2A2PC-Q6MATEProjector

UserManual MINIProjector PowerSupply 1.Type-cinterface:supportsPD,QC,AFCfastchargingprotocol chargers/chargingtreasureswithoutputof12V/1.67Aormore,andpowers theprojector. 2.Theproduct'sTYPE-Cconnectorsupports12V/1.67Amobilepowerfor outsideuse.(Note:IfyouuseAporttoTYPE-CdatacableorCportto TYPE-Cdatacable,youneedthecorrespondingpowerinterface.) Note：Ifnotusingtheunitforalongerperiodoftime,unplugtheadaptorfrom thewalloutletandfromtheunit. UserInterface Aftertheprojectoristurnedon,thefollowingmaininterfacewillappearafter the2-5sstartupscreenflashes. WIFISetting ClickonWIFIonthehomepage,selecttheWIFInetwork,andenter thepasswordtoconnecttothenetwork. Wirelessscreen Makesureyourprojectorconnectsamenetworkwithyoursmartphone (phoneorAndroidphone)Clikwirelessscreenonhomepage,Filowtheguide tomakescreenmirroingwithyourphone/Androidphone. Specialreminder:Thesamescreenonthephonereferstotheprojectionof thesamescreenasthescreenplayedbythephone. Mobilescreenprojectionreferstovideosonmobileappsthatcanbepushed toprojectors.Mobilephonescanalsoplaygames,readnovels,chatand workwithoutaffectingeachother. Wiredscreen Clickonthewiredscreenonthehomepageandfollowtheinstructionsonthe projectortomakeitmirroryourPhone/Androidphone. Note:Pleaseusetheoriginaldatacableofyourphone,otherwiseitmaynot workproperly. OptionSettings: Inoptionsettings,youcanusein thesettingsinterface,youcan selectoptionsinthelanguage,set thelanguage,canrotatethe screen,sidecastorceilingtype deliveryandotherways,and softwaresystemupgrades. BTDevice Onthehomepage,clickSettings- Open"BTDevices"Enable Bluetooth,clickSearchforDevices andselectBluetoothSpeakeror BluetoothEarphoneforpairing. FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD CoveredEquipmentCertificationAttestationLetter 4/22/2026 NemkoNorthAmerica,Inc. 303RiverRoad Ottawa K1V1H2 Canada ATTN.:ReviewingEngineer FCCID:2A2PC-Q6MATE SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD(“theapplicant”)certifiesthatthe equipmentforwhichauthorizationissoughtisnot“covered”equipmentprohibitedfrom receivinganequipmentauthorizationpursuanttosection2.903oftheFCCrules. Note:Iftheequipmentforwhichtheapplicantseeksauthorizationisproducedby anyoftheentitiesidentifiedonthecurrentCoveredList,theapplicantshould includeanexplanationonwhytheequipmentisnot“covered”equipment. SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD(“theapplicant”)certifiesthat,as ofthedateofthefilingoftheapplication,theapplicantisnotidentifiedontheCovered Listasanentityproducing“covered”equipment. SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD(“theapplicant”)certifiesthatthe equipmentforwhichauthorizationissoughtdoesnotincludecybersecurityoranti-virus softwareproducedorprovidedbyKasperskyLab,Inc.oranyofitssuccessorsand assignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofits successorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886 andKDB986446D01CoveredEquipmentGuidancesectionB(2a). Signed: Printedname:HongwuLi Title:GeneralManager CompanyName:SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD Date:4/22/2026

SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD 4/23/2026 NemkoNorthAmerica,Inc. 303RiverRoad Ottawa,Ontario,Canada K1V1H2 REQUESTFORCONFIDENTIALITY-FCC FCCID:2A2PC-Q6MATE PursuanttoSections0.457(d)(1)(ii)and0.459oftheCommission’sRulesandFCCGuidance document726920,weherebyrequestconfidentialtreatmentofinformationaccompanyingthis applicationasoutlinedbelow: PERMANENTLONG-TERMCONFIDENTIALITY: Schematics BlockDiagrams TheoryofOperation Theaboveinformationcontainstradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthisinformationmightbeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors.TheApplicantunderstandsthatpursuanttoRule 0.457(d)(1)(ii),disclosureofthisApplicationandallaccompanyingmaterialswillnotbemadebefore thedateoftheGrantforthisApplication. Sincerely, Signed: Printedname:HongwuLi Title:GeneralManager

SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD ProductSimilarityDeclaration Productname:Projector Modelname:Q6Mate,Q6,Q6Pro,Q6Max,Q6Ultra,Q5,Q5Mate, Q5Max,Q5Ultra FCCID:2A2PC-Q6MATE We(SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD) herebystatethatallthemodelsareelectricalidenticalincluding thesamesoftwareparameterandhardwaredesign(circuitdesign, PCBLayout,RFmodule/circuit,antennatype(s)andantenna location,componentsonPCB,etc.,),samemechanicalstructure anddesign(includingproductenclosure,materials,etc.,),Onlythe modelnamesaredifferent. Signed: Printedname:HongwuLi CompanyName:SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD Date:April22,2026

FCCID:2A2PC-Q6MATE FCCID:2A2PC-Q6MATE FCCID:2A2PC-Q6MATE FCCID:2A2PC-Q6MATE

LabelandLabelLocation

FCCID:2A2PC-Q6MATE FCCID:2A2PC-Q6MATE FCCID:2A2PC-Q6MATE FCCID:2A2PC-Q6MATE

FCCTESTREPORT FCCID:2A2PC-Q6MATE Product: Projector ModelName: Q6Mate,Q6,Q6Pro,Q6Max,Q6Ultra,Q5,Q5Mate,Q5Max,Q5Ultra Brand : N/A ReportNo.:PTC26022812701E-FC05 Preparedfor SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD. 302,Building6,ZoneC,SouthBiantouIndustrialZone,DongfangCommunity,Songgang Street,Bao'anDistrict,Shenzhen Preparedby PreciseTesting&CertificationCo.,Ltd. Building1,No.6,TongxinRoad,DongchengStreet,Dongguan,Guangdong,China. ReportNo.:PTC26022812701E-FC05 Page2of7 TESTRESULTCERTIFICATION Applicant’s name :SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD. Address:302,Building6,ZoneC,SouthBiantouIndustrialZone,Dongfang Community,SonggangStreet,Bao'anDistrict,Shenzhen Manufacture's name :SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD. Address:302,Building6,ZoneC,SouthBiantouIndustrialZone,Dongfang Community,SonggangStreet,Bao'anDistrict,Shenzhen Productname:Projector Modelname:Q6Mate,Q6,Q6Pro,Q6Max,Q6Ultra,Q5,Q5Mate,Q5Max,Q5Ultra Testprocedure:FCCCFR47Part1.1307(b)(1) TestDate:March13,2026toApril01,2026 DateofIssue:April01,2026 TestResult:PASS ThisdevicedescribedabovehasbeentestedbyPTC,andthetestresultsshowthatthe equipmentundertest(EUT)isincompliancewiththeFCCrequirements.Anditisapplicableonly tothetestedsampleidentifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofPTC,this documentmaybealteredorrevisedbyPTC,personalonly,andshallbenotedintherevisionof thedocument. TestEngineer: Jackzhou/Engineer TechnicalManager: SimonPu/Manager ReportNo.:PTC26022812701E-FC05 Page3of7 Contents Page 2TESTSUMMARY...............................................................................................................................................4 3GENERALINFORMATION..............................................................................................................................5 3.1GENERALDESCRIPTIONOFE.U.T..........................................................................................................5 4RFEXPOSURE..................................................................................................................................................6 4.1REQUIREMENTS........................................................................................................................................6 4.2THEPROCEDURES/LIMIT........................................................................................................................6 4.3MPECALCULATIONMETHOD..................................................................................................................7 4.4TESTRESULT...........................................................................................................................................7 ReportNo.:PTC26022812701E-FC05 Page4of7 2TestSummary TestItemsTestRequirementResult MaximumPermissibleExposure (ExposureofHumanstoRFFields) FCCCFR47Part 1.1307(b)(1) PASS Remark: N/A:NotApplicable ReportNo.:PTC26022812701E-FC05 Page5of7 3GeneralInformation 3.1GeneralDescriptionofE.U.T. ProductName:Projector ModelName:Q6Mate AdditionalModel:Q6,Q6Pro,Q6Max,Q6Ultra,Q5,Q5Mate,Q5Max,Q5Ultra ModelsDifference:Onlythemodelnamesaredifferent. Specification : BluetoothBDR+EDR 802.11b/g/nHT20/HT40 802.11a/nHT20/HT40 OperationFrequency : 2402-2480MHzforBT 2412-2462MHzfor802.11b/g/n(HT20) 2422-2452MHzfor802.11n(HT40) 5GWifi:5180-5240MHz 5.8GWifi:5745-5825MHz NumberofChannel : 79channelsforBDR+EDR 11channelsfor802.11b/g/n(HT20) 7channelsfor802.11n(HT40) 4channelsfor802.11a/n205180-5240MHz 5channelsfor802.11a/n205745MHz~5825MHz 2channelsfor802.11n405190-5230MHz 2channelsfor802.11n405755MHz~5795MHz TypeofModulation : GFSK,Π/4-DQPSK,8DPSKForDSS DSSSwithDBPSK/DQPSK/CCKfor802.11b; OFDMwithBPSK/QPSK/16QAM/64QAMfor802.11g/n; OFDMwithBPSK/QPSK/16QAM/64QAMfor802.11g/n/a Antennainstallation : Ceramicantenna AntennaGain : 2.4GHz:2.71dBi 2.4GWIFI:2.95dBi WIFI5:5.40dBi Powersupply : Input:DC12V HardwareVersion : LCX105BT-X600-V1.3 SoftwareVersion : HC16D3100V10_2602280327 ReportNo.:PTC26022812701E-FC05 Page6of7 4RFExposure TestRequirement :FCCPart1.1307(b)(1) EvaluationMethod :KDB447498D01GeneralRFExposureGuidancev06 4.1Requirements Systemsoperatingundertheprovisionsofthissectionshallbeoperatedinamannerthatensuresthat thepublicisnotexposedtoradiofrequencyenergylevelsinexcesslimitformaximumpermissible exposure.Inaccordancewith47CFRFCCPart2SubpartJ,section2.1091thisdevicehasbeen definedasamobiledevicewherebyadistanceof0.2mnormallycanbemaintainedbetweentheuser andthedevice. 4.2Theprocedures/limit (A)LimitsforOccupational/ControlledExposure FrequencyRangeElectricFieldMagneticFieldPowerDensity(S)AveragingTime 0.3-3.06141.63(100)*6 3.0-301842/f4.89/f(900/f)*6 30-30061.40.1631.06 300-1500F/3006 1500-100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure FrequencyRangeElectricFieldMagneticFieldPowerDensity(S)AveragingTime 0.3-1.346141.63(100)*30 1.34-30824/f2.19/f(180/f)*30 30-30027.50.0730.230 300-1500F/150030 1500-100,0001.030 Note:f=frequencyinMHz;*Plane-waveequivalentpowerdensity ReportNo.:PTC26022812701E-FC05 Page7of7 4.3MPECalculationMethod E(V/m)＝ d GP30 PowerDensity:Pd(W/m²)＝ 377 2 E E ＝ Electricfield(V/m) P＝PeakRFoutputpower(W) G＝EUTAntennanumericgain(numeric) d＝Separationdistancebetweenradiatorandhumanbody(m) Theformulacanbechangedto Pd ＝ 2 377 30 d GP   θφ FromthepeakEUTRFoutputpower,theminimummobileseparationdistance,d=0.2m,aswellas thegainoftheusedantenna,theRFpowerdensitycanbeobtained 4.4TestResult Mode Antenna Gain (dbi) Antenna Gain (numeric) Max.Peak OutputPower (dBm) Tuneup tolerance (dBm) MaxTuneUp Power(mW) PowerDensity (mW/cm2) LimitofPower Density (mW/cm2) Result 2480(3DH5)2.711.87-2.29-2.29±10.7430190.00027641Pass 2412(11G)2.951.9713.7913.79±130.130060.01180851Pass 5785(11A)5.403.4710.1010.1±112.8824960.00889321Pass Conclusion ： 1.Calculateintheworst-casemode. 2.Max.TuneUpPowerisdeclaredbymanufacturer,andusedtocalculate. 3.BTandWLANcan'ttransmitsimultaneously. ******THEENDREPORT******

ReportNo.:PTC26022812701E-FC01 Page 1 of 89 FCCTESTREPORT FCCID:2A2PC-Q6MATE Product:Projector ModelName:Q6Mate,Q6,Q6Pro,Q6Max,Q6Ultra,Q5,Q5Mate,Q5Max,Q5Ultra Brand:N/A ReportNo.:PTC26022812701E-FC01 Preparedfor SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD. 302,Building6,ZoneC,SouthBiantouIndustrialZone,DongfangCommunity,Songgang Street,Bao'anDistrict,Shenzhen Preparedby PreciseTesting&CertificationCo.,Ltd. Building1,No.6,TongxinRoad,DongchengStreet,Dongguan,Guangdong,China ReportNo.:PTC26022812701E-FC01 Page 2 of 89 1TESTRESULTCERTIFICATION Applicant’sname:SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD. Address:302,Building6,ZoneC,SouthBiantouIndustrialZone,Dongfang Community,SonggangStreet,Bao'anDistrict,Shenzhen Manufacture's name :SHENZHENLIANJIXINGTECHNOLOLGYCO.,LTD. Address:302,Building6,ZoneC,SouthBiantouIndustrialZone,Dongfang Community,SonggangStreet,Bao'anDistrict,Shenzhen Productname:Projector Modelname:Q6Mate,Q6,Q6Pro,Q6Max,Q6Ultra,Q5,Q5Mate,Q5Max,Q5Ultra Standards:FCCCFR47Part15Section15.247 Testprocedure:ANSIC63.10-2020 TestDate:March13,2026toApril01,2026 DateofIssue:April01,2026 TestResult:Pass ThisdevicedescribedabovehasbeentestedbyPTC,andthetestresultsshowthatthe equipmentundertest(EUT)isincompliancewiththeFCCrequirements.Anditisapplicable onlytothetestedsampleidentifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofPTC,this documentmaybealteredorrevisedbyPTC,personalonly,andshallbenotedintherevision ofthedocument. TestEngineer: Jackzhou/Engineer TechnicalManager: SimonPu/Manager ReportNo.:PTC26022812701E-FC01 Page 3 of 89 Contents Page 1TESTRESULTCERTIFICATION...............................................................................................................................2 2TESTSUMMARY..........................................................................................................................................................5 3TESTFACILITY.............................................................................................................................................................5 4GENERALINFORMATION..........................................................................................................................................6 4.1GENERALDESCRIPTIONOFE.U.T.....................................................................................................................6 4.2TESTMODE.........................................................................................................................................................7 5EQUIPMENTDURINGTEST......................................................................................................................................9 5.1EQUIPMENTSLIST...............................................................................................................................................9 5.2MEASUREMENTUNCERTAINTY.........................................................................................................................12 5.3DESCRIPTIONOFSUPPORTUNITS...................................................................................................................13 6CONDUCTEDEMISSION..........................................................................................................................................14 6.1E.U.T.OPERATION............................................................................................................................................14 6.2EUTSETUP.......................................................................................................................................................14 6.3TESTSET-UP(BLOCKDIAGRAMOFCONFIGURATION).................................................................................15 6.4MEASUREMENTPROCEDURE:...........................................................................................................................15 6.5CONDUCTEDEMISSIONLIMIT...........................................................................................................................15 6.6MEASUREMENTDESCRIPTION..........................................................................................................................15 6.7CONDUCTEDEMISSIONTESTRESULT.............................................................................................................15 7RADIATEDSPURIOUSEMISSIONS......................................................................................................................18 7.1EUTOPERATION...............................................................................................................................................18 7.2TESTSETUP......................................................................................................................................................19 7.3SPECTRUMANALYZERSETUP..........................................................................................................................21 7.4TESTPROCEDURE.............................................................................................................................................22 7.5SUMMARYOFTESTRESULTS...........................................................................................................................23 8MAXIMUMPEAKOUTPUTPOWERTEST............................................................................................................30 8.1TESTSTANDARDANDLIMIT..............................................................................................................................30 8.2TESTSETUP......................................................................................................................................................30 8.3TESTPROCEDURE.............................................................................................................................................30 8.4TESTDATA...............................................................…

Text truncated - open the document above for the full version.

ReportNo.:PTC26022812701E-FC01 Page 56 of 89 13100kHzBandwidthofFrequencyBandEdgeRequirement 13.1TestStandardandLimit TestStandard FCCPart15CSection15.247(d) TestLimit inany100kHzbandwidthoutsidethefrequencybandsinwhichthe spreadspectrumintentionalradiatorinoperating,theradiofrequency powerthatisproducedbytheintentionalradiatorshallbeatleast20dB belowthatinthe100kHzbandwidthwithinthebandthatcontainsthe highestlevelofthedesiredpower,Inaddition,radiatedemissionswhich fallintherestrictedbands,asdefinedin§15.205(a),mustalsocomply withtheradiatedemissionlimitsspecifiedin15.209(a). 13.2TestSetup 13.3TestProcedure TheEUTmusthaveitshopping/Non-hoppingfunctionenabled.Usingthefollowingspectrum analyzersetting: 1.SettheRBW=100kHz. 2.SettheVBW=300kHz. 3.Sweeptime=autocouple. 4.Detectorfunction=peak. 5.Tracemode=maxhold. 6.Allowtracetofullystabilize. ReportNo.:PTC26022812701E-FC01 Page 57 of 89 13.4TestData TestModeAntennaChNameFrequency[MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH5Ant1Low2402-6.32-42.88≤-26.32PASS DH5Ant1High2480-4.74-42.18≤-24.74PASS DH5Ant1LowHop_2402-7.09-42.89≤-27.09PASS DH5Ant1HighHop_2480-4.57-42.29≤-24.57PASS 2DH5Ant1Low2402-9.55-42.67≤-29.55PASS 2DH5Ant1High2480-6.17-42.65≤-26.17PASS 2DH5Ant1LowHop_2402-6.70-43.26≤-26.7PASS 2DH5Ant1HighHop_2480-4.35-41.92≤-24.35PASS 3DH5Ant1Low2402-7.37-42.4≤-27.37PASS 3DH5Ant1High2480-4.73-42.04≤-24.73PASS 3DH5Ant1LowHop_2402-9.60-41.66≤-29.6PASS 3DH5Ant1HighHop_2480-4.38-41.87≤-24.38PASS TestItem:BandedgeTestMode:CHLow~CHHigh TestVoltage:DC12VTemperature:24.5°C TestResult:PASSHumidity:55%RH ReportNo.:PTC26022812701E-FC01 Page 58 of 89 TestGraphs: DH5-Ant1-2402-PASS DH5-Ant1-2480-PASS DH5-Ant1-Hop_2402-PASS ReportNo.:PTC26022812701E-FC01 Page 59 of 89 DH5-Ant1-Hop_2480-PASS 2DH5-Ant1-2402-PASS ReportNo.:PTC26022812701E-FC01 Page 60 of 89 2DH5-Ant1-2480-PASS 2DH5-Ant1-Hop_2402-PASS ReportNo.:PTC26022812701E-FC01 Page 61 of 89 2DH5-Ant1-Hop_2480-PASS 3DH5-Ant1-2402-PASS ReportNo.:PTC26022812701E-FC01 Page 62 of 89 3DH5-Ant1-2480-PASS 3DH5-Ant1-Hop_2402-PASS ReportNo.:PTC26022812701E-FC01 Page 63 of 89 3DH5-Ant1-Hop_2480-PASS ReportNo.:PTC26022812701E-FC01 Page 64 of 89 ConductedEmissionMethod TestResult TestModeAntennaFrequency[MHz] FreqRange [MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH5Ant124020~Reference-6.25-6.25---PASS DH5Ant1240230~1000-6.25-54.03≤-26.25PASS DH5Ant124021000~26500-6.25-42.27≤-26.25PASS DH5Ant124410~Reference-5.71-5.71---PASS DH5Ant1244130~1000-5.71-54.99≤-25.71PASS DH5Ant124411000~26500-5.71-42.77≤-25.71PASS DH5Ant124800~Reference-5.28-5.28---PASS DH5Ant1248030~1000-5.28-54.29≤-25.28PASS DH5Ant124801000~26500-5.28-42.56≤-25.28PASS 2DH5Ant124020~Reference-10.75-10.75---PASS 2DH5Ant1240230~1000-10.75-55.12≤-30.75PASS 2DH5Ant124021000~26500-10.75-42.64≤-30.75PASS 2DH5Ant124410~Reference-6.66-6.66---PASS 2DH5Ant1244130~1000-6.66-52.92≤-26.66PASS 2DH5Ant124411000~26500-6.66-42.14≤-26.66PASS 2DH5Ant124800~Reference-9.22-9.22---PASS 2DH5Ant1248030~1000-9.22-54.63≤-29.22PASS 2DH5Ant124801000~26500-9.22-42.92≤-29.22PASS 3DH5Ant124020~Reference-7.12-7.12---PASS 3DH5Ant1240230~1000-7.12-54.07≤-27.12PASS 3DH5Ant124021000~26500-7.12-43.19≤-27.12PASS 3DH5Ant124410~Reference-8.31-8.31---PASS 3DH5Ant1244130~1000-8.31-53.83≤-28.31PASS 3DH5Ant124411000~26500-8.31-42.45≤-28.31PASS 3DH5Ant124800~Reference-8.08-8.08---PASS 3DH5Ant1248030~1000-8.08-55.38≤-28.08PASS 3DH5Ant124801000~26500-8.08-42.47≤-28.08PASS ReportNo.:PTC26022812701E-FC01 Page 65 of 89 TestGraphs: DH5-Ant1-2402-0~Reference-PASS DH5-Ant1-2402-30~1000-PASS DH5-Ant1-2402-1000~26500-PASS ReportNo.:PTC26022812701E-FC01 Page 66 of 89 DH5-Ant1-2441-0~Reference-PASS DH5-Ant1-2441-30~1000-PASS ReportNo.:PTC26022812701E-FC01 Page 67 of 89 DH5-Ant1-2441-1000~26500-PASS DH5-Ant1-2480-0~Reference-PASS ReportNo.:PTC26022812701E-FC01 Page 68 of 89 DH5-Ant1-2480-30~1000-PASS DH5-Ant1-2480-1000~26500-PASS ReportNo.:PTC26022812701E-FC01 Page 69 of 89 2DH5-Ant1-2402-0~Reference-PASS 2DH5-Ant1-2402-30~1000-PASS ReportNo.:PTC26022812701E-FC01 Page 70 of 89 2DH5-Ant1-2402-1000~26500-PASS 2DH5-Ant1-2441-0~Reference-PASS ReportNo.:PTC26022812701E-FC01 Page 71 of 89 2DH5-Ant1-2441-30~1000-PASS 2DH5-Ant1-2441-1000~26500-PASS ReportNo.:PTC26022812701E-FC01 Page 72 of 89 2DH5-Ant1-2480-0~Reference-PASS 2DH5-Ant1-2480-30~1000-PASS ReportNo.:PTC26022812701E-FC01 Page 73 of 89 2DH5-Ant1-2480-1000~26500-PASS 3DH5-Ant1-2402-0~Reference-PASS ReportNo.:PTC26022812701E-FC01 Page 74 of 89 3DH5-Ant1-2402-30~1000-PASS 3DH5-Ant1-2402-1000~26500-PASS ReportNo.:PTC26022812701E-FC01 Page 75 of 89 3DH5-Ant1-2441-0~Reference-PASS 3DH5-Ant1-2441-30~1000-PASS ReportNo.:PTC26022812701E-FC01 Page 76 of 89 3DH5-Ant1-2441-1000~26500-PASS 3DH5-Ant1-2480-0~Reference-PASS ReportNo.:PTC26022812701E-FC01 Page 77 of 89 3DH5-Ant1-2480-30~1000-PASS 3DH5-Ant1-2480-1000~26500-PASS ReportNo.:PTC26022812701E-FC01 Page 78 of 89 ReportNo.:PTC26022812701E-FC01 Page 79 of 89 14AntennaRequirement 14.1TestStandardandRequirement TestStandard FCCPart15Section15.203/247(c) Requirement 1)15.203requirement: Anintentionalradiatorshallbedesignedtoensurethatnoantennaotherthan thatfurnishedbytheresponsiblepartyshallbeusedwiththedevice.The useofapermanentlyattachedantennaorofanantennathatusesaunique couplingtotheintentionalradiator,themanufacturermaydesigntheunitso thatabrokenantennacanbereplacedbytheuser,buttheuseofastandard antennajackorelectricalconnectorisprohibited. 2)15.247(c)(1)(i)requirement: Systemsoperatinginthe2400-2483.5MHzbandthatisusedexclusivelyfor fixed.Point-to-pointoperationsmayemploytransmittingantennaswith directionalgaingreaterthan6dBiprovidedthemaximumconductedoutput poweroftheintentionalradiatorisreducedby1dBforevery3dBthatthe directionalgainoftheantennaexceeds6dBi. 14.2AntennaConnectedConstruction TheantennaisCeramicantennawhichpermanentlyattached,andthebestcasegainofthe antennais2.71dBi.Itcomplieswiththestandardrequirement. ReportNo.:PTC26022812701E-FC01 Page 80 of 89 15APPENDIXI--TESTSETUPPHOTOGRAPH Condu…

Text truncated - open the document above for the full version.

承 認 書 SPECIFICATION FOR APPROVAL 客戶名稱 CUSTOMER ： 客戶料號 CUSTOMER’S P/N ： 料號 PART NUMBER ： WAN3216F245W36 規格 DESCRIPTION ： Chip Antenna 3216 M-Ant 2.45G Type 36 版本 VERSION ： V2.5 日期 ISSUE DATE ： 2022/01/05 客 戶 承 認 CUSTOMER APPROVED 工 程 部 R&D CENTER 承 認 APPROVAL 確 認 CHECKED 製 作 DRAWN Ray Tennyson Snow 萬誠科技股份有限公司 OneWave Electronic Co., Ltd. 112台北市北投區立功街151號1樓 1F, No. 151, Li Gong Street, Beitou District, Taipei City 112, Taiwan 電話: (02) 2898-2220 TEL: +886 2 2898-2220 傳真: (02) 2898-5055 FAX: +886 2 2898-5055 ONEWAVE TECHNOLOGY CO., LTD. 2/11 3216 Chip antenna For Bluetooth / WLAN Applications Dimension (mm) L 3.23 ± 0.20 W 1.66 ± 0.20 T 1.23 ± 0.20 P/N: WAN3216F245W36 ONEWAVE TECHNOLOGY CO., LTD. 3/11 Part Number Information WAN 3216 F 245 W 36 A B C D E F A Product Series Antenna B Dimension L x W 3.2X1.6mm (+-0.2mm) C Material High K material D Working Frequency 2.4 ~ 2.5GHz E Feeding mode Monopole & Single Feeding F Antenna type Type = 36 1. Electrical Specification Remark : Bandwidth & Peak Gain was measured under evaluation board of next page Specification Part Number WAN3216F245W36 Central Frequency 2450 MHz Bandwidth 100 (Min.) MHz Return Loss -6.5 (Max) dB Peak Gain 2.71 dBi Impedance 50 Ohm Operating Temperature -40～+110 °C Maximum Power 4 W Resistance to Soldering Heats 10 ( @ 260°C) sec. Polarization Linear Azimuth Beamwidth Omni-directional Termination Cu / Sn (Leadless) ONEWAVE TECHNOLOGY CO., LTD. 6/11 3. Measurement Results Return Loss ONEWAVE TECHNOLOGY CO., LTD. 7/11 Radiation Pattern Efficiency Peak Gain Directivity 2400MHz 55.21 % 1.45 dBi 5.32 dBi 2450MHz 66.45 % 2.71 dBi 5.21 dBi 2500MHz 57.53 % 1.98 dBi 5.29 dBi Chamber Coordinate System X Z Y ONEWAVE TECHNOLOGY CO., LTD. 8/11 4.Reliability and Test Condictions ITEM REQUIREMENTS TEST CONDITION Solderability 1. Wetting shall exceed 90% coverage 2. No visible mechanical damage Pre-heating temperature:150°C/60sec. Solder temperature:230±5°C Duration:4±1sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin Solder heat Resistance 1. No visible mechanical damage 2. Central Freq. change :within ± 6% 10 ± 0.5 sec. 60 sec . . T E M P ( °C ) 150 °C 2 6 0 °C Pre-heating temperature:150°C/60sec. Solder temperature:260±5°C Duration:10±0.5sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin Component Adhesion (Push test) 1. No visible mechanical damage The device should be reflow soldered(230±5°C for 10sec.) to a tinned copper substrate A dynometer force gauge should be applied the side of the component. The device must with-ST-F 0.5 Kg without failure of the termination attached to component. Component Adhesion (Pull test) 1. No visible mechanical damage Insert 10cm wire into the remaining open eye bend ,the ends of even wire lengths upward and wind together. Terminal shall not be remarkably damaged. Thermal shock 1. No visible mechanical damage 2. Central Freq. change :within ±6% Phase Temperature(°C) Time(min) 1 +110±5°C 30±3 2 Room Temperature Within 3sec 3 -40±2°C 30±3 4 Room Temperature Within 3sec +110°C=>30±3min -40°C=>30±3min Test cycle:10 cycles The chip shall be stabilized at normal condition for 2~3 hours before measuring. Resistance to High Temperature 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature: +110±5°C Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Resistance to Low Temperature 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature:-40±5°C Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Humidity 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature: 40±2°C Humidity: 90% to 95% RH Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. 4±1 sec. 60sec TEMP (°C) 150°C 230°C ONEWAVE TECHNOLOGY CO., LTD. 9/11 5.Soldering and Mounting Mildly activated rosin fluxes are preferred. The minimum amount of solder can lead to damage from the stresses caused by the difference in coefficients of expansion between solder, chip and substrate. The terminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. Recommended temperature profiles for re-flow soldering in Figure 1. Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must be employed the following precautions are recommended. ‧Preheat circuit and products to 150°C ‧Never contact the ceramic with the iron tip ‧Use a 20 watt soldering iron with tip diameter of 1.0mm ‧280°C tip temperature (max) ‧1.0mm tip diameter (max) ‧Limit soldering time to 3 sec. SOLDERING COOLING NATURAL PRE-HEATING TEMPERATURE(°C) 60~120 s 10s max. 30~60s 250~260 230 180 150 TIME(sec.) Reflow Soldering SOLDERING COOLING NATURAL PRE-HEATING TEMPERATURE(°C) within 3s Gradual cooling 150 TIME(sec.) Iron Soldering Over 60s 350 300 ONEWAVE TECHNOLOGY CO., LTD. 10/11 6.Packaging Information ◆ Tape Specification: W Ao Bo Ko P F E D D1 Po P2 t 8.0 ±0.30 1.80 ±0.05 3.51 ±0.10 1.59 ±0.10 4.00 ±0.05 3.50 ±0.05 1.75 ±0.10 1.50 ±0.10 0.00 ±0.10 4.00 ±0.10 2.00 ±0.05 0.25 ±0.05 ◆ Reel Specification: (7’’, Φ180 mm) Tape Width(mm) A(mm) B(mm) C(mm) D(mm) Chip/Reel(pcs) 8 9.0±0.5 60±2 13.5±0.5 178±2 3000 ONEWAVE TECHNOLOGY CO., LTD. 11/11 7.Storage and Transportation Information Storage Conditions To maintain the solderability of terminal electrodes: 1. Temperature an…

Text truncated - open the document above for the full version.