2A2UK-JJT-C693 in 1 wireless charger

JJT-C69 3 in 1 wireless charger FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Rev 1/26/2023 Dongguan Jiajiatong Plastic Mould Co. , Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-06-02 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID:2A2UK-JJT-C69 Dongguan Jiajiatong Plastic Mould Co. , Ltd. certifies that the equipment for which authorization is sought is not“covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Dongguan Jiajiatong Plastic Mould Co. , Ltd. certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Li Enping) Rev 1/26/2023 Dongguan Jiajiatong Plastic Mould Co. , Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-06-02 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID:2A2UK-JJT-C69 Dongguan Jiajiatong Plastic Mould Co. , Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Li Enping)

Dongguan Jiajiatong Plastic Mould Co. , Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 2, 2026 Subject; Request for Confidentiality FCC ID:2A2UK-JJT-C69 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description FCC Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Li Enping Title: Manager

Dongguan Jiajiatong Plastic Mould Co. , Ltd. Product Similarity Declaration Product name: 3 in 1 wireless charger Model name: JJT-C69, C69,C69-1,JJT-C69,JJT-C69-1 FCC ID:2A2UK-JJT-C69 We ( Dongguan Jiajiatong Plastic Mould Co. , Ltd.) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and color. Sincerely yours, Applicant Signature Printed Name: Li Enping Title:Manager Address: No. 10, Qiaojiao Middle Road,Pingshan 188 Industrial Zone, Tangxia Town,Dongguan City, Guangdong Province,China Tel.: 18925207585 Email: [email protected]

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Dongguan Jiajiatong Plastic Mould Co. , Ltd. Date：2026-06-02 Product Model Number: JJT-C69, C69,C69-1,JJT-C69,JJT-C69-1 FCC ID:2A2UK-JJT-C69 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out byQAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Li Enping Contact Listed on FCC Wesbite Title: Manager Email: [email protected] On behalf of: Dongguan Jiajiatong Plastic Mould Co. , Ltd.

Page 1 of 6 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China FCC ID:2A2UK-JJT-C69 External Photos Page 2 of 6 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Page 3 of 6 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Label&location Page 4 of 6 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Page 5 of 6 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Page 6 of 6 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Label&location

FCC ID LABELING AND LOCATION FCC ID Label 3 in 1 wireless charger Model NO.: JJT-C69 Input: Type-C: 15V/3A Wireless Output1: Phone 5W/7.5W/10W/15W/25W Wireless Output2: Earphone 5W; Wireless Output3: Watch 1~3W FCC ID: 2A2UK-JJT-C69 SIZE：3*3cm FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Page 1 of 5 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China FCC ID:2A2UK-JJT-C69 Internal Photos Page 2 of 5 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Phone Coil ANT Page 3 of 5 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Watch Coil ANT Page 4 of 5 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Page 5 of 5 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Earphone Coil ANT

ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26019600E1-2 SZNTT-TR832-0Tel:0755-27889935Web:http://www.ntt-testing.comPage1of15 MPEREPORT 3in1wirelesscharger MODELNo.:JJT-C69 FCCID:2A2UK-JJT-C69 REPORTNO.:SZNTT26019600E1-2 ISSUEDATE:May.27,2026 Preparedfor DongguanJiajiatongPlasticMouldCo.,Ltd. No.10,QiaojiaoMiddleRoad,Pingshan188IndustrialZone,Tangxia Town,DongguanCity,GuangdongProvince,China Preparedby ShenzhenNTTTestingTechnologyCo.,Ltd. 1B,Building2,FactoryBuilding&103,Building3,FactoryBuilding,Dayang IndustrialPark,No.4,IndustrialAvenue,TangweiCommunity,FuhaiSub-district, Bao'anDistrict,ShenzhenCity,Guangdong,China ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26019600E1-2 SZNTT-TR832-0Tel:0755-27889935Web:http://www.ntt-testing.comPage2of15 TABLEOFCONTENT TestReportDescriptionPage 1.SUMMARYOFTESTRESULT.....................................................................................................4 2.GENERALINFORMATION............................................................................................................5 2.1.DESCRIPTIONOFDEVICE(EUT).................................................................................................................................5 2.2.TESTSETUP.................................................................................................................................................................6 2.3.DESCRIPTIONOFTESTFACILITY.................................................................................................................................7 2.4.MEASUREMENTUNCERTAINTY....................................................................................................................................7 3.MEASURINGDEVICEANDTESTEQUIPMENT......................................................................8 3.1.FORMPEMEASUREMENT..........................................................................................................................................8 4.RFEXPOSURE................................................................................................................................9 4.1.MEASURINGSTANDARD...............................................................................................................................................9 4.2.REQUIMENTS................................................................................................................................................................9 4.3.TESTCONFIGURATIO..................................................................................................................................................10 4.4.LIMITS.........................................................................................................................................................................11 4.5.MEASURINGRESULTS................................................................................................................................................12 5.PHOTOGRAPHSOFTESTSETUP...........................................................................................15 ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26019600E1-2 SZNTT-TR832-0Tel:0755-27889935Web:http://www.ntt-testing.comPage3of15 TESTREPORTDESCRIPTION Applicant:DongguanJiajiatongPlasticMouldCo.,Ltd. Address: No.10,QiaojiaoMiddleRoad,Pingshan188IndustrialZone,Tangxia Town,DongguanCity,GuangdongProvince,China Manufacturer:DongguanJiajiatongPlasticMouldCo.,Ltd. Address: No.10,QiaojiaoMiddleRoad,Pingshan188IndustrialZone,Tangxia Town,DongguanCity,GuangdongProvince,China EUT: 3in1wirelesscharger ModelName:JJT-C69 Trademark:/ MeasurementProcedureUsed: FCCPart1(1.1310)andPart2(2.1091) KDB680106D01WirelessPowerTransferv04 ThedevicedescribedaboveistestedbyShenzhenNTTTestingTechnologyCo.,Ltd.todetermine themaximumemissionlevelsemanatingfromthedeviceandtheseverelevelsofthedevicecan endureanditsperformancecriterion.Themeasurementresultsarecontainedinthistestreportand ShenzhenNTTTestingTechnologyCo.,Ltd.isassumedfullofresponsibilityfortheaccuracyand completenessofthesemeasurements.Also,thisreportshowsthattheEUT(EquipmentUnderTest) istechnicallycompliantwiththeFCCrequirements. Thisreportappliestoabovetestedsampleonlyandshallnotbereproducedinpartwithoutwritten approvalofShenzhenNTTTestingTechnologyCo.,Ltd. Preparedby(TestEngineer): CindyQin Reviewer(Supervisor): KenWu Approved(Manager): AbelYu ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26019600E1-2 SZNTT-TR832-0Tel:0755-27889935Web:http://www.ntt-testing.comPage4of15 1.SUMMARYOFTESTRESULT EMISSION DescriptionofTestItemStandard&LimitsResults MPE FCCPart1(1.1310)andPart2(2.1091) KDB680106D01WirelessPowerTransfer v04 Pass Note:N/AisanabbreviationforNotApplicable. ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26019600E1-2 SZNTT-TR832-0Tel:0755-27889935Web:http://www.ntt-testing.comPage5of15 2.GENERALINFORMATION 2.1.DescriptionofDevice(EUT) EUT:3in1wirelesscharger ModelNumber: JJT-C69,C69,C69-1,JJT-C69,JJT-C69-1 PowerRating:Input:Type-C:15V/3A WirelessOutput1:Phone5W/7.5W/10W/15W/25W WirelessOutput2:Earphone5W;WirelessOutput3:Watch1~3W Operation FrequencyforWPT :115-205KHz&326.5KHz&360KHz Modulation:MSK AntennaType:: CoilAntenna DateofReceived:May.08,2026 DateofTest:May.08,2026toMay.20,2026 ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26019600E1-2 SZNTT-TR832-0Tel:0755-27889935Web:http://www.ntt-testing.comPage6of15 2.2.TestSetup ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26019600E1-2 SZNTT-TR832-0Tel:0755-27889935Web:http://www.ntt-testing.comPage7of15 2.3.DescriptionofTestFacility 2.4.MeasurementUncertainty ParameterUncertainty Temperature ±1°C Humidity±5% DCandlowfrequencyvoltages±3% ElectricFieldEmissions(0.3-3.0MHz)  0.08V/m MagneticFieldEmissions(0.3-3.0MHz)  0.02A/m uT 0.01 SiteDescription EMCLab.:DesignationNumber:CN3446 TestFirmRegistrationNumber:129414 AccreditedbyANAB,Dec.19,2025 TheCertificateRegistrationNumberisAT-3446 NameofFirm: ShenzhenNTTTestingTechnologyCo.,Ltd…

Text truncated - open the document above for the full version.

TestReportTel:0755-27889935Web:http://www.ntt-testing.comPage 1 of 30 ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26019600E1-1 FCCPART15SUBPARTC 3in1wirelesscharger MODELNo.:JJT-C69 FCCID:2A2UK-JJT-C69 REPORTNO.:SZNTT26019600E1-1 ISSUEDATE:May.27,2026 Preparedfor DongguanJiajiatongPlasticMouldCo.,Ltd. No.10,QiaojiaoMiddleRoad,Pingshan188IndustrialZone,Tangxia Town,DongguanCity,GuangdongProvince,China Preparedby ShenzhenNTTTestingTechnologyCo.,Ltd. 1B,Building2,FactoryBuilding&103,Building3,FactoryBuilding,Dayang IndustrialPark,No.4,IndustrialAvenue,TangweiCommunity,FuhaiSub-district, Bao'anDistrict,ShenzhenCity,Guangdong,China TestReportTel:0755-27889935Web:http://www.ntt-testing.comPage 2 of 30 ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26019600E1-1 TABLEOFCONTENT TestReportDescriptionPage 1.SUMMARYOFTESTRESULTS..........................................................................................................................5 2.GENERALINFORMATION...................................................................................................................................6 2.1.DescriptionofDevice(EUT)............................................................................................................................6 2.2.DescriptionofSupportUnits............................................................................................................................6 2.3.IndependentOperationModes........................................................................................................................7 2.4.TestMode........................................................................................................................................................7 2.5.DescriptionofTestFacility...............................................................................................................................8 2.6.MeasurementUncertainty...............................................................................................................................8 3.MEASURINGDEVICEANDTESTEQUIPMENT.................................................................................................9 4.20DBBANDWIDTH............................................................................................................................................11 4.1.TestProcedure...............................................................................................................................................11 4.2.TestSetup......................................................................................................................................................11 4.3.TestResults...................................................................................................................................................11 5.POWERLINECONDUCTEDEMISSIONMEASUREMENT.............................................................................13 5.1.BlockDiagramofTestSetup.........................................................................................................................13 5.2.Limits.............................................................................................................................................................13 5.3.TestProcedure..............................................................................................................................................13 5.4.MeasuringResults.........................................................................................................................................14 6.RADIATEDEMISSIONTEST.............................................................................................................................17 6.1.MeasurementProcedure...............................................................................................................................17 6.2.TestSET-UP(BlockDiagramofConfiguration)............................................................................................17 6.3.RadiatedEmissionLimit................................................................................................................................18 6.4.MeasurementResult.....................................................................................................................................20 7.TESTPHOTOGRAPHSANDEUTPHOTOGRAPHS........................................................................................30 TestReportTel:0755-27889935Web:http://www.ntt-testing.comPage 3 of 30 ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26019600E1-1 TESTREPORTDESCRIPTION Applicant:DongguanJiajiatongPlasticMouldCo.,Ltd. Address: No.10,QiaojiaoMiddleRoad,Pingshan188IndustrialZone,Tangxia Town,DongguanCity,GuangdongProvince,China Manufacturer:DongguanJiajiatongPlasticMouldCo.,Ltd. Address: No.10,QiaojiaoMiddleRoad,Pingshan188IndustrialZone,Tangxia Town,DongguanCity,GuangdongProvince,China EUT: 3in1wirelesscharger ModelName:JJT-C69 Trademark:/ MeasurementProcedureUsed: APPLICABLESTANDARDS STANDARDTESTRESULT FCC47CFRPart15,SubpartC PASS TheaboveequipmentwastestedbyShenzhenNTTTestingTechnologyCo.,Ltd.Thetestdata,data evaluation,testprocedures,andequipmentconfigurationsshowninthisreportweremadeinaccordance withtheproceduresgiveninANSIC63.10-2020+Cor1+2023andtheenergyemittedbythesampleEUT testedasdescribedinthisreportisincompliancewithconductedandradiatedemissionlimitsofFCCRules Part15C Thetestresultsofthisreportrelateonlytothetestedsampleidentifiedinthisreport. Preparedby(TestEngineer): CindyQin Reviewer(Supervisor): KenWu Approved(Manager): AbelYu TestReportTel:0755-27889935Web:http://www.ntt-testing.comPage 4 of 30 ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26019600E1-1 ModifiedInformation VersionReportNo.RevisionDataSummary Ver.1.0SZNTT26019600E1-1May.27,2026OriginalVersion TestReportTel:0755-27889935Web:http://www.ntt-testing.comPage 5 of 30 ShenzhenNTTTestingTechnologyCo.,Ltd.ReportNo.:SZNTT26019600E1-…

Text truncated - open the document above for the full version.

Earphone Phone: Watch

Page 1 of 2 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China FCC ID:2A2UK-JJT-C69 Test Photo Page 2 of 2 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China