2A2NS-L8Slim-Magnetic-Powerbank

- Guanyu(Dongguan) Intelligent Technology Co.,Ltd - Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/27/2024 U.S. Agent Designation Guanyu(Dongguan) Intelligent Technology Co.,Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2A2NS-L8): Name and company of U.S. agent: UUX GROUP INC Physical U.S. address of agent: 36 South 18th Avenue, Suite A Brighton, CO USA 80601 FRN of U.S. agent: 0033701590 Email address of U.S. agent: [email protected] UUX GROUP INC acknowledges their obligation to accept service of process on behalf of Guanyu(Dongguan) Intelligent Technology Co.,Ltd. Guanyu(Dongguan) Intelligent Technology Co.,Ltd with the FRN 0031164734 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature ManFang Wu Manager Guanyu(Dongguan) Intelligent Technology Co.,Ltd Signature Jack Fu Manager UUX GROUP INC 48_[model] US_Agent_2.911(d)(7) - U, V05

Page 1 of 4 FCC ID: 2A2NS-L8 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. External Photos Photo 1 Photo 2 Page 2 of 4 FCC ID: 2A2NS-L8 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 3 Photo 4 Page 3 of 4 FCC ID: 2A2NS-L8 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 5 Photo 6 Page 4 of 4 FCC ID: 2A2NS-L8 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Photo 7 ------End------

Label Size: L40mm * W20mm 1. The label is silk-screen on the sample Slim-Magnetic-Powerbank Model Name: L8 FCC ID: 2A2NS-L8 L W

Page 1 of 5 FCC ID: 2A2NS-L8 Internal Photos Photo 1 Photo 2 Page 2 of 5 FCC ID: 2A2NS-L8 Photo 3 Photo 4 Phone Page 3 of 5 FCC ID: 2A2NS-L8 Photo 5 Photo 6 Page 4 of 5 FCC ID: 2A2NS-L8 Photo 7 Photo 8 Page 5 of 5 FCC ID: 2A2NS-L8 Photo 9 Photo 10 ------End------

Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name : Slim-Magnetic-Powerbank Brand Name : N/A Model : L8 Series Model : N/A FCC ID : 2A2NS-L8 Applicant : Guanyu(Dongguan) Intelligent Technology Co.,Ltd Address : 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City, Guangdong, China Manufacturer : Guanyu(Dongguan) Intelligent Technology Co.,Ltd Address : 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City, Guangdong, China Standard(s) : FCC CFR 47 PART 1, § 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Receipt : July 19, 2024 Date of Test : July 19, 2024 ~ Aug.07, 2024 Issued Date : Aug.07, 2024 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Leon.yi Sean She Page 2 of 18 Report No.: AiTDG-240719015FW3 Report Revise Record Report Version Issued Date Notes M1 Aug.07, 2024 Initial Release Page 3 of 18 Report No.: AiTDG-240719015FW3 Contents 1 GENGENERAL INFORMATION ................................................................................................................................... 4 1.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 4 1.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2.1 DESCRIPTION OF THE TEST MODE ..................................................................................................................................... 6 2.2 SPECIAL ACCESSORIES ................................................................................................................................................... 6 2.3 EQUIPMENT LIST FOR THE TEST ....................................................................................................................................... 6 2.4 ANTENNA LOCATION(S) ................................................................................................................................................. 7 3 TEST CONDITIONS AND RESULTS .............................................................................................................................. 8 3.1 APPLICABLE STANDARD .................................................................................................................................................. 8 3.2 LIMIT ......................................................................................................................................................................... 8 3.3 TEST SETUP ................................................................................................................................................................. 8 3.4 MEASUREMENT PROCEDURE .......................................................................................................................................... 9 3.5 TEST RESULT OF E AND H FIELD STRENGTH ...................................................................................................................... 10 3.5.1 For mobile exposure condition: ......................................................................................................................... 10 3.5.2 For portable exposure condition: ...................................................................................................................... 11 3.6 EQUIPMENT APPROVAL CONSIDERATIONS ....................................................................................................................... 13 3.7 CONCLUSION ............................................................................................................................................................. 13 4 TEST SETUP PHOTOGRAPHS OF EUT ....................................................................................................................... 14 5 EXTERNAL PHOTOGRAPHS OF EUT ......................................................................................................................... 18 6 INTERNAL PHOTOGRAPHS OF EUT .......................................................................................................................... 18 Page 4 of 18 Report No.: AiTDG-240719015FW3 1 GENGENERAL INFORMATION 1.1 Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 25°C Relative Humidity: 55 % Air Pressure: 101 kPa 1.2 General Description of EUT Product Name: Slim-Magnetic-Powerbank Model/Type reference: L8 Power Supply: Input: 5V⎓3A/9V⎓2.22A/12V⎓1…

Text truncated - open the document above for the full version.

Page 1 of 24 Report No.: AiTDG-2407190151FW2 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. FCC TEST REPORT Client Information: Applicant: Guanyu(Dongguan) Intelligent Technology Co.,Ltd Applicant add.: 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City, Guangdong, China Manufacturer: Guanyu(Dongguan) Intelligent Technology Co.,Ltd Manufacturer add.: 402 Room, NO#801 Building, Zhen'an Middle Road, Changan Town, Dongguan City, Guangdong, China Product Information: Product Name: Slim-Magnetic-Powerbank Model No.: L8 Brand Name: N/A FCC ID: 2A2NS-L8 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Prepared By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Date of Receipt: July 19, 2024 Date of Test: July 19, 2024 ~ Aug.07, 2024 Date of Issue: Aug.07, 2024 Test Result: Pass This device described above has been tested by Guangdong Asia Hongke Test Technology Limited and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Note: This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited, this document may be altered or revised by Guangdong Asia Hongke Test Technology Limited, personal only, and shall be noted in the revision of the document. This test report must not be used by the client to claim product endorsement. Reviewed by: Approved by: Leon.yi Sean She Page 2 of 24 Report No.: AiTDG-2407190151FW2 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. 1 Contents Page COVER PAGE 1 CONTENTS ........................................................................................................................................................... 2 2 TEST SUMMARY .................................................................................................................................................. 5 2.1 STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................. 5 2.2 MEASUREMENT UNCERTAINTY ............................................................................................................................ 5 3 TEST FACILITY ..................................................................................................................................................... 6 3.1 DEVIATION FROM STANDARD ............................................................................................................................... 6 3.2 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................... 6 3.3 TEST LOCATION ................................................................................................................................................. 6 4 GENERAL INFORMATION ................................................................................................................................... 7 4.1 EUT TEST MODE ............................................................................................................................................... 8 4.2 DESCRIPTION OF TEST SETUP............................................................................................................................. 8 4.3 PERIPHERAL LIST ............................................................................................................................................... 9 4.4 EUT PERIPHERAL LIST ....................................................................................................................................... 9 5 EQUIPMENTS LIST FOR ALL TEST ITEMS ..................................................................................................... 10 6 CONDUCTED EMISSION TEST ......................................................................................................................... 11 6.1 CONDUCTED EMISSION MEASUREMENT ................................................................................................ 11 6.2 POWER LINE CONDUCTED EMISSION LIMITS ........................................................................................... 11 6.3 TEST PROCEDURE ...................................................................................................................................... 11 6.4 DEVIATION FROM TEST STANDARD ......................................................................................................... 11 6.5 TEST SETUP ................................................................................................................................................. 12 6.6 EUT OPERATING CONDITIONS .................................................................................................................. 12 6.7 TEST RESULT .................................................................................................................................................. 13 7 RADIATED EMISSION MEASUREMENT .......................................................................................................... 15 7.1 RADIATED EMISSION LIMITS .............................................................................................................................. 15 7.2 ANECHOIC CHAMBER TEST SETUP DIAGRAM ..................................................................................................... 16 7.3 TEST PROCEDURE .............................................…

Text truncated - open the document above for the full version.

FY-GZ001 深圳市立诚兴科技有限公司 承认书 客戶： CUSTOMER: SPECIFICATIONFORAPPROVAL 中利冠达（深圳）智能科技有限公司（KH008) 客戶料號： CUSTP/N: 内部料號： LCXP/N: 産品型號： DESC: 日期： DATE: 版本： Version: L8 LCX-KH008TX010 Φ21.7*39-0.08*72P-11TS-29-42.42LC-BJ 2024/4/30 A.0 制作 PREPAREDBY 审核 CHECKEDBY 批准 APPROVEDBY 客戶承认 CUSTOMERAPPROVE 杨文俊 2024/4/30 高应洪 2024/4/30 地址：深圳市龙华区观湖街道观城社区横坑村440号荣倡工业园7B栋四楼401 电话：13828741697 E-mail:[email protected] FY-GZ001 产品规格书SPECIFICATION 图纸编号：LCX-GCQP001168 版本 A/0 制作：杨文俊 2024/4/30 审核：高应洪 2024/4/30 页码：2/4客户代码：CUST KH008 规格型号 Φ21.5*39-0.08*72P-11TS-29-42.42LOC-BJ 客户料号：CUSTP/N L8 内部料号：INP/N LXC-KH008TX010 版本变更履历 VersionChangeHistory 版本 Rev 变更前 BeforeChange 变更后 AfterChange 更改日期 ChangeDate 批准 ApprovedBy A/0 新发行 -----2024/4/30 高应洪 物料清单 Billofmaterial 序号 物料名称 内部料号 物料规格 单位 备注 1 线圈 4.1 2 硬磁片 Φ 42.4*0.65 PCS1 3 硬磁片 Φ18*0.8 PCS1 4 Φ 41.5*0.03 PCS1 5 无铅锡条 Su99.3Cu0.7 6 黄胶 405 7PCS1 以下空白 NO name of material Internal part number Material specification unit dosage remark Coil Hard disk Hard disk Common double-sided tape Lead-free tin strip Yellow gum high-temperature tape Multi-strand enamelled wire 0.08*72P Material PN40 Material PN40 Width 5 x length 8 g g g Double slot without hole Double-sided back tape hand tear FY-GZ001 产品规格书SPECIFICATION 图纸编号：LCX-GCQP001168 版本 A/0 制作：杨文俊 2024/4/30 审核：高应洪 2024/4/30 页码：3/4客户代码：CUST KH008 规格型号 Φ21.7*39-0.08*72P-11TS-29-42.42LOC-BJ 客户料号：CUSTP/N L8 内部料号：INP/N LXC-KH008TX010 ABCDEFHH1H2------------ 39 -40 21.7 ±0.5 42.5+0/ -0.5 17.7 Ref 28.6- 30 3 ±1 0.7 ±0.1 0.65 ±0.05 1.6 Max ------------ 一、尺寸DIMENSION:(mm)绕线模具:Φ21.7线圈单重：4.1 二、原理图SCHEMATICDIAGRAM: 三、绕线参数WindingSpecification: 序号 NO 端子 TERMINAL 线径 WIRE 线材分解温度 Temperature 圈数 Turns 绕线方向 WindingDirection L1SF11TS 四、电气特性ELECTRICALCHARACTERISTIC：: 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±20% 序 号 磁片材质 Diskmaterial 电感量 LS 阻抗 DCR 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS 1 / 4.5uH±10%（单线圈） 58mΩ ±10% 100KHz/1.0VU2832 2 硬磁片 8.3±0.3UH（贴合磁片） 58mΩ ±10% 100KHz/1.0VU2832 Note: 1. Coil winding clockwise, as shown in Figure 1, coil can not scatter, loose, lead does not cross the wire out, stick 5mm wide warm tape under the inner wire. 2. Magnetic disc as shown in Figure 2, specifications: 42.4*0.65 double slot without hole 3. As shown in Figure 3, the coil is reversed. The inner wire is routed from the slot of the magnetic disc, and the outer wire is slightly connected to the magnetic disc. 4. The coil front magnetic disc is affixed with small magnetic disc in the middle, specification: 18*0.8, the reverse side is affixed with ordinary double-sided tape specification: 41.5*0.03, with hand tear. Multi-strand enamelled wire 0.08*72P 180-250 degrees clockwise Hard disk Single coil Fit magnetic disc FY-GZ001 产品规格书SPECIFICATION 图纸编号：LCX-GCQP001168 版本 A/0 制作：杨文俊 2024/4/30 审核：高应洪 2024/4/30 页码：4/4 客户代码：CUST KH008 规格型号 Φ21.7*39-0.08*72P-11TS-29-42.42LOC-BJ 客户料号：CUSTP/N L8 内部料号：INP/N LXC-KH008TX010

Page 1 of 2 FCC ID: 2A2NS-L8 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Test Setup Photo DCD Conduction Radiation (9KHz-30MHz) Page 2 of 2 FCC ID: 2A2NS-L8 Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. Radiation (30MHz-1000MHz) ------End------