2A2W2-C1A-MWireless Mic

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.

NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD Room103, No.4 Yuanxiadi Road, Jiangxia, Baiyun District Guangzhou, Guangdong China Date: December 2, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2A2W2-C1A-M FRN: 0031274285 US Agent – Attestation Statement / Part 2.911(d)(7) NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD certifies, that as of December 2, 2025, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2A2W2-C1A-M NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD for FCC ID: 2A2W2-C1A-M Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD Designated Agent: FCC US Agent, LLC Company Representative: Yang Ying Designated Agent Representative: Tim Payne Signature: Email: [email protected] Tel: 020-83328693 Signature:

NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD Covered Equipment Certification Attestation Letter 12/2/2025 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2A2W2-C1A-M NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD (“ the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD (“ the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Yang Ying Title: Manager Company Name: NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD Date: 12/2/2025

NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD December 2, 2025 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2A2W2-C1A-M Product Name: Wireless Mic Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics Long-term confidential  Block diagram Long-term confidential  Operation description Long-term confidential These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature: Name Yang Ying Company Name NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD Address Room103, No.4 Yuanxiadi Road, Jiangxia, Baiyun District, Guangzhou, Guangdong, China Tel 020-83328693 Fax 020-83328693 Email [email protected]

FCCID: 2A2W2- C1A-M FCCID: 2A2W2- C1A-M FCCID: 2A2W2- C1A-M FCCID: 2A2W2- C1A-M FCCID: 2A2W2- C1A-M FCCID: 2A2W2- C1A-M FCCID: 2A2W2- C1A-M FCCID: 2A2W2- C1A-M

4.5cm 2.5cm Label Location FCC ID: 2A2W2-C1A-M NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD Product name: Wireless Mic Model No.: C1A-M This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCCID: 2A2W2-C1A-M FCCID: 2A2W2-C1A-M FCCID: 2A2W2-C1A-M FCCID: 2A2W2-C1A-M FCCID: 2A2W2-C1A-M FCCID: 2A2W2-C1A-M BLE ANT 2.4G ANT FCCID: 2A2W2-C1A-M

FCC ID: 2A2W2-C1A-M RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Worse case is as below: For 2.4G: [2440MHz: 0.463dBm(1.112 mW) output power] (1.112 mW /5mm) ·[√2.440 (GHz)]= 0.347 <3.0 for 1-g SAR For BLE: [2402MHz: 1.166dBm(1.308 mW) output power] (1.308 mW /5mm) ·[√2.402 (GHz)]= 0.405 <3.0 for 1-g SAR For 2.4G+BLE: 0.347+0.405=0.752 <3 Then SAR evaluation is not required

SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. 1 深圳市飞敏科技有限公司 ShenZhen FeiMin Technology CO.,LTD. 产品规格书 Product specification 客户 CUSTOMER: 产品名称 PRODUCTS: 321610—F05贴片天线 客户料号 PART NO: 产品型号 Spec.: F05 日期 Data: 2022.3.9 备注：承认盖章后请回复一份承认书（或复印件）给我司，其余由贵公司存档 REMARK:Please send us one(or copy)of this approval with stamp after accepting,other copies filed by the customer. 地址：深圳市宝安区西乡街道固戍社区恒南一路C栋厂房303室 ADD:Room 303,Building C,Hengnan one Road,Gushu community,Xixiang Street,Bao’an District,Shenzhen City 电话Tel: 0755-23035723 传真Fax: 0755-23036702 邮箱E-mail: [email protected] 网址HTTP:www.fmant.cn 客户 CUSTOMER 承认 ACCEPTED BY 审核 CHECKED BY 批准 APPROVED BY 供应商 SUPPLIER 拟制 PREPARED BY 审核 CHECKED BY 批准 APPROVED BY 杨轩 夏兴喜 马冬冬 SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 2 2 1. 项目信息Project Information 1.1. 外观尺寸Appearance and Dimensions Symbol Dimension (mm) L（长度） 3.2± 0.20 W（宽度） 1.6± 0.20 T（厚度） 1.0± 0.20 S（电极宽度） 0.4± 0.20 SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 3 3 1.2. 天线净空区面积antenna Clearance area 在设计天线时，应远离金属部件和不相关的部件，如电池、振荡器、防护罩、摄像头等，为天线留出 干净的空间。这个间隔简称为净空区。以下是我们建议预留的净空区面积大小。 When designing the antenna, it should be far away from metal components and irrelevant components such as batteries, oscillators, shields, cameras, etc. to leave a clean space for the antenna. This interval is called clearance area. The following is the size of clearance area we recommend to reserve. 天线型号（Model） 天线尺寸 （size） 净空区面积 Clearance area L*W(mm) A1（2.4G单极） 5.5*1.2*1.2 9.1*5.6 X5（2.4G单极） 5.2*2.2*1.0 8.7*6.5 X6（2.4G pifa） 3.2*1.6*1.0 7.0*6.0 D1（2.4G单极） 5.2*2.2*1.0 8.7*6.5 D2（2.4G单极） 5.2*2.2*1.0 8.7*6.5 D3（2.4G单极） 3.4*1.7*1.2 7.2*6.5 F01（2.4G pifa） 3.2*1.6*0.4 7.0*6.0 S2（2.4/5.8G双频） 7.0*3.0*2.0 9.0*7.0 U1 (UHF单极） 15.0*3.0*1.0 19.0*8.0 G2（GPS单极） 9.5*3.0*1.0 13.5*7.5 F05（2.4G pifa） 3.2*1.6*1.0 7.0*6.0 SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 4 4 1.3. 天线Demo测试板 Demo Test Board with Antenna(Unit:mm) 1.4. 匹配电路Matching Circuit 使用以下推荐的匹配和调谐元件值，在我们的标准25*60 mm评估板上，中心频率约为2440mhz。然 而，这些是典型的参考值，当电路板或零件供应商不同时，可能需要更改。 With the following recommended values of matching and tuning components,the center frequencies will be about 2440 MHz at our standard 25*60 mm evaluation board.However,these are typical reference values which may need to be changed when circuit boards or part vendors are diffierent. 3 4 2 1 系统匹配电路元件(村田) System Matching Circuit Component（Murata） Location Desciption Tolerance 1 0.75pF (0402) ±0.1pF 2 NC / 3 1.0pF (0402) ±0.1pF 4 NC / SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 5 5 2. 电特性Electrical Characteristics(25*60mm ground plane) 2.1.电子表格Electrical Table 特征Characteristics 规范Specifications 单位Unit 轮廓尺寸Outline Dimensions 3.2*1.6*1.0 mm 工作频率Working Frequency 2400-2500 MHz 电压驻波比VSWR <2 / 阻抗Impedance 50 Ω 极化Polarization 线极化 / 增益Gain 峰值Peak 2 dBi 效率Efficiency 50 % 2.2.电压驻波比与Smith 圆图 VSWR & Smith VSWR S11 SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 6 6 2.3.天线增益与效率 Gain and Efficiency 测试系统Test system Frequency (MHz) Gain (dBi) Efficiency (%) 2400 MHz 1.43 50.15 2410 MHz 1.38 50.78 2420 MHz 1.49 50.49 2430 MHz 1.34 50.43 2440 MHz 1.30 50.04 2450 MHz 1.57 52.50 2460 MHz 1.76 56.12 2470 MHz 1.89 57.29 2480 MHz 2.05 58.23 2490 MHz 2.06 55.99 2500 MHz 2.06 53.66 SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 7 7 2.4.天线辐射方向图Antenna radiation pattern [email protected] 2D-plane XOY @2.44GHz 2D-plane [email protected] 2D-plane YOZ @2.44GHz SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 8 8 3.包装信息Packaging Information 3.1. 胶带规范Tape specification 指数Index A0 B0 K0 P0 P P2 φD0 W E F T 尺寸 Dimension(mm) 1.85 ±0.1 3.50 ±0.1 0.85 ±0.1 4.00 ±0.1 4.00 ±0.1 2.00 ±0.1 1.50 +0.1 12.00 ±0.3 1.75 ±0.1 3.20 ±0.1 0.30± 0.05 1. 10链轮孔距累积公差±0.20。10 sprocket hole pitch cumulative tolerance ±0.20. 2. 在250毫米中，载体的拱度在1毫米以内。Carrier camber is within 1 mm in 250 mm. 3. 所有尺寸符合EIA-481-C要求。All dimensions meet EIA-481-C requirements. 4. 材料:透明PS。Material :Transparent PS. 5. 包装长度每7“卷:12.5米。Packing length per 7" reel :12.5Meters. 6. 组件加载/ 7”卷:3000个。Component load per 7" reel : 3000 pcs.(前后共预留120pcs) 3.2.卷规范Reel specification Index A B C D Dimension(mm) 13.3±0.3 100±0.3 330±0.3 24.5±0.3 SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 9 9 4.注意事项Notes 1) 产品应小心处理，以避免汗水和皮肤油脂损坏或污染。 Products should be handled with care to avoid damage or contamination from perspiration and skin oils. 2) 对于单个部件，强烈建议使用镊子或真空拾取。 The use of tweezers or vacuum pick up is strongly recommended for individual components. 5.储存条件Storage Conditions 1) 推荐产品从交货之日起6个月内使用。 Recommended products should be used within 6 months form the time of delivery. 2) 存储环境条件 Storage environment condition  温湿度条件:-10~40°C，30~70%RH。 Temperature and humidity conditions:-10~40°C and 30~70%RH.  包装材料应保存在空气中不含氯或硫的地方。 The packaging material should be kept where no chlorine or sulfur exists in the air.  产品应储存在仓库内，无热震、振动、阳光直射等。 Products should be storage in thewarehouse without heat shock,vibration,direct sunlight and so on.

ALPHA's reports is using a digital certificate that is trusted on Adobe's official server. If there is no digital certificate or the digital certificate shows damaged in your report. Please do not accept the report. E-mail: [email protected] Tel: 400-8300-895 Website: http://www.a-lab.cn FCC TEST REPORT FCC ID: 2A2W2-C1A-M On Behalf of NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD Wireless Mic Model No.: C1A-M Prepared for : NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD Address : Room103, No.4 Yuanxiadi Road, Jiangxia, Baiyun District, Guangzhou, Guangdong, China Prepared By : Shenzhen Alpha Product Testing Co., Ltd. Address : Building i, No.2, Lixin Road, Fuyong Street, Bao'an District, 518103, Shenzhen, Guangdong, China Report Number : A2510262-C06-R01 Date of Receipt : October 30, 2025 Date of Test : October 30, 2025 – December 5, 2025 Date of Report : December 11, 2025 Version Number : V0 Result Pass Page 2 of 64 Report No.: A2510262-C06-R01 TABLE OF CONTENTS Description Page 1. Summary of Standards And Results ------------------------------------------------------------ 6 1.1. Description of Standards and Results ----------------------------------------------------- 6 2. General Information ---------------------------------------------------------------------------------- 7 2.1. Description of Device (EUT) ----------------------------------------------------------------- 7 2.2. Accessories of Device (EUT) ---------------------------------------------------------------- 8 2.3. Tested Supporting System Details---------------------------------------------------------- 8 2.4. Block Diagram of Test -------------------------------------------------------------------------- 8 2.5. Test Mode Description ------------------------------------------------------------------------- 9 2.6. Test Conditions ---------------------------------------------------------------------------------- 9 2.7. Test Facility --------------------------------------------------------------------------------------- 9 2.8. Measurement Uncertainty ------------------------------------------------------------------ 10 2.9. Test Equipment List--------------------------------------------------------------------------- 11 3. Spurious Emission ---------------------------------------------------------------------------------- 13 3.1. Test Limits --------------------------------------------------------------------------------------- 13 3.2. Test Procedure --------------------------------------------------------------------------------- 14 3.3. Test Setup --------------------------------------------------------------------------------------- 15 3.4. Test Results------------------------------------------------------------------------------------- 17 4. RF CONDUCTED SPURIOUS EMISSIONS -------------------------------------------------- 21 4.1. Block diagram of test setup ---------------------------------------------------------------- 21 4.2. Limits --------------------------------------------------------------------------------------------- 21 4.3. Test procedure --------------------------------------------------------------------------------- 21 4.4. Test result --------------------------------------------------------------------------------------- 21 5. Power Line Conducted Emission -------------------------------------------------------------- 25 5.1. Test Limits --------------------------------------------------------------------------------------- 25 5.2. Test Procedure --------------------------------------------------------------------------------- 25 5.3. Test Setup --------------------------------------------------------------------------------------- 25 5.4. Test Results------------------------------------------------------------------------------------- 25 6. Duty Cycle --------------------------------------------------------------------------------------------- 28 6.1. Block diagram of test setup ---------------------------------------------------------------- 28 6.2. Test Procedure --------------------------------------------------------------------------------- 28 6.3. Test Results------------------------------------------------------------------------------------- 28 7. Conducted Maximum Output Power ---------------------------------------------------------- 31 7.1. Test limits ---------------------------------------------------------------------------------------- 31 7.2. Test Procedure --------------------------------------------------------------------------------- 31 7.3. Test Setup --------------------------------------------------------------------------------------- 31 7.4. Test Results------------------------------------------------------------------------------------- 31 8. Peak Power Spectral Density ------------------------------------------------------------------- 34 8.1. Test limits ---------------------------------------------------------------------------------------- 34 8.2. Test Procedure --------------------------------------------------------------------------------- 34 8.3. Test Setup --------------------------------------------------------------------------------------- 34 8.4. Test Results------------------------------------------------------------------------------------- 34 9. Bandwidth ---------------------------------------------------------------------------------------------- 37 9.1. Test limits ---------------------------------------------------------------------------------------- 37 9.2. Test Procedure --------------------------------------------------------------------------------- 37 9.3. Test Setup --------------------------------------------------------------------------------------- 37 9.4. Test Results------------------------------------------------------------------------------------- 37 Page 3 of 64 Report No.: A2510262-C06-R01 10. Band Edge (Conducted) -------------------------------------------------------------------------- 41 10.1. Test limits -----------------…

Text truncated - open the document above for the full version.

Page 56 of 64 Report No.: A2510262-C06-R01 Page 57 of 64 Report No.: A2510262-C06-R01 Page 58 of 64 Report No.: A2510262-C06-R01 Page 59 of 64 Report No.: A2510262-C06-R01 2.4G ANT Page 60 of 64 Report No.: A2510262-C06-R01 BLE ANT Page 61 of 64 Report No.: A2510262-C06-R01 Page 62 of 64 Report No.: A2510262-C06-R01 Page 63 of 64 Report No.: A2510262-C06-R01 Page 64 of 64 Report No.: A2510262-C06-R01 ---------END OF REPORT-------

ALPHA's reports is using a digital certificate that is trusted on Adobe's official server. If there is no digital certificate or the digital certificate shows damaged in your report. Please do not accept the report. E-mail: [email protected] Tel: 400-8300-895 Website: http://www.a-lab.cn FCC TEST REPORT FCC ID: 2A2W2-C1A-M On Behalf of NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD Wireless Mic Model No.: C1A-M Prepared for : NAHUO (GUANGZHOU) INTELLIGENT MANUFACTURING CO., LTD Address : Room103, No.4 Yuanxiadi Road, Jiangxia, Baiyun District, Guangzhou, Guangdong, China Prepared By : Shenzhen Alpha Product Testing Co., Ltd. Address : Building i, No.2, Lixin Road, Fuyong Street, Bao'an District, 518103, Shenzhen, Guangdong, China Report Number : A2510262-C06-R02 Date of Receipt : October 30, 2025 Date of Test : October 30, 2025 – December 5, 2025 Date of Report : December 11, 2025 Version Number : V0 Result Pass Page 2 of 49 Report No.: A2510262-C06-R02 TABLE OF CONTENTS Description Page 1. Summary of Standards And Results ------------------------------------------------------------ 6 1.1. Description of Standards and Results ----------------------------------------------------- 6 2. General Information ---------------------------------------------------------------------------------- 7 2.1. Description of Device (EUT) ----------------------------------------------------------------- 7 2.2. Accessories of Device (EUT) ---------------------------------------------------------------- 8 2.3. Tested Supporting System Details---------------------------------------------------------- 8 2.4. Block Diagram of Test -------------------------------------------------------------------------- 8 2.5. Test Mode Description ------------------------------------------------------------------------- 9 2.6. Test Conditions ---------------------------------------------------------------------------------- 9 2.7. Test Facility --------------------------------------------------------------------------------------- 9 2.8. Measurement Uncertainty ------------------------------------------------------------------ 10 2.9. Test Equipment List--------------------------------------------------------------------------- 11 3. Spurious Emission ---------------------------------------------------------------------------------- 13 3.1. Test Limits --------------------------------------------------------------------------------------- 13 3.2. Test Procedure --------------------------------------------------------------------------------- 14 3.3. Test Setup --------------------------------------------------------------------------------------- 15 3.4. Test Results------------------------------------------------------------------------------------- 17 4. RF CONDUCTED SPURIOUS EMISSIONS -------------------------------------------------- 21 4.1. Block diagram of test setup ---------------------------------------------------------------- 21 4.2. Limits --------------------------------------------------------------------------------------------- 21 4.3. Test procedure --------------------------------------------------------------------------------- 21 4.4. Test result --------------------------------------------------------------------------------------- 21 5. Power Line Conducted Emission -------------------------------------------------------------- 25 5.1. Test Limits --------------------------------------------------------------------------------------- 25 5.2. Test Procedure --------------------------------------------------------------------------------- 25 5.3. Test Setup --------------------------------------------------------------------------------------- 25 5.4. Test Results------------------------------------------------------------------------------------- 26 6. Duty Cycle --------------------------------------------------------------------------------------------- 28 6.1. Block diagram of test setup ---------------------------------------------------------------- 28 6.2. Test Procedure --------------------------------------------------------------------------------- 28 6.3. Test Results------------------------------------------------------------------------------------- 28 7. Conducted Maximum Output Power ---------------------------------------------------------- 31 7.1. Test limits ---------------------------------------------------------------------------------------- 31 7.2. Test Procedure --------------------------------------------------------------------------------- 31 7.3. Test Setup --------------------------------------------------------------------------------------- 31 7.4. Test Results------------------------------------------------------------------------------------- 31 8. Peak Power Spectral Density ------------------------------------------------------------------- 34 8.1. Test limits ---------------------------------------------------------------------------------------- 34 8.2. Test Procedure --------------------------------------------------------------------------------- 34 8.3. Test Setup --------------------------------------------------------------------------------------- 34 8.4. Test Results------------------------------------------------------------------------------------- 34 9. Bandwidth ---------------------------------------------------------------------------------------------- 37 9.1. Test limits ---------------------------------------------------------------------------------------- 37 9.2. Test Procedure --------------------------------------------------------------------------------- 37 9.3. Test Setup --------------------------------------------------------------------------------------- 37 9.4. Test Results------------------------------------------------------------------------------------- 37 Page 3 of 49 Report No.: A2510262-C06-R02 10. Band Edge (Conducted) -------------------------------------------------------------------------- 41 10.1. Test limits -----------------…

Text truncated - open the document above for the full version.

FCCID: 2A2W2-C1A-M Radiated Emission FCCID: 2A2W2-C1A-M Conducted emission