2A2T9-BCST35Barcode scanner

User Guide BCST-35 Barcode Scanner English · Deutsch· 日本語 · Français · Italiano· Español FCC Note This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Users, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC's RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter. Battery Safety Warning: This product contains a built-in rechargeable lithium battery. Please observe the following safety precautions: do not dismantle, hit, crush, or expose the battery to fire. If the battery experiences severe swelling, discontinue use immediately. Avoid placing the battery in high-temperature environments, and do not use it if it has been immersed in water. During transportation, do not mix the battery with metallic objects. Batteriesicherheitshinweis: Dieses Produkt enthält einen eingebauten wiederaufladbaren Lithium-Akku. Bitte beachten Sie die folgenden Sicherheitsvorkehrungen: Zerlegen Sie den Akku nicht, schlagen Sie ihn nicht, zerquetschen Sie ihn nicht und setzen Sie ihn nicht Feuer aus. Bei starkem Aufblähen des Akkus verwenden Sie ihn bitte sofort nicht mehr. Vermeiden Sie es, den Akku in heißen Umgebungen zu platzieren, und verwenden Sie ihn nicht, wenn er in Wasser getaucht wurde. Mischen Sie den Akku während des Transports nicht mit metallischen Gegenständen. バッテリー安全警告： この製品には、内蔵の充電式リチウムバッテリーが含まれています。以下の安全上の注意事項にご注意ください： バッテリーを分解したり、打ったり、押し潰したり、火にさらしたりしないでください。バッテリーが重度の膨張 を経験した場合は、直ちに使用を中止してください。バッテリーを高温環境に置かないでください。水に浸した場 合は使用しないでください。輸送中は、バッテリーを金属の物と混ぜないでください。 Avertissement de sécurité de la batterie: Ce produit contient une batterie lithium-ion rechargeable intégrée. Veuillez observer les précautions de sécurité suivantes : ne pas démonter, frapper, écraser ou exposer la batterie au feu. En cas de gonflement important de la batterie, cessez immédiatement toute utilisation. Évitez de placer la batterie dans des environnements à haute température et ne l'utilisez pas si elle a été immergée dans l'eau. Pendant le transport, ne mélangez pas la batterie avec des objets métalliques. Avviso di sicurezza della batteria: Questo prodotto contiene una batteria al litio ricaricabile incorporata. Si prega di osservare le seguenti precauzioni di sicurezza: non smontare, colpire, schiacciare o esporre la batteria al fuoco. Se la batteria presenta un grave rigonfiamento, interromperne immediatamente l'uso. Evitare di posizionare la batteria in ambienti ad alta temperatura e non utilizzarla se è stata immersa nell'acqua. Durante il trasporto, non mescolare la batteria con oggetti metallici. Advertencia de seguridad de la batería: Este producto contiene una batería de litio recargable incorporada. Por favor, observe las siguientes precauciones de seguridad: no desmonte, golpee, aplaste o exponga la batería al fuego. Si la batería experimenta hinchazón severa, interrumpa su uso inmediatamente. Evite colocar la batería en ambientes de alta temperatura y no la utilice si ha estado sumergida en agua. Durante el transporte, no mezcle la batería con objetos metálicos. 电池安全警示： 本产品内置可充电锂电池，请遵守以下安全注意事项：禁止拆解、撞击、挤压或投入火中。如出现严重鼓胀，请勿继 续使用。请勿至于高温环境中。电池浸水后禁止使用！请勿将电池与金属物品一起运输！ EU Declaration of Conformity Inateck Co., Ltd. hereby declares that this device complies with the Directive2014/53/EU. A copy of the Declaration of Conformity can be accessed from https://www.inateck.de/pages/inateck- euro-compliance. Europe F&M Technology GmbH Tel: +49 341 5199 8410 (Working day 8 AM - 4 PM CET) Fax: +49 341 5199 8413 Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland NorthAmerica Inateck Technology Inc. Tel: +1 (909) 698 7018 (Working day 9 AM - 5 PM PST) Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA 日本 Inateck株式会社 電話番号：+81 06 7500 3304 〒547-0014 大阪府大阪市平野区長吉川辺3丁目10番11号 Manufacturer Shenzhen Inateck Technology Co., Ltd. Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China Email: [email protected] Postal code: 518129 ServiceCenter F&MTechnologyGmbH Fraunhoferstraße 7, 04178 Leipzig, Deutschland Tel: +49 341 5199 8410 Email: [email protected] Postal code: 04178 InateckTechnology(UK)Ltd. 95 High Street, Office B, Great Missenden, United Kingdom, HP16 0AL Tel: +44 20 3239 9869 For Product and Battery 胶装 尺寸：160*90mm 材质：封面封底125g铜版纸过哑胶 其他100g双胶纸（也可参考以往材质 要求）

ShenzhenInateckTechnologyCo.,Ltd. 2.911(d)(5)(i)EquipmentTypeAttestationv1.2 Section2.911(d)(5)(i)Certification–EquipmentType Companyname:ShenzhenInateckTechnologyCo.,Ltd. Address:Rm.2507,Bldg.11,TianAnCloudPark,BantianStreet,LonggangDistrict,Shenzhen, China ProductName:Barcodescanner FCCID:2A2T9-BCST35 Model(s):BCST-35 2.911(d)(5)(i)EquipmentType We,ShenzhenInateckTechnologyCo.,Ltd.(“theapplicant”)certifythattheequipmentforwhich authorizationissoughtthroughcertificationisnot:  Prohibitedfromreceivinganequipmentauthorizationpursuantto§2.903;oftheFCCrules.  Identifiedasanequipmenttypeinthe“CoveredList” NOTE1 Yourssincerely, Name:FretHuangDate:2024.8.26 TitleandCompanyname:Manager/ShenzhenInateckTechnologyCo.,Ltd. NOTE1 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ShenzhenInateckTechnologyCo.,Ltd. 2.911(d)(5)(ii)ApplicantAttestationv1.3 Section2.911(d)(5)(ii)Certification–Applicant(CoveredList) Companyname:ShenzhenInateckTechnologyCo.,Ltd. Address:Rm.2507,Bldg.11,TianAnCloudPark,BantianStreet,LonggangDistrict,Shenzhen, China ProductName:Barcodescanner FCCID:2A2T9-BCST35 Model(s):BCST-35 2.911(d)(5)(ii)Applicantfiling We,ShenzhenInateckTechnologyCo.,Ltd.(“theapplicant”)certifythat,asofthedateofthefilingof theapplication,theapplicantisnotidentified NOTE1 onthe“CoveredList” NOTE2 ,established pursuantto§1.50002ofthischapter,asanentityproducingcoveredcommunicationsequipment. Yourssincerely, Name:FretHuangDate:2024.8.26 TitleandCompanyname:Manager/ShenzhenInateckTechnologyCo.,Ltd. NOTE1 Deleteoptionnotapplicabletothisapplication. NOTE2 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Inateck Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.4 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Inateck Technology Co., Ltd. Address:Rm. 2507, Bldg. 11, TianAn Cloud Park, Bantian Street, Longgang District, Shenzhen, China Product Name:Barcode scanner FCC ID: 2A2T9-BCST35 Model(s): BCST-35 2.911(d)(7) USA Designated Agent for Service of Process We, Shenzhen Inateck Technology Co., Ltd. (“the applicant”) designate [Stone Trading Limited] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Stone Trading Limited USA Address: 6547 N Academy Blvd #2266, Colorado Springs, CO 80918, United States FRN Number: 0033401936 Contact Name: Dongmei Fang Telephone No: +12134573118 Email: [email protected] Applicant Company name:Shenzhen Inateck Technology Co., Ltd. Address:Rm. 2507, Bldg. 11, TianAn Cloud Park, Bantian Street, Longgang District, Shenzhen, China Grantee FRN Number：0031248057 FCC Grantee Code:2A2T9 Contact Name:Fret Huang Telephone No:0755-23484029 Email:[email protected] Signature: Title: Manager Signature: Title:Manager Shenzhen Inateck Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.4 Date: 2024.8.26 Date: 2024.8.26 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

ShenzhenInateckTechnologyCo.,Ltd. AgentAuthorization Company:ShenzhenInateckTechnologyCo.,Ltd. Address:Rm.2507,Bldg.11,TianAnCloudPark,BantianStreet,LonggangDistrict, Shenzhen,China ProductName:Barcodescanner ModelNumber(s):BCST-35 ProductDescription:Barcodescanner WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown. Signature:Date:2024.8.26 Name:FretHuang Title:Manager Company:ShenzhenInateckTechnologyCo.,Ltd.

ShenzhenInateckTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:2024.8.26 Subject;RequestforConfidentiality FCCID:2A2T9-BCST35 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram OperationalDescription Tune-upProcedure Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:FretHuang Title:Manager

EUTPHOTO(ExternalPhotos) TestMode:BCST-35 ※※※※※ENDOFREPORT※※※※※

Labelandlabellocation FCCIDLABEL: High:2cm Wide:3cm LabelLocation: Model:BCST-35 FCCID:2A2T9-BCST35

EUT PHOTO(Internal Photos) Test Mode: BCST-35 ※※※※※END OF REPORT※※※※※ BT ANT

FCCID:2A2T9-BCST35 RFExposureEvaluation AccordingtoKDB447498D01GeneralRFExposureGuidancev06andpart2.1093, UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures,standalone 1-gheadorbodyand10-gextremitySARevaluationforgeneralpopulationexposure conditions,bymeasurementornumericalsimulation,isnotrequiredwhenthe correspondingSARTestExclusionThresholdcondition(s),listedbelow,is(are)satisfied. For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-gSARtest exclusionthresholdsaredeterminedbythefollowing: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]*[√f (GHz) ]≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where f (GHz) istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation Theresultisroundedtoonedecimalplaceforcomparison Here, ForBLE Mode Frequency (MHz) Power (dBm) Power (mW) Min. distance(mm) Calc. thresholds limit GFSK2440-0.9740.8050.24993.0 Conclusion: 1.[(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparation distance,mm)]*[√f(GHz)]<3.0. 2.SARTestExclusionThresholdsis3.0forseparationdistance5mm.Therefore,SAR testisnotrequired.

Index: 1. Reliability Testing 2. Specification 3. S Parameter Test Data 4. Antenna Radiation Pattern ================================================== 1. Reliability Testing Test Item Procedure Requirement 1. Visual inspection and Dimension Check Applicable methods using x5 magnification follow specification 2. Rapid Changing of Temperature -40 ̊C (30minutes) to 80 ̊C (30minutes); 24 cycles After 2 hours recovery: 1. no visible damage 2. bandwidth tolerance < ±5% 3. Damp Heat 24 hours at 60 ̊C; 90 ~ 95% RH After 2 hours recovery: 1. no visible damage 2. bandwidth tolerance < ±5% 4. Endurance 24 hours at 80 ̊C After 2 hours recovery: 1. no visible damage 2. bandwidth tolerance < ±5% 5. Connector Pull Strength Test >= 1.0 Kg Hold 2~3S: 1. no visible damage 2. bandwidth tolerance < ±5% 2. Specification A. Electrical Characteristics S.W.R.( Tested in PC ) <= 2.0 @ 2400~2500 MHz Typical Antenna Gain 3.5dBi Impedance 50 Ohm B. Material Material of Radiator CU Connector Type NA C. Environmental Operation Temperature - 30 ̊C ~ + 85 ̊C Storage Temperature - 30 ̊C ~ + 85 ̊C 3. S.W .R. T esting Result 4. Antenna Radiation Pattern Testing Equipment Specification: Antenna Anechoic Chamber Dimension: 8 x 4 x 4 m Quite Zone: 600mm @1 GHz Isolation: >100dB @ 1 MHz ~ 10 GHz Testing Equipment: Agilent 5071B Received Antenna: 0.7 ~ 6.0 GHz for Gain Calibration Double Ridged Horn Antenna

ProjectNo.:ZKT-2408069408E Page 1 of 41 FCCTESTREPORT FCCID:2A2T9-BCST35 ReportNumber. .................................. :ZKT-2408069408E DateofTest ....................................................... :Aug.06,2024toAug.13,2024 Dateofissue.........................................:Aug.13,2024 Totalnumberofpages.......................... 41 TestResult .......................................... :PASS TestingLaboratory............................: ShenzhenZKTTechnologyCo.,Ltd. Address...............................................: 1/F,No.101,BuildingB,No.6,TangweiCommunityIndustrial Avenue,FuhaiStreet,Bao'anDistrict,Shenzhen,China Applicant'sname ............................. : ShenzhenInateckTechnologyCo.,Ltd. Address...............................................: Rm.2507,Bldg.11,TianAnCloudPark,BantianStreet,Longgang District,Shenzhen,China Manufacturer'sname......................: ShenzhenInateckTechnologyCo.,Ltd. Address ............................................... : Rm.2507,Bldg.11,TianAnCloudPark,BantianStreet,Longgang District,Shenzhen,China Testspecification: Standard ................................................ : FCCCFRTitle47Part15SubpartCSection15.247 ANSIC63.10:2013 Testprocedure.....................................: / Non-standardtestmethod................:N/A TestReportFormNo. ....................... : / TestReportForm(s)Originator.....: ZKTTesting MasterTRF........................................: Dated:2020-01-06 ThisdevicedescribedabovehasbeentestedbyZKT,andthetestresultsshowthattheequipmentunder test(EUT)isincompliancewiththeFCCrequirements.Anditisapplicableonlytothetestedsample identifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofZKT,thisdocumentmay bealteredorrevisedbyZKT,personalonly,andshallbenotedintherevisionofthedocument. Productname.....................................:Barcodescanner Trademark...........................................:Inateck Model/Typereference......................:BCST-35 Ratings .................................................. : Input:5V500mA Batterycapacity:DC3.65V,2600mAh,9.49Wh ProjectNo.:ZKT-2408069408E Page 2 of 41 Testingprocedureandtestinglocation: TestingLaboratory.......................................: ShenzhenZKTTechnologyCo.,Ltd. Address............................................................:1/F,No.101,BuildingB,No.6,TangweiCommunity IndustrialAvenue,FuhaiStreet,Bao'anDistrict, Shenzhen,China JimLiu Testedby(name+signature).......................: JacksonFang Reviewer(name+signature) ....................... : LakeXie Approved(name+signature).......................: ProjectNo.:ZKT-2408069408E Page 3 of 41 TableofContents Page 1.VERSION....................................................................................................................5 2.SUMMARYOFTESTRESULTS...............................................................................6 2.1TESTFACILITY.................................................................................................................7 2.2MEASUREMENTUNCERTAINTY....................................................................................7 3.GENERALINFORMATION........................................................................................8 3.1GENERALDESCRIPTIONOFEUT.................................................................................8 3.2DESCRIPTIONOFTESTMODES....................................................................................9 3.3BLOCKDIGRAMSHOWINGTHECONFIGURATIONOFSYSTEMTESTED............10 3.4DESCRIPTIONOFSUPPORTUNITS(CONDUCTEDMODE)......................................10 3.5EQUIPMENTSLISTFORALLTESTITEMS.................................................................11 4.EMCEMISSIONTEST.............................................................................................13 4.1CONDUCTEDEMISSIONMEASUREMENT..................................................................13 4.1.1POWERLINECONDUCTEDEMISSIONLimits...................................................13 4.1.2TESTPROCEDURE...............................................................................................13 4.1.3DEVIATIONFROMTESTSTANDARD..................................................................13 4.1.4TESTSETUP...........................................................................................................14 4.1.5EUTOPERATINGCONDITIONS...........................................................................14 4.2.1RADIATEDEMISSIONLIMITS...............................................................................17 4.2.2TESTPROCEDURE...............................................................................................18 4.2.3DEVIATIONFROMTESTSTANDARD..................................................................18 4.2.4TESTSETUP...........................................................................................................18 4.2.5EUTOPERATINGCONDITIONS...........................................................................19 5.RADIATEDBANDEMISSIONMEASUREMENT.....................................................24 5.1TESTREQUIREMENT:..............................................................................................24 5.2TESTPROCEDURE..................................................................................................24 5.3DEVIATIONFROMTESTSTANDARD.....................................................................24 5.4TESTSETUP..............................................................................................................25 5.5EUTOPERATINGCONDITIONS..............................................................................25 5.6TESTRESULT...........................................................................................................26 6.POWERSPECTRALDENSITYTEST......................................................................27 6.1APPLIEDPROCEDURES/LIMIT............................................................…

Text truncated - open the document above for the full version.

EUTTESTPHOTO TestMode:BCST-35