2A2JY-Q8WBluetooth Graphics Drawing Tablet

1. Product overview ①. Power key Press and hold for 3 seconds to turn on/off Press and hold for 8 seconds to reset Short press 3 times pairing ②. Indicator light Red indicator status display a. Flashing: Low battery capacity < 20%, indicating that charging is required b. Always on: Battery is charging ⑥ c. Off: Automatic shutdown when the battery is fully charged or low Green indicator status display a. Flash: Wireless connection waiting for pairing b. Slow flash: Wireless connection waiting for connection c. Always on:Successful Bluetooth connection successful ③. USB-C Port ④. Pen box, open upward to store/take out the pen ⑤. Work area (drawing/writing) ⑥. A stylus accommodated in the pen box ④ 2. Accessories Stylus Nibs*5Pencil refillsUSB-A to C CableWarranty Card Quick GuideDigital Drawing Film 3. Bluetooth connection mode 3.1 Paired connection 3.1.1 Turn on the Bluetooth function of computer/mobile phone/tablet device. 3.1.2 Press and hold the power button for 3 seconds to turn on the machine and Bluetooth is in the state of waiting pairing (the indicator light flashes green). 3.1.3 Enter the interface of computer/mobile phone/tablet device Bluetooth connection , search the device name “Q8 W” and complete the pairing. 3.1.4 Run the driver, set the parameters and test the product performance (no driver is required for mobile phone/tablet products). 3.2 Reset and replace the paired equipment 3.2.1 Press and hold the power button for 8 seconds to reset. Warm tips : Theoretically, drawing through Bluetooth connection is supported on most mobile phones/tablets above Android 6.0. Still,a small portion of mobile phones/tablets users may encounter the failure of drawing with failed Bluetooth connectiondue to hardware performance mismatch. When this happens , it is suggested customers switching towired connection mode. Please contact customer service If you need any further assistance, . 4. Wired connection mode 4.1.1 Connect to computer/Android phone/Android tablet using a USB cable. 4.1.2 Run the driver, set the parameters and test the product performance (no driver is required for mobile phone/tablet products). 5. Driver download Login to the ugee official website (www.ugee.com.cn) to download the driver and complete the installation by following the guide steps (drivers are not required on mobile phone/tablet products ). 6. Replace the nibs 6.1 Pull out the refill by hand or other suitable tools. 6.2 Install the spare refill. FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction IC Caution: - English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. The device has been evaluated portable device RF exposure requirements. The device is kept at least 5 mm away from the user's body. - French: L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : L’appareil ne doit pas produire de brouillage; L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. L'appareil a été évalué selon les exigences d'exposition aux RF des appareils portables. L'appareil est maintenu à au moins 5 mm du corps de l'utilisateur. Warm tips:A piece of Pencil refillsis included in the setIf you want to draw on a piece of A5 paper onthe drawing board for writing and drawing. Customers can replace the nib witha pencil refillsto experiencing paper-screen synchronization on computer.

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HANVONUGEEUSAINCORPORATED FRN:0033760521 ContactName:DennisHoff Address:1200MainSTSTE400,Vancouver,WA,98660-2963,UnitedStates TelephoneNo:+1(855)451-1107 Email:[email protected] Applicant: Companyname:HanvonUgeeTechnologyCo.,Ltd. ProductDescription:BluetoothGraphicsDrawingTablet Granteecode:2A2JY FCCID:2A2JY-Q8W ContactName:TigerLee Address:2/F,Westof3/F,4/F,No.4Building,FulongteIndustrialPark,HuaxingRoad, LangkouCommunity,DalangStreet,LonghuaDistrict,Shenzhen,China TelephoneNo:13602658951 Email:[email protected] [HanvonUgeeTechnologyCo.,Ltd.]certifiesthat,asofthedateofthisfilingof theapplicationwiththeTCB,[HANVONUGEEUSAINCORPORATED]isourdesignated USagentforserviceofprocessfortheabovereferencedFCCID.[HANVONUGEE USAINCORPORATED]acceptstomaintainanagentfornolessthanoneyearafter thegranteehasterminatedallmarketingandimportationortheconclusionof anycommissionrelatedproceedinginvolvingequipment.[HANVONUGEEUSA INCORPORATED]accepts,asofthedateofthefilingoftheapplication,the obligationofthedesignatedUSagentforserviceofprocessfortheabove referenceFCCID. TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. 1/1 Date:16/05/2023 Applicant’sName:TigerLeeUSAgent’sName:DennisHoff Title:managerTitle:President SignatureSignature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Hanvon Ugee Technology Co., Ltd. Grantee code: 2A2JY FCC ID: 2A2JY-Q8W Contact Name: Tiger Lee Address: 2/F, West of 3/F, 4/F, No.4 Building, Fulongte Industrial Park, Huaxing Road, Langkou Community, Dalang Street, Longhua District, Shenzhen, China Telephone No: 13602658951 Fax No: 086 02085589317 Email: [email protected] i. [Hanvon Ugee Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Hanvon Ugee Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Hanvon Ugee Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment. Date: 04/05/2023 Applicant’s Name: Tiger Lee Title: manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

HanvonUgeeTechnologyCo.,Ltd. Familymodelsdeclarationletter. 5/4/2023 We Company:HanvonUgeeTechnologyCo.,Ltd. Address:2/F,Westof3/F,4/F,No.4Building,FulongteIndustrialPark,HuaxingRoad,Langkou Community,DalangStreet,LonghuaDistrict,Shenzhen,China Product:BluetoothGraphicsDrawingTablet ModelName:Q8W FamilyModel:Q8WPro,Q8WPlus,Q8WSE AllthemodelarethesamecircuitandRFmodule,exceptthemodelnames. We(HanvonUgeeTechnologyCo.,Ltd.)herebystatethatallthemodelsareelectricalidentical includingthesamesoftwareparameterandhardwaredesign(i.e.,circuitdesign,PCBLayout,RF module/circuit,antennatype(s)andantennalocation,componentsonPCB,etc.),samemechanical structureanddesign(includingproductenclosure,materials,etc.),theonlydifferenceisthemodel names. Thanks Sincerely, Signature [Name]TigerLee [Title]Gernalmanager [email protected]

C5266091_X8_Ed.1 1/1 LetterofAuthorization <HanvonUgeeTechnologyCo.,Ltd.> Company:HanvonUgeeTechnologyCo.,Ltd. Address:2/F,Westof3/F,4/F,No.4Building,FulongteIndustrial Park,HuaxingRoad,LangkouCommunity,DalangStreet,Longhua District,Shenzhen,China ProductName:BluetoothGraphicsDrawingTablet ModelNumber:Q8W,Q8WPro,Q8WPlus,Q8WSE FCCIdentifier:2A2JY-Q8W WeauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdelCarme,s/n, 08193Bellaterra,Spain,toactonourbehalfonallmattersconcerningthe abovenamedequipment. AnyindividualwithinLGAITechnologicalCenterS.A.isauthorizedtoactonour behalfandtakeactionontheapplication. WedeclarethatauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdel Carme,s/n,08193Bellaterra,Spain,isallowedtoforwardallinformation relatedtotheapprovalprojecttotheFederalCommunicationCommissionand todiscussanyissuesconcerningtheapprovalapplication.Anyandallacts carriedoutbyLGAITechnologicalCenterS.A.onourbehalfshallhavethe sameeffectasactsofourown. Name:TigerLeeDate:04/05/2023 Title:generalmanager Signatureofapplicant:

C5266091_X10_Ed.2 1/1 < HanvonUgeeTechnologyCo.,Ltd. > OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046Date:04/05/2023 Subject:RequestforConfidentiality FCCID:2A2JY-Q8W ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality NOTE2 IDLabel/Location AttestationStatement ExternalPhotos BlockDiagram Schematics TestReport TestSetupPhotos User’sManual NOTE 1 InternalPhotos NOTE 1 PartsList/TuneUp/BOMList RFExposureInfo OperationalDescription CoverLetter(s) FCCSoftwareSecurity RequirementsforUNIIdevices NOTE1:Long-TermConfidentialitymaybepermittedunderspecialconditions(SeeII.LONG-TERMCONFIDENTIALITY,Section3of KDB726920,uselastinforce) NOTE2:Short-TermConfidentialitycanberequestedforamaximumof180daysfromthedateofthegrant. Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Incaseofshort-termConfidentiality,theapplicantrequeststheexhibitsselected abovearewithheldfrompublicviewforaperiodof_180_daysfromthedateofthe GrantofEquipmentAuthorizationandpriortomarketing. C5266091_X10_Ed.2 1/1 Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. Sincerely, Signature: Name:TigerLee Title:generalmanager

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8

49.5mm*29.5mm

Photo 9 Photo 10 Photo 11 Photo 12 ANT Photo 13 Photo 14 Photo 15

FCC ID: 2A2JY-Q8W Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. BLE: Antenna Type: PCB Antenna Antenna Gain: 3.64 dBi Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n 1g SAR Exclusion threshold SAR test exclusion 2.402-0.580.8750±11.01.259<50.390233.00YES 2.440-0.690.8530±11.01.259<50.393303.00YES 2.480-1.060.783-1±10.01.000<50.314963.00YES 2.402-0.560.8790±11.01.259<50.390233.00YES 2.440-0.690.8530±11.01.259<50.393303.00YES 2.480-1.090.778-1±10.01.000<50.314963.00YES GFSK(1M ) GFSK(2M ) Conclusion: For the max result : 0.39330≤ 3.0 for 1-g SAR, No SAR is required. Signature: Date: 2023-05-06 NAME AND TITLE (Please print or type): Alex /Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China

地 址：深圳市宝安区石岩坑尾大道39号弘昌工业园A栋2楼 邮 编：518108 电 话：0755-29683233 传 真：0755-29683337 E-mail：[email protected] [email protected] BKGA518B adopts on-board PCB antenna, the plate is FR-4, 2-layer board, and the thickness of the plate is 0.8mm Manufacture: SHENZHEN FREERULE COMMUMNICATION TECHNOLOGY CO., LTD model: BKGA518B 1. Antenna Dimensions： 2. Antenna efficiency and gain Test Point ID Freq(Mhz) Efficiency(%) Gain(dBi) 1 2400 45.3% 2.54 2 2410 45.6% 2.87 3 2420 46.6% 2.89 4 2430 48.3% 3.12 5 2440 48.9% 3.24 地 址：深圳市宝安区石岩坑尾大道39号弘昌工业园A栋2楼 邮 编：518108 电 话：0755-29683233 传 真：0755-29683337 E-mail：[email protected] [email protected] 6 2450 48.1% 3.46 7 2460 49.6% 3.52 8 2470 49.8% 3.64 9 2480 49.0% 3.05 10 2490 47.8% 2.77 11 2500 46.2% 2.13 3. Antenna pattern 2470MHz: 地 址：深圳市宝安区石岩坑尾大道39号弘昌工业园A栋2楼 邮 编：518108 电 话：0755-29683233 传 真：0755-29683337 E-mail：[email protected] [email protected] BT Antenna Standing Wave Ratio Curve

Report No.: S23022701209001 Version.1.3 Page 1 of 63 RADIO TEST REPORT FCC ID: 2A2JY-Q8W Product: Bluetooth Graphics Drawing Tablet Trade Mark: UGEE Model No.: Q8W Family Model: Q8W Pro, Q8W Plus, Q8W SE Report No.: S23022701209001 Issue Date: Apr 12, 2023 Prepared for Hanvon Ugee Technology Co., Ltd. 2/F, West of 3/F, 4/F, No.4 Building, Fulongte Industrial Park, Huaxing Road, Langkou Community, Dalang Street, Longhua District, Shenzhen, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: S23022701209001 Version.1.3 Page 2 of 63 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................... 9 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ....................................................................... 9 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 10 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 11 7 TEST REQUIREMENTS .................................................................................................................................... 13 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 13 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 16 7.3 6DB BANDWIDTH ....................................................................................................................................... 25 7.4 DUTY CYCLE ............................................................................................................................................... 26 7.5 PEAK OUTPUT POWER .............................................................................................................................. 28 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 29 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 31 7.8 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................................ 32 7.9 ANTENNA APPLICATION .......................................................................................................................... 33 8 TEST RESULTS ................................................................................................................................................... 34 8.1 1M .................................................................................................................................................................. 34 8.2 2M .................................................................................................................................................................. 49 Report No.: S23022701209001 Version.1.3 Page 3 of 63 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : Hanvon Ugee Technology Co., Ltd. Address ....................................... : 2/F, West of 3/F, 4/F, No.4 Building, Fulongte Industrial Park, Huaxing Road, Langkou Community, Dalang Street, Longhua District, Shenzhen, China Manufacturer's Name .................. : Hanvon Ugee Technology Co., Ltd. Address ....................................... : 2/F, West of 3/F, 4/F, No.4 Building, Fulongte Industrial Park, Huaxing Road, Langkou Community, Dalang Street, Longhua District, Shenzhen, China Product description Product name .............................. : Bluetooth Graphics Drawing Tablet Trademark ................................. : UGEE Model and/or type reference ...... : Q8W Family Model ............................... : Q8W Pro, Q8W Plus, Q8W SE Test Sample Number ................... : S230227012011 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approv…

Text truncated - open the document above for the full version.

Radiated Measurement Photos Conducted Measurement Photos