2A2NS-17AIRFoldable Wireless Charger

After-sale Service Method of Operation 正 反 4. Please use other 18W adapter and charging cable to check if the adapter and cable are damaged. 5. Please make sure that the thickness of the phone case is <=4mm (if there is a case) and there are no any metal, pop rings, credit cards or magnetic interference charges. 6. Please align the coil of your devices with the charging center. 7. Update your device to the latest system and restart the device. Q：What should I do if the charging is slow? A: Please check the following steps: 1. Please make sure to use the 18W adapter and cable provided in the package. 2. Charging efficiency depends on the receiving power of your devices and it is not recommended to keep the APP running during slow charging. Q: What should I do if the charger heats up during charging? A: Please check the following steps: 1. It is normal for the receiving coil or transmitter board to generate heat during wireless charging. lf the charger is too hot please take your phone off from charger to wait the charger to cool down and charge again. 2. It is recommended to avoid using the charger in high temperature and sun exposure environments as possible. Any other questions, please contact us through the Amazon Message Center or AFTER-SALES [email protected] for solution. Please read the instructions carefully before using This product is a 3 in 1 multi-functional wireless charging station, which supports fast charging for phone, iWatch and AirPods at the same time, it provides high efficiency and stable wireless charging for you. 1. Do not disassemble or throw the product into fire or water to avoid short circuit. 2. Do not use wireless charger in extremely hot, humid or corrosive environment. 3. Make sure there are no any metal, pop rings, credit cards or magnetic interference charges. 4. Keep out of reach of children and pets . 5. lf the charging station overheats and stops charging during use, please remove the charging device and try charging after cooling down. 6. Avoid dropping the product from high place. If there are any issues with the item, please contact us through the Amazon Message Center or at [email protected] In order to deal with problems more efficiently for you, please prepare the following information: the issue of charger, your devices’ model, the type of adapter and the phone case you are using, and if possible you can attach a picture or video of the problem. Package List 1. Foldable wireless charger * 1 2. Type-C charging cable * 1 3. 18W adapter * 1 4. User manual * 1 1. Phone Phone with wireless charging function and compatible with charging protocol 2. iWatch Apple Watch 8/7/6/5/4/3/2/SE/Ultra 3. AirPods AirPods Charging: for AirPods 2/3/Pro/Pro2(can work with A2700，A2566， A2190，A1938 AirPods case） FCC RF Radiation Exposure Statement: 1.This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2.This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 15cm between the radiator and your body.

Guanyu(Dongguan) Intelligent Technology Co.,Ltd. Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Guanyu(Dongguan) Intelligent Technology Co.,Ltd. Address: 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City Guangdong China Product Name: Foldable Wireless Charger FCC ID: 2A2NS-17AIR Model(s): 17Air 2.911(d)(5)(i) Equipment Type We, [Guanyu(Dongguan) Intelligent Technology Co.,Ltd. ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: ManFang Wu Date: 2023-11-06 Title: Manger NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Guanyu(Dongguan) Intelligent Technology Co.,Ltd. Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Guanyu(Dongguan) Intelligent Technology Co.,Ltd. Address: 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City Guangdong China Product Name: Foldable Wireless Charger FCC ID: 2A2NS-17AIR Model(s): 17Air 2.911(d)(5)(ii) Applicant filing We, [Guanyu(Dongguan) Intelligent Technology Co.,Ltd. ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: ManFang Wu Date: 2023-11-06 Title: Manger NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

Guanyu(Dongguan) Intelligent Technology Co.,Ltd. Section 2.911(d)(7) USA Agent for Service of Process Company name: Guanyu(Dongguan) Intelligent Technology Co.,Ltd. Address: 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City Guangdong China Product Name: Foldable Wireless Charger FCC ID: 2A2NS-17AIR Model(s): 17Air 2.911(d)(7) USA Designated Agent for Service of Process We, [Guanyu(Dongguan) Intelligent Technology Co.,Ltd. ] (“the applicant”) designate [Wilson Tech Service LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Wilson Tech Service LLC Address: 1312 17th Street Suite 692, Denver, CO, 80202, US FRN: 0033402033 Contact Name: Wilson Cheung Telephone No: +1-716-965-5112 Email: [email protected] Applicant Company name: Guanyu(Dongguan) Intelligent Technology Co.,Ltd. Address: 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City Guangdong China FRN: 0031164734 FCC Grantee Code: 2A2NS Contact Name: ManFang Wu Telephone No: 15815564997 Email: [email protected] 2.911 (d)(7)USA Agent v1.2 Guanyu(Dongguan) Intelligent Technology Co.,Ltd. Signature: Title: Manager Signature: Title: Manager Date: 2023-11-06 Date: 2023-11-06 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threat s-to -the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

Guanyu(Dongguan) Intelligent Technology Co.,Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-11-06 Subject; Request for Long Term Confidentiality FCC ID: 2A2NS-17AIR To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: ManFang Wu Title: Manger

Letter of Authorization Company: Guanyu(Dongguan) Intelligent Technology Co.,Ltd. Address: 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City Guangdong China Product Name: Foldable Wireless Charger Model Number: 17Air FCC Identifier: 2A2NS-17AIR We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: ManFang Wu Date: 2023-11-06 Title: Manger

东莞市德弗力五金电子材料有限公司 Dongguan city DFL Electronic Technology Co.,LTD 承 认 书 客户名称(CUSTOMER): 客户料号(PART NO.): 品 名(DESCRIPTION): 规格(SPECIFICATION): 东莞市石碣镇新风西路107号 电话：0769-86016320 传真：0769-86372427 第 1 页 共 2 页 日 期(DATE): 19.5x27.5,0.08×105P，磁边起8MM 20230907 SPECIFICATION FOR APPROVEAL 本司确认（TRX APPROVAL） 制作 审核 客户确认（CUSTOMER APPROVAL） 确认结果(Result): 合格不合格 其它 承认日期 工程 批准 承认日期 曾小仙 邱志辉 20230907 双线圈+磁片 ZLGD-A1-0241 ZLGD-F19.5×27.5-8-FR 产品型号: SPECIFICATION 二、原理图（schematic diagram:） 拟制/日期PREPARED BY/DATE 审核/日期CHECKED BY/DATE 东莞市德弗力五金电子材料有限公司 Dongguan city DFL Electronic Technology Co.,LTD DESC Rev:B 版本 Customer: Date: Description: 一、尺寸DIMENSION:(mm) A B C D E F G I 注: 三、绕线参数(WindingSpecification:) 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction 四、电气特性 ELECTRICAL CHARACTERISTICS: 温度 TEMPERATURE:25±10°C,湿度 RELATIVE HUMIDITY:65±20% 序号 NO. 客户/日期CUSTOMEU/DATE 端子 TERMINAL 项目 ITEM 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1 2 3 4 IND. IND. Q值 DCR 20230907 27.5±1.0 19.5±1.0 1 0.08×105P丝包线 9TS 逆时针 1.线圈贴 51.5*46.5*1.0负 公差双拼硬磁 2.磁片贴白色带耳 朵双面胶 3.上线圈距磁片 5.5MM，下线圈距 磁片4.0MM 4.侧边出线 5.线圈不可松线 J K L 19.5±1.0 M N O P 7.0uH±0.3加磁片 100KHz/1.0V SHDA 1062 H 双线圈+磁片 48.0±1.5 41.0±1.5 27.5±1.0 41.0±1.5 49.0±1.5 8.0+2.0 1.0±0.2 3.0±2.0 93.0-1.0 51.5-1.0 4.0±1.0 5.5±1.0 B D A C I F H E G J M K O N L ZLGD-F19.5×27.5-8-FR ZLGD-A1-0241

惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD SPECIFICATIONSSHEET CUSTOMER: 客户 DESCRIPTION: 品名描述 CUSTOMERP/N: 客户品名 PARTNUMBER: 制造商料号 DATEOFAPPLICATION: 提出日期 中利冠达 苹果手表线圈-8mm 2022-12-08 CLASSIFICATIONOFSPEC.PRESENTATION.(Ticktherelevantbox"√") oNewapplication新规格 √Newpartisaddedtoacceptedspecification新产品规格追加记录 oRevisionofacceptedspecification既存规格图面变更 ACCEPTANCESTAMP() APPROVALBY 承认 CHECKBY 审查 PREPAREBY 制作 ADDRESS:3rdFloor,No.181,Mingyue2ndRoad,ShiwanTown,BoluoCounty,Huizhoucity TELPHONE:0752-6668681 E-MAIL:[email protected] 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD HistoryForRevisedSpecification CUSTOMERP/N: 客户品名 中利冠达 PARTNUMBER: 制造商料号 Item 项次 DESCRIPTION(ContentOrReasonForChanged) 变更内容 Rev. 版本 CustRev. 客户版本 Date 日期 Revisor 修订者 1 InitialRelease(初版发行) A0 2022-12-08 陈骏 APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 晁子奇 陈骏 2022-12-08 1of3 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD Specification 规格内容 CUSTOMERP/N: 客户品名 中利冠达 PARTNUMBER: 制造商料号 1.DIMENSIONS():(Unit:mm) 单位（Unit）：毫米（mm） ABCDEF 21Max 14±0.57.5±0.58±11.5±0.5 2.8Max 1.软磁出线处开线槽。 2.磁铁尺寸φ7.5*2.2,磁力3000GS±150 APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 2022-12-08 2of3 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD Specification 规格内容 CUSTOMERP/N: 客户品名 中利冠达 PARTNUMBER: 制造商料号 2.WINDINGDETAILS(绕线详细说明) Coil1 圈数 Turns 线径 WireDia 绕线方式疏/密 Wdg.Type Spred/Close 绕线方向 Wdg.Direction 相交是/否 Intersect Yes/Not 14TS 0.08*24P热风绞线(HotAir strandedWire) 密绕（Close） 逆绕 是（Yes） 3.电气特性（ELECTRICALCHARACTERISTICS）: 温度TEMPERATURE:25±10,RELATIVEHUMIDITY:6510% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS Coil1 1.INDS-F 8.1±0.3 100kHz/VUC2906A 2.QS-F 20Min 100kHz/VUC2906A 3. DCRS-F 135Max 100kHz/VUC2906A APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 2022-12-08 3of3

Model:17Air External Model:17Air

Label&Location Foldable Wireless Charger Model: 17Air FCC ID: 2A2NS-17AIR

Model:17Air Internal Model:17Air Model:17Air Model:17Air

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 14 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Exposure Report For Applicant Name: Guanyu (Dongguan) Intelligent Technology Co., Ltd. Address: 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City Guangdong China EUT Name: Foldable Wireless Charger Brand Name: N/A Model Number: 17Air Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230919R00502 Test Standards: 47 CFR Part 1 Subpart I Section 1.1310 FCC ID: 2A2NS-17AIR Test Conclusion: Pass Test Date: 2023-09-19 to 2023-10-27 Date of Issue: 2023-11-02 Prepared By: Chris Liu / Project Engineer Date: 2023-11-02 Approved By: Ryan.CJ / EMC Manager Date: 2023-11-02 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230919R00502 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 14 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-11-02 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230919R00502 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 14 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................................ 4 1.1 Identification of Testing Laboratory ................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ...................................................................................................... 4 1.3 Laboratory Condition ........................................................................................................................................................... 4 1.4 Announcement ....................................................................................................................................................................... 4 2. Product Information .............................................................................................................................................................................. 5 2.1 Application Information ....................................................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................................................... 5 2.3 General Description of Equipment under Test (EUT)................................................................................................... 5 2.4 Test Mode ................................................................................................................................................................................ 6 2.5 Test Auxiliary Equipment .................................................................................................................................................... 7 3. Test Requirement ................................................................................................................................................................................. 7 3.1 Assessment Result ............................................................................................................................................................. 10 3.2 Test Set-up Photo ................................................................................................................................................................ 11 Test Report Number: BTF230919R00502 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 4 of 14 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 1. Introduction 1.1 Identification of Testing Laboratory Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Phone Number: +86-0755-23146130 Fax Number: +86-0755-23146130 1.2 Identification of the Responsible Testing Location Test Location: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Description: All measurement facilities used to collect the measurement data are located at F101,201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China FCC Registration Number: 518915 Designation Number: CN1330 1.3 Laborator…

Text truncated - open the document above for the full version.

东莞市德弗力五金电子材料有限公司 Dongguan city DFL Electronic Technology Co.,LTD 承 认 书 客户名称(CUSTOMER): 客户料号(PART NO.): 品 名(DESCRIPTION): 规格(SPECIFICATION): 东莞市石碣镇新风西路107号 电话：0769-86016320 传真：0769-86372427 第 1 页 共 2 页 日 期(DATE): 15x38.5,0.08×105P丝包线，磁边起30MM 20230821 SPECIFICATION FOR APPROVEAL 本司确认（TRX APPROVAL） 制作 审核 客户确认（CUSTOMER APPROVAL） 确认结果(Result): 合格不合格 其它 承认日期 工程 批准 承认日期 曾小仙 邱志辉 20230821 线圈+磁片 ZLGD-A1-0240 ZLGD-Y15X38.5-18-FR A B F E C D A B C D E F G I 注: 三、绕线参数(WindingSpecification:) 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction 四、电气特性 ELECTRICAL CHARACTERISTICS: 温度 TEMPERATURE:25±10°C,湿度 RELATIVE HUMIDITY:65±20% 序号 NO. 客户/日期CUSTOMEU/DATE 端子 TERMINAL 项目 ITEM 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1 2 3 4 IND. IND. Q值 DCR 20230821 15.0±1.0 38.5±1.5 1 0.08×105P丝包线 12TS 逆时针 1.线圈贴G44*0.8 硬磁 2.线圈出线位置缠 8MM高温胶带 3.磁片背面贴带耳 朵双面胶 4.线圈歪贴 5.线圈不可松线 J K L 44.0±1.0 M N O P 6.8uH±0.3加磁片 100KHz/1.0V SHDA 1062 H 线圈+磁片 3.0±2. 18.0±2.0 0 0.8±0.2 ZLGD-Y15X38.5-30-FR ZLGD-A1-0240 产品型号: SPECIFICATION 二、原理图（schematic diagram:） 拟制/日期PREPARED BY/DATE 审核/日期CHECKED BY/DATE 东莞市德弗力五金电子材料有限公司 Dongguan city DFL Electronic Technology Co.,LTD DESC Rev:A 版本 Customer: Date: Description: 一、尺寸DIMENSION:(mm)

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 38 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: Guanyu(Dongguan) Intelligent Technology Co.,Ltd. Address: 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City Guangdong China EUT Name: Foldable Wireless Charger Brand Name: N/A Model Number: 17Air Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230919R00501 Test Standards: 47 CFR Part 15 Subpart C FCC ID: 2A2NS-17AIR Test Conclusion: Pass Test Date: 2023-09-19 to 2023-10-27 Date of Issue: 2023-11-02 Prepared By: Chris Liu / Project Engineer Date: 2023-11-02 Approved By: Ryan.CJ / EMC Manager Date: 2023-11-02 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230919R00501 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 38 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-11-02 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230919R00501 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 38 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................................ 4 1.1 Identification of Testing Laboratory ................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ...................................................................................................... 4 1.3 Laboratory Condition ........................................................................................................................................................... 4 1.4 Announcement ....................................................................................................................................................................... 4 2. Product Information .............................................................................................................................................................................. 5 2.1 Application Information ....................................................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................................................... 5 2.3 General Description of Equipment under Test (EUT)................................................................................................... 5 2.4 Technical Information........................................................................................................................................................... 6 3. Summary of Test Results .................................................................................................................................................................... 7 3.1 Test Standards ....................................................................................................................................................................... 7 3.2 Summary of Test Result ...................................................................................................................................................... 7 3.3 Uncertainty of Test ................................................................................................................................................................ 7 4. Test Configuration ................................................................................................................................................................................ 8 4.1 Environment Condition ........................................................................................................................................................ 8 4.2 Test Equipment List .............................................................................................................................................................. 8 4.3 Test Mode .............................................................................................................................................................................. 10 4.4 Test Auxiliary Equipment .................................................................................................................................................. 11 4.5 Test Setup ............................................................................................................................................................................. 12 5. Test Items .........................................................…

Text truncated - open the document above for the full version.

Model:17Air Radiated Emission (9 kHz -30MHz) Model:17Air Radiated Emission (30MHz-1GHz) Conducted Emission (AC Mains)