2A2OH-E1830LTWS earbuds Maple wood

Designed by SCX design 68 bis boulevard Pereire 75017 Paris – France Designed by SCX design 68 bis boulevard Pereire 75017 Paris – France FRANCAIS – Manuel d’instruction SCX Design® Walnut Wood Wireless Earbuds and Charging Case Référence : E18 / 32495 Couleur : Noyer Veuillez lire attentivement le mode d'emploi avant d'utiliser le produit. Spécifications du produit : Poids total : 55.5g (3.8g x 2 écouteurs) Batterie (boîtier de chargement) : 1.11Wh - 300mAh Batterie (écouteur) : 0.148Wh to 0.1667Wh Entrée : 5V Distance de transmission : 10m Autonomie : 5h par charge Support : Android et système iOS Comprend 3 différentes tailles d’embouts. Le logo s'allume pendant le chargement ou lorsque les oreillettes sont retirées/insérées. Fonctions principales : Connexion : 1) Ouvrez la boitier de chargement et sortez les écouteurs. 2) Activez le menu de connexion sans fil de votre appareil et sélectionnez “E18.30L” pour vous connecter. Remarque : après l’appairage avec votre appareil, les écouteurs s'éteindront automatiquement si vous les placez dans le boîtier de chargement. Si vous les retirez du boîtier de chargement, ils s'allument et se couplent automatiquement avec le périphérique précédent. Réinitialisation de l’appairage : Si l’un des deux écouteurs ne se connecte pas automatiquement, suivez les instructions suivantes : 1. Eteignez la connexion sans fil sur votre smartphone 2. Placez les 2 oreillettes dans le boîtier de chargement tant que la LED rouge est toujours allumée. 3. Retirez les oreillettes du boîtier, elles vont alors s’appairer automatiquement. 3. Une fois appairées, une oreillette clignotera bleu tandis que l’autre clignotera alternativement rouge puis bleu en attendant d’être connectée à votre smartphone. Chargement du Produit : · Les écouteurs se chargent via le boîtier de chargement. · Lorsque la batterie du boîtier est faible, le voyant s’allume en rouge. · Le boîtier peut être rechargé via le port USB-C grâce au câble de chargement fournis. · Lorsque le boîtier est en charge, le voyant de charge s’allume en bleu. · Une fois la charge du boîtier complète, le voyant s’allume en vert. « Bouton multifonction » : Play/Pause : 1 x Tape Augmenter le volume : 2 x Tape sur l’oreillette droite Diminuer le volume : 2 x Tape sur l’oreillette gauche Chanson précédente : 1 pression de 1 seconde sur l’oreillette gauche Chanson suivante : 1 pression de 1 seconde sur l’oreillette droite Avertissement ! Ne placez pas et n'utilisez pas ce produit à proximité d'une source de chaleur élevée ou dans un environnement humide. Ne pas utiliser si l'équipement est endommagé. Utilisez uniquement les câbles fournis avec cet équipement. Gardez le produit hors de portée des enfants. Déclaration de la FCC : Cet appareil est conforme à la partie 15 des règles de la FCC. L'exploitation est soumise aux deux conditions suivantes : Cet appareil ne doit pas provoquer d'interférences nuisibles. Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un fonctionnement indésirable. Ne jamais stocker ou utiliser ce produit à des températures inférieures à 32 °F (0 °C) ou au-dessus de 115 °F (45 °C). boîtier de chargement port de chargement USB-C indicateur de batterie bouton multifonction embout intervertible avant arrière ENGLISH – Instruction Manual SCX Design® Walnut Wood Wireless Earbuds and Charging Case Reference: E18 / 32495 Color: Walnut Please read the instruction manual carefully before using the product. Product Specification: Total Weight: 55.5g ( 3.8g X 2 earbuds) Battery (charging box): 1.11Wh - 300mAh Battery (earbuds): 0.148Wh to 0.1667Wh Input: 5V Distance: 10m Play time: 5h per charge Support: Android and iOS System Includes 3 different sizes of eartips. The logo lights up while charging or when the earbuds are removed/inserted. Key functions: Connection: 1) Open the charging case and take the earbuds out. 2) Turn on the wireless pairing settings on your mobile device and select “E18.30L” Notes: after successfully pairing with your device, if you put the two earbuds in the charging case, they will automatically turn off; if you remove them from the charging case, they will turn on and pair automatically with the previous device. Reset the Pairing of the Two Earbuds: If one of the earbuds is not working properly, it may be necessary to reset the pairing of the earbuds. Please follow these instructions: 1. Turn off smartphone wireless function 2. Put both earbuds back into the charging case while the indicator still flashes red 3. Take both earbuds out from the charging case, they will pair with each other automatically. Once paired, one earbud will light blue while the other will alternatively flash blue and red until connected wirelessly. Charging of Product: · Earbuds charge via the charging box. · When the charging box’s battery is low, the LED indicator turns red. · The charging box can be recharged via the USB-C port thanks to the included cable. · When the box is charging, the LED indicator turns blue. · Once the charging is completed, the LED indicator turns green. Button Control: Play/Pause: 1 x Touch Volume +/-: 2 x Touch (R) to increase / 2 x Touch (L) to decrease Previous Song: 1 second Press (L) to return to previous song Next Song: 1 second Press (R) to skip to next song Warning! Do not place or use this product near a source of high heat or in a humid environment. Do not use if the equipment is damaged. Only use the cables that are supplied with this equipment. Keep the product out of reach of children. Using your phone while charging it can cause higher temperatures. Never Store or use this product in temperatures below 32°F (0°C) or above 115°F (45°C). charging box USB-C charging port battery LED indicator multifunction button eartip front back FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this …

Text truncated - open the document above for the full version.

Packaging:

SCX DESIGN Date: 03/18/2022 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2A2OH-E1830L To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou Branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with SCX DESIGN This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Caroline Vanderschooten Title: purchasing and marketing manager Signature: On behalf of Company: SCX DESIGN Telephone: +33.1.86.95.99.88 E-mail: [email protected]

SCX DESIGN To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: 2A2OH-E1830L LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Caroline Vanderschooten Title: purchasing and marketing manager Signature: On behalf of Company: SCX DESIGN Telephone: +33.1.86.95.99.88 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name SCX DESIGN Address 68 bis Boulevard Pereire, Paris 75017, France Grantee Code 2A2OH FCC ID 2A2OH-E1830L Authorized Contact Name Caroline Vanderschooten Contact Email [email protected] Contact Phone +33.1.86.95.99.88 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1)labeling the equipment with the exact FCC ID as specified in this application, (2)compliance statement labeling pursuant to the applicable rules, (3)compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1)the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2)the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3)the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 03/18/2022 Print Name: Caroline Vanderschooten Title: purchasing and marketing manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.0 Page: 1 of 6 Appendix External Photos for GZCR2112021552AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 6 EMC-ARF-02 Rev 1.0 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 6 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 6 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 5 of 6 EMC-ARF-02 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 6 of 6 EMC-ARF-02 Rev 1.0

SCX DESIGN Label placement To Federal Communication Commission Equipment Authorization Branch 7 435 Oakland Mills Road Columbia, MID 21046 For the following product, Model Name/Number: E18/32495 FCC ID: 2A2OH-E1830L The FCC ID is not affixed on the product mainbody, but described in the product user manual and the product package/case due to below reasons. Reasons： The product is too small and Irregular appearance, not suitable to put the label on it. Print Name: Caroline Vanderschooten Title: purchasing and marketing manager Signature: On behalf of Company: SCX DESIGN Telephone: +33.1.86.95.99.88 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.0 Page: 1 of 5 Appendix Internal Photos for GZCR2112021552AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 5 EMC-ARF-03 Rev 1.0 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 5 EMC-ARF-03 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 5 EMC-ARF-03 Rev 1.0 ANT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 5 of 5 EMC-ARF-03 Rev 1.0

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.0 Report No.: GZCR211202155201 Page: 1 of 86 FCC ID: 2A2OH-E1830L Kobe Jian EMC Laboratory Manager TEST REPORT Application No.: GZCR2112021552AT (SGS SZ No.: T52110320011EM) Applicant: SCX DESIGN Address of Applicant: 68 bis Boulevard Pereire 75017 Paris, France Manufacturer: SCX DESIGN Address of Manufacturer: 68 bis Boulevard Pereire 75017 Paris, France Equipment Under Test (EUT): EUT Name: TWS earbuds Maple wood Model No.: E18/32495 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2021-11-02 Date of Test: 2021-12-21 to 2022-01-07 Date of Issue: 2022-01-12 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202155201 Page: 2 of 86 Revision Record Version Chapter Date Modifier Remark 01 2022-01-12 Original Authorized for issue by: Curry Wu/Project Engineer Ricky Liu/Reviewer EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202155201 Page: 3 of 86 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions (Below 1GHz) ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions (Above 1GHz) ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. Remark: According to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for the left and right earbuds. Therefore, only the data of the right earbuds is kept in the report. EMC-TRF-01 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR211202155201 Page: 4 of 86 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 7 4.4 Test Location ...................................................................................................................................... 8 4.5 Test Facility ........................................................................................................................................ 8 4.6 Deviation from Standards ................................................................................................................... 9 4.7 Abnormalities from Standard Conditions ........................................................................................... 9 5 Equipment List ........................................................................................................................................ 10 6 Radio Spectrum Technical Requirement ............................................................................................. 14 6.1 Antenna Requirement ...................................................................................................................... 14 6.1.1 Test Requirement: ....................................................................................................................... 14 6.1.2 Conclusion ................................................................................................................................... 14 6.2 Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence................ 15 6.2.1 Test Requirement: ....................................................................................................................... 15 6.2.2 Conclusion ............................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.0 Page: 1 of 2 Appendix Test Setup Photo for GZCR2112021552AT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 2 EMC-ARF-04 Rev 1.0 Test Setup Photo Radiated Spurious Emissions (Below 1GHz) Radiated Spurious Emissions (Above 1GHz)