2A2NS-GY-Z6DWireless Charger

GY-Z6D英文说明书，工反彩印 Product Appearance User Manual 31 N l Fast Wire less Charger 封面 (l .,.,, 还Chu,o1wa«hm,炉ffl<ally,函 12 w1,e1氐ch叩妇啦缸Pho氓 3匕EDictelligectlight @W设厄scha屯ea,包fo,TWSea中hoce (S No,-,1,pmat (6沪七沁九 7 Non-slipmat 8Prndccttag 9妇d,atochole Product Introduction Notice: To ensure charging 3 devices safely and efficiently, you must use 9V/2Aadapter and quick charge cable, if including ISW!ast charging phones, you must use9V/2.7Aor 12V/2A adapter and quick charge cable (if not use the appropriate adapter and quick charge cable, the charger may not charge phone fast, or may not charge 3 devices simultaneously, or may even damage the cha屯可） The3-in-1 wicelesscharger, a compact charging house, powe飞d的m only one outlet, can charge 3 devices simultaneously. When charge youc mobile phone, apple watches, and your AirPods 2 or AirPods Pro, just put them on, wireless charging will automatically start, all this wlll make your desk clean and tidy, and make your life easier. The charger is so space-saving designed can help you integrate your mobile phone intelligent and llfe very well, especially for Apple user. Besides, it is fashion that the light isso shining and has breathing effect showing the charging state Operation Steps 1. Connect the cha「gerto a 9V/2A,9V/2. 7 A or 12V/2A ada pte「througha Type-Cquick cha「gecable to switch on the power; 2. Put your phone on then charge; 3.Put the apple watch on and suck it up to charge (roll the watch band to minimize to charge better); 4. Plug your earphone on then charge; 识"""'"心“心 Fold able Design LED ligh t rnstructrons • Greenlightison: • Bluelightisbreathing: : Blue andGreenlightflash Standby mode or Wireless cha咽ngthe phone Foreign body is detected or the not charging the phone phone is misaligned (the phone charging will automatically stop ) Charging Schematic Diagram Cha,g;ng3Apple dev;ces ,;multaneously Vertically or ho「izontally Es I 6s I 5s r ch 钉 o at IS 2 P iw53 SS dd 00 pp AICAir Ple 囡 乙 Applicable Devices I.Smart Phone (!)Apple: iPhone 12,12 Pro,12 Pro Max,12 mini,SE,11,11 Pro,11 Pro Max, Xs,Xs Max,XR,X,8,8 Plus, @Samsung: Galaxy S: 20 SG,20+ SG,20 Ultra SG,10,10+, lOe,9,9+,B,B+,7,7 edge,6,6 edge, 6 edge+, 6 G9209,6 Active;Galaxy Note:10,lOe,10+,9,8,7,6,5; @LG: G2(VS980,Verizon ve「sion),G3,G6,G6+,G7,G7ThinQ,G7+ Thi nQ,GB,GB Th inQ,V30, V30+,V35,V40 ThinQ,V50, V50ThinQ, LG Lucid2 (VS870),LG Optimus F5 (As870),LG Optimus Vu 3,Spectrum 2,0ptimus G Pro,Optimus Vull,Optimus LTE 2,etc ©MOTOROLA: Droid Turbo,Droid Turbo2,Droid 5,Moto Maxx,Ultra M,Moto X Force @Huawei: P40 Pro, P30 Pro; Mate:30 SG,30 Pro SG,30,30 Pro, 30 RS,20 Pro,20 RS, RS, @Xiao mi: 10,10 Pro,9,9Pro,Mix 3,Mix 2s; Including other devices with wireless charging receiver built一in, other some devices need to add a wireless charging receiver (Note: All devices must meetthe Qi standard) 2.SmartWatch: Apple: iWatch Sl,S2,S3,S4,S5,S6,SE 3.Ea「phone: Apple: Ai rPods 2, Air Pods Pro; Product Specification Input: 9V/2A,9V/2.7Aorl2V/2A (must use 9V/2.7Aor 12V/2Awhen charging3 devices including 15W charging phone) Phone Output: 15W/10W/7.5W/5W Watch Output: 2.5W (Apple iWatch Sl,S2,S3,S4,S5,S6,SE) Earphone Output: 3W (TWS Earphone: AppleAirPods 2, Pro; and more) Input Interface: Type-C port Transmission Distance(Phone):'s8mm Conversion Rate(Phone):,>73% Prod uctSize:142X70Xl8. 7mm Accessories List Wireless Charger·1. Type-Cquick chargecabte·1. User manual'l Attention !.Please keep the charger away from water or other liquid; 2.11 you need to clean the charger,please make sure比isnot connected powersupply, 3.Using Environment temperature remains 0-45'C 4.Charging environment of smart phone will not be ,;;ss·c (,;;131'F) Answer questions 1.lf you're experiencing interrupted or slow charging, check the following: (1) The back of you「phoneshou Id not have any meta I, pop sockets, or credit cards (2) Put the phone in the center of the charging surf ace (this lets the charging coil in you「phone line up with the one inside the wireless charge门． (3) The wireless charging coil on Sony phones is located slightly below center (4) Phone cases should be no thicker than 5 mm for effective charging. (S) Check whether the adapter is QC3.0 fast cha「ger 2.lf you'refa小ngto charge your device, please try out the following (1) Please restart yourcell phone and test with other USB cable (2) Please check whetherthe indicator turns on or not. (3) Please check the Adapter is QC3.0 Quick Charge『(Output:9V/2A) or not, iPhone original adapter does not match the wireless charger. (4) Pleasecheckyou「Phonecase thickness(<=Smm). Metal ring or Magnetic Pad w仆Inot be available. 3.lf you're using the recommended wireless charger with the QC3.0Adapter and have removed any potential charging obstructions, but are still experiencing issues, try: (1) Replacing the cable connectingyour the wireless charger (2) Rebooting your phone. (3)Unplugthe adapter and reinsert (E: 芘 ROHS FCC Statement This device complies with part 15 FCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined …

Text truncated - open the document above for the full version.

Guanyu(Dongguan) Intelligent Technology Co.,Ltd Agent Authorization Company: Guanyu(Dongguan) Intelligent Technology Co.,Ltd Address: 1001 Room ,No#3 building ,No#36 Fuxing road, Chang’an town ,Dongguan City ,Guangdong China Product Name: Wireless Charger Trade Mark: Guany Model Number(s): GY-Z6D FCC ID: 2A2NS-GY-Z6D We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2022-02-20 Name: manfang wu Title: Manager Company: Guanyu(Dongguan) Intelligent Technology Co.,Ltd

Guanyu(Dongguan) Intelligent Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-02-20 Subject; Request for Confidentiality FCC ID: 2A2NS-GY-Z6D To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: manfang wu Title: Manager

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID:2A2NS-GY-Z6D This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 5 1. EXTERIOR PHOTOGRAPHS Fig. 1 Fig. 2 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID:2A2NS-GY-Z6D This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 5 Fig. 3 Fig. 4 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID:2A2NS-GY-Z6D This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 5 Fig. 5 Fig. 6 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID:2A2NS-GY-Z6D This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 5 Fig. 7 Fig. 8 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID:2A2NS-GY-Z6D This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 5 Fig. 9

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 Label and Location Size: L3.5cm*W2.0cm Label Location Wireless Charger Test Model: GY-Z6D FCC ID: 2A2NS-GY-Z6D

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 7 1. INTERIOR PHOTOGRAPHS Fig. 1 Fig. 2 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 7 Fig. 3 Fig. 4 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 7 Fig. 5 Fig. 6 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 7 Fig. 7 Fig. 8 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 7 Fig. 9 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 6 of 7 Fig. 10 Fig. 11 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 7 of 7 Fig. 12 Fig. 13 Coil Antenna Coil Antenna

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 10 RF Exposure Evaluation Report 1. Product Information FCC ID: 2A2NS-GY-Z6D Number of tested samples 2 Sample number 220211063A-1(Engineer sample), 220211063A-2(Normal sample) Product Name Wireless Charger Model Number GY-Z6D Power Supply Input: 9V2A,9V2.7A,12V2A Output: 15/10/7.5/5W for Phone, 2.5W for iWatch, 3.0W for Earbuds Modulation Type Continuous Wave Frequency Range 110.3~205.0KHz Antenna Type Coil Antenna Hardware version / Software version / Accessories / Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Mobile Device 2. Evaluation Method Per KDB 680106 D01 Section 3. RF Exposure Requirements; 1) Consumer wireless power transfer devices approved under Part 18 in some cases have to demonstrate compliance with RF exposure requirements. The potential for exposure must be assessed according to the operating configurations of the wireless system and the exposure conditions of users and bystanders. RF exposure must be evaluated with the client device(s) being charged by the primary at maximum output power. The RF exposure requirements must be determined in conjunction with the device operating characteristics, according to the mobile and portable exposure requirements in Section 2.1091 and Section 2.1093 of the rules. SAR and MPE limits do not cover the frequency range for wireless power transfer applications which operate below 100 kHz and 300 kHz respectively; therefore, RF exposure compliance needs to be determined with respect to 1.1307 (c) and (d) of the FCC rules. 2) Based on the design and implementation of the power transfer application, it must be clearly identified if mobile or portable RF exposure conditions apply. Devices that are installed to provide separation of at least 20 cm from users and bystanders may qualify for mobile exposure conditions. For some conditions where users and bystanders may be exposed at closer than 20 cm, section 2.1091(d) (4) of the rules may apply. 3) For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of 15 cm. E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. 4) Portable exposure conditions from 100 kHz to 6 GHz are determined with respect to SAR requirements. Existing SAR systems and test procedures are generally intended for measurements above 100 MHz. Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 10 While numerical modeling can be an alternative, the constraints of substantial computational resources at low frequencies could introduce further limitations. Under these circumstances, including operations below 100 kHz, the Commission may consider a combination of analytical analysis, field strength, radiated and conducted power measurements, in conjunction with some limited numerical modeling to assess compliance. 5) Depending on the operating frequency, existing SAR and MPE measurement procedures may be adapted to evaluate wireless power transfer devices for compliance with respect to mobile or portable exposure conditions. If the grantee or its test lab have any questions regarding RF exposure evaluation they should contact the FCC Laboratory with sufficient system operating configuration details to determine if RF exposure evaluation is necessary and, if required, how to apply specific test procedures. Below 100 MHz, when SAR testing is required and the device is operating at close proximity to persons, information on device design, implementation, operating configurations, exposure conditions of users and bystanders are needed to determine the evaluation and testing requirements. In addition, the influence of nearby objects may also need consideration according to the wireless power transfer system implementation; for example, the effects of placing the device, its coils or radiating elements on or near metallic surfaces 3. Evaluation Limit 3.1 Refer evaluation method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 680106 D01 RF Exposure Wireless Charging Apps v03: RF Exposure Considerations for Low Power Consumer Wireless Power Transfer Applications FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices FCC CFR 47 part 18.107:Indusial, Scientific, and Medical Equipment Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 10 3.2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30…

Text truncated - open the document above for the full version.

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D Report No.: LCS220211063AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 22 FCC TEST REPORT For Guanyu(Dongguan) Intelligent Technology Co.,Ltd Wireless Charger Test Model: GY-Z6D Prepared for : Guanyu(Dongguan) Intelligent Technology Co.,Ltd Address : 1001 Room ,No#3 building ,No#36 Fuxing road, Chang’an town ,Dongguan City ,Guangdong China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Baoan District, Shenzhen, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : February 14, 2022 Number of tested samples : 2 Serial number : 220211063A-1(Engineer sample), 220211063A-2(Normal sample) Date of Test : February 14, 2022 ~ February 17, 2022 Date of Report : February 18, 2022 Scan code to check authenticity Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D Report No.: LCS220211063AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 22 FCC TEST REPORT FCC CFR 47 PART 15C Report Reference No. ...................... : LCS220211063AEA Date Of Issue ....................................... : February 18, 2022 Testing Laboratory Name ................. : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ................................................ : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Baoan District, Shenzhen, China Testing Location/ Procedure ................ : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name .............................. : Guanyu(Dongguan) Intelligent Technology Co.,Ltd Address ................................................ : 1001 Room ,No#3 building ,No#36 Fuxing road, Chang’an town ,Dongguan City ,Guangdong China Test Specification Standard ............................................... : FCC CFR 47 PART 15C Test Report Form No. .......................... : LCSEMC-1.0 TRF Originator .................................... : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF .......................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ....................... : Wireless Charger Trade Mark .......................................... : Guany Test Model ........................................... : GY-Z6D Power Supply ...................................... : Input: 9V2A,9V2.7A,12V2A Output: 15/10/7.5/5W for Phone, 2.5W for iWatch, 3.0W for Earbuds Result ................................................ : Positive Compiled by: Supervised by: Approved by: Jack Liu/ Administrator Jin Wang/ Technique principal Gavin Liang/ Manager Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D Report No.: LCS220211063AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 22 FCC TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS220211063AEA February 18, 2022 Date of issue Test Model.............................. : GY-Z6D EUT......................................... : Wireless Charger Applicant............................... : Guanyu(Dongguan) Intelligent Technology Co.,Ltd Address.................................. : 1001 Room ,No#3 building ,No#36 Fuxing road, Chang’an town ,Dongguan City ,Guangdong China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Guanyu(Dongguan) Intelligent Technology Co.,Ltd Address................................... : 1001 Room ,No#3 building ,No#36 Fuxing road, Chang’an town ,Dongguan City ,Guangdong China Telephone............................... : / Fax.......................................... : / Factory................................... : / Address................................... : / Telephone............................... : / Fax.......................................... : / Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D Report No.: LCS220211063AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 22 Revision History Revision Issue Date Revision Content Revised By 000 February 18, 2022 Initial Issue Gavin Liang Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D Report No.: LCS220211063AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 22 TABLE OF CONTENTS 1. GENERAL INFORMATION ....................................................................................................... 6 1.1 Description of Device (EUT) .................................................................................................................. 6 1.2 Support equipment List ........................................................................................................................... 6 1.3 Externa…

Text truncated - open the document above for the full version.

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 2 Photographs of Test Setup Conducted Emission-AC adapter charge mode Radiated Emission below 30MHz-AC adapter charge mode Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2NS-GY-Z6D _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 2 Radiated Emission below 1GHz-AC adapter charge mode