2A2H2-BDRV10BDRV10

INSTRUCTION MANUAL Robot Vacuum with Hands-Free Cleaning Technology BDRV10 Activate your Warranty, Watch the setup video, Get the Black + Decker Home app, Purchase accessories, Get support and more! Scan the QR code on top of your robot to access the following features! If at any point you are unsatisfied with your product, please consult our customer support line, check warranty information, contact one of our representatives at 1 - 8 5 5 - 4 5 4 - 8 078 o r q rco. d e / b d s u p p o r t TABLE OF CONTENTS Safety1 - 2 Setting Up The Roboseries8 Dustbin Overview5 Main Brush Maintenance11 Maintaining the Dustbin and Filters12 In The Box3 Robot Indicators6 Using the Black + Decker Home App9 Side Brush and Sensor Maintenance13 Product Overview4 Setting up the Charging Dock7 Using Your Roboseries10 Roboseries Troubleshoot14 Warranty15 1 SAFETY SAFETY DEFINITIONS WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury. CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. NOTICE: Indicates a hazardous situation that, if not avoided, could result in property damage. Before using this product, please read the following safety instructions and follow all safety precautions. Any operation inconsistent with this instruction manual may cause damage to this product. • Your robot is not a toy. Small children and pets should be supervised when your robot is operating. • Do not sit or stand on your robot. • Do not use unauthorized chargers. Use of an unauthorized charger could cause the battery to generate heat, smoke, catch fire or explode. Contact customer service for a replacement charger. • Do not open your robot except as instructed to maintain the dustbin and filter(s). Do not open the charging dock as there are no user serviceable parts inside. • Risk of electric shock. Only use indoors and in dry locations. • Do not handle your robot with wet hands. • Store and operate your robot in room temperature environments only. • Do not operate the robot in areas with exposed electrical outlets in the floor. • Do not attempt to open, crush or heat the battery of your robot above 175 ̊F. • Do not subject the battery to mechanical shock. • Do not operate the vacuum without the dustbin installed. • Do not short circuit the battery of your robot by allowing any metal objects to contact the battery terminal. • Do not immerse the battery in liquid. • Do not attempt to charge damaged or leaking battery packs. If battery leakage occurs, thoroughly wash any affected skin, making sure to keep battery acid away from eyes, ears, nose and mouth. Immediately wash any clothing or other surface that comes in contact with leaked battery acid. If a chemical burn occurs or if irritation persists, seek medical attention.Dispose according to Local, State or Federal regulations. • If the robot passes over a power cord there is a chance an object can be pulled off a table. Before using the robot, clear the floor of objects such as clothing, cords for blinds, curtains, power cords and any fragile objects which can be easily damaged. • Do not use the robot to pick up sharp objects, or anything that is burning or smoking. WARNING: CAUTION: 2 SAFETY • Battery acid leakage can cause personal injury and cause damage to the product and surrounding property. If battery leakage occurs, thoroughly wash any affected skin, making sure to keep battery acid away from eyes, ears, nose and mouth. Immediately wash any clothing or other surface that comes in contact with leaked battery acid. If a chemical burn occurs or if irritation persists, seek medical attention.Dispose according to Local, State or Federal regulations. • Batteries are to be inserted following the polarity markings on the product. • NEVER mix old and new batteries or different brands of batteries. Replace all batteries at the same time • NEVER mix alkaline, standard (carbon-zinc), rechargeable (nickel cadmium) batteries with this product • NEVER dispose of batteries in fire, as they may leak and explode. • Promptly remove exhausted batteries from product. • Remove batteries before extended storage. WARNING: • This robot is intended for dry floor use only. Do not use the robot to pick up any wet spills and do not allow the dustbin contents to become wet. • Do not place anything on top of your robot • Regularly wipe charge contacts on your robot and charge dock. Failure to maintain charge contacts could impact the robots ability to properly charge. • Product may not be used with any type of power converter. Use of power converters will void the warranty. • The battery pack must be removed from the robot before recycling or disposal. • Do not use non-rechargeable batteries in your robot. For battery replacement contact customer care. • Before long term storage of your robot, fully charge and remove the battery. NOTICE: BDRV10-ST-IB-V1 3 IN THE BOX 1: Charging Dock 2: Roboseries Vacuum BDRV10 3: Charging Adapter 4: Sidebrush 1 3 2 4 4 PRODUCT OVERVIEW FRONT BACK BOTTOM 3 1 4 5 6 7 2 CHARGING BASE 1: Power Button 2: WiFi Indicator 3: Home Button 4: Charging Contacts 5: Collision Sensor 6: Dustbin Release Latch 7: Dustbin 8: Charging Contacts 9: Side Brush 10: Omnidirectional Wheel 11: Detection Sensors 12: Left Wheel 13: Right Wheel 14: Main Brush 8 11 13 9 12 14 10 1: Bin/Filter Release Latch 2: HEPA Filter 3: Screen Filter (Non removable) 1 3 2 5 DUSTBIN OVERVIEW 1 3 2 1 4 3 2 • Hold to turn on/off • Press to start/pause cleaning • Blinking White: Standby Mode • Solid White (OFF Charge Base): Cleaning • Solid White (ON Charge Base): Fully Charged • Breathing White: Charging • Amber: Error • Lights off: Off/sleeping • Press to return to charging dock for recharging • Press and hold to initiate WiFi Setup • LED will remain lit when charging dock is connected to wall power. POWER BUTTONPOWER/HOME LED STATES WIFI INDICATOR STATES HOME BUTTON CHARGING DOCK WIFI INDICATOR • Blinking Whit…

Text truncated - open the document above for the full version.

Silver Point Innovations LLC NY Add: 261 5th avenue Suite 1512 New York NY 10016 Tel: +1-917-669-1210 Email: [email protected] Attestation Letter Date: 2024-03-11 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Silver Point Innovations LLC NY hereby authorize Bay Area Compliance Laboratories Corp. (Dongguan) to act as a laboratory for testing and test report generation for the following project(s): (Product description: BDRV10, Model: BDRV10-BLK , BDRV10-BLKS, BDRV10 PRO, FCC ID:2A2H2-BDRV10) 7KHSURGXFWVXSSRUWV*:L)LEJQKWDQG%/(0PRGHVWKHRWKHUIXQFWLRQVDUHGLVDEOHGE\XVLQJ WKHVRIWZDUHDQGWKHHQGXVHUFDQQRWDFWLYDWHWKHP Sincerely, Signature: Printed Name: Sean Chraime Title: CPO

Silver Point Innovations LLC NY Add: 261 5th avenue Suite 1512 New York NY 10016 Tel: +1-917-669-1210 Email: [email protected] CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Attestation Letter Date: 2024-03-11 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID:2A2H2-BDRV10 Silver Point Innovations LLC NY (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Silver Point Innovations LLC NY (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Printed Name: Sean Chraime Title: CPO

CFR 47 §2.911(d)(7) U.S Agent U.S. AGENT LETTER OF ATTESTATION Date: 2024-03-11 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID:2A2H2-BDRV10 Silver Point Innovations LLC NY (“the Applicant”) certifies that, as of the date of the filing of the application, Silver Point Innovations LLC NY (U.S. agent). is our designated U.S. agent for service of process for the above referenced FCC ID. Silver Point Innovations LLC NY (“the Applicant”)accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Silver Point Innovations LLC NY (U.S. agent) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Silver Point Innovations LLC NY Address: 261 5th avenue Suite 1512 New York NY 10016 FRN: 0031104359 Tel.: +1-917-669-1210 Email: [email protected] Signed by (printed name): Sean Chraime Signature:

QA-FR-170-B Silver Point Innovations LLC NY Add: 261 5th avenue Suite 1512 New York NY 10016 Tel: +1-917-669-1210 Email: [email protected] FCC Authorization Date: 2024-03-11 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Silver Point Innovations LLC NY, Hereby authorizes Bay Area Compliance Laboratories Corp. (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Sean Chraime Title: CPO

QA-FR-171-A Silver Point Innovations LLC NY Add: 261 5th avenue Suite 1512 New York NY 10016 Tel: +1-917-669-1210 Email: [email protected] FCC Confidential Authorization Date: 2024-03-11 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:2A2H2-BDRV10 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (Silver Point Innovations LLC NY) hereby requests long-term confidential treatment of information accompanying this application as outlined below: xBlock Diagram xSchematics xOperation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Sean Chraime Title: CPO

Silver Point Innovations LLC NY Add: 261 5th avenue Suite 1512 New York NY 10016 Tel: +1-917-669-1210 Email: [email protected] DECLARATION OF SIMILARITY Date: 2024-03-11 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We, Silver Point Innovations LLC NY, hereby declare that the product: BDRV10, FCC ID:2A2H2-BDRV10. model: BDRV10-BLKS, BDRV10 PRO is electrically identical with the model: BDRV10-BLK which was tested by Bay Area Compliance Laboratories Corp. (Dongguan). The Three models have the same working principle, functional structure, working voltage, product body material and Frequency Radio module (include Antenna). Each model has two configurations, and the differences between the two configurations are as follows: Product configuration Configuration 1Configuration 2 Appearance difference \ Different batteries Different motor Different fan Please contact me should there be need for any additional clarification or information. Best Regards, Signature: Printed Name: Sean Chraime Title: CPO

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-EXP Page 1 / 9 EUT EXTERNAL PHOTOS Configuration 1 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-EXP Page 2 / 9 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-EXP Page 3 / 9 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-EXP Page 4 / 9 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-EXP Page 5 / 9 Configuration 2 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-EXP Page 6 / 9 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-EXP Page 7 / 9 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-EXP Page 8 / 9 Charging Station Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-EXP Page 9 / 9 Adapter

2A2H2-BDRV10 10.8 BDRV10 BDRV10-BLK 0.515 30 SN:XXXXXXXXXXXX Silver Point innovations LLC NY Scan for Setup. Support and Registration

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 1 / 30 EUT INTERNAL PHOTOS Configuration 1 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 2 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 3 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 4 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 5 / 30 Antenna Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 6 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 7 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 8 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 9 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 10 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 11 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 12 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 13 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 14 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 15 / 30 Configuration 2 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 16 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 17 / 30

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 18 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 19 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 20 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 21 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 22 / 30 Antenna Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 23 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 24 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 25 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 26 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 27 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 28 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 29 / 30 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-INP Page 30 / 30

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-00A Report Template Version: FCC-BLE-V1.1 Page 49 of 49 APPENDIX C - RF EXPOSURE EVALUATION Applicable Standard According to subpart §1.1310,15.247(i) systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculation formula: Prediction of power density at the distance of the applicable MPE limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Calculated Data: Operation Mode Frequency (MHz) Antenna Gain Conducted output power including Tune- up Tolerance Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) (dBi) (numeric)(dBm)(mW) WLAN 2.4G 2412-2462 2.54 1.79 24 251.19 20.00 0.09 1.0 BLE 2402-2480 2.54 1.7975.01 20.00 0.002 1.0 Note: The Conducted output power including Tune-up Tolerance provided by manufacturer. The WLAN 2.4G and BLE can`t transmit simultaneously: Result: The device meet FCC MPE at 20 cm distance ***** END OF REPORT *****

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-00B Report Template Version: FCC-Wi-Fi-V1.1 Page 67 of 67 APPENDIX C - RF EXPOSURE EVALUATION Applicable Standard According to subpart §1.1310,15.247(i) systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculation formula: Prediction of power density at the distance of the applicable MPE limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Calculated Data: Operation Mode Frequency (MHz) Antenna Gain Conducted output power including Tune- up Tolerance Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) (dBi) (numeric)(dBm)(mW) WLAN 2.4G 2412-2462 2.54 1.79 24 251.19 20.00 0.09 1.0 BLE 2402-2480 2.54 1.7975.01 20.00 0.002 1.0 Note: The Conducted output power including Tune-up Tolerance provided by manufacturer. The WLAN 2.4G and BLE can`t transmit simultaneously: Result: The device meet FCC MPE at 20 cm distance ***** END OF REPORT *****

AntennaSpecification Manufacture：TUYA ProductName：WBR3Antenna AntennaType：PCB TestDate：2019.05.20 Testedby：LongWang Approvedby：Licco Content 1.GeneralDescription.................................................................................1 2.TestConfigurations...................................................................................2 2.1TestEnvironment............................................................................2 2.2TestEquipment...............................................................................2 2.3TestPrinciple...................................................................................2 3.TestResults..............................................................................................3 3.1GainandEfficiency..........................................................................3 3.2RadiationPattern............................................................................4 4.AntennaDimensions................................................................................6 5.EUTPhoto................................................................................................6 6.TestSetupPhoto......................................................................................7 1 1.GeneralDescription ManufacturerHangzhouTuyaInformationTechnologyCo.,Ltd Address Room701,Building3,MoreCenter,No.87GuDunRoad, Hangzhou,Zhejiang,China TestLocation Room106,Building3,LetongSciencePark,No.500, QiuyiRoad,BinjiangDistrict,Hangzhou ProductNameWBR3Antenna Productmodel WBR3 AntennaType PCBAntenna TestItems Gain;Efficiency;RadiationPattern TestFrequency 2400-2500MHz TestStandard ANSI/IEEEStd149-1979 2 2.Test Configurations 2.1 Test Environment Temperature (°C)25 Humidity (%RH)60 Atmospheric Pressure (kPa)100.5 2.2 Test Equipment Test SystemTEM 24 Multi-probe Microwave Chamber Test InstrumentAgilent E5071B 2.3 Test Principle Radio Communication Tester Network Analvzer Spectrum Analyzer Signal Getter 80cm Power Control Unit Transmission Switching Unit Signal Amplification Unit Instrument Switching Unit System Comtrol Unit Dual Plcar Probes 3 3.TestResults 3.1GainandEfficiency Frequency(MHz)PeakGain(dBi)Efficiency(%) 2400 1.6252.29 2410 1.7152.17 2420 1.9353.14 2430 1.9854.16 2440 2.0057.62 2450 2.1759.64 2460 2.4561.55 2470 2.3860.64 2480 2.5462.86 2490 2.3059.85 2500 2.4960.41 4 3.2RadiationPattern Phi02D Phi902D 5 Theta902D 2480MHz3D 6 4.AntennaDimensions 5.EUTPhoto 7 6.TestSetupPhoto

TEST REPORT Applicant: Silver Point Innovations LLC NY Address: 261 5th avenue Suite 1512 New York NY 10016 Product Name: BDRV10 FCC ID: 2A2H2-BDRV10 Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Report Number: DG2240131-07132E-RF-00A Report Date: 2024/3/21 The above device has been tested and found compliant with the requirement of the relative standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Gavin Xu Approved By: Ivan Cao Title: RF Engineer Title: EMC Manager Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: DG2240131-07132E-RF-00A Report Template Version: FCC-BLE-V1.1 Page 2 of 49 CONTENTS DOCUMENT REVISION HISTORY ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 1. GENERAL INFORMATION ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 5 1.1 GENERAL DESCRIPTION OF EQUIPMENT UNDER TEST ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 5 1.2 ACCESSORY INFORMATION ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 5 1.3 ANTENNA INFORMATION DETAIL▲ ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 5 1.4 EQUIPMENT MODIFICATIONS ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 5 2. DESCRIPTION OF TEST CONFIGURATION ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 6 2.1 OPERATION FREQUENCY DETAIL ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 6 2.2 EUT OPERATION CONDITION ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 6 2.3 EUT EXERCISE SOFTWARE ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 6 2.4 SUPPORT EQUIPMENT LIST AND DETAILS ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 6 2.5 SUPPORT CABLE LIST AND DETAILS ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 6 2.6 BLOCK DIAGRAM OF TEST SETUP ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 7 2.7 TEST FACILITY ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 8 2.8 MEASUREMENT UNCERTAINTY ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 8 3. SUMMARY OF TEST RESULTS ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 9 4. REQUIREMENTS AND TEST PROCEDURES ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 10 4.1 AC LINE CONDUCTED EMISSIONS ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 10 4.1.1 Applicable Standard ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 10 4.1.2 EUT Setupꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 11 4.1.3 EMI Test Receiver Setup ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 11 4.1.4 Test Procedure ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 12 4.1.5 Corrected Result & Margin Calculation ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 12 4.1.6 Test Result ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 12 4.2 RADIATION SPURIOUS EMISSIONS ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 13 4.2.1 Applicable Standard ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 13 4.2.2 EUT Setupꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 13 4.2.3 EMI Test Receiver & Spectrum Analyzer Setup ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 15 4.2.4 Test Procedure ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 15 4.2.5 Corrected Result & Margin Calculation ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 15 4.2.6 Test Result ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 15 4.3 MINIMUM 6 DB BANDWIDTH ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 16 4.3.1 Applicable Standard ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 16 4.3.2 EUT Setupꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 16 4.3.3 Test Procedure ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 16 4.3.4 Test Result ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 16 4.4 MAXIMUM CONDUCTED OUTPUT POWER ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 17 4.4.1 Applicable Standard ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 17 4.4.2 EUT Setupꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: Silver Point Innovations LLC NY Address: 261 5th avenue Suite 1512 New York NY 10016 Product Name: BDRV10 FCC ID: 2A2H2-BDRV10 Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Report Number: DG2240131-07132E-RF-00B Report Date: 2024/3/21 The above device has been tested and found compliant with the requirement of the relative standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Gavin Xu Approved By: Ivan Cao Title: RF Engineer Title: EMC Manager Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by…

Text truncated - open the document above for the full version.