2A2NS-GY-ZJ053 IN 1 Fast Wireless Charger

德语 德语 法语法语 西班牙语 西班牙语 意大利语 意大利语 3 lN 1 Fast W ireless Charger Product appearance Product Introduction Aussehen des Produkts Einführung zum produkt. Apparence du produit Apariencia del producto Aspetto del prodotto 2025-12-30 Iight instructions COMP ATIBLE DEVICES PRODUCT SPECIFICA TION PACKING LIST 1. Magnetic wireless charging X12.User manual X1 3. C-TO-C quick charging cable X 1 Power On Standby Ice blue light flashing Ice blue light on Charging Démarrez la machine Articles de rechange Lumière bleu glace normalement éteint 30s Chargement La lumière bleu glace clignote Lumière bleu glace normalement éteint 30s Lumière bleu glace allumée INSTRUCCIONES DE ILUMINACIÓN Encendido Artículos de repuesto Las luces azules de hielo a menudo se encienden durante 30 segundos. Carga Las luces azules de hielo parpadean Las luces azules de hielo se encienden Accensione standby La luce blu di ghiaccio rimane accesa per 30 secondi e si spegne Ricarica lce luce blu lampeggiante La luce blu di ghiaccio rimane accesa per 30 secondi e si spegne Luce blu di ghiaccio Z J05常规(不含适配器）说明书 Z J05常规（不含适配器）说明书 尹 Kontrollleuchte für Kopfhörer W ärmeable- itungsloch Mobile Ladefläche Ladebereich für Kopfhörer Port Typ C lichtinstruktionen Eisblaue Lichter 30 Eisblaues Licht blinkt Eisblaues Licht Eisblaue Lichter 30 Einschalten Standby Aufladung 125g The ice blue light stays on for 30 seconds and goes out SAFETY NOTICE 1. Do not disassemble or throw the product into fire or water to avoid short circuit. 2. Do not use wireless charger in extremely hot, humid or corrosive environment. 3. Make sure there are no any metal, pop rings, credit cards or magnetic interference charges. 4. Keep out of reach of children and pets. 5. lf the charging station overheats and stops charging during use, please remove the charging device and try charging after cooling down. 6. Avoid dropping the product from high place. Ar ea di ricarica mobile Indicatore luminoso LED Foro di dissipazione del calore Area di ricarica delle cuffie Porta di tipo C Luz indicadora Agujero de disipación de calor Área de carga de auriculares Puerto tipo C Indic ateurs lumineux Trous de dissipation de chaleur Zone de charge du casque Port de type C Zone de charge du téléphone FAQ 1. lf you're experiencing interrupted or slow charging, check the following. (1) The back of your devices should not have any metal, pop sockets, or credit cards (2) Put the devices in the center of the charging surface (this lets the charging coil in your devices line up with the one inside the wireless charger). (3) Check whether the adapter is QC 3.0 fast charger. 2. lf you're failing to charge your device, please try out the following: (1)Please restart your cell phone and test with other Type-C charging cable. (2)Please check whether the indicator turns on or not. (3) Please check if the adapter is a QC3.0 fast charger (output: 12V/3A or15V/3A and above). 3.Charging slow. harging eficiency depends on the receiving power of your devices, and do not keep those apps keep running during charging. 4. The phone is charging intermittently, or the indicator light flashes. lf the charging current is not enough, please use a adapter with sufficient power 12V/3A or15V/3A above. 5. Charging fever. It is normal for the receiving coil or transmitter board to generate heat during wireless charging. lf the wireless charger is too hot, please take your devices off it, when the wireless charger is cooled down, please charge it again. 6.ne charger does not work. Do not put metal debris or magnetic cards on the charging area. lf the product does not work due to overheating. please take off the phone and charge it again when it is cooled down. 7. lf there are another problems, please contact our after-sales for solution. Note: To ensure safe and efficient function of 3 devices, you must use a 12V/3A or 15V/3A adapter and a fast charging cable (if you do not use the appropriate adapter and fast charging cable, the charger may not be able to charge your phone or may not be able to charge 3 devices simultaneously, and may even damage the charger). Phone Charging Area Earphones Charging Area W atch Charging Area 180° rotation T ype-C Port Heat dissipation hole Indic ate Light The ice blue light stays on for 30 seconds and goes out This 3-in-1 f ast wireless charger integrates wireless charging functions for mobile devices, phones, watches, TWS wireless earphones, and more. Suitable for multiple scenarios, a product can achieve multiple functions. This product is compatible with any mobile phone and headphones that meet the following conditions and comply with the Qi standard. The wireless charging function of the watch can charge Apple and Samsung watches. It has wireless charging function, low charging heat, stable performance, and absolute safety guarantee. Pr ovide power to the charger through 12V/3A,15V/3A adapters. Instructions Uhr Ladebereich (180° Drehung) Dieses 3-in-1- Schnellladegerät integriert das drahtlose Laden von mobilen Geräten, Handys, Uhren und drahtlosen TWS-Kopfhörern. Für mehrere Szenarien kann ein Produkt mehrere Funktionen realisieren. Dieses Produkt ist mit allen Handys und Kopfhörern kompatibel, die die folgenden Kriterien erfüllen und Qi-Standards erfüllen. Die drahtlose Ladefunktion der Uhr kann Apple- und Samsung-Uhren aufladen, mit drahtloser Ladefunktion, niedriger Ladehärme, stabiler Leistung und absoluter Sicherheit. Beschreibung V ersorgen Sie das Ladegerät durch 12V / 3A, 15V / 3A Adapter. Uhr Ladebereich (180° Drehung) Présentation du produit Ce char geur sans fil rapide 3 en 1 intègre des fonctionnalités telles que la charge sans fil pour les appareils mobiles, les téléphones portables, les montres, les écouteurs sans fil TWS et bien plus encore. Adapté à plusieurs scénarios, un produit peut réaliser plusieurs fonctions. Ce produit est compatible avec n'importe quel téléphone et casque qui répond aux conditions suivantes et qui est conforme à la norme Qi. La fonction de c…

Text truncated - open the document above for the full version.

Local Representative Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(7), of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2A2NS-GY-ZJ05 GY-ZJ05, ZJ05, GY-ZJ05-A, GY-ZJ05-S, GY- ZJ05-1, GY-ZJ05-2, GY-ZJ05-3 We hereby acknowledge as follows: i. both signees confirm that the point of contact accepts responsibility to act as a US- American Representative on behalf of the applicant ii. the point of contact provides the physical U.S. address and email as listed below iii. both parties maintain the requirements of this agreement for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. iv. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. US-American Point of Contact Applicant/Approval Holder Signature Date: 2026/1/13 Signature Date: 2026/1/13 Company Name: GLOCERTS TECHNOLOGY INC Guanyu(Dongguan) Intelligent Technology Co.,Ltd. FRN: 0036339737 0031164734 Contact Name: Huiying Fan ManFang Wu Address: 19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City, Guangdong, China Phone: (626) 588-8039 15815564997 Email: [email protected] [email protected]

Page 1 of 2 FCC ID: 2A2NS-GY-ZJ05 External photos Page 2 of 2 FCC ID: 2A2NS-GY-ZJ05

Label FCC ID : 2A2NS-GY-ZJ05

Page 1 of 3 FCC ID: 2A2NS-GY-ZJ05 Internal photos Phone coil Page 2 of 3 FCC ID: 2A2NS-GY-ZJ05 earPhone coil Page 3 of 3 FCC ID: 2A2NS-GY-ZJ05 . iWatch coil Samsung Watch coil

Page 1 of 16 Report No.: AiTSZ-251216006FW2 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name : 3 IN 1 Fast Wireless Charger Brand Name : N/A Model : GY-ZJ05 Series Model : ZJ05, GY-ZJ05-A, GY-ZJ05-S, GY-ZJ05-1, GY-ZJ05-2, GY-ZJ05-3 FCC ID : 2A2NS-GY-ZJ05 Applicant : Guanyu(Dongguan) Intelligent Technology Co.,Ltd Address : 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City, Guangdong, China Manufacturer : Guanyu(Dongguan) Intelligent Technology Co.,Ltd Address : 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City, Guangdong, China Standard(s) : FCC CFR 47 PART 1, § 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Receipt : Dec. 16, 2025 Date of Test : Dec. 16, 2025~ Dec. 22, 2025 Issued Date : Dec. 23, 2025 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Aalen.Ye Allen Wang Page 2 of 16 Report No.: AiTSZ-251216006FW2 Report Revise Record Report Version Issued Date Notes M0 Dec. 23, 2025 Initial Release Page 3 of 16 Report No.: AiTSZ-251216006FW2 Contents 1 GENERAL INFORMATION .......................................................................................................................................... 4 1.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 4 1.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2.1 DESCRIPTION OF THE TEST MODE ..................................................................................................................................... 6 2.2 SPECIAL ACCESSORIES ................................................................................................................................................... 6 2.3 EQUIPMENT LIST FOR THE TEST ....................................................................................................................................... 7 3 TEST CONDITIONS AND RESULTS .............................................................................................................................. 8 3.1 APPLICABLE STANDARD.................................................................................................................................................. 8 3.2 LIMIT ......................................................................................................................................................................... 8 3.3 TEST SETUP ................................................................................................................................................................. 8 3.4 MEASUREMENT PROCEDURE .......................................................................................................................................... 9 3.5 TEST RESULT OF E AND H FIELD STRENGTH ........................................................................................................................ 9 3.6 CONCLUSION ............................................................................................................................................................. 14 4 TEST SETUP PHOTOGRAPHS OF EUT ....................................................................................................................... 15 Page 4 of 16 Report No.: AiTSZ-251216006FW2 1 GENERAL INFORMATION 1.1 Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 25°C Relative Humidity: 55 % Air Pressure: 101 kPa 1.2 General Description of EUT Product Name: 3 IN 1 Fast Wireless Charger Model/Type reference: GY-ZJ05 Serial Model: ZJ05, GY-ZJ05-A, GY-ZJ05-S, GY-ZJ05-1, GY-ZJ05-2, GY-ZJ05-3 Power Supply: Input: 9V 3A, 12V3A, 15V 3A Phone Output:5W /7.5W/ 10W /MPP25W(Max) Earbuds Output: 3.0W(Max) Watch Output:2.5W(Max) Hardware Version: N/A Software Version: N/A Sample(s) Status: AiTSZ-251216006-1(Normal sample) AiTSZ-251216006-2(Engineer sample) Wireless Charger: Operation frequency: Coil1: For Phone: 110kHz-205kHz, 360kHz Coil2: For Earphone: 110kHz-205kHz Coil3: For iWatch: 300kHz-350kHz Coil4: For Samsung watch:110kHz-205kHz Modulation Technology: ASK Antenna Type: Loop coil antenna Antenna gain: 0dBi Remark: The above DUT's information was declared by manufacturer. For more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Page 5 of 16 Report No.: AiTSZ-251216006FW2 1.3 Test Facility Test Laboratory: Guangdong Asia Hongke…

Text truncated - open the document above for the full version.

Page 1 of 33 Report No.: AiTSZ-251216006FW1 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name : 3 IN 1 Fast Wireless Charger Brand Name : N/A Model : GY-ZJ05 Series Model : ZJ05, GY-ZJ05-A, GY-ZJ05-S, GY-ZJ05-1, GY-ZJ05-2, GY-ZJ05-3 FCC ID : 2A2NS-GY-ZJ05 Applicant : Guanyu(Dongguan) Intelligent Technology Co.,Ltd Address : 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City, Guangdong, China Manufacturer : Guanyu(Dongguan) Intelligent Technology Co.,Ltd Address : 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City, Guangdong, China Standard(s) : FCC CFR Title 47 Part 15 Subpart C Date of Receipt : Dec. 16, 2025 Date of Test : Dec. 16, 2025~ Dec. 22, 2025 Issued Date : Dec. 23, 2025 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Aalen.Ye Allen Wang Page 2 of 33 Report No.: AiTSZ-251216006FW1 Report Revise Record Report Version Issued Date Notes M0 Dec. 23, 2025 Initial Release Page 3 of 33 Report No.: AiTSZ-251216006FW1 Contents 1 TEST SUMMARY .................................................................................................................................................... 4 1.1 TEST STANDARDS ......................................................................................................................................................... 4 1.2 TEST SUMMARY ........................................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2 GENERAL INFORMATION ....................................................................................................................................... 6 2.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 6 2.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 6 2.3 DESCRIPTION OF THE TEST MODE ..................................................................................................................................... 7 2.4 SPECIAL ACCESSORIES ................................................................................................................................................... 7 2.5 EQUIPMENT LIST FOR THE TEST ....................................................................................................................................... 8 3 TEST CONDITIONS AND RESULTS ........................................................................................................................... 9 3.1 CONDUCTED EMISSIONS TEST ......................................................................................................................................... 9 3.2 RADIATED EMISSIONS .................................................................................................................................................. 12 3.3 20DB BANDWIDTH ..................................................................................................................................................... 24 3.4 ANTENNA REQUIREMENT ............................................................................................................................................. 27 4 TEST SETUP PHOTOGRAPHS OF EUT .................................................................................................................... 28 5 PHOTOS OF THE EUT ........................................................................................................................................... 29 Page 4 of 33 Report No.: AiTSZ-251216006FW1 1 TEST SUMMARY 1.1 Test Standards The tests were performed according to following standards: FCC Rules Part 15.207,15.209, 15.215(c) ANSI C63.10: 2020: American National Standard for Testing Unlicensed Wireless Devices 1.2 Test Summary Test Item Section in CFR 47 Test Result Electric Field Radiated Emissions FCC Part 15 C (Section15.209) PASS 20dB Bandwidth/99% Bandwidth FCC Part 15 C (Section15.215(c)) PASS AC Power Line Conducted Emission FCC Part 15 C (Section15.207) PASS Antenna Requirement FCC Part 15 C (Section15.203 PASS Page 5 of 33 Report No.: AiTSZ-251216006FW1 1.3 Test Facility Test Laboratory: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China The test facility is recognized, certified or accredited by the following organizations: FCC-Registration No.: 2519…

Text truncated - open the document above for the full version.

SPECIFICATIONFORAPPROVAL Specificationnumber HG2023082003 Effectivedate Customer ZhongliGuanda(Shenzhen)IntelligentTechnologyCo.,LTD Producttype A11Singlecoil12turnsL=20MM HongguiP/N43.5*0.8doubleslotwithhole12ringsbackroundwhiteglue CustomerP/N 【☑Neweditionissued,□versionrevised】【Thisspecificationcontains3pagesofcontents】 【 RoHSCompliantParts 】 AUTHOR CHECK APPROVE PengJianji AnfuHongguiElectronicsCo.,LTD ThisSPECIFICATIONFORAPPROVALmustbesignedandreturnedtothe customerwithinoneweekofreceipt.Overdueproductionshallberegardedas followingthestandardsofthisacknowledgement. Manufacturer: Address:Building 2, New Energy Industry Park, Yangmeiling North District, Zhouhu Town, Anfu County, Ji'an City Jiangxi Province SPECIFICATIONFORAPPROVAL Customer ZhongliGuanda(Shenzhen)Intelligent TechnologyCo.,LTD Customer P/N Honggui P/N 43.5*0.8doubleslotwithhole12ringsback roundwhiteglue Specification number HG2023082003 Edition 01 ◆BoundaryDimension (Unit：mm) A43.5±.0.5 B40.0±1.5 C15.0±0.5 D5.3 E22.0±2 F20.0±2 G3.0±1 H2.4±0.2 I 0.8±0.1 J8 1.Wirediameter:0.08*105Psilk-coveredself-adhesive copperwire 2.Numberofcoilswound：12TS 3.Whetherthestartandendlinescross:Yes 4.Wrapcoilwith8mmwidehi ghtemperaturetape (frontview)(sideview)(bottomview) 5.Thecoilandmagneticdiskmustbecentered 6.Discbackround42white glue Parameter LOSpecification TestconditionTestinstrument LO6.8±0.3μH100KHz/1V ■TH1816B ■TH1816BQ>30min100KHz/1V DCR<60mΩ@25°C■CH-502BC Operatingtemperature -40°C~125°C ◆Billofmaterials Serial s 1 MaterialsSpecificationSuppliers Notes 2 Magneticsheet 43.5*0.8Doubleslots withholes PC95Mn-Zn 3 Copperwire 0.08*105PSilk-coveredself-adhesivecopperwire 4 High-temperaturetape 8MMEco-friendlyadhesivetape 5 TinHightemperaturetinbar Thousandislandenvironmentaltin 6 Glue WhitegluesEco-friendlyadhesive 7 Adhesivebacking 42roundsofwhiteglue AUTHORCHECKAPPROVE PengJianji Operation Frequency100-300KHz Antenna TypeLoop coil antenna Antenna gain:0dBi We statement that All measurements were performed radiated and therefore additional antenna gain documentation is not required.

惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD SPECIFICATIONSSHEET CUSTOMER: 客户 DESCRIPTION: 品名描述 CUSTOMERP/N: 客户品名 PARTNUMBER: 制造商料号 DATEOFAPPLICATION: 提出日期 中利冠达 苹果手表线圈-8mm 2022-12-08 CLASSIFICATIONOFSPEC.PRESENTATION.(Ticktherelevantbox"√") oNewapplication新规格 √Newpartisaddedtoacceptedspecification新产品规格追加记录 oRevisionofacceptedspecification既存规格图面变更 ACCEPTANCESTAMP( ) APPROVALBY 承认 CHECKBY 审查 PREPAREBY 制作 ADDRESS:3rdFloor,No.181,Mingyue2ndRoad,ShiwanTown,BoluoCounty,Huizhoucity TELPHONE:0752-6668681 E-MAIL:[email protected] 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD HistoryForRevisedSpecification CUSTOMERP/N: 客户品名 中利冠达 PARTNUMBER: 制造商料号 Item 项次 DESCRIPTION(ContentOrReasonForChanged) 变更内容 Rev. 版本 CustRev. 客户版本 Date 日期 Revisor 修订者 1 InitialRelease(初版发行) A0 2022-12-08 陈骏 APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 晁子奇 陈骏 2022-12-08 1of3 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD Specification 规格内容 CUSTOMERP/N: 客户品名 中利冠达 PARTNUMBER: 制造商料号 1.DIMENSIONS():(Unit:mm) 单位（Unit）：毫米（mm） ABCDEF 21Max 14±0.57.5±0.58±11.5±0.5 2.8Max 1.软磁出线处开线槽。 2.磁铁尺寸φ7.5*2.2,磁力3000GS±150 APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 2022-12-08 2of3 Operation Frequency100-500KHz Antenna TypeLoop coil antenna Antenna gain:0dBi We statement that All measurements were performed radiated and therefore additional antenna gain documentation is not required. 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD Specification 规格内容 CUSTOMERP/N: 客户品名 中利冠达 PARTNUMBER: 制造商料号 2.WINDINGDETAILS(绕线详细说明) Coil1 圈数 Turns 线径 WireDia 绕线方式疏/密 Wdg.Type Spred/Close 绕线方向 Wdg.Direction 相交是/否 Intersect Yes/Not 14TS 0.08*24P热风绞线(HotAir strandedWire) 密绕（Close） 逆绕 是（Yes） 3.电气特性（ELECTRICALCHARACTERISTICS）: 温度TEMPERATURE:25±10,RELATIVEHUMIDITY:6510% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS Coil1 1.INDS-F 8.1±0.3 100kHz/VUC2906A 2.QS-F 20Min 100kHz/VUC2906A 3. DCRS-F 135Max 100kHz/VUC2906A APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 2022-12-08 3of3

惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD SPECIFICATIONSSHEET CUSTOMER: 客户 DESCRIPTION: 品名描述 CUSTOMERP/N: 客户品名 PARTNUMBER: 制造商料号 DATEOFAPPLICATION: 提出日期 中利冠达 ZLGD-A1-0322 2024-10-16 CLASSIFICATIONOFSPEC.PRESENTATION.(Ticktherelevantbox"√") oNewapplication新规格 √Newpartisaddedtoacceptedspecification新产品规格追加记录 oRevisionofacceptedspecification既存规格图面变更 ACCEPTANCESTAMP( ) APPROVALBY 承认 CHECKBY 审查 PREPAREBY 制作 ADDRESS:3rdFloor,No.181,Mingyue2ndRoad,ShiwanTown,BoluoCounty,Huizhoucity TELPHONE:0752-6668681 E-MAIL:[email protected] 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD HistoryForRevisedSpecification CUSTOMERP/N: 客户品名 中利冠达 PARTNUMBER: 制造商料号 ZLGD-A1-0322 Item 项次 DESCRIPTION(ContentOrReasonForChanged) 变更内容 Rev. 版本 CustRev. 客户版本 Date 日期 Revisor 修订者 1 InitialRelease(初版发行) A0 2024-10-16 陈骏 APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 晁子奇 陈骏 2024-5-4 1of3 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD Specification 规格内容 CUSTOMERP/N: 客户品名 中利冠达 PARTNUMBER: 制造商料号 ZLGD-A1-0322 1.DIMENSIONS( ):(Unit:mm) 单位（Unit）：毫米（mm）. ABCDEFGH 19.4±0.320.5±0.539.5±142.5±0.513±1 2±1 0.8±0.1 2.5max 1.背胶为白色双面胶。 2.线圈贴合位置居中。 APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 2024-10-16 2of3 Operation Frequency100-500KHz Antenna TypeLoop coil antenna Antenna gain:0dBi We statement that All measurements were performed radiated and therefore additional antenna gain documentation is not required. 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD Specification 规格内容 CUSTOMERP/N: 客户品名 中利冠达 PARTNUMBER: 制造商料号ZLGD-A1-0322 2.WINDINGDETAILS(绕线详细说明) Coil1 圈数 Turns 线径 WireDia 绕线方式疏/密 Wdg.Type Spred/Close 绕线方向 Wdg.Direction 相交是/否 Intersect Yes/Not 11TS 0.08*80P热风自粘线 密绕（Close） 逆绕 是（Yes） 温度TEMPERATURE:25±1 3.工作温度范围0°C至70°C 4.电气特性（ELECTRICAL CHARACTERISTICS）: 0,RELATIVEHUMIDITY:6510% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS Coil1 1. INDS-F100kHz/VUC2906A 2.QS-F100kHz/ 7.9uh±5% 60Min VUC2906A 3. DCRS-F100kHz/ 60mΩMax VUC2906A APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 2024-10-16 3of3

惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD SPECIFICATIONSSHEET CUSTOMER: 客户 DESCRIPTION: 品名描述 CUSTOMERP/N: 客户品名 PARTNUMBER: 制造商料号 DATEOFAPPLICATION: 提出日期 中利冠达 ZLGD-A1-0273 2024-7-9 CLASSIFICATIONOFSPEC.PRESENTATION.(Ticktherelevantbox"√") oNewapplication新规格 √Newpartisaddedtoacceptedspecification新产品规格追加记录 oRevisionofacceptedspecification既存规格图面变更 ACCEPTANCESTAMP( ) APPROVALBY 承认 CHECKBY 审查 PREPAREBY 制作 ADDRESS:3rdFloor,No.181,Mingyue2ndRoad,ShiwanTown,BoluoCounty,Huizhoucity TELPHONE:0752-6668681 E-MAIL:[email protected] 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD HistoryForRevisedSpecification CUSTOMERP/N: 客户品名 中利冠达 PARTNUMBER: 制造商料号 ZLGD-A1-0273 Item 项次 DESCRIPTION(ContentOrReasonForChanged) 变更内容 Rev. 版本 CustRev. 客户版本 Date 日期 Revisor 修订者 1 InitialRelease(初版发行) A0 2024-7-9 冯欣 APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 晁子奇 冯欣 2024-7-9 1of3 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD Specification 规格内容 CUSTOMERP/N: 客户品名 中利冠达 PARTNUMBER: 制造商料号 ZLGD-A1-0273 1.DIMENSIONS( ):(Unit:mm) 单位（Unit）：毫米（mm） ABCDEFG 21Max 14.5±17.5±0.511±12±1 2.6MAX 2.2±0.1 1.背胶为白色背胶，φ18.0。 2.磁铁规格：φ 7.5*2.2 ，磁场 3000GS。 3.软磁出线处开线槽。 4.该规格产品均用0.08*24P热风线（红色）。 APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 2024-7-9 2of3 Operation Frequency100-500KHz Antenna TypeLoop coil antenna Antenna gain:0dBi We statement that All measurements were performed radiated and therefore additional antenna gain documentation is not required. 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD Specification 规格内容 CUSTOMERP/N: 客户品名中利冠达 PARTNUMBER: 制造商料号 ZLGD-A1-0273 2.WINDINGDETAILS(绕线详细说明) Coil1 圈数 Turns 线径 WireDia 绕线方式疏/密 Wdg.Type Spred/Close 绕线方向 Wdg.Direction 相交是/否 Intersect Yes/Not 15TS 0.08*24P热风绞线(HotAir strandedWire) 密绕（Close） 逆绕 是（Yes） 3.电气特性（ELECTRICALCHARACTERISTICS）: 温度TEMPERATURE:25±10,RELATIVEHUMIDITY:6510% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS Coil1 1.INDS-F 10.5uH±0.3uH 100kHz/VUC2906A 2.QS-F 20Min 100kHz/VUC2906A 3. DCRS-F 135Max 100kHz/VUC2906A APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 2024-7-9 3of3

Page 1 of 1 FCC ID: 2A2NS-GY-ZJ05