2A2JY-DP1036UT2 Drawing Pad

Quick Guide --DP1036 01/Product Overview 1. Left speaker 2. Power button 3. Volume + 4. Volume - 5. Light sensor 6. Front camera 7. Right speaker 8. Rear camera 9. Microphone 10. Micro SD card slot 11. USB-C port 12. Headphone jack 02/Product Parameters Product name: UT2 Drawing Pad Product model: DP1036 Operating system: Android 14 CPU: MT8781N, 8-core processor Screen size: 10.36 inches Screen Resolution： 2000*1200 Power input: 5V3A or 9V2A Battery capacity: 7000mAh/3.85V Memory： LPDDR4X 6GB Storage: UFS2.2 128GB Wireless: Wi-Fi 2.4GHz & 5GHz + Bluetooth 5.3 Dimension: 247.1*156.8*7.5mm Camera: Front 8-megapixel, Fixed focus; Rear 8-megapixel, Automatic focus. 03/Package Includes 1. Drawing Pad x1 2. Stylus x1 3. Pen Clipper x1 4. Pen nibs x1 5. Power adapter x1 6. USB-C cable x1 7. Gloves x1 8. Eject pin x1 9. Smart Folio x1 10. Quick guide x1 11. Warranty card x1 04/Stylus Pen Before the first use, it is necessary to use the attached po wer adapter and USB cable to connect and activate the p ower to work normally To replace the nib, hold the front with the Pen Clipper, pull out the used refill, and replace it with a new one. 05/Charging and Using Micro SD Card As shown above, please charge the device using the accompanying power adapter and USB cable. * Please fully charge the battery before using the device for the first time. Please use the accompanying eject pin to eject the tray and then insert or remove the Micro SD card. 06/Important Safety Information Please read this chapter carefully before using your device. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. • The device consists of high-precision components, so no disassembly is permitted without authorization. In case of a device fault, please contact after-sales service in time for maintenance. • The device is not waterproof and needs to be protected against moisture and water. If water is accidentally spilled in, do not turn the device on. Do not clean the parts with any highly corrosive liquid. If necessary, please use a neutral detergent and a soft cleaning cloth. • Please protect the device against falls from heights or excessive pressure. Do not touch the display screen with sharp objects to avoid scratches. • Do not use, store, or vibrate the device in high temperature, high pressure, strong static, strong magnetic field, or dusty environment to avoid damage to the device. • Do not use your device when the vehicle is not safely parked. Using a hand-held device while driving is illegal in many countries. • Comply with restrictions on use specific to certain places (hospitals, planes, gas stations, schools, etc.). • Switch the device off before boarding an aircraft. • Switch the device off when you are in health care facilities, except in designated areas. • Switch the device off when you are near gas or flammable liquids. Strictly obey all signs and instructions posted in a fuel depot, petrol station, or chemical plant, or in any potentially explosive atmosphere when operate your device. • Turn off your mobile device or wireless device when in a blasting area or in areas posted with notifications requesting "two-way radios" or "electronic devices" are turned off to avoid interfering with blasting operations. Please consult your doctor and the device manufacturer to determine if operation of your device may interfere with the operation of your medical device. When the device is switched on, it should be kept at least 15 cm from any medical device such as a pacemaker, a hearing aid, or an insulin pump, etc. • Do not let children use the device and/or play with the device and accessories without supervision. • To reduce exposure to radio waves, it is recommended: - To use a hands-free kit; - Keep the device away from the belly of pregnant women or the lower abdomen of adolescents. • Do not allow your device to be exposed to adverse weather or environmental conditions (moisture, humidity, rain, infiltration of liquids, dust, sea air, etc.). The manufacturer’s recommended operating temperature range is 0°C (32°F) to 40°C (104°F). At over 40°C (104°F) the legibility of the device’s display may be impaired, though this is temporary and not serious. • Use only batteries, battery chargers, and accessories which are compatible with your device model. • Do not use a damaged device, such as a device with a cracked display or badly dented back cover, as it may cause injury or harm. • Do not keep device connected to charger with battery fully charged for a long period of time as it can cause overheating and shorten battery life. • Do not sleep with the device on your person or in your bed. Do not place the device under a blanket, pillow, or under your body, specially when connected to the charger. Do not charge the device in a confined space, as this may cause the device to overheat. • The UT2 Drawing Pad display delivers a matte tactile feel, protecting against smudges or fingerprints and produces a paper-like matte effect texture and provides resistance. This screen surface is different to standard smartphone screens. But note that it does not admit tempered glasses protection and is more vulnerable to scratches, so it is recommended to avoid the contact with other materials that can cause scratching. • Declaration of Conformity Hereby,[Hanvon Ugee Technology Co.,Ltd.] declares that the radio equipment type [DP1036] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.ugee.com/ • FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed…

Text truncated - open the document above for the full version.

Hanvon Ugee Technology Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Hanvon Ugee Technology Co., Ltd. Address: 2/F,West of 3/F,4/F,No.4 Bld,Fulongte Industrial Park,Langkou Community Dalang Str.,Longhua Dist, Shenzhen, China FCC ID: 2A2JY-DP1036 Model(s): DP1036, DP1001,DP1002,DP1003 2.911(d)(5)(i) Equipment Type We, [Hanvon Ugee Technology Co., Ltd.] certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Tiger Lee Date:2024.08.21 Title and Company name: manager / Hanvon Ugee Technology Co., Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Hanvon Ugee Technology Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Hanvon Ugee Technology Co., Ltd. Address: 2/F,West of 3/F,4/F,No.4 Bld,Fulongte Industrial Park,Langkou Community Dalang Str.,Longhua Dist, Shenzhen, China FCC ID: 2A2JY-DP1036 Model(s): DP1036, DP1001,DP1002,DP1003 2.911(d)(5)(ii) Applicant filing We, [Hanvon Ugee Technology Co., Ltd.] certify that, as of the date of the filing of the application, the applicant is is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Tiger Lee Date: 2024.08.21 Title and Company name: manager / Lumi Legend Corporation NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Hanvon Ugee Technology Co., Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/30/2024 U.S. Agent Designation Hanvon Ugee Technology Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2A2JY-DP1036): Name and company of U.S. agent:AOCE Corporation Inc. Physical U.S. address of agent:6547 N Academy Bivd #2266,Springs, COLORADO FRN of U.S. agent:0033401381 Email address of U.S. agent:[email protected] [AOCE Corporation Inc.] acknowledges their obligation to accept service of process on behalf of Hanvon Ugee Technology Co., Ltd AOCE Corporation Inc. accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). Sincerely, Signature Tiger Lee Manager Hanvon Ugee Technology Co., Ltd Signature [Johnson Wang] [PM] [AOCE Corporation Inc.] 48_[model] US_Agent_2.911(d)(7) - U, V03

Hanvon Ugee Technology Co., Ltd. Agent Authorization Company: Hanvon Ugee Technology Co., Ltd. Address: 2/F,West of 3/F,4/F,No.4 Bld,Fulongte Industrial Park,Langkou Community Dalang Str.,Longhua Dist, Shenzhen, China Product Name: UT2 Drawing Pad Trade Mark: ugee Model Number(s): DP1036, DP1001,DP1002,DP1003 FCC ID: 2A2JY-DP1036 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2024-08-12 Name: Tiger Lee Title: Manager Company: Hanvon Ugee Technology Co., Ltd.

Hanvon Ugee Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-08-12 Subject; Request for Confidentiality FCC ID: 2A2JY-DP1036 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM Software Security Requirements In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name / Title: Tiger Lee / Manager Company: Hanvon Ugee Technology Co., Ltd. Address: 2/F,West of 3/F,4/F,No.4 Bld,Fulongte Industrial Park,Langkou Community Dalang Str.,Longhua Dist, Shenzhen, China Phone: 13602658951 Fax: 086 02085589317 E-Mail: [email protected]

Hanvon Ugee Technology Co., Ltd. 2/F,West of 3/F,4/F,No.4 Bld,Fulongte Industrial Park,Langkou Community Dalang Str.,Longhua Dist, Shenzhen, China Date: Aug. 12, 2024 FCC ID: 2A2JY-DP1036 Model Number: DP1036, DP1001,DP1002,DP1003 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Hanvon Ugee Technology Co., Ltd. hereby declare that our product (UT2 Drawing Pad) Model Number: DP1036, DP1001,DP1002,DP1003 board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name / Title: Tiger Lee / Manager Company: Hanvon Ugee Technology Co., Ltd. Address: 2/F,West of 3/F,4/F,No.4 Bld,Fulongte Industrial Park,Langkou Community Dalang Str.,Longhua Dist, Shenzhen, China Phone: 13602658951 Fax: 086 02085589317 E-Mail: [email protected]

FCC ID: 2A2JY-DP1036 Fig. 1 Fig. 2 FCC ID: 2A2JY-DP1036 Fig. 3 Fig. 4 FCC ID: 2A2JY-DP1036 Fig. 5 Fig. 6 FCC ID: 2A2JY-DP1036 Fig. 7 Fig. 8

_____________________________________________________________________________________________________ LABEL AND LOCATION (Size: L6.5cm x 2.0cm) Label Location

FCC ID: 2A2JY-DP1036 Fig. 1 Fig. 2 FCC ID: 2A2JY-DP1036 Fig. 3 Fig. 4 FCC ID: 2A2JY-DP1036 Fig. 5 Fig. 6 FCC ID: 2A2JY-DP1036 Fig. 7 Fig. 8 BT&WLAN& Antenna FCC ID: 2A2JY-DP1036 Fig. 9 BT&2.4G WLAN&5G WLAN Antenna

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 58 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China SARTestReport For ApplicantName:HanvonUgeeTechnologyCo.,Ltd. Address: 2/F,Westof3/F,4/F,No.4Bld,FulongteIndustrialPark,Langkou CommunityDalangStr.,LonghuaDist,Shenzhen,China EUTName:UT2DrawingPad BrandName:UGEE ModelNumber:DP1036 SeriesModelNumber:DP1001,DP1002,DP1003 IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF240729R00501 TestStandards: 47CFRPart2.1093IEC/IEEE62209-1528:2020 IEEEC95.1-2019KDB447498D01KDB865664D01 KDB865664D02KDB248227D01KDB616217D04 KDB648474D04KDB690783D01 FCCID:2A2JY-DP1036 TestConclusion:Pass TestDate:2024-08-08to2024-08-09 DateofIssue:2024-08-12 PreparedBy: ZoeyZhang/TestEngineer PreparedBy: AmendaZhong/ProjectEngineer Date:2024-08-12 ApprovedBy: Ryan.CJ/EMCManager Date:2024-08-12 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF240729R00501 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 58 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02024-08-12Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF240729R00501 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 58 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1.Introduction...............................................................................................................................................................................4 1.1IdentificationofTestingLaboratory.................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation..........................................................................................................4 1.3LaboratoryCondition.......................................................................................................................................................4 1.4Announcement................................................................................................................................................................4 2.ProductInformation..................................................................................................................................................................5 2.1ApplicationInformation....................................................................................................................................................5 2.2ManufacturerInformation................................................................................................................................................5 2.3FactoryInformation.........................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT).....................................................................................................5 2.5EquipmentunderTestAncillaryEquipment....................................................................................................................5 2.6TechnicalInformation......................................................................................................................................................5 3.SummaryofTestResults.........................................................................................................................................................6 3.1TestStandards................................................................................................................................................................6 3.2DeviceCategoryandSARLimit......................................................................................................................................7 3.3TestResultSummary......................................................................................................................................................7 3.4TestUncertainty..............................................................................................................................................................8 4.MeasurementSystem.............................................................................................................................................................10 4.1SpecificAbsorptionRate(SAR)Definition....................................................................................................................10 4.2MVGSARSystem.........................................................................................................................................................10 5.SystemVerification.................................................................................................................................................................15 5.1PurposeofSystemCheck.............................................................................................................................................15 5.2SystemCheckSetup................................................…

Text truncated - open the document above for the full version.

中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中 检 （ 深 圳 ） 计 量 测 试 服 务 有 限 公 司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 证 书 CALIBRATION CERTIFICATE 证 书 编 号 : Certificate No. S423066282 第 1 页 共 6 页 Page of 客 户 信 息 Customer Information 客户名称: Name 信恒检测技术（深圳）有限公司 客户地址: Address 深圳市宝安区松岗街道潭头社区潭头工业城二区1栋厂房101.201.3 01 被 校 测 量 器 具 信 息 Information of Instrument under Calibration 仪器名称: Description 同轴机械校准件 型号规格: Model/Type 50Ω 35mm 9G 制造厂商: Manufacturer 南京普纳科技设备有限公司 出厂编号: Serial No. / 管理编号: Asset No. BTF-EM-068 接收日期: Received Date 2023/11/16 接收状态: As Received 正常 结 论: Conclusion 参照检测/校准结果使用。 The test or calibration results are referred to evaluate the validity of instrum ent measurement. 扫一扫查真伪 证书有效性声明： 1、证书首页盖有证书章 2、证书须有唯一防伪码 3、扫描信息与证书一致 校准日期: 2023 / 11 / 16 校准: Cal.DateCalibrated by 签发日期: 2023 / 11 / 17 核验: Issue DateInspected by 建议复校日期: 2024 / 11 / 15 签发: Next Cal. DateApproved by ( 总经理助理 ) 地址：深圳市光明区玉塘街道田寮社区同仁路盛荟红星创智广场网址(Web)：http://www.ccic-mts.com Addr：ShengHui Hongxing Chuangzhi Square, Tongren Road, Tianliao 电话(Tel)：0755-86139118 Community, Yutang Street, Guangming District, Shenzhen传真(Fax)：0755-86139110 邮政编码(Post No.)：518107邮箱(e-mail): [email protected] 证书专用章 Issued by 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中 检 （ 深 圳 ） 计 量 测 试 服 务 有 限 公 司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 说 明 CALIBRATION DIRECTIONS 证 书 编 号 : Certificate No. S423066282 第 2 页 共 6 页 Page of 1. 本公司实验室经中国合格评定国家认可委员会审核，符合ISO/IEC17025《检测和校准实验室能力的通用要求》的要求，认可 证书号：No.L3103。 This laboratory is accredited to ISO/IEC 17025《Requirements for the competence of Testing and Calibration Laboratories》,CNAS Accreditation Certificate No.L3103. 2．对本次校准若有异议，委托方应于收到被校件之日起十五日内向本公司提出。 If there is any objection concerning the calibration, the Client should inform the issuing company within 15 days from the date of the device under test return to the client. 3. 未经本公司许可，不得部分复印、摘用或篡改本证书的内容。 This report may not be reproduced, except in full, without the written approval of CCIC (ShenZhen) Metrology & Testing Service Co.,Ltd. 4. 本证书校准结果只与被校准仪器有关，带'*'号的校准项目或参数不在本公司实验室认可范围内。 The results reported here in apply only to the calibrated equipment，Calibration items or parameter with '* ' is beyond the scope of our laboratory acc reditation. 5. 本次校准的技术依据: Procedures for the Calibration: 参照JJG(电子)306001-2006《射频同轴阻抗标准器检定规程》 V.R. of RF Coaxial Impedance standard 参照 JZM 35118J-2017《微波元器件校准方法》 Microwave components calibration method 6. 本次校准所使用的主要标准器具： Standards Used in the Calibration: 器具名称 Instrument Description 编 号 Asset No. 证书编号 Certificate No. 有效期 Due Date 计量特性 Metrological Characteristic 溯源机构 Traceability institutions 网络分析仪/Vector Network Analyzer CCIC-WX-1024JL23155571512024/03/13 Sij模值:U=0.12dB;Sij相 位:U=0.9°;VSWR:U=0.0 30;(k=2) 深圳计量院 N型校准套件/Type- N Calibration Kit CCIC-WX-1006 GFJGJL1002220078 220 2025/04/28 Reflection:U=0.02(k= 2);Phase:U=1°(k=2); 二○三所 7.校准地点和环境条件： Place and environmental conditions: 地 点： 客户现场 实验室温 度： ( 23.5 ～ 24.5 )°C 相对湿度： ( 58 ～ 68 )% Place of Calibration TemperatureRelative Humidity 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中 检 （ 深 圳 ） 计 量 测 试 服 务 有 限 公 司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 结 果 CALIBRATION RESULT 证 书 编 号 : Certificate No. S423066282 第 3 页 共 6 页 Page of 1、 外观及正常性检查： Check on Appearance and Function： 2、 50Ω负载驻波比 50Ω load VSWR ± ± ± ± ± ± ± ± ± ± ± ± ± ± 3、 开路反射 Open circuit reflex ± ± ± ± 频率实测值允许误差 正常 Pass 结论 Conclusion （MHz）/（Ω）（P/F） FrequencyMeasuredMPE P 501.0030.00P 101.0040.00 P 2001.0050.00P 1001.0050.00 P 10001.0090.00P 5001.0060.00 P 30001.0170.00P 20001.0120.00 P 50001.0230.00P 40001.0210.00 P 70001.0180.00P 60001.0210.00 P 90001.0170.00P 80001.0150.00 结论 FrequencyMeasuredMPEConclusion 频率实测值允许误差 （P/F） 101.0000.00P （MHz）/（Ω） P 1001.0000.00P 501.0000.00 P2001.0000.00 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中 检 （ 深 圳 ） 计 量 测 试 服 务 有 限 公 司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 结 果 CALIBRATION RESULT 证 书 编 号 : Certificate No. S423066282 第 4 页 共 6 页 Page of ± ± ± ± ± ± ± ± ± ± 4、 开路相位 Open phase ± ± ± ± ± ± ± ± ± ± ± ± ± ± 5、 短路反射 5001.0000.00P P 20000.9990.00P 10001.0000.00 P 40000.9960.00P 30000.9980.00 P 60000.9920.00P 50000.9940.00 P 80000.9880.00P 70000.9890.00 P 频率实测值允许误差结论 90000.9870.00 10-0.231.0P 50-1.111.0F FrequencyMeasuredMPEConclusion （MHz）（°）（°）（P/F） 500-11.101.0F 1000-22.271.0F 100-2.221.0F 200-4.431.0F 4000-89.401.0F 5000-111.921.0F 2000-44.381.0F 3000-66.991.0F 8000179.051.0F 9000155.911.0F 6000-134.791.0F 7000-157.971.0F 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中 检 （ 深 圳 ） 计 量 测 试 服 务 有 限 公 司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 结 果 CALIBRATION RESULT 证 书 编 号 : Certificate No. S423066282 第 5 页 共 6 页 Page of Short circuit reflex ± ± ± ± ± ± ± ± ± ± ± ± ± ± 6、 短路相位 Short phase ± ± ± ± ± ± ± 结论 FrequencyMeasuredMPEConclusion 频率实测值允许误差 （P/F） 100.9990.00P （MHz）/（Ω） P 1000.9970.00P 500.9990.00 P 5000.9950.00P 2000.9970.00 P 20000.9880.00P 10000.9900.00 P 40000.9880.00P 30000.9870.00 P 60000.9890.00P 50000.9870.00 P 80000.9910.00P 70000.9910.00 P 频率实测值允许误差结论 90000.9920.00 10179.721.0F 50178.711.0F FrequencyMeasuredMPEConclusion （MHz）（°）（°）（P/F） 500167.821.0F 1000155.881.0F 100177.461.0F 200175.001.0F 2000132.231.0F 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中 检 （ 深 圳 ） 计 量 测 试 服 务 有 限 公 司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 结 果 CALIBRATION RESULT 证 书 编 号 : Certificate No. S423066282 第 6 页 共 6 页 Page of ± ± ± ± ± ± ± 说明(Notes) 1、本次校准的测量不确定度 Measurement Uncertainty in Calibration 1.1 依据JJF 1059.1-2012 测量不确定度评定与表示 Conform JJF 1059.1-2012 Evaluation and Expression of Uncertainty in Measurement. 1.2 本次测量结果的扩展不确定度（k=2） The Expanded Uncertainty of the Measurement Results 400089.781.0F 500062.691.0F 3000108.781.0F 80…

Text truncated - open the document above for the full version.

Test positions TOP (dist. 0mm) Back (dist. 0mm)

FCC ID: 2A2JY-DP1036 1 Case No. : CTA24070301801 Ambient Condition: 23 °C, 51 %RH According Standard: ■Part15C Test Date: 2024.6.9-2024.7.10 Test Engineer: Lushan Kong Appendix A.1: 20dB Emission Bandwidth Test Result TestMode Antenna Freq(MHz) 20dB EBW[MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict DH1 Ant1 2402 0.822 2401.559 2402.381 --- --- 2441 0.813 2440.571 2441.384 --- --- 2480 0.792 2479.586 2480.378 --- --- 2DH1 Ant1 2402 1.233 2401.373 2402.606 --- --- 2441 1.263 2440.358 2441.621 --- --- 2480 1.248 2479.364 2480.612 --- --- 3DH1 Ant1 2402 1.227 2401.388 2402.615 --- --- 2441 1.227 2440.388 2441.615 --- --- 2480 1.221 2479.391 2480.612 --- --- FCC ID: 2A2JY-DP1036 2 Test Graphs DH1_Ant1_2402 DH1_Ant1_2441 DH1_Ant1_2480 FCC ID: 2A2JY-DP1036 3 2DH1_Ant1_2402 2DH1_Ant1_2441 FCC ID: 2A2JY-DP1036 4 2DH1_Ant1_2480 3DH1_Ant1_2402 3DH1_Ant1_2441 FCC ID: 2A2JY-DP1036 5 3DH1_Ant1_2480 FCC ID: 2A2JY-DP1036 6 Appendix A.2: Occupied Channel Bandwidth Test Result TestMode Antenna Freq(MHz) OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict DH1 Ant1 2402 0.70856 2401.6235 2402.3320 --- --- 2441 0.71319 2440.6232 2441.3364 --- --- 2480 0.71557 2479.6204 2480.3359 --- --- 2DH1 Ant1 2402 1.1372 2401.4204 2402.5576 --- --- 2441 1.1368 2440.4187 2441.5555 --- --- 2480 1.1389 2479.4176 2480.5565 --- --- 3DH1 Ant1 2402 1.1287 2401.4330 2402.5617 --- --- 2441 1.1283 2440.4343 2441.5626 --- --- 2480 1.1274 2479.4318 2480.5592 --- --- FCC ID: 2A2JY-DP1036 7 Test Graphs DH1_Ant1_2402 DH1_Ant1_2441 DH1_Ant1_2480 FCC ID: 2A2JY-DP1036 8 2DH1_Ant1_2402 2DH1_Ant1_2441 FCC ID: 2A2JY-DP1036 9 2DH1_Ant1_2480 3DH1_Ant1_2402 3DH1_Ant1_2441 FCC ID: 2A2JY-DP1036 10 3DH1_Ant1_2480 FCC ID: 2A2JY-DP1036 11 Appendix A.3: Maximum conducted output power Test Result Peak Test Mode Antenna Freq(MHz) Conducted Peak Powert[dBm] Conducted Limit[dBm] Verdict DH1 Ant1 2402 14.67 ≤30.00 PASS 2441 14.82 ≤30.00 PASS 2480 14.86 ≤30.00 PASS 2DH1 Ant1 2402 13.90 ≤20.97 PASS 2441 13.99 ≤20.97 PASS 2480 14.11 ≤20.97 PASS 3DH1 Ant1 2402 13.83 ≤20.97 PASS 2441 13.93 ≤20.97 PASS 2480 13.25 ≤20.97 PASS FCC ID: 2A2JY-DP1036 12 Appendix A.4: Carrier frequency separation Test Result TestMode Antenna Freq(MHz) Result[MHz] Limit[MHz] Verdict DH1 Ant1 Hop_2402 0.988 ≥0.822 PASS Hop_2441 1.002 ≥0.822 PASS Hop_2480 1.004 ≥0.822 PASS 2DH1 Ant1 Hop_2402 0.992 ≥0.842 PASS Hop_2441 0.994 ≥0.842 PASS Hop_2480 0.994 ≥0.842 PASS 3DH1 Ant1 Hop_2402 1.17 ≥0.818 PASS Hop_2441 1.01 ≥0.818 PASS Hop_2480 0.992 ≥0.818 PASS FCC ID: 2A2JY-DP1036 13 Test Graphs DH1_Ant1_Hop_2402 DH1_Ant1_Hop_2441 DH1_Ant1_Hop_2480 FCC ID: 2A2JY-DP1036 14 2DH1_Ant1_Hop_2402 2DH1_Ant1_Hop_2441 FCC ID: 2A2JY-DP1036 15 2DH1_Ant1_Hop_2480 3DH1_Ant1_Hop_2402 3DH1_Ant1_Hop_2441 FCC ID: 2A2JY-DP1036 16 3DH1_Ant1_Hop_2480 FCC ID: 2A2JY-DP1036 17 Appendix A.5: Time of occupancy Test Result TestMode Antenna Freq(MHz) BurstWidth [ms] TotalHops [Num] Result[s] Limit[s] Verdict DH1 Ant1 Hop 0.365 320 0.117 ≤0.4 PASS DH3 Ant1 Hop 1.621 160 0.259 ≤0.4 PASS DH5 Ant1 Hop 2.873 80 0.23 ≤0.4 PASS 2DH1 Ant1 Hop 0.375 330 0.124 ≤0.4 PASS 2DH3 Ant1 Hop 1.626 180 0.293 ≤0.4 PASS 2DH5 Ant1 Hop 2.873 110 0.316 ≤0.4 PASS 3DH1 A…

Text truncated - open the document above for the full version.