuration ................................................................................................................................... 15 7.1.5 Test Procedure .......................................................................................................................................... 15 7.1.6 Test Results ............................................................................................................................................... 16 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 18 7.2.1 Applicable Standard ................................................................................................................................ 18 7.2.2 Conformance Limit .................................................................................................................................. 18 7.2.3 Measuring Instruments ........................................................................................................................... 19 7.2.4 Test Configuration ................................................................................................................................... 19 7.2.5 Test Procedure .......................................................................................................................................... 20 7.2.6 Test Results ............................................................................................................................................... 21 7.3 6DB BANDWIDTH ....................................................................................................................................... 28 7.3.1 Applicable Standard ................................................................................................................................ 28 7.3.2 Conformance Limit .................................................................................................................................. 28 7.3.3 Measuring Instruments ........................................................................................................................... 28 7.3.4 Test Setup .................................................................................................................................................. 28 7.3.5 Test Procedure .......................................................................................................................................... 28 7.3.6 Test Results ............................................................................................................................................... 29 7.4 DUTY CYCLE ........................................................................…

Text truncated - open the document above for the full version.

Test Report

Report No.: S21091502703003 Version.1.2 Page 92 of 258 OBW NVNT 802.11n(HT40) 2437MHz Ant 1 -6 dB BW NVNT 802.11n(HT40) 2437MHz Ant 1 Report No.: S21091502703003 Version.1.2 Page 93 of 258 OBW NVNT 802.11n(HT40) 2452MHz Ant 1 -6 dB BW NVNT 802.11n(HT40) 2452MHz Ant 1 Report No.: S21091502703003 Version.1.2 Page 94 of 258 OBW NVNT 802.11n(HT40) 2422MHz Ant 2 -6 dB BW NVNT 802.11n(HT40) 2422MHz Ant 2 Report No.: S21091502703003 Version.1.2 Page 95 of 258 OBW NVNT 802.11n(HT40) 2437MHz Ant 2 -6 dB BW NVNT 8…

Text truncated - open the document above for the full version.

Contact Information

Applicant

haitao wu(manager)
[email protected]+86-13049856008Fax: +86-755-83142771

Technical Contact

Emdoor digital technology Co.,Ltd
[email protected]

China

Test Firm

Shenzhen NTEK Testing Technology Co., Ltd.Alex Li
[email protected]+86-755-6115-9384

Technical Specifications

#Rule PartsFrequency RangePower Output
215C2.41 GHz - 2.46 GHz23.28 mW
Confidentiality
Long Term
Grant Notes
Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0mm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory is 0.62W/kg.

Other Applications from Emdoor digital technology Co.,Ltd

Notebook PC - FCC ID 2A2CZ-NP14IC-X - Emdoor digital technology Co.,Ltd
2A2CZ-NP14IC-X

Notebook PC

Feb 19, 2022

Equipment Class

NII - Unlicensed National Information Infrastructure TX