2A2EX-LS005WIFI5+BT5.2 Module

LS005ONWCS Datasheet IEEE 802.11 1X1 a/b/g/n/ac Wireless LAN Bluetooth 5.2 Combo Stamp Module Datasheet Version 1.1 Confidential and Proprietary of Luxshare-ict Electronic Technology (KUNSHAN) Ltd.，which are not permitted to disclose to others and shall not be distributed, reproduced, or disclosed LS005ONWCS Datasheet Date Revision Content Revised By Version 2022/01/25 Initial Release EE V1.0 2022/02/24 Modify BT Specification RF V1.1 Confidential and Proprietary of Luxshare-ict Electronic Technology (KUNSHAN) Ltd.，which are not permitted to disclose to others and shall not be distributed, reproduced, or disclosed LS005ONWCS Datasheet Contents 1. Introduction ............................................................................................................................................................. 3 2. Features ................................................................................................................................................................... 4 2.1 Wi-Fi Features ................................................................................................................................................ 4 2.2 Bluetooth Features ........................................................................................................................................ 4 3. Block Diagram .......................................................................................................................................................... 5 4. Specifications Table .................................................................................................................................................. 6 4.1 General Specification ..................................................................................................................................... 6 4.2 WLAN&BT Specification ................................................................................................................................. 7 4.2.1 2.4G WLAN Specification .................................................................................................................... 7 4.2.2 5G WLAN Specification ....................................................................................................................... 8 4.2.3 BT Specification ................................................................................................................................... 9 4.3 Operating Conditions ..................................................................................................................................... 9 5. Pin Assignments ..................................................................................................................................................... 10 5.1 Pin Map ........................................................................................................................................................ 10 5.2 Pin Definition ............................................................................................................................................... 11 5.3 Layout Recommendation ............................................................................................................................. 13 5.4 Physical Dimensions ..................................................................................................................................... 14 6. Electrical Characteristics ........................................................................................................................................ 15 6.1 Absolute Maximum Ratings ......................................................................................................................... 15 6.2 Recommended Operating Conditions .......................................................................................................... 15 6.3 DC Characteristics ........................................................................................................................................ 16 6.3.1 VIO DC characteristics-3.3V/1.8V operation ..................................................................................... 16 6.3.2 VIO_SD DC characteristics-1.8V operation ....................................................................................... 16 6.3.3 Power up Timing Sequence .............................................................................................................. 16 7. Host Interface ........................................................................................................................................................ 17 7.1 SDIO Interface .............................................................................................................................................. 17 7.1.1 Introduction ...................................................................................................................................... 17 7.1.2 SDIO Interface Signals ....................................................................................................................... 18 7.1.3 SDIO Timing Diagram—SDR12, SDR25, SDR50 Modes (up to 100 MHz) .......................................... 18 7.1.4 SDIO Timing Diagram—SDR104 mode (208MHz) ............................................................................. 19 7.1.5 SDIO Timing Diagram—DDR50 Mode (50 MHz) ............................................................................... 20 7.2 UART Host Interface ..................................................................................................................................... 22 7.2.1 High-Speed UART Specifications ....................................................................................................... 22 7.2.2 UART Timing Data ............................................................................................................................. 22 7.3 PCM Interface ...........…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Luxshare Electronic Technology (KunShan) Ltd. Address No.158,Jinchang Road,Jinxi Town,Kunshan City,Jiangsu Province,China Grantee Code 2A2EX FCC ID 2A2EX-LS005 Authorized Contact Name Lisa Zeng Contact Email [email protected] Contact Phone +86 13962660764 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 15th, June, 2022 Print Name: Lisa Zeng Title: Compliance Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Luxshare Electronic Technology (KunShan) Ltd. Date: 15 th, June, 2022 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: 2A2EX-LS005 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with <<Luxshare Electronic Technology (KunShan) Ltd.>>. This authorization is valid until further written notice from the applicant. Name (Printed):Lisa Zeng Title: Compliance Engineer Signature: On behalf of Company: Luxshare Electronic Technology (KunShan) Ltd. Telephone: +86 13962660764

Luxshare Electronic Technology (KunShan) Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Company Name: Luxshare Electronic Technology (KunShan) Ltd. Address: No.158,Jinchang Road, Jinxi Town Address: Kunshan City, Jiangsu Province, China Regarding: Confidentiality Request regarding application for FCC ID 2A2EX-LS005 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Lisa Zeng Title: Compliance Engineer Company Name: Luxshare Electronic Technology (KunShan) Ltd.

Luxshare Electronic Technology (KunShan) Ltd. 2022/08/15 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Dear Sir/Madam, Re: Request for FCC module certification FCC ID: 2A2EX-LS005 We hereby request a Modular certification for the FCC ID referenced above. The device meets the requirements below. • The module has metal case covering top and sides as its own RF shielding. The shielding at bottom is implemented by the GND copper plane in PCB substrate. Answer: Yes. Please see External Photo.pdf • The module has buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal; Answer: Yes. Independent ARM-based Wi-Fi and Bluetooth CPUs with internal SRAM for Tx frame queues/Rx data buffers, it's controlled by the chip 88W8987. • The module has power supply regulation on the module; Answer: Yes.The power supply of the module ranges from 3.07V to 3.53V.The analog parts of the module, Vcore, 1.8V and 2.2V, are provided by internal PMIC • The module has demonstrated compliance in a stand-alone configuration; Answer：Yes. please see test report • The module has a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b); Answer: Yes. please see test report & Internal Photos. • The module will be labeled with its permanently affixed FCC ID label. Answer: Yes. The label position of module is clearly indicated. Please see the Label & Location.pdf • The module does comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee; Answer: The module is compliant with all applicable FCC rules. Detail instructions are given in the User Manual • The module does comply with RF exposure requirements. Answer: Yes. The modular comply with applicable RF exposure requirements. Please see MPE Report. Sincerely, Name: Lisa Zeng Title: Compliance Engineer Company: Luxshare Electronic Technology (KunShan) Ltd. Telephone: 86 13962660764 Luxshare Electronic Technology (KunShan) Ltd. FCC Modular definitions, From FCC KDB 996369 D01 Module Equip Auth Guide v02 A. Single-modular transmitter is a self-contained, physically delineated, component for which compliance can be demonstrated independent of the host operating conditions, and which complies with all eight requirements of Section 15.212(a)(1) as summarized below. See Section 15.212 for more detailed information, and Section 2.901 (and sub- sections that follow) for general certification requirements. B. Limited single-modular transmitter is a transmitter that does not meet all eight requirements listed in Section 15.212(a) (1), and compliance can be demonstrated only for specific host and applicable operating conditions in which the transmitter will be used. For example, manufacturers have flexibility with respect to requirements such as module shielding, buffered modulation/data inputs and power supply regulation. If one or more of these functions (shielding, buffered modulation/data inputs and power supply regulation) are provided by a specific host or hosts, then the module can be granted as a limited module that is limited to that specific host or hosts. The responsible party must demonstrate how it will retain control over the final installation of the device, such that compliance of the product is ensured by limiting the installation to a specific host or hosts, for example.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 2 External Photos for KSCR2206000907AT Test Model No.: LS005ONWCS Compliance Certification Services (Kunshan) Inc. Page: 2 of 2 EUT Constructional Details (EUT Photos)

Compliance Certification Services (Kunshan) Inc. Page: 1 of 4 Internal Photos for KSCR2206000907AT Test Model No.: LS005ONWCS Compliance Certification Services (Kunshan) Inc. Page: 2 of 4 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 4 Compliance Certification Services (Kunshan) Inc. Page: 4 of 4

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220600090706 Page: 1 of 17 Eric Lin Laboratory Manager 1 Cover Page RF Exposure Evaluation Report Application No.: KSCR2206000907AT FCC ID: 2A2EX-LS005 Applicant: Luxshare Electronic Technology (Kunshan) Ltd. Address of Applicant: No. 158, Jinchang Road, Jinxi Town, Kunshan City, Jiangsu Province,China Manufacturer: Luxshare Electronic Technology (Kunshan) Ltd. Address of Manufacturer: No. 158, Jinchang Road, Jinxi Town, Kunshan City, Jiangsu Province,China Equipment Under Test (EUT): EUT Name: WIFI5+BT5.2 Module Model No.: LS005ONWCS Trade Mark: LUXSHAREICT Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2022-06-02 Date of Test: 2022-06-04 to 2022-08-03 Date of Issue: 2022-08-04 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220600090706 Page: 2 of 17 Revision Record Version Chapter Date Modifier Remark 01 2022-08-04 Original Authorized for issue by: Tommie_Tang/Project Engineer Eric Lin/Reviewer Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220600090706 Page: 3 of 17 2 Contents Page 1 COVER PAGE .................................................................................................................................... 1 2 CONTENTS ........................................................................................................................................ 3 3 GENERAL INFORMATION ................................................................................................................ 4 3.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................ 4 3.2 DETAILS OF E.U.T. ....................................................................................................................... 4 3.3 TEST LOCATION ............................................................................................................................ 6 3.4 TEST FACILITY .............................................................................................................................. 6 4 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .......................................................... 7 4.1 BLANKET 1 MW BLANKET EXEMPTION ........................................................................................... 7 4.2 MPE-BASED EXEMPTION .............................................................................................................. 7 4.3 SAR-BASED EXEMPTION ............................................................................................................... 8 5 MEASUREMENT AND CALCULATION .......................................................................................... 11 5.1 MAXIMUM TRANSMIT POWER ....................................................................................................... 11 5.2 RF EXPOSURE CALCULATION ...................................................................................................... 16 Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220600090706 Page: 4 of 17 3 General Information 3.1 General Description of E.U.T. Power supply: DC 3.3V 3.2 Details of E.U.T. 2.4G Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz; 802.11n(HT40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK); 802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Data Rate: 802.11b: 1/2/5.5/11Mbps, 802.11g: 6/9/12/18/24/36/48/54Mbps 802.11n: MCS0-7 Number of Channels: 802.11b/g/n(HT20):11;802.11n(HT40):7 Channel Spacing: 5MHz Antenna Type: PCB Antenna Antenna Gain: 3.21dBi(Provided by the manufacturer) BLE Power supply: DC 3.3V Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.2 Dual mode Modulation Type: GFSK Data Rate: 1/2Mbps Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PCB Antenna Antenna Gain: 3.21dBi(Provided by the manufacturer) BT Power supply: DC 3.3V Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.2 Dual mode Modulation Type: GFSK, π/4DQPSK, 8DPSK Data Rate: 1/2/3Mbps Number of Channels: 79 Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220600090706 Page: 5 of 17 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type: PCB Antenna Antenna Gain: 3.21dBi(Provided by the manufacturer) 5G Operation Frequency: Band Mode Frequency Range(MHz) Number of channels UNII Band I 802.11a/n(HT20)/ac(VHT20) 5180-5240 4 802.11n(HT40)/ac(VHT40) 5190-5230 2 802.11ac(VHT80) 5210 1 UNII Band II-A 802.11a/n(HT20)/ac(VHT20) 5260-5320 4 802.11n(HT40)/ac(VHT40) 5270-5310 2 802.11ac(VHT80) 5290 1 UNII Band II-C 802.11a/n(HT20)/ac(VHT20) 5500-5700 11 802.11n(HT40)/ac(VHT40) 5510-5670 5 802.11ac(VHT80) 5530~5610 2 UNII Band III 802.11a/n(HT20)/ac(VHT20) 5745-5825 5 802.11n(HT40)/ac(VHT40) 5755-5795 2 802.11ac(VHT80) 5775 1 Moudulation Type: 802.11a: OFDM (64QAM, 16QAM, QPSK, BPSK); 802.11n: OFDM (BPSK, QPSK, 16QAM, 64QAM); 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) Data Rate: 802.11a: 6/9/12/18/24/36/48/54Mbps 802.11n: MCS0-7 802.11ac: MCS0-9 Channel Spacing: 802.11a/n(HT20)/ac(VHT20): 20MHz; 802.11n(HT40)/ac(VHT40): 40MHz; 802.11ac(VHT80): 80MHz Antenna Type: PCB Antenna Antenna Gain: 5150-5250MHz: 3.35dBi(Provided by the manufacturer) 5250-5350MHz: 3.71dBi(Provided by the manufacturer) 5470-5725MHz: 3.83dBi(Provided by the manufacturer) 5725-5850MHz: 3.08dBi(Provided by the manufacturer) Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220600090706 Page: 6 of 17 3.3 Test Location All tests were performed at: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888 Fax: +86 512 5737 0818 No tests were sub-contracted. Note: 1.SGS is not respo…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220600090701 Page: 1 of 135 Eric Lin Laboratory Manager TEST REPORT Application No.: KSCR2206000907AT FCC ID: 2A2EX-LS005 Applicant: Luxshare Electronic Technology (Kunshan) Ltd. Address of Applicant: No. 158, Jinchang Road, Jinxi Town, Kunshan City, Jiangsu Province,China Manufacturer: Luxshare Electronic Technology (Kunshan) Ltd. Address of Manufacturer: No. 158, Jinchang Road, Jinxi Town, Kunshan City, Jiangsu Province,China Equipment Under Test (EUT): EUT Name: WIFI5+BT5.2 Module Model No.: LS005ONWCS Trade Mark: LUXSHAREICT Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-06-02 Date of Test: 2022-06-04 to 2022-08-03 Date of Issue: 2022-08-04 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. CCS Report No.: KSCR220600090701 Page: 2 of 135 Revision Record Version Chapter Date Modifier Remark 01 2022-08-04 Original Authorized for issue by: Tommie_Tang/Project Engineer Eric Lin/Reviewer Compliance Certification Services (Kunshan) Inc. CCS Report No.: KSCR220600090701 Page: 3 of 135 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Average Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Compliance Certification Services (Kunshan) Inc. CCS Report No.: KSCR220600090701 Page: 4 of 135 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 4.4 TEST LOCATION .................................................................................................................................... 8 4.5 TEST FACILITY ...................................................................................................................................... 8 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 8 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 9 5 EQUIPMENT LIST .................................................................................................................................... 10 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 11 6.1 ANTENNA REQUIREMENT .................................................................................................................... 11 6.1.1 Test Requirement: ....................................................................................................................... 11 6.1.2 Conclusion ................................................................................................................................... 11 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 12 7.1 CONDUCTED AVERAGE OUTPUT POWER .............................................................................................. 12 7.1.1 E.U.T. Operation .......................................................................................................................... 12 7.1.2 Test Mode Description ................................................................................................................. 12 7.1.3 Test Setup Diagram ..................................................................................................................... 13 7.1.4 Measurement Procedure and Data............................................................................................. 13 7.2 MINIMUM 6DB BANDWIDTH .................................................................................................................. 14 7.2.1 E.U.T. Operation .......................................................................................................................... 14 7.2.2 Test Mode Description ........…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Report No.: KSCR220600090702 Page: 1 of 78 Eric Lin Laboratory Manager TEST REPORT Application No.: KSCR2206000907AT FCC ID: 2A2EX-LS005 Applicant: Luxshare Electronic Technology (Kunshan) Ltd. Address of Applicant: No. 158, Jinchang Road, Jinxi Town, Kunshan City, Jiangsu Province,China Manufacturer: Luxshare Electronic Technology (Kunshan) Ltd. Address of Manufacturer: No. 158, Jinchang Road, Jinxi Town, Kunshan City, Jiangsu Province,China Equipment Under Test (EUT): EUT Name: WIFI5+BT5.2 Module Model No.: LS005ONWCS Trade Mark: LUXSHAREICT Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-06-02 Date of Test: 2022-06-04 to 2022-08-03 Date of Issue: 2022-08-04 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. CCS Report No.: KSCR220600090702 Page: 2 of 78 Revision Record Version Chapter Date Modifier Remark 01 2022-08-04 Original Authorized for issue by: Tommie_Tang/Project Engineer Eric Lin/Reviewer Compliance Certification Services (Kunshan) Inc. CCS Report No.: KSCR220600090702 Page: 3 of 78 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GH…

Text truncated - open the document above for the full version.